How to modify the database name

Hi people
Im a developer and it's the first time that I use the Xe version of oracle. I need to modify the database name but I don't know how to make this. Im finding the commands but I don't meet this.
Anyone can help me?
Thanks
Best Regards

Hi,
XE is XE is XE ... ;-)
If you'd like to rename it you may get a database license for at least a STANARD EDITION ONE database, upgrade your XE to SE-ONE and then rename your database.
But (as it has been noted before) for obvious reasons there's no way to rename an XE database to something else :-)
Kind regards
Mike

Similar Messages

  • How to modify the database by Oracle-ridc-client

    How to modify the database by Oracle-ridc-client

    First of all, from your question it is not very clear what kind of modifications you intend to do - one correct answer to your question could be "call any non-read-only service", which will result as insert/update/delete to a table somewhere. My guess is that this is not the answer you are looking for.
    While working with RIDC (or CIS to answer your other thread at once) you have to understand that you integrate primarily with the application layer of your solution. If you want to modify the database scheme, you might, for instance, add a new metadata field - this is OK, because there is a service that you may call to achieve that. On the other hand you might want to change the db scheme directly (e.g. add a new column to a standard table); here neither RIDC, not CIS will help you unless you create a custom (server-side) service that you will call. Note, however, that you should be doing this only if you are really sure what you are doing.

  • How to know the database name?

    I have installed oracle 10g and developer suite.. I am trying to create forms now.
    But its error out: TNS: could not resolve the connect identifier specified!!!
    I forgot the Data base name.. How can I know the database name??
    Thanks in Advance!!!!!!!!!!

    I have installed oracle 10g and developer suite.. I'm sorry, but you are going to have be more specific as what you installed!
    If you installed Oracle Database 10g Express Edition then it is not (by default) configured to allow a connection through SQL*Plus. It is primarily configured to open a connection through the "Go To Database Homepage" url/link in the Start Menu => Oracle Database 10g Express Edition => Go To Database Homepage. In order to connect to the database from SQL*Plus (which is included with Oracle Developer Suite 10g) you will need to run the Net Configuration Assistant to configure your TNSNAMES.ora and SQLNET.ora files. Go to Start Menu => Oracle - DevSuiteHome1 => Configuration and Migration Tools => Net Configuration Assistant to run the assistant. After you run the assistant, test to make sure can connect through SQL*Plus before you attempt to connect through Forms.
    Hope this helps,
    Craig...

  • How to create the database name

    May I know,How to create database name?It is create net service name is a create database name?My database instance is PSM2006 and i connect connect user1/user1@psm2006 . Can i create another instance such as bomba ?
    I want to save my oracle table in database name 'Operasi'
    and save another table in database name 'Kawalan'
    May i know,how to create and then view the database name?
    I am new in Oracle 9i client and Oracle 9i server install on server machine

    In Oracle:
    A database is a group of files that can hold data;
    An instance is the running software and memory to control one database;
    A schema is a collection of tables (and other things), often related to one application;
    A user is a security mechanism that allows privileges and may own one schema.
    Aa schema-owning user may grant access to the schema to any other users.
    A tablespace is like a disk - just a place to store things. And just like any operating system or computer, which can have many disks, a database can have many tablespaces.
    (Tablespaces were created when disks were small and one table easily filled up more than one disk. So tablespace was invented to become a logical disk, or space for tables, that could combine multiple disks.)
    Many schemas can use one tablespace to store their tables and indexes. Just like placing a file on a specific disk, each table can be assigned individually to a specific tablespace.
    So - you want to create a user 'Operasi' and a user 'Kawalan'. Each user should become a schema owner, simply by creating tables and indexes (and other things).
    Then you can create other users, 'Joe', 'Jeff', 'Tom' and 'Betty' and give them access to the tables in the 'Operasi' schema. Create users 'Buhlan', 'Karla', 'Gronk' and give them access to the tables in 'Kawalan'. And create users 'Flox' and 'Gnorf' and give them access to the tables in both 'Operasi' and 'Kawalan'.
    Oracle really works best if you only have one instance, with one database, on one computer.
    It is really sad that other, more recent, database groups, corrupted the terminology - the terms database ans schema come from the CODASYL days (over 30 years ago) - thereby making things much more difficult to understand by having several confusing meanings. (If you have used SQL Server, the term database is similar to Oracle's schema.)

  • How to modify the window name and field name in standard oracle forms

    Hi All,
    I am new to the forms. I would like to ask how to modify the standard form window name "Subinventories" to "INV Subinventories" in EBS.
    Please help.
    Thank you.
    Regards,
    Diane

    hi
    plz move your thread to EBS forum.
    sarah

  • How to modify the window name and field name in EBS -Subinventories

    Hi All,
    I would like to ask how to modify the standard form window name "Subinventories" to "INV Subinventories" in EBS.
    Thanks in advance.
    Regards,
    Diane

    Hi 873422 ,
    Thank you for immediate response. I tried to do the instruction and only the menu has been changed. I would like to change the window screen.
    Navigation: Inventory responsibility
    1. Setup->Organization->Subinventories.
    Then the window pop-up. I would like to change the window name "Subinventories Summary".
    Thanks.
    Regards,
    Diane
    Edited by: peopsquik08 on 18-Jun-2012 01:18

  • How to find the database name?

    Hi,
    I have a little problem with my database under DB2.
    I acces this database through the ODBC with the name TESTALIAS, but the real name of the database is TEST. So what I need to find out is if there is a possibility to get the real name of the database.
    I used the com.ibm.db.DatabaseConnection class for the connection, but there seems nothing to indicate me the real name of this database.
    Have you any idea??? maybe another class that do this?
    thanks,
    alina

    if somebody is interested in, the following SQL Statement gets the real database name out and not the alias:
    SELECT CURRENT SERVER FROM one_table_name
    I don't know if the register CURRENT SERVER work for all DB environment, but for DB2 ist does.
    cheers,
    alina

  • How to get the database owner name in T-SQL script

    Hello, All!
    I want to get the database ower name (in format DOMAIN\user) by through T-SQL script. But SELECT * FROM sys.databases returns only owner_sid.
    Please show me a way - how to get the owner name, if you have only owner_sid. Or, may be, somebody know another way ?
    Andy Mishechkin

    SELECT suser_sname( owner_sid ), * FROM sys.databases
    http://www.t-sql.ru

  • How can i change the database name on MaxDB?

    Hello.  I need to do a homogeneous copy where the source system is the productive system and the target system is the quality system. Therefore after to restore the data backup i need to change the database name of quality system (from CLP to CLQ) but i'm not sure that it could be possible because in the MaxDB documentation i didn't found nothing about that. please can you tell me if it is possible and how i change it?
    I work with MaxDB 7.6.04.11.  Thanks for your help.

    > I will try to explain better: the SID of the source database is CLP and the SID of the target database is CLQ, when you say "once you restore the DB, it will use the new SID", i understand that the new SID in the target database would CLP or am i wrong? and i need that the SID in the target database remains CLQ after the restore.
    Hi Ivonne,
    what you've described as your requirement is exactly what will happen, when you just perform the procedure that Eric described to you.
    A recovery won't change the SID of the instance you perform the recovery to.
    All it does is: take the instance as is and load the data pages to the data area. Afterwards the log files may be recovered.
    Think of the instance as a kind of container for your database.
    The instance itself is not the database - so the SID does not change with the content of the database.
    Hmm... why not simply try it?
    Create a little test instance and back it up.
    Create another instance with a different name and recover the backup of the first instance.
    You will still have both instances, each with its original name.
    regards,
    Lars

  • How does one find out the database name , service name in a database

    hi,
    how do u find out the database name , service name , SID in a database.
    Please reply.
    Thanks ,
    Regards,
    RC

    This particular information is available in the view V_$PARAMETER owned by SYS. But you can also login with Server Manager as user INTERNAL and run:
    SHOW PARAMETERS
    The entries pertaining to the naming of the database are:
    1. db_name
    2. db_domain
    3. db_name
    4. instance_name
    5. service_names
    GLOBAL_NAME is a static (not changing) Data Dictionary view which has just 1 attribute (column) called GLOBAL_NAME.
    When you run:
    select GLOBAL_NAME from GLOBAL_NAME;
    You are returned the full global name of the database, i.e. the db_name and the db_domain joined together by dot (.) For e.g. if your db_name = mgmt and db_domain = tech.co.in, then your global_name will be MGMT.TECH.CO.IN.
    Ciao.
    null

  • How to modify the names of existing Pages styles?

    In Pages 5.5.2 under Yosemite 10.10.2.
    1. How to modify the name of an existing style in both the Main styles list, and also in the Bullets & Lists styles list?
    2. How to delete unwanted styles from both styles lists?
    3. How to modify the default formulas for Bullets & Lists styles and make them stick for future documents?
    Appreciated.

    Click on it and you get the Formatting options for the selected text.
    If I had meant the Menus, I would have added that, but all the above is what you see when you have a document open in Pages 5.5.2.
    The > are clearly progressive steps. Except for the ">" which appears in the pop up menu, so I put it in quotes.
    I always assume that people on the forum will make some effort themselves, but can bring it down a notch if needed.
    Peter

  • Passing the database name as a PL/SQL procedure parameter

    How do I pass the name of the database as a parameter to a procedure?
    If dbs is the variable name to which I pass the database name as shown in the example,
    CREATE OR REPLACE PROCEDURE Extract_gl_acct_Tbl(dbs varchar2)
    and I use dbs in the code as follows,
    SELECT ACCOUNT,
    SETID
    FROM SYSADM.PS_GL_ACCOUNT_TBL@dbs
    It gives me an error saying 'ORA-04054: database link DBS does not exist'.

    You will need to use dynamic SQL to handle this:
    create or replace ...
    is
    type rc is ref cursor;
    v_rc rc;
    begin
    open v_rc for 'select ... from sysadm.ps_gl_account_tbl@' || dbs;
    fetch v_rc into ... -- some variables
    -- if multiple rows, you'll need to do the fetch in a loop and exit when v_rc%notfound.
    close v_rc;
    end;

  • How to modify a column name & How to modify a constraint name

    How to modify a column name?
    How to modify a primary key constraint name if the pk has been referenced by another foreign key?
    Thanks.

    Hi,
    What version of oracle are you using? If it is 9i,
    then you can the command
    alter table <table_name> rename column <column_name> to <new_column>;
    if it is 8i or earlier, you can create a view with the required names.
    hth
    Always post the oracle version and the platform you are using to get better response.

  • How to modify the coding part of KE30 reports ?

    How to modify the coding part of KE30 reports ,
    so that I can be able to restrict report output based on sales office.
    I am unable to find out the program name also.
    Regards
    Anubhav

    >
    Venkat Reddy wrote:
    > Hi,
    >
    > If u want to know the program running for KE30 just go to SE93 and give KE30
    > and click on display you can see the program running for KE30 will be SAPMKCEE.
    > I think this is much simpler :-).
    >
    > Rather than change the standard report try to prepared your own that will be more
    > comfortable since it will be complex task to achieve editing the standard program.
    > Good Luck
    >
    > Regards
    > VEnk@
    >
    > Edited by: Venkat Reddy on Dec 11, 2009 4:52 PM
    Venkat,your answer is much simpler If the OP knows there is a tcode Se93, what if he/she does not know it?? 
    P.S: Just a thought.
    Regards.
    Vishwa.

  • Can any one tell how to modify the PO that is being sent as an email?

    Hi,
           Can anyone let me know that how to modify the PO with some more additonal data while being sent as an email.
    My actual requirement is that PO is already being sent as an email when the PO is created.But now they want some more additional data as an attachement along with PO to be sent as email.ie both PO and another scriptform(which contains some other additonal data other than from PO) have to be sent as an email to the vendor when the PO is created.
    I would like to know the name of the userexit,where I can modify the existing PO or else please let me know how to resolve this issue.
    First of all I would like to know the name of the userexit where this PO is being sent as an email.
    It doesn't matter whatever the solution might be.But we need to send another sapscript form or additional data as an attachement along with PO through email to the vendor.I dont know whether it should be another script or it is also ok to add that data to the existing PO and then only the PO can be sent.
    Thanks,
    Krishna

    Eswar,
                Thanks for your email.Can you please be bit clear.I am new to this area.
    Any flexible solution is ok for me.Is it in the Userexit,that I need to include the code or what are outtypes as you said.
    Please give me clear solution.
    Thanks,
    Krishna

Maybe you are looking for