Keep getting time out connection error when my macair tries to connect to Internet, but my iPad, phone and PC connect straight away. It happens on and off what could be the problem?

Having trouble connecting to Internet with my MacBook Air. It can be fine for a few hours thins goes off and all I get it the message couldn't connect due to time out error connection. It can't be my broadband because I don't have the same problem with my other devices. Is my mac air breaking down?

looks like this is your network connection settings problem, you'd better only keep one network adaptor online and linked, if you do not understand how to setup windows routing, this is completely not firefox problem. buddy. wish you goodluck.

Similar Messages

  • When ever i try logging into FaceTime or iMessage on my Macpro i get The server encountered an error processing registration. Please try again later. what could be the problem..N.B I'm located in trinidad in the caribbean message

    When ever i try logging into FaceTime or iMessage on my Macpro i get The server encountered an error processing registration. Please try again later. what could be the problem..N.B I'm located in trinidad in the caribbean message

    Hi,
    As the Other threads suggests I would check the Date and Time settings on the Mac and compare that with the settings in the router.
    Messages (and iChat before that) send Time stamped info to Login and to send IMs.
    Obviously most people set their Macs to their Time Zone and nearest city/town.
    What people sometimes forget is that their Router/Modem device(s) have to be set correctly as well.
    EDIT
    Also Add a Public DNS server to your System Preferences> Network > Advanced Button > DNS  tab
    A Google one such as 8.8.4.4 or 8.8.8.8 seem to work well for most people
    10:15 PM      Saturday; March 17, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously
    Message was edited by: Ralph Johns (UK)

  • HT6413 I keep getting a installation pkg error when installing icloud for windows 7 on my pc.

    I keep getting an windows installation error when installing icloud for windows 7.  I have tried installing manually without success.

    There is a very long way which is removing anything related to Apple including stuff in the registry.
    The short way is as follows. It worked for me.
    I have seen that in the forum EXCEPT the registry trick which is missing and does the different.
    1. Remove the Apple account from Outlook.  In my case a me.com account.
    2. Disconnect the connection to ICloud in the control panel of version 3.1.
    REBOOT and open Outlook to see that all traces of the email account and of ICloud are gone.
    3. Uninstall ICloud 3.1. I used REVO Uninstaller in Safe way mode. It removed some stuff in the registry from what I see; but not sure.
    4. Delete as much stuff as possible in the C \Program Files (x86) \Common Files \ Apple
    and C\Program Files\Common Files \Apple.  My computer is 64 bits.
    5. Go to the registry by typing regedit.exe or simply type regedit in the Start Box. Search for ICloud.  I deleted TWO entries related to ICloud. Otherwise, you will still see the ICloud control panel despite the fact that you removed 3.1.
    6. then I was able to install ICloud 4 immediately.  Upon restarting it asked me my email and password and added itseft to Outlook like it was before. Be aware that you address book in Outlook could be deleted, so do an export before.

  • HT1926 I keep getting an msvcr80.dll error when trying to download newest version of iTunes.

    I keep getting an msvcr80.dll error when trying to download newest version of iTunes.

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99595)

  • HT4796 I keep getting a Windows Mail error when trying to run the assistant on my pc, but I don't have any email programs open.

    I keep getting a Windows Mail error when trying to run the assistant on my pc, but I don't have any email programs open.

    You could of course use Safari your default browser as a quick method of accessing gmail until you figure out the Firefox problem. (More than one browser may be used on a Mac or other computer).
    Is this the only site you have problems with ? and does Safari work ok ?
    Often this problem requires the page to be reloaded
    * try pressing the shift key as you reload the page
    Another problem is sometimes the cookies for that site need clearing
    * see [[Delete cookies to remove the information websites have stored on your computer#w_delete-cookies-for-a-single-site]]_delete-cookies-for-a-single-site
    * see also [[Firefox and other browsers can't load websites]] or[[Firefox can't load websites but other browsers can]]

  • I'm on 4.2.1 and keep getting timed out (err=.3259) when trying to download 4.3.3. I have tried disabling the firewall and antivirus but still no luck. Any ideas?

    I'm on 4.2.1 and keep getting timed out (err=.3259) when trying to download 4.3.3. I have tried disabling the firewall and antivirus but still no luck. Any ideas?

    I had the same problem! I don't know what caused it, possibly slow Internet but I suppose my antivirus or other software could have affected it. Maybe it's an iTunes problem.
    After restarting the download at least 5 times in iTunes after it timed out, I found this website. I didn't know this before, but you can download the update in your browser and then apply it to your iPhone in iTunes once it finishes. I used Firefox 4 and it downloaded without timing out once. All you have to do is hold down Shift and then click on Update in iTunes and it will prompt you to select the update that you downloaded and it will apply it.
    Try this and let me know how it works!

  • I keep getting kicked out of Safari when online. Is there a way to reinstall Safari?

    I Keep getting kicked out of Safari when online. Is there a way to reinstall Safari?

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    If that doesn't help, tap Settings > General > Reset > Reset Network Settings
    You will have to re enter your Wi-Fi password.
    No data is lost due to a reset.

  • Hi, every time i try downloading ios5 it reaches 100% and then the connection times out and nothing happens after that; though the internet connection is fine as i can access other sites etc. what could be the problem?i tried using 2 different modems.

    Hi, every time i try downloading ios5 it reaches 100% and then the connection times out and nothing happens after that; though the internet connection is fine as i can access other sites etc. what could be the problem?i tried using 2 different modems. Where can i download the ios5 from as my itunes is on my desktop which uses windows xp. Please help

    Download iOS 5.1
    iOS 5.1 (build 9B176) is compatible with iPad 1, iPad 2, iPhone 3GS, iPhone 4, iPhone 4S, iPod touch 3rd & 4th gen, and iPad 3. Additional builds are available for Apple TV 2 and Apple TV 3. The below download links are all direct downloads of iOS 5.1 from Apple.
    iPad 1
    iPad 2 Wi-Fi
    iPad 2 GSM (AT&T)
    iPad 2 CDMA (Verizon)
    iPad 2,4
    iPhone 3GS
    iPhone 4 GSM (AT&T)
    iPhone 4 CDMA (Verizon)
    iPhone 4S
    iPod touch 3G
    iPod touch 4G
    iPad 3 Wi-Fi
    iPad 3 GSM
    iPad 3 CDMA
    Apple TV 2 (9B179b1)
    Apple TV 3 (9B179b1)
    Source: http://osxdaily.com/2012/03/07/ios-5-1-download/

  • Hello. When I connect my imac Start, as usual, comes the start signal and then the white screen with the load signal then nothing happens. What could be the problem?

    Hello. When I connect my imac Start, as usual, comes the start signal and then the white screen with the load signal then nothing happens. What could be the problem?

    Presuming you get the chime, most of your Mac hardware is working and has passed the first part of the power-on self-test.
    If the screen comes on, basic graphics is working.
    The dark gray Apple is not present inside the Mac -- it must be loaded from a boot device. If the dark gray Apple appears, at least one of your boot devices has some capabilities. The flower petal/gear moves while Darwin is initializing and loading. If it stops immediately, something is terribly wrong.
    When the screen turns blue, Mac OS X has loaded and your graphics card transitions to Interrupt-driven operation. LoginWindow task draws the login screen, and Mac OS X is ready for login.
    What could be the problem depends on where in the process it stops, and whether the power light is blinking.

  • HT1454 I have a speaker with I phone 30 pin dock, it use to work fine but i am not getting error saying accessory not supported,how i can determine what could be the problem

    I have a speaker with I phone 30 pin dock, it use to work fine but i am not getting error saying accessory not supported,how i can determine what could be the problem
    i am getting the same error with my rf transmitter that i use in my car

    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Did this start happening after an iOS update? Sometimes an iOS update will break compatibility.
    Sometimes this works:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.

  • Hello,I have done this successful in the past but on my IPad it shows I have 4 apps that need to be updated so when I hit the update tab all I get is a white screen. When I hit the purchase or other tabs it opens up. What could be the problem?

    ****,I have done this successful in the past but on my IPad it shows I have 4 apps that need to be updated so when I hit the update tab all I get is a white screen. When I hit the purchase or other tabs it opens up. What could be the problem?

    There have been numerous reports on the forum today regarding this issue. It seems to be an issue at Apple, but no information has been posted on the status site.
    http://www.apple.com/support/systemstatus/

  • I am trying to put music into my 3rd gen ipod touch and older ipod shuffle but they do not show up on Itunes when i connect them,what could be the problem?

    i am trying to put music into my 3rd gen ipod touch and older ipod shuffle but neither are popping up on itunes, what could be the problem?

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • My iPhone 4 turns off (crashes) after accesing any apps, It work fine when plugged to charger. I tried all troubleshooting steps suggested by Apple but it doesn't work. What could be the problem and what are the solutions?

    My iPhone 4 turns off (crashes) after accesing any apps, It work fine when plugged to charger (power supply). I tried all troubleshooting steps suggested by Apple but it doesn't work. I backed up my phone. I restored it several times. Even I re-installed iphone software. Also I restored it as a new iphone but doesn't work. What could be the problem and what are the availble solutions?

    We can't know if there's a "fixture" because we can't examine your phone.  But Apple can.  Make a Genius Bar appointment and get your phone evaluated.

  • I Have mac osx 10.5.8 and have tried to update to mac osx snow leopard 10.6.3, but I constantly get the install failed message. What could be the problem?

    My imac is currently running mac os x 10.5.8. I've tried to install mac osx snow leopard 10.6.3, but have been unsuccesful because the disc fails to install.
    What could be the problem?

    noondaywitch wrote:
    You should boot from the Installer DVD by holding down the C key during start up until the Apple logo and spinning cog wheel appears. Allow plenty of time for the installer to appear - it can take several minutes when booting from a disc.
    I suggest not doing this unless the Apple recommended method (starting by double-clicking on the
    Install Mac OS X icon while booted up normally) fails.
    There are several reasons for this:
    The Apple method performs a check of the DVD's integrity before starting up from it. This can't be done if you start up directly from the DVD.
    The Apple method "phones home" using the current OS's network settings to check for updates to the incompatible items database included on the DVD & writes a lot of pre-install data (the 'Mac OS X Install Data' stuff) to the HD before restarting automatically from the DVD to finish the installation. This may not work as expected if you start up directly from the DVD.
    The pre-install data on the HD speeds up the installation process (because running the OS from the HD to build the data is faster than doing that while running from a DVD).
    The Apple method makes it possible to "gracefully" cancel the installation before the automatic restart occurs without leaving the existing OS on the HD in a corrupted, "half-installed" state unable to restart the Mac. This sometimes happens if the installation process hangs & one has to force-restart the Mac to recover. As long as this occurs during the "pre-install phase" before the restart, the existing OS should remain untouched & intact.
    Also note that the Snow Leopard installer is quite a bit more sophisticated than the previous ones like for Leopard or Tiger. It automatically performs the equivalent of Disk Utility's Verify Disk step before beginning the installation & performs more checks during the installation process (including checking the pre-install data for errors). It is usually not necessary to remove the "Mac OS X Install Data" folder after a failed installation, which may just cause the process to take longer on subsequent attempts, but if nothing else helps it is certainly something worth trying.

  • My 1st generation Time Capsule/2007 keeps shutting off and disconnecting from internet?  What could be the problem?  How long do the Time Capsules usually last?

    My 1st generation Time Capsule/2007 keeps shutting off and disconnecting from internet?  What could be the problem?  How long do the Time Capsules usually last?

    That it is still working is miraclous.. most have died.. lots started flaking out at 18months to 2years..
    See deadtimecapsule.org
    The few that remained now seem to have reached EOL.. you can repair if you have some skills.. fairly cheaply.
    But it is well and truly time to replace.
    https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair

Maybe you are looking for

  • Casting prob

    Imagine, I have an abstract class with 6 subclasses extending it. Objects of these subclasses are being put in an ArrayList. Now, when I loop the ArrayList and want to retrieve the attributes of each object I have to cast each object in the ArrayList

  • Cannot Edit Duplicate Server Behaviors (bugged?)

    Okay, here's a problem: I've got a user login page with two different forms on it - one to log in new users, and one to log in existing users. I applied a "log in user" server behavior to each of them. Now both of these server behaviors are showing u

  • For the iPad 2. Why don't they make a recording app just like the iPod or iPhone ?

    I have an iPad 2. I want to know why there isn't a recording app that isn't on for factory apps? Can they make an update or something for one?

  • Group Policies won't apply then un-configure themselves

    I'm having problem with Group Policies at ONE school (I have 59 other schools that are not having this problem). Running ZDM7sp1_SR4 on Netware 6.5 sp7 and e-dir 8.8- "Student Group Policy" files are sitting on sys\public\gpolicy\student\ I edit the

  • Please help convert MSSQL Stored Procedure to Oracle PL/SQL

    Hi there to all, this be my first post to these forums. I have already posted this question on a microsoft msdn forum, until someone advised that I ask my question here - dunno why I didnt think of that! ?:| Im working with an Oracle 10g Database fro