How to monitor the DNS & DHCP record like errors...

Hi
I am controling the large DNS & DHCP environment, Can any body have any scripts or way ot control the daily summury of queries and error...
Thanks
Mohammed Tanvir

Try the following:
Reason for issue:
    Possibly the Microsoft.ipam ps session configuration is missing from the ipam server.
Resolution:
     Log into the ipam server
Launch a powershell window with administrator privileges
Execute the following commands:
New-PSSessionConfigurationFile -Path ./ipam.pssc
Register-PSSessionConfiguration -Name Microsoft.ipam -Path .\ipam.pssc
Set-PSSessionConfiguration -name Microsoft.ipam –ShowSecurityDescriptorUI
Add the following groups from the local machine scope:
        IPAM Administrators
        IPAM ASM Administrators
        Make sure they have full control privileges.
Get-PSSessionConfiguration *ipam
        Now you should be able to see the Microsoft.ipam ps session configuration
If the following command succeeds then the error should no longer occur
$testSession = New-PSSession -computerName <ipamFQDN> -configurationName Microsoft.ipam.

Similar Messages

Error while trying to use the DNS/DHCP record sync with IPAM script

Could somebody help me to resolve the below error.
I get this error message , when i try to do a Invode-ipamdhcplease
===========================================
Invoke-IpamDhcpLease : [] Connecting to remote server failed with the following error message :
The WS-Management service cannot process the request. Cannot find the Microsoft.ipam session configuration in the
WSMan: drive on the computer. For more information, see the about_Remote_Troubleshooting Help topic.
At line:1 char:1
+
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [Invoke-IpamDhcpLease], PS
RemotingTransportException
+ FullyQualifiedErrorId : InvalidResourceUri,PSSessionOpenFailed

Try the following:
Reason for issue:
    Possibly the Microsoft.ipam ps session configuration is missing from the ipam server.
Resolution:
     Log into the ipam server
Launch a powershell window with administrator privileges
Execute the following commands:
New-PSSessionConfigurationFile -Path ./ipam.pssc
Register-PSSessionConfiguration -Name Microsoft.ipam -Path .\ipam.pssc
Set-PSSessionConfiguration -name Microsoft.ipam –ShowSecurityDescriptorUI
Add the following groups from the local machine scope:
        IPAM Administrators
        IPAM ASM Administrators
        Make sure they have full control privileges.
Get-PSSessionConfiguration *ipam
        Now you should be able to see the Microsoft.ipam ps session configuration
If the following command succeeds then the error should no longer occur
$testSession = New-PSSession -computerName <ipamFQDN> -configurationName Microsoft.ipam.

Viewing Dynamic Leases Under The DNS/DHCP Management Console

My dhcp-server is on oes2 sp3 / sles 10 sp3 and i am trying to set it up for viewing dynamic leases in the DNS/DHCP Management Console.
I am following TID 7006450 and right away i get stuck.
From the TID
1. Launch the DNS/DHCP management console and login to the server
2. Click on the 'DHCP (OES Linux) tab toward the top of the console
3. Find the DHCP Server object at the bottom of the console and select it
4. Toward the top-right hand side of the console select the GENERAL tab and find the section called DHCP SERVER
---- There is no section called DHCP SERVER only Services
5. Click the ADD button and enter the IP address of the DHCP server
NOTE: If doing this step on OES 2 SP 2 the buttons may be greyed out. This is due to the schema not being extended. This option is officially supported on OES 2 SP 3
---- There is no ADD button
6. Click on the SAVE button toward the top, left-hand side of the console (looks like a floppy disk)
---- There is no SAVE button
I have downloaded the latest DNS/DHCP Management Console Version OES2 SP2 october 2009
Is ther a newer version to download

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Any error on the failed start that could help troubleshoot it? A coworker
confirmed the TID worked for him so that's a little comforting, though of
course no idea how your two systems differ. A Service Request (SR) with
Novell is always an option to work on this but it'd be useful to know what
your system showed when it wouldn't start dhcpd.
Good luck.
On 01/31/2011 01:06 PM, RPummel wrote:
>
> That is great advice about making sure to get the software from your
> OES2SP3 box.
>
> Being able to view dynamic leases has been a MAJOR feature I have been
> looking for. We have a bunch of NetWare servers still and are just
> starting to install OES2 Linux boxes, and I have had no visibility via
> the console into the leases hosted by our new Linux boxes.
>
> So, I just installed the console and followed the instructions in TID
> 7006450. However, something must be wrong. Not only does it still refuse
> to show me the dynamically assigned addresses, but if I stop the dhcpd
> service on the server and attempt to start it again, it FAILS! After a
> short panic, I deleted the TSIG Key object which the TID directed me to
> create. This allowed me to successfully start the dhcpd service. (Whew!)
> But, of course, I still can't see the dynamic addresses. I went through
> the directions again and got the same results.
>
> In case you are wondering, I made sure to set the secret for the TSIG
> Key to something divisible by 4, as instructed. I am at a loss. Ideas?
>
> Rick P
>
>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.15 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iQIcBAEBAgAGBQJNRxqsAAoJEF+XTK08PnB5m4gP/2XmWBPd2fCbuahlRMik5fbN
37pYvKFrLsHLlUQMnDJc6Oh6AHxJ2yKmDz3Tr/n7MjKYWKX/oc4JcJK2zZ45wqUS
cuJi+ffwbXOOfPYj0zL4k9oTxm6YDYUZFtnsf8+idqm3BUd3k+ t3QzFjcmlGHBJY
l28V0kr0NvwQlyu8csPix+j5lwVEed33WE3AYP5myKPBxmPyAN Q4qHhyfHFNIKyH
9EAFG+ySpvAx1Q8+6m8XuQC5GUS7StO+hOytWh1SAIvqyx1Lfg loq5FdJxzQxidK
q8AA2TB3866gykMSXxIg07l9wZIDrVPSYeJrZfmBjLuac+ZRsa pIGl+K34HKxyqx
EAQ+frV95aOpfcPMFV5C7C+WttkiDHPZWGtKBPxdcx17W0S69N uhxDoswwiNZ/5g
hWqPatuW7HK5Adp6nUdsSwJKYWTr/a/ZCTFL/9zRBImafGygiD6Yt3oyD/BotiQM
Wy5WW4uayW7Wbfn9R5BmMi+sUDGfNS2k79BcM0uMTmoA3UZX3j UP04P7/dp6kANh
zKnHBGg6WSORi7/xYDvB9VX/Xm2nrBoyl0mA0hdnm+PmMtvm01BQ1tiAWfOQF8iw
7KRABNvH5lxvhVITsE7d9yuyAuMuFc8N+bZW5W09C+bqWGMn8M 5xudLNFZ4N6nb+
kVciE7BUkpeNvjOFNjBx
=lA0E
-----END PGP SIGNATURE-----

How to find the number of records per months in cube

Hi,
how to find the number of records per months for my all cubes?
Can i use the ListCube transaction to find totl number f records per cube monthwise ?
Jimmy

Hi,
Here is a program to generate no of records and list of ODS and Cubes in Active version.Schedule this program in background and create a cube to load this information and schedule to the data from the file generated by the program. Schedule this all per you requirement.
1.Copy the code into your Z<programname> from Se38.
2.change the FILENAME in CALL FUNCTION 'GUI_DOWNLOAD' in the program to the location from where you can pick the information to load data to cube(eg Application server).
3.Save program.
4.Schedule the program in background as required
5.Create cube with infoobjects to hold no of records and Infoprovider name
6.Load this cube based on event after the program job is done.
Hence you can report on this cube to see no of records in CUBE or ODS in your box.
Please find the code below.
Cheers,
Kavitha Kamesh.
types: begin of itabs ,
      tabname type dd02l-tabname,
      end of itabs.
data: itab type itabs occurs 0 with header line.
data: counter type i.
data: begin of itab1 occurs 0,
tabname type dd02l-tabname,
counter type i,
end of itab1.
DATA: ITABTABNAME TYPE STRING.
DATA: LENGTH TYPE I.
DATA: OBJECT(30).
data: str(6) type c.
select tabname from dd02l into table itab where ( tabname LIKE '/BIC/F%' or tabname LIKE '/BIC/A%00' )
and TABCLASS = 'TRANSP' and AS4LOCAL = 'A'.
loop at itab.
select count(*) from (itab-tabname) into counter.
str = itab-tabname.
if str = '/BIC/F'.
LENGTH = STRLEN( ITAB-TABNAME ).
SHIFT itab-tabname BY 6 PLACES LEFT.
ELSEIf str = '/BIC/A'.
SHIFT itab-tabname BY 6 PLACES LEFT.
LENGTH = STRLEN( ITAB-TABNAME ).
LENGTH = LENGTH - 2.
endif.
itab1-tabname = itab-tabname(LENGTH).
append itab1.
itab1-counter = counter.
clear itab-tabname.
clear: COUNTER.
endloop.
*********** itab1
loop at itab1.
write:/ itab1-tabname, itab1-counter.
endloop.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
*   BIN_FILESIZE                    =
    FILENAME                        = 'c:records.xls'
    FILETYPE                        = 'ASC'
*   APPEND                          = ' '
    WRITE_FIELD_SEPARATOR           = ','
*   HEADER                          = '00'
*   TRUNC_TRAILING_BLANKS           = ' '
*   WRITE_LF                        = 'X'
*   COL_SELECT                      = ' '
*   COL_SELECT_MASK                 = ' '
*   DAT_MODE                        = ' '
*   CONFIRM_OVERWRITE               = ' '
*   NO_AUTH_CHECK                   = ' '
*   CODEPAGE                        = ' '
*   IGNORE_CERR                     = ABAP_TRUE
*   REPLACEMENT                     = '#'
*   WRITE_BOM                       = ' '
*   TRUNC_TRAILING_BLANKS_EOL       = 'X'
*   WK1_N_FORMAT                    = ' '
*   WK1_N_SIZE                      = ' '
*   WK1_T_FORMAT                    = ' '
*   WK1_T_SIZE                      = ' '
* IMPORTING
*   FILELENGTH                      =
TABLES
    DATA_TAB                        = itab1
*   FIELDNAMES                      =
* EXCEPTIONS
*   FILE_WRITE_ERROR                = 1
*   NO_BATCH                        = 2
*   GUI_REFUSE_FILETRANSFER         = 3
*   INVALID_TYPE                    = 4
*   NO_AUTHORITY                    = 5
*   UNKNOWN_ERROR                   = 6
*   HEADER_NOT_ALLOWED              = 7
*   SEPARATOR_NOT_ALLOWED           = 8
*   FILESIZE_NOT_ALLOWED            = 9
*   HEADER_TOO_LONG                 = 10
*   DP_ERROR_CREATE                 = 11
*   DP_ERROR_SEND                   = 12
*   DP_ERROR_WRITE                  = 13
*   UNKNOWN_DP_ERROR                = 14
*   ACCESS_DENIED                   = 15
*   DP_OUT_OF_MEMORY                = 16
*   DISK_FULL                       = 17
*   DP_TIMEOUT                      = 18
*   FILE_NOT_FOUND                  = 19
*   DATAPROVIDER_EXCEPTION          = 20
*   CONTROL_FLUSH_ERROR             = 21
*   OTHERS                          = 22
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Communication between the DNS/DHCP Manager and OES Server

No communication between the DNS/DHCP Manager Console and OES server (status,start,stop)
The screenshot shows the tab "DHCP (OES Linux)" in the DNS / DHCP Manager console
in the bottom of the image it shows the state of the DHCP servers.
allDHCP.JPG
The dhcp service is started on all these servers
You can see that the status is known only for four servers.
The button "start/stop DHCP service" works fine on this servers and
the dhcp service can be canceled and also restarted
But the status of the "dhcp service" is not recognized for all the other DHCP servers
and so we can not start or stop dhcp service on these servers.
All servers were installed at different times (last three years) with OES11 and
are upgraded to OES11SP2 with all patches.
The server keto (DHCP_keto) is a new installation OES11SP2 few days ago.
All OES servers were set up identically from me. LDAP, LUM, DMS, DHCP works fine.
Which service on the OES server is responsible for
communication (status indicator) between the DNS/DHCP Manager and the OES serve?
How the status query is performed by the DNS/DHCP Manager?
How can I test the communication to the server on the client (console)?
Which configurationfiles I should be compare on the server?
Thanks in advance
Gernot

gernot,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

How to set the number of records displayed at run time

Is it possible to set the number of records displayed block property at run time? The built-in 'GET_BLOCK_PROPERTY' can retrieve the number of RECORDS_DISPLAYED. But I can't find SET_BLOCK_PROPERTY to set this property. Is there anyway I can set this property programmatically? Thanks for any suggestions!

Bookmark Go to End
goal: How to vary the number of records displayed in a block
programmatically
fact: Oracle Forms Developer
fix:
Block property 'Number of Records Displayed' can not be changed during runtime
using SET_BLOCK_PROPERTY. However, it is still possible programmatically change
the visual appearance of the form so that it creates effect of changing this
property. To achieve such an effect follow these steps:
1. in Forms Builder, in the multirecord block define the new set of items.
The simplest way is to copy/paste the original item and rename created item.
2. set properties of these new items so that they are the same as the properties
of the original items. If these new items were copied from original items
then properties are already the same. Modify following properties
'Database item' on new items to value 'No'
'Synchronize with item' to the value of the original item
'Number of Items Displayed' to desired value.
'Visible' to 'No'
In other words, these new items are mirrors of original items.
3. code event, which is meant to trigger the change in block appearance.
This code should use SET_ITEM_PROPERTY built-in to set properties
like 'VISIBLE', 'ENABLED', 'NAVIGABLE', 'UPDATE_ALLOWED' and others
to desired value for items which are about to be displayed, then
move cursor to one of these just displayed items with GO_ITEM built-in
and then hide the previously displayed items.
Example:
Assume that the block is built on SCOTT.DEPT schema. Following will
change the set of displayed items
set_item_property('dept.mdeptno',visible,property_true);
set_item_property('dept.mdname',visible,property_true);
set_item_property('dept.mloc',visible,property_true);
set_item_property('dept.mdeptno',enabled,property_true);
set_item_property('dept.mdname',enabled,property_true);
set_item_property('dept.mloc',enabled,property_true);
set_item_property('dept.mdeptno',update_allowed,property_true);
set_item_property('dept.mdname',update_allowed,property_true);
set_item_property('dept.mloc',update_allowed,property_true);
set_item_property('dept.mdeptno',navigable,property_true);
set_item_property('dept.mdname',navigable,property_true);
set_item_property('dept.mloc',navigable,property_true);
go_item('dept.mdeptno');
set_item_property('dept.deptno',visible,property_false);
set_item_property('dept.dname',visible,property_false);
set_item_property('dept.loc',visible,property_false);
Regards,
Monica

How to know the count of record in CR XI?

Post Author: Liu ming
CA Forum: Deployment
Hi All,
I create a report by CR XI release 2. The report is viewed in ASP.Net. So, I would like show a message when the report have no record. My question is how to know the count of record?
Thanks.

I was able to do this by using
ora:countNodes('Receive_1_Read_InputVariable','BILL','/ns2:BILL/ns2:CMS1500')

How to find the number of records in ods?

how to find the number of records in ods?
Pls suggest the solution apart going to the table of ods and seeing the number of records.
Is there any program or function module to see the number of records in ods?
For eg: SAP_INFOCUBE_DESIGNS is a program which gives the detail (number of records) of infocube.

Hi,
I was looking at this and found the following tables that may be of help.
One of these tables will include a summary of the record count of all the tables in your system based on the last time each table had it's database statistics calculated:
DBSTATTADA
DBSTATTDB2
DBSTATTDB4
DBSTATTDB6
DBSTATTINF
DBSTATTMSS
DBSTATTORA
We run on an Oracle database so the table record counts can be taken from DBSTATTORA. Type in AZ in table selection field in SE16 to restrict the output to ODS (or DSO) tables only.
The record count is at the time indicated in the timestamp field. Obviously this is not real time but should not be too out of date - if it is you may be having performance issues and should get your DBA / Basis to run a full refresh of DB stats.
Hope this helps, alhtough not real time the table should give you a decent indication of the size of all your ODS objects (or any other table for that matter!)

How to Maintain the Pricing Condition Records in CRM

Hi
I am new to the CRM
How to maintain the pricing condition records in crm for the particular condition type?
as we do in SD(VK11)
Thanks

Hi Binu,
First of all, you could maintain pricing conditions in the following places:
1. In General Condition Maintenance (GCM)
2. At the product maintenance level
3. At the 'Price agreement' tab of Contracts
4. As manual conditions during order processing at item level
Now, if you want to maintain conditions using GCM, you first have to maintain a condition maintenance group in the customizing where in you can assign condition table and condition type for different counter values. I am assuming that you have done this activity successfully.
When you run the transaction '/SAPCND/GCM', for application 'CRM', your condition maintenance group name and context 'GCM', you will be initially taken to a screen where in you'll have an item area which would be blank and then condition fields would be displayed in a tree on the left.
Here, select the field 'Condition type' and click on icon 'Select records'. You would get a dialog prompting you to enter condition type. Here you can specifiy the condition type for which you want to maintain/view condition records.
If no condition records are available, item area would be left blank. Here, you can choose a condition type using the standard F4 help. Depending on condition types that are assigned to condition maintenance group, different condition types would be displayed in the F4-help using which you can maintain condition records.
Hope this helps.
Regards,
Pavithra
**PS: Please reward points if this helps.

How to stop the pdf reading record?

How to stop the pdf reading record? I don't want my track record to be leave on the computer.

Exactly what face reading program are you talking about? Did you download and install it?
Also, please furnish relevant information: Mac model/year.

How to change the text under RECORD WORKING TIME IN ESS.

Hi,
How to change the text under RECORD WORKING TIME in ESS.
Is there any setting at page or iview level?
Please help me.
Regards,
Thirun.

Hi,
If it is standard business package ,then check home page framework
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0e3a488-cdc2-2b10-209b-e01a0ed934b4
Regards
Koti Reddy

Please help : How to make the anomalistic table just like below?

Hi all,
How to make the anomalistic table just like below? Anyone can give the way detail or thoughtway ?
http://61.132.17.188/webber/table.gif

This is just a suggestion.
If you put your "JTable" in a "JScrollPane", then you can add any "java.awt.Component" to the corner of the "JScrollPane" -- using the "setCorner()" method (of "JScrollPane").
I would suggest making a custon "JPanel" and overriding its "paintComponent()" method to draw a diagonal line (and the required text) on it.
You can find out more about how to do this from the links I provided in my first reply.
Hope this helps.
Good Luck,
Avi.

How to monitor the database growth?

Dear All,
How to monitor the database growth in SAP.
Is there any t.code available to check the same.
advance thanks,
Sundar C
Note: suitable answers will get maximum reward points.

Hai,
You can check the database growth using tcode -db02.
and also use tcode-db02old(if the SAP is Netweaver2004s version) and click on space statistics for monitoring the datbase growth,
Thanks and Regards,

Can someone tell me how to make the letters that look like fabric?

Can someone tell me how to make the letters that look like fabric?

pharrout wrote:
Can someone tell me how to make the letters that look like fabric?
It could be as simple as clipping an image of the fabric of your choice, to a text layer.
In this example the Hessian texture was downloaded from Google images, and placed over a Type layer. You then Alt (Opt) click the intersection of the Type and Hessian layer to clip them together. This just means that only the shape of the underlying layer will show in the clipped layer.

HT6154 how to download the files from mail like gmail or yahoo or hotmail to my iphone 5s.I have not seen the option in my iphone 5s

how to download the files from mail like gmail or yahoo or hotmail to my iphone 5s.I have not seen the option in my iphone 5s

Download what files?
What is the actual problem that is occurring?

How to monitor the DNS & DHCP record like errors...

Similar Messages

Maybe you are looking for