How to monitor Mapping Look ups ?

Hi @,
I my application I am using maping lookup where Iam passing a value and then getting Y or N based upon the return from look up from R/3 .Fo rthis i am using rfc adaptor .
Now when i am execfuting the mapping the result is not getting proper I need to verify that whether the lookup is happening or not.I need to monitor the same.
Regards

Amit,
Add Trace Statements in your User Defined Function and then you will be able to see these Trace in the Runtime in the Trace Section under the SOAP header in MONI.
use this code in the UDf,
AbstractTrace trace= container.getTrace();
trace.addWarning("What Ever Message and variables etc");
Add these Trace to the Request RFC XML, likewise Print the response RFC XML and check what it returns and then see why the parser used to parse and get the RFC responsefailes, etc.
Regards
Bhavesh

Similar Messages

What is Mapping Look ups?

Can any one explain me what is mapping look ups in graphical mapping?

Hi,
There are three types of look ups u can do
RFC look up
SOAP look up
JDBC look up
What is Lookup and why we need:
Within an XI mapping it is a common requirement to be able to perform data lookups on-the-fly. In particular, there may be a need to look up some data that is maintained in an R/3 application.
In the error handling topic we have seen the different validations which need to be performed on file. This can be done through Lookup.
Some use cases:
Look up material number from table MARA.
Look up cost center budget.
Look up employee information.
Look up unit-of-measure (UOM) information from table t006a.
Lookup for raising an alert.
The purpose of the lookup may be:
To perform application-level validation of the data, before sending it to the backend.
To populate fields of the XML document with some additional data found in the backend application.
This is a form of value transformation.
The "value mappings" offered by XI are not adequate in this case, since the data would have to be manually entered in the Integration Directory.
There are two ways in which we can do lookup:
Call lookup method from GUI mapping.
Call lookup method from XSLT mapping.
Lookup method from GUI mapping can be called using any of the following ways.
RFC lookup using JCO (without communication channel)
/people/sravya.talanki2/blog/2005/12/21/use-this-crazy-piece-for-any-rfc-mapping-lookups
RFC lookup with communication channel.
/people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
Lookup using JDBC adapter.
/people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
/people/sap.user72/blog/2005/12/06/optimizing-lookups-in-xi
CSV file lookup.
/people/sundararamaprasad.subbaraman/blog/2005/12/09/making-csv-file-lookup-possible-in-sap-xi
Lookups with XSLT - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8e7daa90-0201-0010-9499-cd347ffbbf72
/people/sravya.talanki2/blog
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/05a3d62e-0a01-0010-14bc-adc8efd4ee14
DB lookup - /people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
SOAP Lookup - /people/bhavesh.kantilal/blog/2006/11/20/webservice-calls-from-a-user-defined-function
You can refer to these links.
/people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer Absolute stealer.
/people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
For Java APIs and also here you can map that how many types of lookups are possible in XI.
http://help.sap.com/javadocs/NW04/current/pi/com/sap/aii/mapping/lookup/package-summary.html
Hope this will help you.
Regards
Aashish Sinha
PS : reward points if helpful

How to implement mapping for a slowly changing dimension

Hello,
I don't have any experience with OWB and I need some help.
I just don't know how to create the ETL process for a slowly changing dimension.
My scenario is that I have 2 operative systems providing customer information, a staging area and a dwh with a customer dimension with SCD type 2 (created within OWB).
The oltp data is already transferred to the staging area. But how should the mapping for the dwh table look like? Which operators have to be used?
I have to check whether the customer record is new or just updated. How can I check every attribute? A new record shall be loaded, an updated record shall be historized (as I configured it in the SCD type 2). I just don't know how the trigger of the SCD is activated. Do I have to try an update on the trigger attribute and then automaticalle a new record is created? But with which operator can I do this? How should the mapping look like? Or is this impossible and do I have to implement this functionality with SQL code only?
I know how to implement this with SQL code, but my task is to implement this in OWB.
As you see I did not understand the logic of OWB so far and I hope somebody can help me.
Greetings,
Joerg

Joerg,
Check the blog below which provides good detail and also check the OWB documentation
http://www.rittmanmead.com/2006/09/21/working-through-some-scd-2-and-3-examples-using-owb10gr2/
Thanks,
Sam.

How to use database look up table function in xsl mapping

Can anybody tell me how to use database look up table function while mapping xsl between 2 nodes.
I have an XML file coming in and depending on one of XML elements we need to decide which further path to take. But, using this XML element, we need to query database table, get metadata and accordingly take appropriate path. I have written lookup function which returns metadata value.
Now, the issue is how do I pass the XML element valu as input to look up function? When I tried to drag it to the input node of lookup function, it throws an error like "Maximum number of parameters exceeded"
Thanks,

If the lookup table is always going to remain the same (e.g. a character generator or something similar) you can place the values in a 2D array constant on your diagram, with the input value as one column, the equivalent as the other. When you need to perform the lookup you use an index array to return all the values in the "input column", search it using "search 1D array" and use the resulting index number to index the other column's data. If the values may change, then it would probably be best to load an array control with your equivalent values from a file.
P.M.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

How to use Infocube in Look ups

Hi Experts,
i have a requirement that i have Infoset as source and Infocube as target. For the two key figures in the target i neet to get the values from some other Infocube by comparing some characteristics using look ups..
Before i have used Look ups to get the data from DSO..now i have a question that how to get the values from Infocube ..
thank you..

Hi,
also see following function module
RRW3_GET_QUERY_VIEW_DATA
Thanks and regards

Look-Ups

Hi All,
1.Can you tell me what exactly the look-ups are?
2.Please tell me about the RFC and JDBC look-ups.
3.Also please tell me how many data types do I need to create for For JDBC <---> RFC sync ?
4.From my point of view I should create 2 data types ,2 message types for JDBC Request and JDBC Response while I can skip creating data types for Receiving RFC side.Is it?
Thanks in advance.

Hi Swetha,
1.Can you tell me about when are RFC,JDBC,CSV look-ups are used?
Look ups can be useful in any where, especially when we like to map the value that is reseided in some other application system and that value tend to change or get updated very frequently in that system .So as to get the recently updated values we prefer this .if it doesnot happen we cn directly go for hardcoding either by using Fixed values or value mapping.If the value is queried from R/3 we use RFC look ups.If the value is to be retived from Database we go for JDBC.
2.I think look ups are nothing but the User Defined Functions.Is it?Please tell me in detail.
Look ups need not not only Java functions we can do that in BPMs remember Filr to RFC to FIle using BPM scenario there we get values from RFC response too in Bpm .But this is again a performance issue with out using UDF.But its very easy to perform the lookups using UDF.Even SAP has provided good JavaAPI to perform lookups according to requirement.In most of the cases we use lookups for querying single values.But in PI7.1 there has been added advantage in the form of Graphical lookups to avoid java code and maintin reusability.The link was mentioned by experts already.
3.Please give me any scenerio about the implementation of RFC,JDBC,CSV look-ups .
I am giving example which i came across while working with EDI documents in SEEBURGER environment.There was a field value "TE" in some segment, while mapping to target i should get the Defintion forTE wich was maintained in some other data base and map to the target side, for that purpose we had to use JDBC look up and ping the data base to retrive the required value as the result of Lookup. So when i applied look up i got the value "TELEPHONE" for the code TE.The same way for FX the lookup result was FASCIMILE.Not only this for PLANTCODES and some other business related data we might need to use Lookups...Hope you understood my point.
Thanks,
Ram.

How to monitor a specific transaction in Solution Manager ?

Hi all,
I have configured the Service Level Reporting and it works correctly.
But i don't know how to monitor a specific transaction like SM21, DB02, FB01N etc... ?
In the SL Reports configuration steps, we can configure this option : Select Business Processes For SL Report. I did a lot of tests but it does not work.
Have i to configure the Business Process Monitoring ?
Thanks.

Hello,
it depends a little on what you want to do. If you use the pure CCMS monitoring with the table ALTRAMONI you get average response time per instance and you only get new measurements once the status changes from green to yellow or red.
In order to get continuous measurements you should look into Business Process Monitoring and the different documentations under https://service.sap.com/bpm --> Media Libary --> Technical Information. E.g. the PDF Setup Guide for Application Monitoring describes this "newer" dialog performance monitor. Probably you have to click on the calendar sheet in the Media Libary to also see older documents as well. As the Business Process Monitoring integrates with BW (there is also a BI Setup Guide in the Media LIbrary) you can get trendlines there. This BW integration also integrates back with SL Reporting.
Some guidance for SL Reporting is probably given under https://service.sap.com/rkt-solman but I am not 100% sure.
Best Regards
Volker

How to measure mapping execution speed

Hi,
currently i'm trying to measure performance differences between Interface Mappings which contain one single Message Mapping and Interface Mappings which contain 2 or 3 Message Mappings.
I already tried to do this with RWB and Performance-Monitoring. But Performance Monitoring shows the processing time through the whole XI, and not only Mapping execution time. So it is difficult to get a clean measuring there, without influences from queueing and so on.
Test Tab on Integration Builder has a too big step (one second). Mapping execution time is slower.
Do you have any ideas to measure this?
Or do you have experience with performance differences between those two kinds of Interface Mappings?
regards,
ms
P.S. i'm using XI 3.0

Hi, Manuel:
For the two scenarios you want to compare performance, trigger them separately.
You take following steps to take measurement for those two scenarios:
Go to SXMB_MONI, find the message, go to pipeline step after your "Request Message Mapping"
e.g. you can select "Technical Routing" step, expand it, -> SOAP Header -> Performance Header:
You will see the start time stamp for each steps executed up to current step.
Locate your mapping programs, get the begin time stamp and end time stamp, then you will know the how long the mapping program take.
For the scenario that you have several mapping programs, make sure you get begin timestamp for the first mapping program and end timestamp for last mapping program, the difference is the time for you few mapping program take.
Hope this helps.
Liang
Edited by: Liang Ji on Mar 29, 2008 5:42 AM

How to monitor MySQL Server installed in Windows Server using Nagios

You can do this via NSClient as Gary posted. The NSClient is a communications system that allows nagios to send commands to a target system over the nsclient protocol and they are executed on the remote system. You will still have to build some kind of vbscript or plugin to run on the target system to do the actual query to check on mysql.There are other options to. If you enable snmp on your target computer you can use a few nagios plugins to query the snmp agent on the target computer to see if a service is running. To do this via snmp you will need this plugin "check_snmp_process.pl" fromthis site.Your check command will look something like this:check_win_process:= check_snmp_process.pl -H $HOSTADDRESS$ -C "$USER6$" -n "$ARG1$" -w $ARG2$ -c $ARG3$The service definition will be like this:check_win_process!sqlservr!0!0This will check...

I installed Nagios Core in my Ubuntu workstation 10.04 for me to learn something new in my craft. I use this now to monitor our Windows Server 2008 with MySQL server installed as well as our Datalink Switch (DGS-1210-24). I searched on google on how to monitor a MYSQL server installed in Windows server using Nagios Core but i could not seem to find any. Could anybody who's expert in Nagios give me steps on how to do so. Thanks. All i found in google were steps in monitoring mysql installed in linux and nothing in windows server.
This topic first appeared in the Spiceworks Community

How do you map a PFI to a clock to measure frequency?

I am running LabVIEW 8.2 and I am trying to measure the frequency of a voltage on a PFI pin. I have heard that I can map that pin to a counter input to measure the voltage but i cannot figure out how to do it. Are there any VI's already set up to do this? How can I map the PFI to a counter?

Hi Flowserve1,
What hardware are you using to make your measurement? What driver are you working with? You will be able to make measurements with your counter on a digital signal. If you look at the device pinouts for your device in Measurement and Automation Explorer you will see the counter terminals.
Steve B

Fonts for Interstate highways in Maps look like picture symbols.

Fonts for Interstate highways in Maps look like picture symbols.
Mavericks 10.9.4. Using FontAgentPro.
Is there a font that has to be activated? Or even a conflicting font that has to be deactivated like in Chrome?
Thanx.

Validate your fonts using Font Book.
How to use Font Book to validate fonts
1. Open Font Book in your Applications folder.
2. Select All Fonts.
3. Now click in the list of fonts and select all (Edit > Select All).
4. Under File in the Menu bar, select Validate Fonts.
5. Duplicate fonts will be marked with either the yellow badge or a black dot.
6. Select to remove or delete duplicates.*
7. Delete font caches (how to)
8. Restart your computer
* Step 6 – remove or delete duplicates is where the tricky part comes in. You can select to let Font Book disable or remove duplicates, but I’ve found that it removes the one you have not been using rather than selecting the best option. See Font Management in OS X, by Kurt Lang, for more info on fonts.
http://www.jklstudios.com/misc/osxfonts.html
See Kurt Lang's directions here to remove font caches
https://discussions.apple.com/message/26188553#26188553

How to monitor page hit rates?

I see a lot of references in docs and white papers to cache hit rates for the Parallel Page Engine, but I've not found any documentation on how to monitor this system-wide (only how to turn on portlet statistics and get a manual page-by-page look at cache success/failure).
Is there any way to determine the cache hit rate for the PPE?

Stephen,
I'm sorry you seem to be experiencing some problems with the support and documentation of the portal software.
The link above was posted on May 1st 2002, and was posted as an absolute link rather than a dynamic product link. As the document name is revved the link will change, hence why an old link from the forums will no longer work.
The document you seek is here. I assume that by referring to webcache you mean that when you add the XLF logging format options webcache complains about x-ecid (for example). This indicates that you have not applied the core iAS patchset which is required to allow webcache to understand these extended log parameters. I believe that the document refers to this as a requirement to get 'full functionality' - perhaps that is a little esoteric, I'll change it in the next rev.
If you continue to be unsuccessful in deploying this note please let me know what errors you're seeing and I'll see what I can do. I'm working on an end-to-end performance kit at the moment that will supercede this document so I'll take your comments on board when revving this area.
Regards
Jason Pepper
Principal Product Manager
Oracle9iAS Portal

How to monitor DFS shares disk usage/free space?

How to monitor DFS shares disk usage/free space?
Using Netapp filer shares to which DFS points. Looking for powershell script to send report.

Hi,
How about using Disk Quota function in FSRM (File Server Resource Manager)?
Please see:
Quota Management
http://technet.microsoft.com/en-us/library/cc755917(v=ws.10).aspx
In your case you can setup a soft quota with a specific size so that when it runs out of space you set, you will get an email or warning according to your setup.
If you have any feedback on our support, please send to [email protected]

Monitor Mapping with Message-Splitting

Hello,
Does anyone know how to monitor a Message-Splitting-Mapping with the Graphical Mapping Tool.
in my case i read data via the jdbc-connector and i have to split the data.
Can I monitor which new Messages are created, when i only know the senders MessageId?
thx
Christian

>>>>>>when i only know the senders MessageId?
Raster, what is the senders MessagesId u referred here?
raj.

How to monitor sigtran links on a 7604 using mibs

I've been looking the manuals but I was not able to find how to monitor sigtran links using mibs on a 7604.
Some Cisco manuals points to URLs that doesn't exist. I would like also to know how to create traps about theses mibs.

Simply do your integration as instructed by the guides, make sure all user/device/line associations are in place, add someone who doesn't have Jabber to your contact list, he will always show offline and will only show as on a call when he pickups the handset.
EDIT: this will also happen for people who DO use Jabber, but do not log in.

How to monitor Mapping Look ups ?

Similar Messages

Maybe you are looking for