How to move a running System to other Hardware ?
Hi,
got a running Solaris 2.8 System on a Ultra 1 Enterprise machine. I want to have this complete production System running on a unused Enterprise 250 (without hardware operations like moving harddisks from one machine to the other)
What i did:
-Made ufsdumps of all my Partitions on the U1 into files.
- Partitioned one disk (disk3) in the E250 according to my needs.
- Transferred the dumpfiles to the e250.
- filled the new Partitions with the Data.
- tried to boot from the new disk (disk3).
sure: this didn't work.
1. Problem: the /dev and /devices directorys, had them dumped also. info in there was wrong for the E250.
-> i used devfsadm to create new /dev and /devices directorys.
2. Problem: When the E250 boots from the disk3, it gets problems with the disk slices when running fsck. They are not there. If i enter maintenece mode (the only thing i can do) and start the format utility for instance, there is only one disk (c0t0d0) which is not the one i tried to boot from.
What is the regular way to complete the task of putting complete new hardware under a running production system ? Can it be done, without having the OS newly installed ?
Thanks a lot..
murph
Boot from the Solaris "Software 1 of 2" CDROM, mount
the HDD under "/a" and
run "devfsadm -v -r /a" to update the device nodes for
the new machine.
Fix the device entries in /a/etc/vfstab to use the new
device names.Hi J
Thank you very much for the answer.
Hmmm...it didn't work this way..
Obviously there are problems when mounting the Partitions from the new disk.
a snippet from the machines output, when booting from the new disk3 (typed here by hand)
Hostname: dps
The / file system (/dev/rdsk/c0t10d0s0) is beeing checked:
Can't open /dev/rdsk/c0t10d0s0
scary.
When the Machine was booted from cdrom and i ran dsvfsadm it created this /dev/rdsk/c0t10d0s0. I also adapted the /etc/vfstab file, so that this slice is used as root partition. But when booting from this disk, it can't be found.
At this point i can enter the system maintenence mode by typing the root password. In there, i call the format utility, and can see only 1 disk (out of 4) which is not the one, i booted from, i mean, not my new disk.
Do i have a driver problem ?? The kernel i'm trying to boot is from my Ultra1 machine...
Got another Idea ??
thank in advance
Alex
Similar Messages
-
How to move a particle system with arrow keys?
I have a little "ice fountain" particle effect and I want to
be able to move it like an object. How do I use actionscript to
effect a group particle system? (or have collision detection
features for that matter)
Code:
this.createEmptyMovieClip("holder2_mc",
this.getNextHighestDepth());
for(i=0;i<50;i++) {
var k:MovieClip = holder2_mc.attachMovie("ice","ice"+i
,holder2_mc.getNextHighestDepth());
k._y = 350;
k._xscale = Math.random()* 55 + 35;
k._yscale = Math.random()* 55 + 35;
k._x = Stage.width/2 -150;
k._rotation += Math.random()* 90 -45;
k.gotoAndPlay(Math.ceil(Math.random()*16));fixed:
holder2_mc coordinates had to be loaded outside onEnterframe
and outside the "for" but inside an onLoad, and the initial k
coordinates had to be shut down.
------------- Code --------------------
onLoad = function(){
holder2_mc._y = 350;
holder2_mc._x = Stage.width/2;
onEnterFrame = function(){
if(Key.isDown(Key.UP)){
holder2_mc._y -= 5;
if(Key.isDown(Key.DOWN)){
holder2_mc._y += 5;
if(Key.isDown(Key.LEFT)){
holder2_mc._x -= 5;
if(Key.isDown(Key.RIGHT)){
holder2_mc._x += 5;
if(Key.isDown(Key.SPACE)){
//trace(holder2_mc._y);
holder2_mc._rotation += 15;
this.createEmptyMovieClip("holder2_mc",
this.getNextHighestDepth());
for(i=0;i<150;i++) {
var k:MovieClip = holder2_mc.attachMovie("ice","ice"+i
,holder2_mc.getNextHighestDepth());
//k._y = 350;
k._xscale = Math.random()* 55 + 35;
k._yscale = Math.random()* 75 + 25;
//k._x = Stage.width/2 -150;
k._rotation += Math.random()* 90 -45;
k.gotoAndPlay(Math.ceil(Math.random()*16));
//k._y -= Math.random()* 100 +25;
//k._x += Math.random()* 100 -50; -
How to move Icons to system Tray on my TouchSmart 610-1130y
I would like to be able to move Icons to my system tray.
Click on Control Panel and then click Notification Area Icons. It will give you the list of available programs and behaviors to configure. If the program that you wish to be displayed is not displayed you can check the settings of that program to see if the option is available. If it is not you can drag any file or program to the taskbar and it will create the shortcut there for easy access.
Jonathan -
How to move one text item to other in form conditionaly
I am working in form 9i
Please some one can help me
when I am trying to move my one form field to other conditionally what will be my triger
I was using when vilidate item
the error comes
ora-40105
regard
s k swainuser591475 wrote:
I am trying to move this wasy
but the error is ora-40105
BEGIN
IF :ACCTRANDET.CRdr = 'Cr' then
go_item(':ACCTRANDET.camt');
else
go_item(':ACCTRANDET.amt');
end if;
end;change with this
BEGIN
IF :ACCTRANDET.CRdr = 'Cr' then
go_item('ACCTRANDET.camt');
else
go_item('ACCTRANDET.amt');
end if;
end; -
How can move Grid Control Repository to other server
hi,
We need to move our Oracle Grid Control Repository to Other server due to some Server Issuse....can someone helpme out......
OMR and OMA : Server A (Windows 2003 Server)
OMS : Server B (Windows 2003 Server)
Target Server : Server C (Windows 2003 Server)
Movement : Server A -----> Server C
Please help me someone.....
Thanks
JayPlease Refer the below doc for migration
http://download.oracle.com/docs/cd/B16240_01/doc/em.102/e10954/repository.htm#CHDBHDDC -
How ro move the EP6SP11 from one server(hardware) to another(hardware)r?
is there any transport tool?
or only re-install the EP again on the second server ?Hi,
There are many tools that claim or might probably work for many custom developed application or COTS.
To my experience extends, there is no way you can actually migrate "as is where is" to another server.
There are several things that you may want to consider which the tool will not and can not consider which I hope you will understand.
You can develop one specific suiting your needs, however the same cannot be generalized.
You certainly need to re-install in another server.
Hope this clarifies.
Regards,
Sen
P.S: If this helps you, please reward the points. -
I have problem with convesion from cartesian coordinate system to other one. I need use standard move function for example blend to moving 2 arms manipulator. What i need to do?
The vector move will probably not give the results you are looking for. The vector move calculates the trajectory based on unit vectors in cartesian space. For a 2 arm robot (ex. 2 rotation joints), you would be able to move from point A to point B as desired, however the path would not be a straight line. The path may also not be suitable for the mechanism, which could cause a collision or maybe a singularity.
The best solution is probably the contour move. You can use the inverse kinematic routine you wrote and send the results to a contour move. Contour moves are a little more complicated to use than the simple one axis or vector moves, however they are also much more flexible. I do not know of any functions already written for your system,
but it sounds like you are already on the right path.
Regards,
Brent Runnels
Applications Engineer
National Instruments -
How can i get the System Time from the other host
I want to get the System Time from the other host in the LAN,How can I get the Time using Java.
Such as I am in WIN 2000 and I have a Unix host in LAN, I want to get unix host System time, How can I do it.Open a socket to port 13 and read a string with the time.
-or-
Open a socket to port 27 and read 4 bytes that are a network order timestamp
Assuming that your UNIX machine has those services running, most do -
How do I move my operating system from one internal hard drive to another on the same Mac?
My question is pretty straightforward: How do I—or can I—move my operating system from one internal hard drive to another on the same Mac Pro desktop?
I'll let baltwo come in with a definitive answer, but the last time I just made a clone, CCC used Disk Utility to create a recovery partition on an external drive's partition. You get these windows successively (and it did create it with a message that it was successful):
-
How do i share files with a remote mac running system 10.4
I am trying to receive pictures on my iMac 27" from a remote Mac running system 10.4. How do we do this?
Then BDAqua's answers are what you're looking for.
There are other services, too - Sendspace for one, and an internet search should provide more. -
I have to reload my operating system. I created and copied my library info to a folder, itunesmedia, on a external drive. when I download itunes again, how do move the files back?
You need to follow the moving media per: http://support.apple.com/kb/HT1364
-
Problem description:
My iMac (early 2008) with OS 10.10.2 runs slow. I have run EtreCheck several times, and I am unable to move beyond Problem System Launch Agents (11 processes killed due to memory pressure) and Launch Daemons (12 processes killed).
EtreCheck version: 2.1.8 (121)
Report generated April 14, 2015 at 9:50:48 AM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (24-inch, Early 2008) (Verified)
iMac - model: iMac8,1
1 3.06 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR2 SDRAM 800 MHz ok
BANK 1/DIMM1
2 GB DDR2 SDRAM 800 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 8800 GS - VRAM: 512 MB
iMac 1920 x 1200
System Software: ℹ️
OS X 10.10.2 (14C1510) - Time since boot: 4 days 20:29:22
Disk Information: ℹ️
Hitachi HDS721010KLA330 disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
Mac iBook HD (disk0s2) / : 999.35 GB (521.60 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Configuration files: ℹ️
/etc/sysctl.conf - Exists
Gatekeeper: ℹ️
Mac App Store and identified developers
Problem System Launch Agents: ℹ️
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.CallHistorySyncHelper.plist
[killed] com.apple.coreservices.appleid.authentication.plist
[killed] com.apple.icloud.fmfd.plist
[killed] com.apple.Maps.pushdaemon.plist
[killed] com.apple.printtool.agent.plist
[killed] com.apple.SafariNotificationAgent.plist
[killed] com.apple.sbd.plist
[killed] com.apple.scopedbookmarkagent.xpc.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
[killed] com.apple.warmd_agent.plist
11 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.AssetCacheLocatorService.plist
[killed] com.apple.ctkd.plist
[killed] com.apple.emond.aslmanager.plist
[killed] com.apple.icloud.findmydeviced.plist
[killed] com.apple.ifdreader.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.nesessionmanager.plist
[killed] com.apple.periodic-daily.plist
[killed] com.apple.periodic-weekly.plist
[killed] com.apple.softwareupdate_download_service.plist
[killed] com.apple.wdhelper.plist
[killed] org.cups.cupsd.plist
12 processes killed due to memory pressure
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[running] com.adobe.AdobeCreativeCloud.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[running] com.arubanetworks.via.NetworkMonitorLaunchd.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[running] com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
ChronoSyncBackgrounder Application (/Library/Application Support/ChronoSync/ChronoSyncBackgrounder.app)
Dropbox Application (/Applications/Dropbox.app)
Canon IJ Network Scanner Selector2 Application Hidden (/Library/Printers/Canon/IJScanner/Utilities/Canon IJ Network Scanner Selector2.app)
Google Drive Application (/Applications/Google Drive.app)
Internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 6.1 [Click for support]
Default Browser: Version: 600 - SDK 10.10
AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
Flip4Mac WMV Plugin: Version: 3.1.0.24 - SDK 10.8 [Click for support]
OVSHelper: Version: 1.1 [Click for support]
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
DivX Web Player: Version: 3.2.4.1250 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
Flash Player: Version: 17.0.0.134 - SDK 10.6 Outdated! Update
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Click for support]
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User internet Plug-ins: ℹ️
WebEx: Version: 1.0 [Click for support]
Google Earth Web Plug-in: Version: 7.1 [Click for support]
3rd Party Preference Panes: ℹ️
Adobe Version Cue CS2 [Click for support]
Flash Player [Click for support]
Flip4Mac WMV [Click for support]
VIA PrefPane [Click for support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
3% WindowServer
3% Mail
2% com.apple.iCloudHelper
1% Creative Cloud
1% Google Chrome
Top Processes by Memory: ℹ️
223 MB Google Chrome
150 MB Finder
129 MB Google Chrome Helper
112 MB Mail
69 MB Google Drive
Virtual Memory Information: ℹ️
35 MB Free RAM
1.45 GB Active RAM
1.45 GB Inactive RAM
888 MB Wired RAM
27.01 GB Page-ins
851 MB Page-outsWhen you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
How to move the entries of table BNKAIN between systems
Hi,
Is there any way to export the entries of table BNKAIN from one SAP system (development) to another manually? This is the table which is not transported via a transport...even in development system the "transport entries" option is not active. IN SM30 the maintenance view is not created.
Can you advice how to move the entries somehow manually?
Thanks for any assistance!
br,SlawekHi, thanks for reply.
In fact I checked the table BNKA and the entries there are not helpful for me in the target system.
We are using there some user exit which is using the table BNKAIN and the following entries are there:
Client Bank Country Bank Key Internal bank
790 CA IHC6 1
790 DE IHC1 1
790 FI IHC 1
790 FR IHC3 1
790 GB IHC4 1
790 US IHC5 1
I checked the properties of that table in SE11 and it is maintainable only with restrictions..thus I need to ask some other basis expert which will help me to inlcude those entries into a transport.
Anyway thansk for your hints!
Bye -
System Call by Java Application - [change path and run of the other progra]
public class A {
public static void main (String[] args)
System.out.println("Hi");
}I do have above A.java.
I am generating A.class from it.
A.class is in the following directory :
/home/sachin/work/Sample_Directory/bin/hello_filetest/
I have another program which makes System call.
But the problem is B.java is in the different directory :
/home/sachin/work/Sample_Directory/src/hello_filetest/
public class B {
public static void main (String[] args) {
Process p1 = Runtime.getRuntime().exec("java A);
BufferedReader stdInput = new BufferedReader(new
InputStreamReader(p1.getInputStream()));
while ((s = stdInput.readLine()) != null) {
System.out.println(s);
{code}
So, my question is how to change directory by system calls and execute the program
which is lying in other directory ????
Thank you.The following code will call javac on a .java file, which will compile it into a .class file
public static void javacTest() {
JFileChooser jf = new JFileChooser();
if (jf.showOpenDialog(null) != jf.APPROVE_OPTION) return;
File file = jf.getSelectedFile();
File dir = file.getParentFile();
try {
Process p = Runtime.getRuntime().exec("javac " + file.getName(), null, dir);
IOUtils.pipe(p.getInputStream(), System.out);
IOUtils.pipe(p.getErrorStream(), System.out);
catch (IOException iox) {
iox.printStackTrace();
}Is that what you're trying to do, or are you trying to run the compiled (.class) file? Running your .class file should be basically the same as the above, assuming that you are not using any non j2se libraries, except that you need to take into account the package (if package is x.y, you must have file in ...src\x\y\foo.class - call "java x.y.foo" from src) -
How to import and run little movies made on my primarily still camera?
Camera: Sony DSC-N2
Makes besides photo's (jpeg) also mpeg movies (mov)
Could somebody tell me how to import and run them on my iPad2 ?Hello,
If you want to import them into your iPad without using iTunes you can get an Apple iPad Camera Connection Kit. Otherwise you can first import them into your computer then from your computer to your iPad using iTunes. Once they are on your iPad you can run them from the Videos app on your iPad.
Maybe you are looking for
-
OS X and Windows SMB home folders=SLOW
Okay, Here's the rundown of our mac lab setup: 14 Mac minis (late 2006, newly imaged with Mavericks and Office 2011) 2 DNS/AD DC's (dc1.domain.local - Windows 2003R2, dc2.domain.local - Windows 2008R2) A 3rd Windows 2003R2 server (fs1.domain.local) u
-
Error Occurred while sending mail through gmail account
Hello, I am writing 1 demo appln which will send a mail from my gmail account. It will show error like "javax.mail.MessagingException: 530 5.5.1 Authentication Required f77sm3109311pyh" Here is Code : - package demo; import java.util.Properties; impo
-
I have just got my MacBook and am trying out my iMovie. I have the disadvantage that I cannot access the help menu through my iMovie program. I have spoken to Apple and they have tried a lot of things and it cost a lot of money, but I still can't a
-
WLS 6.1 SP4: bug in ExecuteThread's contextClassLoader behavior?
Platform: WebLogic Server 6.1 SP4, JDK 1.3.1_06, Windows When creating a new thread from a serlvet with a current thread of type "weblogic.kernel.ExecuteThread", the contextClassLoader of the new thread is set incorrectly. The contextClassLoader of t
-
FPGA code successfully compiled in 2010 is giving compilation error in 2014.
I have developed RS485 FPGA code and successfully compiled with LabVIEW FPGA 2010. Later changed the software to 2014 and installed Xilinx 14.7. Now if I compile the same code with LabVIEW 2014 compile worker, i am getting error 'Process "Synthesis"