How to multiple/ parellal sets of books to generate more than one financial statement based on different (or the same) accounting principles.

How to multiple/ parallel sets of books to generate more than one financial statement based on different (or the same) accounting principles.
My Client needs Parallel Ledger in SAP B1 similar like SAP ECC. Is this functionality available ?

Dear Mr. Nagrajan,
Thank you for your response. I have already gone through documents but not able to understand. Is there any setup for this ? or its just work around i.e. using template and special field in JV i.e. Ref. 1 /2
My doubts :
I understand that Chart of Account structure is one and common for IFRS and other accounting method. We need to create only those account separately ( 2 times with prefix like IFRS revenue account, GAAP Revenue account).
Now at time of entry, Assume some entries / adjustment are specifically for IFRS and not for other ledger. In this case, What need to do ?
You have mentioned about DTW approach but do we need to insert all JV's again with other ledger ?
Someone suggested that if any entry which are specific to IFRS Ledger, We need to user Ref.1 /2 column or Transcation code column and in which we can put IFRS
Based on this, Need to create 2 seperate template for IFRS and other ledger for all report.
This is my understanding of Solution in SAP B1. Please help me to clarify my though process
Please do needful.If you have done implemenation and if you can share doucment, it would be great help.
Email :[email protected]

Similar Messages

  • How to read data from Logical Database ADA for more than one financia year

    Hi,
    I need to read data from ADA logical database and ANLCV node for current financial year 2007 and for the next 3 years – 2008, 2009, 2010. When I do this using program attached below, I receive only data for one year, which is entered at the selection screen in the field BERDATUM. How should I modify my program to read ANLCV node for more then one year ? Could anybody help me ?
    Kind regards,
    Zbigniew Debowski
    REPORT  ZWRZD075.
    NODES: anlav, anlcv.
    START-OF-SELECTION.
    GET anlav.
    WRITE:/ anlav-anln1, ' ', anlav-anln2.
    GET anlcv.
    WRITE:/ anlcv-kansw, ' ', anlcv-knafa, ' ', anlcv-gjahr.

    Hi!
    Have you already tried your luck in Java Programming forum?
    Regards,
    Thomas

  • Can we set "IN PROCESS" Status to more than one User

    Hi,
    As per my client current scenario every work item will be sent to 3 useru2019s (One is the supervisor of the other two users). If any one of the user executes the work item it will automatically call a Ztransaction and displays the screen. When any one of the user executes the workitem, then the workitems will dissappears from rest of the users inboxes; Setting "IN PROCESS" status for the person who executed the workitem. The workitem will be in "IN PROCESS" Status untill the User Press "SAVE" button in the transaction.
    If the person whose executed the workitem (IN PROCESS) status, has gone on unplanned leave; then the supervisor wants to forward the workitem of the current user to other user. How can he forward?
    Is there any option to set "In Process" status to more than one User? [Supervisor and Person who executed the workitem]
    Please provide me any advice to the above requirement.
    Thanks in advance,
    Ajay Kumar

    Can you ask your workflow administrator to forward the workitem to the user you want to be sent it to.
    I tried a small case wherein I had forwarded a workitem to myself and another user.
    As I executed it , it went into status IN process and at the same time it got removed from other users inbox .
    Now I went to T Code SWI1 and forwarded iut to another user say USABC.
    As a result the workitem again went into status "Ready" and into the inbox of the user ABC.
    So , you can try this in your case with the help of your workflow administrator.
    Another way is to create the other user as a substitue of the user who is currently executing the workitem.

  • SMARTFORM: how to create 3 copy (each copy can print more than one page)

    SMARTFORM: how to create 3 copy (each copy can print more than one page)
    Hello everyone.
    my user want to have form that print 3 copy.
    such as 1 copy description = master,  2 copy description = copy 1 ,3 copy description = copy 2.
    so i create 3 page . I copy from page 1.
    and in each page there is main window which can have data more than 1 page.(such as have a lot of sale data ,it's take 2 page for show output .so it's take 2 page in each copy)
    please help me.
    how to set page and window in each page for print 3 copy and each page can have main window that print more than 1 page

    Hello Vinit.
    thank you very much for your help.
    could you help me more please.
    in below code
      DO NAST_ANZAL TIMES.
    l_counter = l_counter + 1.  " << pass this to FM and use for the TEXT to print
    CALL FUNCTION LF_FM_NAME
               EXPORTING
                         COUNTER = l_COUNTER   " USE this to derive the text into PRINTOUT
    enddo.
    Now i out of office .so i cannot test.
    where do i set NAST_ANZAL for 3 ?
    can i input ?
    NAST_ANZAL = 3.
      DO NAST_ANZAL TIMES.
    l_counter = l_counter + 1.  " << pass this to FM and use for the TEXT to print
    CALL FUNCTION LF_FM_NAME
               EXPORTING
                         COUNTER = l_COUNTER   " USE this to derive the text into PRINTOUT
    enddo.
    Edited by: dittaporn nanasilp on Mar 12, 2011 3:33 PM

  • How to load and unload more than one external swf files in different frames?

    I do not have much experience on Adobe Flash or Action Script 3, but I know the basics.
    I am Arabic language teacher, and I design an application to teach Arabic, I just would like to learn how to load and unload more than one external swf files in different frames.
    Thanks

    Look into using the Loader class to load the swf files.  If you want to have it happen in different frames then you can put the code into the different frames.

  • How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

    How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

    If you bought a CC for team, you can log in at http://adobe.com and insert the e-mail that you gave at the moment at the purchase and than you can manage and see you product/plan/team.
    If I was not clear you can use the following link to help you solving your issue:
    Creative Cloud Help | Manage your Creative Cloud for teams membership
    If your not clear about this situation, contact with an agent of Adobe, by chat or phone. Use the following link to see the type of support you have on this matter:
    http://adobe.com/getsupport
    I think this will help you.
    Regards

  • RS_TREE... FMs : How do I generate more than one tree at a time ?

    Dear experts,
    we are using the RS_TREE function modules (such as RS_TREE_CREATE,
    RS_TREE_ADD_NODE...) for protocol purposes in various applications.
    Now it turned out to be a problem to generate more than one tree at the same
    time. It's always like "the last one wins".
    The initialization with RS_TREE_CREATE seems to destroy tree structures
    being in the process of construction.
    Does anyone have an idea of how to solve that kind of problem ?
    Thanks in advance for your (desperately wanted) help.
    Andreas

    Do you mean items in Finder?
    To highlight (select) a whole block of items :
    - click the top item you want
    - hold down Shift
    - click the bottom item you want
    The whole range from top to bottom will be highlighted
    To select random items :
    - click the first item
    - hold down the Command key
    - click any more items anywhere in the list
    Just the items you clicked will be highlighted
    This technique works also in apps like iTunes, iPhoto, etc.

  • How to export or delivery report for Excel for more than one sheet in OBIEE

    Hi Experts,
    How to export or delivery report for Excel for more than one sheet in OBIEE 11g? (Every time, I can only see one sheet.)
    Is it possibl to implement this requirement?
    Thanks.

    there are 2 oprions,
    One is have your tow report in a single compound layout of analysis and keep the report in dashboard and give report links.
    it will cath both your report.
    Suppose your analysis are different.
    Then you have the option of printing it to a PDF. on ritght top of Dashboard, Print - > Printable PDF.
    you ca export to PDF no to excel.
    mark if helps,
    fiaz

  • How to fix "More than one receiving system has been specified for the BAPI"

    Due to patching the HR system I am testing the functionalities in our test environment before patching the production system. When doing a hiring action (in our test environment) I get this error message at infotype 0000 when I try to save:
    "More than one receiving system has been specified for the BAPI (AcctngServices, CheckAccountAssignment)"
    It is message no. B1811
    My first suggestion weas that it could be the presence of dual connections in SALE, but disabling one of them didn't help.
    Since the Basis team is currently patching the HR system I wonder if that has any affect that might end out in the above error.
    Anyone who can help me out here? Please?

    Usually, when you have HR and FI on separate boxes, certain FI information (e.g. cost center) do not physically locate on HR box. Instead of replicating these data into HR for integrity check, you have an option (for a few countries) of remotely connecting from HR box to FI to do these checking though BAPI. I think this is the scenario you have (i.e. when doing the hiring, a new ee will be assigned to a personnel area which in turn default a cost center which SAP would need to check for integrity).
    Please go into distribution model, and check if for some reason, this is set up to go to to more than 1 destination for HR accounting integrity check.
    Rgds.
    Edited by: Ted Dinh on Jun 12, 2009 8:55 AM

  • How to apply data into 2 tables AND to more than one record in same table?

    Hello,
    I am trying to apply/insert data into 2 tables AND at the same time apply data to more than one record (in the same table). How would I do this in APEX?
    I have updated using one table with no problem, however, when I try updating with the two tables/ multiple record sets, I get errors.
    I appreciate the help.
    Thanks.
    Linda

    You can achieve what you want using PL/SQL. Can you post ur code?

  • How do i get my ipod touch to download more than one app at a time, can i make it toware i dont have to wait for one app to download before it starts downloading another,

    my ipod will only download one app at a time and runs extremely slow. i was wondering if there is some way that i can make it download more than one app at a time and how can i make the app start downloading again after i have left my wi-fi zone and then went back in. im really confused.

    Download everything on your computer in iTunes, then sync your iPod to iTunes.
    You should be syncing (backing up) to iTunes and your photo app regurally, anyway.

  • How do I save a a web address in more than one bookmark folder?

    I often want to store the address of a web address in more than one bookmark folder. Sometimes I know this when I first decide to save the address; other times I find I want to 'copy' an already stored bookmark in a second folder. I've struggled through the Firefox Help on bookmarks to uncover how to accomplish this -- but (as with so many online computer Help sections!) have been unable to find an answer to what is, obviously, a basic question!

    You can copy a bookmark from one folder and paste it in another folder to have a copy in more than one folder.

  • If I set up icloud will my data from my device download onto other device on the same account via icloud?

    I Don't want my data from my phone to backup on my other devices on the same account via icloud. will this happen if I set up icloud?

    Then on the device you don't want the information uncheck the iCloud items in the list.

  • How do i organize photos in chronological order from more than one import

    I photographed an event using more than one camera.  Therefore, I had to do more than one import.  For some reason the photos are in chronological order based on the camera they were shot with.  I have set the "view" to sort by "capture time, but for some reason it is not rearranging all of my selected photos to be in correct order.  I synchronized the camera times before I began shooting to avoid discrepancies in timing.  Please help this is killing me!

    lauren koplowitz wrote:
    I'm a complete moron.
    Even smart people are stupid sometimes .
    lauren koplowitz wrote:
    I had the time set to am not pm
    I've never made that mistake (ha-ha).
    lauren koplowitz wrote:
    Thank you so much if you had not helped me I would never have figured this out!
    You're welcome..
    lauren koplowitz wrote:
    Now is there any way to alter the metadata time stamp by 12 hours!?
    Yes:
    Note: I allow it to modify raw file too (an Lr Preference / catalog setting), but some people don't want their raws altered.
    Rob

  • How to keep transaction control in a wizard of more than one page

    How do I control a transaction across multiple pages with multiple row DML?
    I have a complicated business process. I want to build a wizard in my application. For example, to apply for a loan from a bank. A sequence of pages to take the user through a series of steps in the process, click Next and Previous to navigate the pages, click Cancel to undo, click Ok on the final page to commit work.
    I know there is a wizard widget in HTMLDB to generate pages 1 .. n in a wizard. But ...
    My question is this? How do I control the transaction. How do I stop HTMLDB commiting the steps as I go along. Somehow I want HTMLDB to remember all the information. I want to save everyting or nothing at the end of the process.
    I know this works if each page is a form with items. You can build a summary page. But what if a step requires multiple rows.
    For example
    Step 1 : A report to select Department to a form to Create/Update department
    Step 2 : A report to Form to Create/Update/Delete all Employees for that department.
    Step 3 : A report to Form to Create/Update/Delete some other thing for that department.
    What if
    I update department Sales, press Next, delete employee Rod, create employee Jane and Freddy, press Next. I have a change of heart to decide not to hire Jane and Freddy but keep Rod on to give him a second chance so I press Cancel on Step 3. HTMLDB has already saved the changes to the employees. How do I rollback to the original state of the world.
    1 ) f_g memory structures? No. I know I can get at a data structure if I use a multiple row update tabular form. Using the htmldb_application.f_g0n index by tables in the database. But I do not think it is possible on page x to get at the arrays for both the current page and the previous page? I dont want to use a tabular form in any case.
    2 ) Database Memory Structures ( in package x create type t is table of t%rowtype; ). No.
    3 ) Global temporary table ( create global temporary table t .. on commit delete rows )? No.
    2 + 3 is not an option because HTMLDB seems to me to use a connection pool. The session in the browser is constant. The session to the database USERENV('SESSIONID') may change every time you click something or refresh the page. In the web model every time you request an action you connect to the database with a new session.
    3) My solution. Have a copy of all the relevant tables. Do dml on the copy using the htmldb session as a unique identifier. Then to move the data from the copy tables to the real tables at the end of the process. Hope I catch all the cancel events to delete data from the copy tables. Just in case run a batch job run in the night to clean out the copy tables assuming no one is using the process at the time.
    My solution is ugly ! There must be a better way ?

    Ahhh, sorry for the confusion. What you need are "Collections". If you click the "Review Demonstration Applications" link then install the "Collections Showcase", this should give you a good working sample.
    Collections are comprised of an HTMLDB_COLLECTIONS package and an associated table. Use the package for creating a collection and adding members (rows) and use the table to query what's in your collection.
    Essentially, here's what you need to do. Let's assume your multi-row form is on page one and you have a confirmation page on page 2:
    - Create a process that fires on submit of page one that uses create_or_truncate to create your collection.
    - In the same process, loop over your collection items and add them (as members) to the collection.
    - Make sure your multi-row form queries from the collections view. This way if you go to page 2, then back to page 1, you will see your rows. When you go to page 2 again, you can just over-write the existing collection. There's another option, but I'll list that later.
    - Create a process on page 2 to loop over the collection view and insert the rows into a table. Make this conditional based on the button you press, such as "Save".
    - Extra credit: Either the collections package or the htmlb_utilities package as an md5 function. You can call this when querying the data out of the collections table, then call it again as you are looping over the data on submit. Basically, you are checksumming the row on the way out, then again when the page is submitted. If the 2 are equal, the data is unchanged. If they are not equal, the data has changed. Based on your needs, you can use this technique to insert / update records. I have an app that uses this technique because I have a before update trigger on the table that I only want to fire if the user actually updates a particular row.
    Hope this helps,
    Tyler

Maybe you are looking for