How to monitor SQL Apply for 10.2.0.3 logical standby database

We have a logical standby database setup for reporting purposes. Users want to monitor whether sql apply is working or failed closely as it has reporting repercations.
In case of 9i databases , there was "Data Not Applied (logs)" metric which we used for alerting and paging, in case a backlog of more than 5 log files developed.
With 10.2.0.3 onwards, the metric no more exists.
I would like to learn from other, how to monitor the setup, so that if the backlog in logs shipping or applying develops, we get page.
Regards.

regather the statistics on the table with method_opt=>for all columns or for all indexed columns or whatever size 1
The 'size 1' directive will remove the histogram statistics.
Sorry, didn't read ur post in a hurry. Below article (http://www.freelists.org/post/oracle-l/Any-quick-way-to-remove-histograms,13) removes histogram without re-analyzing the table. Hope that helps!!!
On 3/16/07, Wolfgang Breitling <breitliw@xxxxxxxxxxxxx> wrote:
I also did a quick check and just using
exec
dbms_stats.set_column_stats(user,'table_name',colname=>'column_name',d
istcnt=>
<num_distinct>);
will remove the histogram without removing the low_value andhigh_value.
At 01:40 PM 3/16/2007, Alberto Dell'Era wrote:
On 3/16/07, Allen, Brandon <Brandon.Allen@xxxxxxxxxxx> wrote:
Is there any faster way to remove histograms other than
re-analyzing
>
the table? I want to keep the existing table, index & columnstats,
>
but with only 1 bucket (i.e. no histograms).You might try the attached script, that reads the stats using
dbms_stats.get_column_stats and re-sets them, minus the histogram,
using dbms_stats.set_column_stats.
I haven't fully tested it - it's only 10 minutes old, even if Ihave
slightly modified for you another script I've used for quite some
time - and the spool on 10.2.0.3 seems to confirmthat the histogram
is, indeed, removed, while all the other statistics are preserved.I
have also reset density to 1/num_distinct, that is the value youget
if no histogram is collected.regards,
naren
Edited by: fuzzydba on Oct 25, 2010 10:52 AM

Similar Messages

How to create sql query for item master with operator LIKE with variables?

hi all,
How to create sql query for item master with
operator LIKE(Contains,Start With,End With) with variables using query generator in SAP B1 ?
Jeyakanthan

Hi Jeyakanthan,
here is an example (put the like statement into the where field)
SELECT T0.CardCode, T0.CardName FROM OITM T0 WHERE T0.CardName Like '%%test%%'
The %% sign is a wildcard. If you need start with write 'test%%' and otherwise ends with '%%test'. For contains you need '%%test%%'. You also could combinate this statements like 'test%%abc%%'. This means starts with test and contains abc.
Regards Steffen

How to write sql query for counting pairs from below table??

Below is my SQL table structure.
user_id | Name | join_side | left_leg | right_leg | Parent_id
100001 Tinku Left 100002 100003 0
100002 Harish Left 100004 100005 100001
100003 Gorav Right 100006 100007 100001
100004 Prince Left 100008 NULL 100002
100005 Ajay Right NULL NULL 100002
100006 Simran Left NULL NULL 100003
100007 Raman Right NULL NULL 100003
100008 Vijay Left NULL NULL 100004
It is a binary table structure.. Every user has to add two per id under him, one is left_leg and second is right_leg... Parent_id is under which user current user is added.. Hope you will be understand..
I have to write sql query for counting pairs under id "100001". i know there will be important role of parent_id for counting pairs. * what is pair( suppose if any user contains both left_leg and right_leg id, then it is called pair.)
I know there are three pairs under id "100001" :-
1. 100002 and 100003
2. 100004 and 100005
3. 100006 and 100007
100008 will not be counted as pair because it does not have right leg..
But i dont know how to write sql query for this... Any help will be appreciated... This is my college project... And tommorow is the last date of submission.... Hope anyone will help me...
Suppose i have to count pair for id '100002'. Then there is only one pair under id '100002'. i.e 100004 and 100005

Sounds like this to me
DECLARE @ID int
SET @ID = 100001--your passed value
SELECT left_leg,right_leg
FROM table
WHERE (user_id = @ID
OR parent_id = @ID)
AND left_leg IS NOT NULL
AND right_leg IS NOT NULL
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Slow SQL Apply on Logical Standby Database in Oracle10g

Hi,
We are using Oracle 10g Logical Standby database in our production farm but whenever there is bulk data load (5-6 GB data) on the primary database, the logical standby seems to be hung. It takes days to apply the 5-6 GB data on the logical standby.
Can anybody give me some pointers how can I make my SQL Apply fast on the logical standby for bulk data.
Thanks
Amit

Hi there,
I've a similar problem. I did an insert of 700k on a table. It takes me over 1 1/2 hours to see the data. Notice, I increased the "max_sga" to 300m and "max_servers" to 25" and didn't help the performance at all.
My version is 10.2.0.3 with the patch 6081550.
APPLIED_SCN APPLIED_TIME RESTART_SCN RESTART_TIME LATEST_SCN LATEST_TIME MINING_SCN MINING_TIME
1015618 29-NOV-2007 18:28:51 1009600 29-NOV-2007 18:28:51 1017519 29-NOV-2007 19:54:07 1015656 29-NOV-2007 18:32:14

Sql Apply issue in logical standby database--(10.2.0.5.0) x86 platform

Hi Friends,
I am getting the following exception in logical standby database at the time of Sql Apply.
After run the command alter database start logical standby apply sql apply services start but after few second automatically stop and getting following exception.
alter database start logical standby apply
Tue May 17 06:42:00 2011
No optional part
Attempt to start background Logical Standby process
LOGSTDBY Parameter: MAX_SERVERS = 20
LOGSTDBY Parameter: MAX_SGA = 100
LOGSTDBY Parameter: APPLY_SERVERS = 10
LSP0 started with pid=30, OS id=4988
Tue May 17 06:42:00 2011
Completed: alter database start logical standby apply
Tue May 17 06:42:00 2011
LOGSTDBY status: ORA-16111: log mining and apply setting up
Tue May 17 06:42:00 2011
LOGMINER: Parameters summary for session# = 1
LOGMINER: Number of processes = 4, Transaction Chunk Size = 201
LOGMINER: Memory Size = 100M, Checkpoint interval = 500M
Tue May 17 06:42:00 2011
LOGMINER: krvxpsr summary for session# = 1
LOGMINER: StartScn: 0 (0x0000.00000000)
LOGMINER: EndScn: 0 (0x0000.00000000)
LOGMINER: HighConsumedScn: 2660033 (0x0000.002896c1)
LOGMINER: session_flag 0x1
LOGMINER: session# = 1, preparer process P002 started with pid=35 OS id=4244
LOGSTDBY Apply process P014 started with pid=47 OS id=5456
LOGSTDBY Apply process P010 started with pid=43 OS id=6484
LOGMINER: session# = 1, reader process P000 started with pid=33 OS id=4732
Tue May 17 06:42:01 2011
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 1417, X:\TANVI\ARCHIVE2\ARC01417_0748170313.001
Tue May 17 06:42:01 2011
LOGMINER: Turning ON Log Auto Delete
Tue May 17 06:42:01 2011
LOGMINER: End mining logfile: X:\TANVI\ARCHIVE2\ARC01417_0748170313.001
Tue May 17 06:42:01 2011
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 1418, X:\TANVI\ARCHIVE2\ARC01418_0748170313.001
LOGSTDBY Apply process P008 started with pid=41 OS id=4740
LOGSTDBY Apply process P013 started with pid=46 OS id=7864
LOGSTDBY Apply process P006 started with pid=39 OS id=5500
LOGMINER: session# = 1, builder process P001 started with pid=34 OS id=4796
Tue May 17 06:42:02 2011
LOGMINER: skipped redo. Thread 1, RBA 0x00058a.00000950.0010, nCV 6
LOGMINER: op 4.1 (Control File)
Tue May 17 06:42:02 2011
LOGMINER: End mining logfile: X:\TANVI\ARCHIVE2\ARC01418_0748170313.001
Tue May 17 06:42:03 2011
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 1419, X:\TANVI\ARCHIVE2\ARC01419_0748170313.001
Tue May 17 06:42:03 2011
LOGMINER: End mining logfile: X:\TANVI\ARCHIVE2\ARC01419_0748170313.001
Tue May 17 06:42:03 2011
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 1420, X:\TANVI\ARCHIVE2\ARC01420_0748170313.001
Tue May 17 06:42:03 2011
LOGMINER: End mining logfile: X:\TANVI\ARCHIVE2\ARC01420_0748170313.001
Tue May 17 06:42:03 2011
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 1421, X:\TANVI\ARCHIVE2\ARC01421_0748170313.001
LOGSTDBY Analyzer process P004 started with pid=37 OS id=5096
Tue May 17 06:42:03 2011
LOGMINER: End mining logfile: X:\TANVI\ARCHIVE2\ARC01421_0748170313.001
LOGSTDBY Apply process P007 started with pid=40 OS id=2760
Tue May 17 06:42:03 2011
Errors in file x:\oracle\product\10.2.0\admin\tanvi\bdump\tanvi_p001_4796.trc:
ORA-00600: internal error code, arguments: [krvxbpx20], [1], [1418], [2380], [16], [], [], []
LOGSTDBY Apply process P012 started with pid=45 OS id=7152
Tue May 17 06:42:03 2011
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 1422, X:\TANVI\ARCHIVE2\ARC01422_0748170313.001
Tue May 17 06:42:03 2011
LOGMINER: End mining logfile: X:\TANVI\ARCHIVE2\ARC01422_0748170313.001
Tue May 17 06:42:03 2011
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 1423, X:\TANVI\ARCHIVE2\ARC01423_0748170313.001
Tue May 17 06:42:03 2011
LOGMINER: End mining logfile: X:\TANVI\ARCHIVE2\ARC01423_0748170313.001
Tue May 17 06:42:03 2011
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 1424, X:\TANVI\ARCHIVE2\ARC01424_0748170313.001
LOGMINER: session# = 1, preparer process P003 started with pid=36 OS id=5468
Tue May 17 06:42:03 2011
LOGMINER: End mining logfile: X:\TANVI\ARCHIVE2\ARC01424_0748170313.001
Tue May 17 06:42:04 2011
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 1425, X:\TANVI\ARCHIVE2\ARC01425_0748170313.001
LOGSTDBY Apply process P011 started with pid=44 OS id=6816
LOGSTDBY Apply process P005 started with pid=38 OS id=5792
LOGSTDBY Apply process P009 started with pid=42 OS id=752
Tue May 17 06:42:05 2011
krvxerpt: Errors detected in process 34, role builder.
Tue May 17 06:42:05 2011
krvxmrs: Leaving by exception: 600
Tue May 17 06:42:05 2011
Errors in file x:\oracle\product\10.2.0\admin\tanvi\bdump\tanvi_p001_4796.trc:
ORA-00600: internal error code, arguments: [krvxbpx20], [1], [1418], [2380], [16], [], [], []
LOGSTDBY status: ORA-00600: internal error code, arguments: [krvxbpx20], [1], [1418], [2380], [16], [], [], []
Tue May 17 06:42:06 2011
Errors in file x:\oracle\product\10.2.0\admin\tanvi\bdump\tanvi_lsp0_4988.trc:
ORA-12801: error signaled in parallel query server P001
ORA-00600: internal error code, arguments: [krvxbpx20], [1], [1418], [2380], [16], [], [], []
Tue May 17 06:42:06 2011
LogMiner process death detected
Tue May 17 06:42:06 2011
logminer process death detected, exiting logical standby
LOGSTDBY Analyzer process P004 pid=37 OS id=5096 stopped
LOGSTDBY Apply process P010 pid=43 OS id=6484 stopped
LOGSTDBY Apply process P008 pid=41 OS id=4740 stopped
LOGSTDBY Apply process P012 pid=45 OS id=7152 stopped
LOGSTDBY Apply process P014 pid=47 OS id=5456 stopped
LOGSTDBY Apply process P005 pid=38 OS id=5792 stopped
LOGSTDBY Apply process P006 pid=39 OS id=5500 stopped
LOGSTDBY Apply process P007 pid=40 OS id=2760 stopped
LOGSTDBY Apply process P011 pid=44 OS id=6816 stopped
Tue May 17 06:42:10 2011

Errors in file x:\oracle\product\10.2.0\admin\tanvi\bdump\tanvi_p001_4796.trc:
ORA-00600: internal error code, arguments: [krvxbpx20], [1], [1418], [2380], [16], [], [], []submit an SR to ORACLE SUPPORT.
refer these too
*ORA-600/ORA-7445 Error Look-up Tool [ID 153788.1]*
*Bug 6022014: ORA-600 [KRVXBPX20] ON LOGICAL STANDBY*

How to apply the changes in logical standby database

Hi,
I am new to Dataguard. I am now using 10.2.0.3 and followed the steps from Oracle Data Guard Concepts and Administration Guide to setup a logical standby database.
When I insert a record to a table from the primary database side, when i query the same table from the logical standby database, it doesn't show the new records.
Did I miss something? What I want to do is when I insert a record in the primary db, then the corresponding record will be inserted in the standby db.
Or I totally misunderstand what Oracle data guard is? Any help are appreciated.
Denis

Hi
Can anyone help to answer me is my logical standby db have a archive gap?
SQL> SELECT APPLIED_SCN, APPLIED_TIME, READ_SCN, READ_TIME, NEWEST_SCN, NEWEST_T
IME FROM DBA_LOGSTDBY_PROGRESS;
APPLIED_SCN APPLIED_TIME READ_SCN READ_TIME NEWEST_SCN
NEWEST_TIME
851821 29-JUL -08 17:58:29 851822 29-JUL -08 17:58:29 1551238
08-AUG -08 08:43:29
SQL> select pid, type, status, high_scn from v$logstdby;
no rows selected
SQL> alter database start logical standby apply;
Database altered.
SQL> select pid, type, status, high_scn from v$logstdby;
PID
TYPE
STATUS HIGH_SCN
2472
COORDINATOR
ORA-16116: no work available
3380
READER
ORA-16127: stalled waiting for additiona 852063
l transactions to be applied
2480
BUILDER
ORA-16116: no work available
2492
ANALYZER
ORA-16111: log mining and apply setting
up
2496
APPLIER
ORA-16116: no work available
2500
APPLIER
ORA-16116: no work available
3700
APPLIER
ORA-16116: no work available
940
APPLIER
ORA-16116: no work available
2504
APPLIER
ORA-16116: no work available
9 rows selected.
Thanks a lot.
Message was edited by:
Denis Chan

How to convert logical standby database to Physical Standby Database

Hi,
Does anyone know how to convert logical standby database(10.2.0.3) to Physical Standby Database(10.2.0.3)? Is this possible? If so,please give me steps for it.
Thanks.
Regards,
RJ.

I don't believe this to be possible. One of the steps invloved in the creation of a logical standby is the following:
ALTER DATABASE OPEN RESETLOGS;
This makes the logical standby a different incarnation of the db from the primary.
A physical standby is a binary copy of a primary db, a logical standby is a completely seperate db that just happens to get sql statements applied to it that are generated from a primary db, but is open read/write.
One avenue, though would be if you had flashback database enabled and you flashed back all the way to when the db was a physical standby and then rolled forward with the archived redo logs.
It's somewhat unlikely you are in that situation, but that is a possibility.
Indeed the 11g snapshot standby does this sort of thing:
http://download.oracle.com/docs/cd/B28359_01/server.111/b28294/manage_ps.htm#sthref740
jason.
http://jarneil.wordpress.com

How to delete the foreign archivelogs in a Logical Standby database

How do I remove the foreign archive logs that are being sent to my logical standby database. I have files in the FRA of ASM going back weeks ago. I thought RMAN would delete them.
I am doing hot backups of the databases to FRA for both databases. Using ASM, FRA, in a Data Guard environment.
I am not backing up anything to tape yet.
The ASM FRA foreign_archivelog directory on the logical standby FRA keeps growing and nothing is get deleted when
I run the following command every day.
delete expired backup;
delete noprompt force obsolete;
Primary database RMAN settings (Not all of them)
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 9 DAYS;
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE DB_UNIQUE_NAME 'WMRTPRD' CONNECT IDENTIFIER 'WMRTPRD_CWY';
CONFIGURE DB_UNIQUE_NAME 'WMRTPRD2' CONNECT IDENTIFIER 'WMRTPRD2_CWY';
CONFIGURE DB_UNIQUE_NAME 'WMRTPRD3' CONNECT IDENTIFIER 'WMRTPRD3_DG';
CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
Logical standby database RMAN setting (not all of them)
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 9 DAYS;
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
How do I cleanup/delete the old ASM foreign_archivelog files?

OK, the default is TRUE which is what it is now
from DBA_LOGSTDBY_PARAMETERS
LOG_AUTO_DELETE TRUE SYSTEM YES
I am not talking about deleting the Archive logs files for the Logical database that it is creating, but the Standby archive log files being sent to the Logical Database after they have been applied.
They are in the alert log as follows under RFS LogMiner: Registered logfile
RFS[1]: Selected log 4 for thread 1 sequence 159 dbid -86802306 branch 763744382
Thu Jan 12 15:44:57 2012
*RFS LogMiner: Registered logfile [+FRA/wmrtprd2/foreign_archivelog/wmrtprd/2012_01_12/thread_1_seq_158.322.772386297] to LogM*
iner session id [1]
Thu Jan 12 15:44:58 2012
LOGMINER: Alternate logfile found. Transition to mining archived logfile for session 1 thread 1 sequence 158, +FRA/wmrtprd2/
foreign_archivelog/wmrtprd/2012_01_12/thread_1_seq_158.322.772386297
LOGMINER: End mining logfile for session 1 thread 1 sequence 158, +FRA/wmrtprd2/foreign_archivelog/wmrtprd/2012_01_12/threa
d_1_seq_158.322.772386297
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 159, +DG1/wmrtprd2/onlinelog/group_4.284.771760923

Real-time apply cascaded logical standby database

Hi
I have a primary database orcl
Pysical standby database orcl_std
Cascaded logical standby database orcl_tri which receives archivelogs from orcl_std
Real time apply is enabled both in orcl_std (physical standby) and orcl_tri (logical standby)
When I create a table in primary orcl, I am unable to see it on orcl_tri (Although real time apply is enabled)
However, when I switch log in primary, I can see the new table on orcl_tri.
My question is, why realtime apply is not working in my scenerio ?
orcl_std : ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION USING CURRENT LOGFILE;
orcl_tri: ALTER DATABASE START LOGICAL STANDBY APPLY IMMEDIATE;
Oracle 11.2.0.3.0

Hi mseberg,
Thanks for your reply.
There is no load or network issue as I`ve just created these databases for the experiement.
I have the same output from standby and primary databases.
SQL> select bytes/1024/1024 from v$standby_log;
BYTES/1024/1024
             10
             10
             10I can see below output in standby alertlog
Fri Nov 16 08:39:51 2012
ALTER DATABASE START LOGICAL STANDBY APPLY IMMEDIATE
ALTER DATABASE START LOGICAL STANDBY APPLY (orcl)
with optional part
IMMEDIATE
Attempt to start background Logical Standby process
Fri Nov 16 08:39:51 2012
LSP0 started with pid=37, OS id=16141
Completed: ALTER DATABASE START LOGICAL STANDBY APPLY IMMEDIATE
LOGMINER: Parameters summary for session# = 1
LOGMINER: Number of processes = 3, Transaction Chunk Size = 201
LOGMINER: Memory Size = 30M, Checkpoint interval = 150M
LOGMINER: SpillScn 1953318, ResetLogScn 995548
LOGMINER: summary for session# = 1
LOGMINER: StartScn: 0 (0x0000.00000000)
LOGMINER: EndScn: 0 (0x0000.00000000)
LOGMINER: HighConsumedScn: 1955287 (0x0000.001dd5d7)
LOGMINER: session_flag: 0x1
LOGMINER: Read buffers: 16
Fri Nov 16 08:39:55 2012
LOGMINER: session#=1 (Logical_Standby$), reader MS00 pid=30 OS id=16145 sid=49 started
Fri Nov 16 08:39:55 2012
LOGMINER: session#=1 (Logical_Standby$), builder MS01 pid=39 OS id=16149 sid=44 started
Fri Nov 16 08:39:55 2012
LOGMINER: session#=1 (Logical_Standby$), preparer MS02 pid=40 OS id=16153 sid=50 started
LOGMINER: Turning ON Log Auto Delete
LOGMINER: Begin mining logfile during commit scan for session 1 thread 1 sequence 202, +DATA/orcl_std/archivelog/2012_11_15/thread_1_seq_202.349.799450179
LOGMINER: End mining logfiles during commit scan for session 1
LOGMINER: Turning ON Log Auto Delete
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 202, +DATA/orcl_std/archivelog/2012_11_15/thread_1_seq_202.349.799450179
LOGMINER: End   mining logfile for session 1 thread 1 sequence 202, +DATA/orcl_std/archivelog/2012_11_15/thread_1_seq_202.349.799450179
Fri Nov 16 08:40:04 2012
LOGSTDBY Analyzer process AS00 started with server id=0 pid=41 OS id=16162
Fri Nov 16 08:40:05 2012
LOGSTDBY Apply process AS03 started with server id=3 pid=45 OS id=16175
Fri Nov 16 08:40:05 2012
LOGSTDBY Apply process AS04 started with server id=4 pid=46 OS id=16179
Fri Nov 16 08:40:05 2012
LOGSTDBY Apply process AS01 started with server id=1 pid=42 OS id=16167
Fri Nov 16 08:40:05 2012
LOGSTDBY Apply process AS05 started with server id=5 pid=47 OS id=16183
Fri Nov 16 08:40:05 2012
LOGSTDBY Apply process AS02 started with server id=2 pid=44 OS id=16171Do you think real-time apply wasnt setup properly ?

Apply Patches on Oracle Database with Logical Standby Database

Here I am:
I got a primary database with a logical standby database running Oracle 11g. I got two client applications, one is the production site pointing to the primary one, another one is just a backup site pointing to the logical one.Things will only be written into the primary database every mid night and client applications can only query the database but not add, update nor delete.And now, I want to apply the latest patch on both of my databases. I am also the DNS administrator, I can make the name server pointing to the backup site instead of the production one.I want to firstly apply the patch on the logical one, and then the physical one.
I found some reference which explains how to apply patches by adopting "Rolling Upgrade Method". however, I want to avoid doing any "switch over" mentioned in the reference because I can make use of name server. Can I just apply patches as the following way?
1)Stop SQL apply
2)Apply patches on logical standby database
3)let the name server point to the backup site
4)Apply patches on the primary database
5)Start SQL apply
6)Let the name server point back to the production site
Thanks in advance.

Pl follow the steps in MOS Doc 437276.1 ( Upgrading Oracle Database with a Logical Standby Database In Place )
HTH
Srini

How to remove logical standby database configuration cleanly

Hello,
We are on RHL with 11.2.0.3 DB version. Due to various unknown reasons we would like to recreate logical standby database and for that purpose I would like to cleanly remove/uninstall/drop LOGICAL STANDBY DATABASE from the DATA GUARD configuration we have.
The DG setup already has 1 PHYSICAL STANDBY DATABASE which is working fine. PRIM,PHYSICAL, and LOGICAL all are on different HOSTS. Could you please guide or suggest us exact MOS Doc id regarding this? I have found one MOS Doc id which is close enough but its steps include removing dg configuration completely which I don't want. Only Logical Standby database needs to be remove cleanly so that it can be installed again properly.
We are using GRID CONTROL and DATA GUARD BROKER.
Bundle of thanks in advance.
Best Regards

Hello;
I would review this Oracle note:
How to remove a Data Guard Configuration from Primary Database (Doc ID 733794.1)
Best Regards
mseberg

Redo data not applied on logical standby database 10g

after a network problem within the primary and the logical standby database. The redo data is not applied on the logical standby even if all the archived log are sent to it.
The below is the output from v$archive_gap and DBA_LOGSTDBY_LOG
SQL> select * from v$archive_gap;
no rows selected
SQL> SELECT SEQUENCE#, FIRST_TIME, APPLIED
FROM DBA_LOGSTDBY_LOG
ORDER BY SEQUENCE#; 2 3
SEQUENCE# FIRST_TIME APPLIED
3937 24-FEB-10 01:48:23 CURRENT
3938 24-FEB-10 10:31:22 NO
3939 24-FEB-10 10:31:29 NO
3940 24-FEB-10 10:31:31 NO
3941 24-FEB-10 10:33:44 NO
3942 24-FEB-10 11:54:17 NO
3943 24-FEB-10 12:05:30 NO
Any help?
Thanks

ORA-00600: internal error code, arguments: [krvxgirp], [], [], [], [], [], [], []
LOGSTDBY Analyzer process P003 pid=48 OS id=8659 stopped
Wed Feb 24 16:49:04 2010
Errors in file /oracle/product/10.2.0/admin/umarket/bdump/oradb_lsp0_8651.trc:
ORA-12801: error signaled in parallel query server P003
ORA-00600: internal error code, arguments: [krvxgirp], [], [], [], [], [], [], []
and below an Warning: Apply error received: ORA-26714: User error encountered while applying. Clearing. from oradb_lsp0_8651.trc
Thanks

How to run automated maintenance task on a logical standby database ?

Hi
I realize that i do not see any job runs for automated maintenance tasks on my logical standby database.
Which are the conditions that must be fulfilled for automated maintenance tasks to run?
Thanks
Christoph

Hi,
In an Oracle Data Guard environment, the Scheduler includes additional support for two database roles: primary and logical standby. You can configure a job to run only when the database is in the primary role or only when the database is in the logical standby role. To do so, you set the database_role attribute. This example explains how to enable a job to run in both database roles. The method used is to create two copies of the job and assign a different database_role attribute to each.
By default, a job runs when the database is in the role that it was in when the job was created. You can run the same job in both roles using the following steps:
Copy the job
Enable the new job
Change the database_role attribute of the new job to the required role
The example starts by creating a job called primary_job on the primary database. It then makes a copy of this job and sets its database_role attribute to 'LOGICAL STANDBY'. If the primary database then becomes a logical standby, the job continues to run according to its schedule.
More Information please cheek below link:
Examples of Using the Scheduler
Thank you

How to write sql query for below mentioned eaxmple.

Hi,
I have requirement.
There are number of rows and I need the result through query as follows.Please help me to proved sql query for below mentioned requirement.
example: table TEST.
COLA COLB COLC COLD COLE COLF MANAGER 5 NULL NULL 3 NULL
SR.MANAGER 6 3 NULL NULL NULL
VP 5 5 4 5 5
I have to write the sql query if COLA IS MANAGER THEN CONSIDER MANGER RECORD,AND IF ANY COLUMN FILED IS NULL FOR MANGER THEN CONSIDER COLA IS SR.MANGER, AND IF ANY COLUMN FILED IS NULL FOR SR,MANGER THEN CONSIDER VP records.
I need output as below.
COLB COLC COLD COLE COLF
5(manager) 3(sr.manger) 4(vp) 3(manger) 3(vp)
Please provide the for above mentioned output.
Thanks

Duplicate thread. please view the answer posted in your first thread.
how to write sql query.
And, please don't post any duplicate thread.
Regards.
Satyaki De.

How to encode sql string for SQL Server when using JDBC?

in code, dynamically generate sql stirng like:
String sqlstring = "select column from table where column=' " + var + " ' ";
Question is: if var include char ' , it will cause error becuase ' is reserved by SQL Server for string reference.
So how to encode string for dynamic sql string? for example, following sql(when var =" I'm tester"):
select column from table where column like ' I'm tester '
Edited by: KentZhou on Jun 17, 2009 3:10 PM

Use PreparedStatement. Use it all the way. It not only saves you from SQL injections, but also eases setting non-standard Java objects like Date and InputStream in a SQL statement.
Prepare here: [http://java.sun.com/docs/books/tutorial/jdbc/basics/prepared.html].

How to monitor SQL Apply for 10.2.0.3 logical standby database

Similar Messages

Maybe you are looking for