How to modify program sequence

Function of program
A current is first injected into the resistive sample, voltage is measured across it. If the measured voltage is not within the range (0.5-5V), the program will have to automatically adjust the current such that the measured voltage is within the range specified. However, existing program will only inject the current after voltage is measured, which does not fulfil our requirement. How do I modify my program so that the program sequence will execute in this way? Pls help,Thanks!!
Attachments:
kei2000c.zip ‏534 KB
kei220v4.zip ‏110 KB
6053_Final_Current1.zip ‏43 KB

Are you looking tfor a continous adjustment unitl the level is acceptable?
You might want to try passing the data through some case statemenst and
adjusting it there, then continuing on with the program after it has
adjusted from that point.
I amnot quite sure what you mean, but I hope it helps.
"Clara" wrote in message
news:[email protected]..
> Function of program
> A current is first injected into the resistive sample, voltage is
> measured across it. If the measured voltage is not within the range
> (0.5-5V), the program will have to automatically adjust the current
> such that the measured voltage is within the range specified.
> However, existing program will only inject the current after voltage
> is measured,
which does not fulfil our requirement. How do I modify my
> program so that the program sequence will execute in this way? Pls
> help,Thanks!!

Similar Messages

How we modify print program in script

hi gurus.
how we modify print program in script, please tell elaborately.

Hi ..
first of all ... u have to check which is the print program for the given layout...
how u can find out is ... in NACE transaction... for certain o/p type .. there will be configuration done against the layout .. i mean for the particular layout .. a print program wud be assigned.
another way to find out the print program is thru table TNAPR..
once u find out the print program.. make sure u have to make changes in the print program .. i mean once u decide "for the requirement u have to make changes to the print program.
Reward points if it is useful.
Thanks,
Manjunath MS

How to modify fbz5 standard program output form

Hi friends
I need to modify the output print form of the standard program FBZ5 how to modify it.
where is the driver program for this form.

Selva,
Below is the path in SPRO to find the Driver Program and the Form for the respective Company Codes based on the Correspondence types.
SPRO>>Financial Accounting (New)>>Financial Accounting Global Settings ( New ) >> Correspondence
or
You can put a break point on the FM FORM_CHECK and run FBZ5 in D or Q.
K.Kiran.

How can we find out Standard Modified Programs

HI Friends,
How can we find out the Standard modified program.
The Standard Programs which are modified by user using Acess Key.
Thanks,

In table ADIRACCESS you will find all objects for which an access key has been used.
regards,
John.

How to modify standard programs

HI FRIENDS..........
is there any way to modify standard programs.....

Hi Suresh,
in the past it was necessary to modify standard programs. Today SAP offers lots of possibilities to modify programs without doing what SAP calls MODIFICATION.
Have a look at the <a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/94/9cdc40132a8531e10000000a1550b0/frameset.htm">Enhancement Framework</a>, especially the different <a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/70/63da4023a28631e10000000a1550b0/content.htm">Enhancement Technologies</a>
If you do not understand everything, don't worry: Nobody does but it gives you some hints.
Let us know why and where you think about modification. I'm convinced there are many nice solutions on hand.
Regards,
Clemens

How to modify the coding part of KE30 reports ?

How to modify the coding part of KE30 reports ,
so that I can be able to restrict report output based on sales office.
I am unable to find out the program name also.
Regards
Anubhav

>
Venkat Reddy wrote:
> Hi,
>
> If u want to know the program running for KE30 just go to SE93 and give KE30
> and click on display you can see the program running for KE30 will be SAPMKCEE.
> I think this is much simpler :-).
>
> Rather than change the standard report try to prepared your own that will be more
> comfortable since it will be complex task to achieve editing the standard program.
> Good Luck
>
> Regards
> VEnk@
>
> Edited by: Venkat Reddy on Dec 11, 2009 4:52 PM
Venkat,your answer is much simpler If the OP knows there is a tcode Se93, what if he/she does not know it??
P.S: Just a thought.
Regards.
Vishwa.

How do I program Instrument I/O Assistant to read a variable in the input string?

How do I program the Instrument I/O Assistant to read a variable in the input string? I can manually type in the string using the Instrument I/O Assistant using the "Write" or "Query" tools but I do not know how to send a variable input to the Instrument I/O Assistant so that variable can be used inside the "Write" string. For example, I have a power supply whose current I want to set to X Amps. I can type the command "PC10" to program the current to 10 Amps, however I want to be able to program it at any arbitrary current. How do I feed the value X into the code for this purpose?

You can't. The assistant was designed to be a quick and dirty way to do some basic communication with an instrument. You can turn it into a VI (right click and select Open Front Panel) and modify it so that your write string is an input to the VI or use it as a template and create your own code with VISA Read and Write primatives.

How to modify a pod in dashboard component?

Hi
I am new to flex and programming in general. So please do forgive me if I do not express my query clearly or with the right info.
I am trying to build an application to show case photographs and one of the components I am using is the Dashboard built by WASI and can be seen here. It has several pods but I would like to have one of the pods load up with my own default position, width and height yet still retain the characteristics of minimizing, maximizing & drag and drop. Other than through the pods.xml file, I do not know how to modify (or which other file I should modify for that matter) so that when the application loads, it always starts with the particular pod at my desired height (top to bottom), width (about 1/4 of screen real estate) and position (left side of the screen)
Below is the pods.xml file and attached is the project zip file.
<?xml version="1.0" encoding="utf-8"?>

<views>
    
    <view
        id="view0"
        label="Sales">
        <pod
            id="pod00"
            type="chart"
            title="Yearly Revenue"
            dataSource="data/revenue.xml"
            selectedViewIndex="1"
            valueField="value"
            categoryField="month"
            dataTipUnitLabel="$*M"
            dataTipLabelField="month"/>
        <pod
            id="pod06"
            type="pieChart"
            title="Revenue by Region"
            dataSource="data/revenue_by_region.xml"
            valueField="value"
            categoryField="region"
            dataTipUnitLabel="$*M"
            dataTipLabelField="region"/>
        <pod
            id="pod01"
            type="chart"
            title="Yearly Profit"
            dataSource="data/profit.xml"
            valueField="value"
            categoryField="month"
            dataTipUnitLabel="$*M"
            dataTipLabelField="month"/>
        <pod
            id="pod02"
            type="form"
            title="To Do"
            dataSource="data/tasks.xml"
            labels="Name,Date,Description"
            dataFields="name,date,description" />
        <pod
            id="pod03"
            type="list"
            title="Company News"
            dataSource="data/news.xml" />
        <pod
            id="pod04"
            type="form"
            title="Sales Pipeline"
            dataSource="data/pipeline.xml"
            selectedViewIndex="1"
            labels="Name,Date,Description"
            dataFields="name,date,description" />
        <pod
            id="pod05"
            type="chart"
            title="Projected Revenue"
            dataSource="data/projected_revenue.xml"
            valueField="value"
            categoryField="month"
            dataTipUnitLabel="$*M"
            dataTipLabelField="month"/>
    </view>
Thank you very much for any help you may provide.
Best regards
Vanery

hi,
u may upload a file from the desktop in ur webdynpro .. thn u can save it in database and can download accordingly..
1.create a node 'FILEUPLOAD' with 2 attributes
a) FILECONTENT type XSTRING
b) FILENAME type STRING
2. Create a fileuplaod uielement
a) bind the data property with attribute 'FILECONTENT'
b) bind the filename property with attribute 'FILENAME'
3. Create a button 'UPLOAD'
a) create the action method for this button and save the contents of file in database
Data l_node type ref to if_wd_context_node.
Data l_stru type wd_this->elements_cn_fileupload.
l_node = wd_context->get_child_node( 'FILEUPLOAD' ).
l_node->get_static_attributes( importing static_attributes = l_stru ).
"save l_stru-fielcontent in database. Your file will be saved in the database in XSTRING format.
Now when you want to display this file;
1. Create a Node 'FILEDOWNLOAD' with 1 attribute
a) FILE type XSTRING
2. Create a filedownload uielement
a) bind the data property with the attribute 'FILE'
Fetch the file from database and set the File attribute of the filedownload uielemnt to display the file.
regards,
Amit

How to modify regional settings and keep Acrobat 9.4.1 working?

When I modify the regional settings on my W7 PC (i.e. switching the decimal symbol and digit grouping symbol from dot to comma and vice-versa), I cannot print to Adobe PDF Printer nor can I convert Office documents to PDF files anymore. It seem like the joboptions files were getting corrupted (I can see read errors).
Can anyone advise on how to modify the regional settings and keep Acrobat 9.4.1 Pro working properly? Do I have to adopt the joboptions files (and if yes, how?)?
Thank you for your advice!

The defaults for three are blank entries. That is there are no defaults, The only way to get those back to being blank would be to delete your preferences file ( Home->Library->Preferences->com.apple.Aperture,plist ) and possibly the files in *Home->Library->Program Support->Aperture* (but I don't think you would need to do these, not sure.)
However before you do this you should know there is no drawback to having these entries filled in. Aperture would only attempt to use them if you actually selected them while using Aperture. It won't be looking for them on startup. And if the programs pointed to by these entries no longer exist on your system Aperture won't even fill in the names in the menu items where these are pointed to ( *Photos->Edit with* for example)

How to modify a part of task parameters via worklist (not all paramenters)?

I am making a demo of showing the functions of human workflow / worklist using Oracle SOA Suite. The following process is not a real project. But I have some questions about how to modify parameters in worklist and jdeveloper. Please help me.
I create a BPEL with human workflow. It has 2 human tasks.
The first human task is a single approver type and the parameters contents can be modified via worklist. The user is oc4jadmin.
If oc4jadmin rejects it, the process will go to the second human task.
The second human task is a sequential lists of approvers type and the parameters contents can be modified via worklist. 3 users (the order is : jcooper -> jlondon-> tolstoy) can access it. The process is able to abrupt completion if anyone rejects it.
After the process is invoked in BPEL control,
1, oc4jadmin login worklist and modified the data, than reject it.
2, jcooper can login worklist and changed the data, save it, and approve.
3, jlondon login, view data, change data, and save it. However, if jlondon modified the
My questions are as follow:
1, If oc4jadmin rejects the task in worklist, how can I set the parameter cannot be modified and saved.
2, schema:
<schema attributeFormDefault="unqualified"
     elementFormDefault="qualified"
     targetNamespace="http://xmlns.oracle.com/BPEL_single_sequential"
     xmlns="http://www.w3.org/2001/XMLSchema"
xmlns:vv="http://xmlns.oracle.com/BPEL_single_sequential">
     <element name="BPEL_single_sequentialProcessRequest">
          <complexType>
               <sequence>
                    <element name="input" type="vv:complexType1" maxOccurs="unbounded"/>
               </sequence>
          </complexType>
     </element>
     <element name="BPEL_single_sequentialProcessResponse">
          <complexType>
               <sequence>
                    <element name="result" type="string"/>
               </sequence>
          </complexType>
     </element>
<complexType name="complexType1">
<sequence>
<element name="pid" type="string"/>
<element name="ptitle" type="string" maxOccurs="unbounded"/>
</sequence>
</complexType>
</schema>
In the worklist, the user can add another pid and leave the ptitle empty. In the schema, the ptitle (minOccurs=1) should appear at least once. How can I set that, if the user add another pid and must add at least one ptitle before saving it?
3, One element likes gender=male/female. In the worklist form, the default graphic component is an input field. How can I set the component to a dropdown list and it highlight value.
4, The default form is jsp file and it is beautiful. Could I make a jspx page and replace the jsp page? How to replace the jsp to jspx?
5, If I use sequencial approver type for the human task, how can I set various page layout? For example, user 1 can view and modified all parameters. User 2 can view some part of the parameters and changes it. User 3 can view all paramters but can just modified some of them?
Thanks a lot!
Edited by: [email protected] on 2009-3-10 上午12:39
Edited by: [email protected] on 2009-3-10 上午12:44
Edited by: YE

Hi,
all what you asked about can be done through java script.

How to modify a webservice in SICF on a productive system

I hope I am in the right forum.
For an external webclient program I created a webservice with automatic login. I transported all in production. But in production user and password are different.
How to modify now? To change the service in development is not possible because neither the client nor the user is existing... and SICF is testing them both.
I opened the system and made my modification and it works. But in my point of view it's a work around and not really the state of the art...
Somebody has an idea to do it in a better way?

Hi,
How did you create the web service? I would suggest to have a look at this web log:/people/thomas.jung3/blog/2005/05/09/abap-webservices-logon-language-processing
It is about multiple languages, but it can be used for your login problem too.
Eddy

How to modify a variant

How to modify the variant for a batch job, which is to include 2 countries for a job. Please let me know the tcode.

use t.code SM37.
Enter the job name and execute. Then in the output, check the job and click on step button. Keep the cursor on the program name for which you want to change the variant. Then go to menu Goto->varinats.
Click on the values button at the top. There you can change the values. Once changed click on save button.
Alternatively you can use t.code SE38, enter the program name here. Then execute. Click on the variants button and select the variant. Then change the values and click on save button. By this way you can overwrite the variant value.
Regards

XCode How to modify menu item

Newbie here. Have been searching around not have not been able to find a example that shows how to modify a menu item dynamically.. eg. Like in the menu bar the battery menu info is able to show how much battery life is left.

Have you looked over Views in Menu Items in +Application Menu and Pop-up List Programming Topics for Cocoa+, or the MenuItemView sample app?

On slide No. 13 of my Keynote presentation, I have varous pictures that go through automatically just as I programmed them, but if I I want to get by clicking to the next slide , it does not let me. How can I program so when I want goes to next slide?

On slide No. 13 of my Keynote presentation, I have varous pictures that go through automatically just as I programmed them, but if I I want to get by clicking to the next slide , it does not let me. How can I program so when I want goes to next slide?

Keynote is programmed to execute all of the effects in a build sequence before it will move to the next slide.
If you want tobe able to move to the next slide at any time in a sequence of builds, you will need to set all of the builds on that slide to: "on click". You will then need to execute each build by pressing the space bar or click the left mouse button for each object.

Urgent:How to modify a script without changing the print programme

Hi all,
Can any body pls tell me <b>How to modify a script without changing the print programme</b>
Give m esome real time examples.
Good points willbe rewarded
Thanks

Hi
You can write a external Subroutine to fetch the extra data into the script program
see the following sample code
How to call a subroutine form SAPscripts
The Form :
/:PERFORM CDE_CENT IN PROGRAM ZKRPMM_PERFORM_Z1MEDRUCK
/:USING &EKKO-EBELN&
/:CHANGING &CDECENT&
/:ENDPERFORM
The report :
REPORT zkrpmm_perform_z1medruck .
DATA : BEGIN OF it_input_table OCCURS 10.
INCLUDE STRUCTURE itcsy.
DATA : END OF it_input_table.
déclaration de la table output_table contenant les
variables exportées
DATA : BEGIN OF it_output_table OCCURS 0.
INCLUDE STRUCTURE itcsy.
DATA : END OF it_output_table.
DATA : w_ebeln LIKE ekko-ebeln,
w_vbeln LIKE vbak-vbeln,
w_zcdffa LIKE vbak-zcdffa.
FORM CDE_CENT
FORM cde_cent TABLES input output.
it_input_table[] = input[].
it_output_table[] = output[].
READ TABLE it_input_table INDEX 1.
MOVE it_input_table-value TO w_ebeln.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = w_ebeln
IMPORTING
output = w_ebeln.
SELECT SINGLE zcdffa FROM ekko
INTO w_zcdffa
WHERE ebeln = w_ebeln.
it_output_table-name = 'CDECENT'.
MOVE w_zcdffa TO it_output_table-value.
MODIFY it_output_table INDEX 1.
output[] = it_output_table[].
ENDFORM.
COPING SCRIPT
There are some Standard Sap Scripts in SAP. We cant directly execute them in scripts we have to use some T-codes and by giving some input to the required fields we can see the output printform.
I will show one example. There are some Standard Sap Scripts such as MEDRUCK which is a standard Sap Script for Purchase Order and RVINVOICE01 for billing and so on...
To see oupt of MEDRUCK go to T-code ME9F give purchase order number and execute select one number and click on dislplay messages button on application tool bar you can find the print form of MEDRUCK.
You cannot change the Standard Sap Scripts but you can use Standard Sap Scripts and Copy them to userdefined Script and can make changes to them and replace standard Sap Script with usedefind script.
Ex: Go to SE71,
on menu bar u find Utilities->copy from Client. click on it u ll find new screen showing
Form name:
Source Clinet:
Target Form:
give Form name as usedefined form name EX: ZFORM1
Source client as 000 and
Target form as MEDRUCK.
execute.
Now, the standard from MEDRUCK is copyied to your form ZFORM1.
NOW, go to SE71 and give form name as ZFORM1 and do some changes to the form such as adding logo any thing. save and Activate.
Now, you have done changes to the Form ZFORM1 and u have to replace your form with standard SAP Script.
Go to NACE Transaction.
on Applications select EF for purchase order and click Output types button on application tool bar.
now select NEU as output types dobule click on Processing Routines.
now click on Change option on application tool bar and on right side u find MEDRUCK in form place replace MEDRUCK with ZFORM1 and SAVE.
go back twice and now go to T-code ME9F give the purchase order number and execute and select one option and click on display messges button .
you will find the changes that you have done in ZFORM1. so we cant chage the standard Sap Scripts by copying the Standard Sap Scripts we can chage and replace with our forms
Refer
https://forums.sdn.sap.com/click.jspa?searchID=4089895&messageID=3239299
Regards
Message was edited by:
Kiran Sure(skk)

How to modify program sequence

Similar Messages

Maybe you are looking for