How to on Debugging Mode for T-Code F110 from Script in Sub routine Pool Pr

Hi Every one....
I have done SAP-Script for Payment Vocher for T-code F110 ..I have a Sub Routine Program where I have few Form statements which is called by SAP - Script using Perform Statements, But my problem is when I set a break point in Sub Routine pool program, the out put is issuing with out Debugger ...
Could any one plz suggest me wht to do???
Help ful answers will be rewarded....
Regards,
sg

Hi,
First see if the 'Perform' statement is getting triggered in Script. To put a breakpoint in any script ( even if you do not know the form name, that is the best part ) is se38---->RSTXDBUG --->F8 & execute your pgm/Transaction. The control will wait in the form-debugger.
I hope this helps,
Regards
Raju Chitale

Similar Messages

How to turn on debug mode for NW 7.3 trial version?

Hello SDN!
I've got a trial version of NW 73 from here: http://scn.sap.com/community/netweaver/blog/2012/07/12/netweaver-compositon-environment-73-trial-version-available-on-scn and installed it from instruction. Installation was OK and Java instance is up and running now. System asked me to change administrator password after I logon to the NWA for the first time. I've changed password and now I'm able to login to the NWA but system doesn't accept neither new administrator password nor OS users (root and cesadm users) passwords when I try to turn on debug mode for Java instance.
What I did wrong?
Regards, Lev

Hi Benny!
Thanks for answer.
The installation finished without any errors. Java instance run successfully. After install I opened browser right in VM window with url http://sapnwce73:50000/nwa to switch on debug mode. Since it was my first logon to the system as "Administrator" user the system asked me to change password. I've changed password and logon to NWA successfully as user with login "Administrator" and his new password. After I switched on debug mode the system asked me to login and password as shown on the follow screenshot:
This screen didn't accept neither Administrator user credentials, nor cesadm user credentials, nor root user credentials.
Also I've found that I'm not able to restart/stop Java instance because of the same issue - system doesn't accept user credentials.

How to configure debug mode in Oracle 11g ?

I am making Oracle Argus system based on Oracle 11g DB.
I heard there is debugging mode in Oracle DB to investigate trouble.
How to configure debug mode in Oracle 11g ?

Are you talking about oradebug:
SQL> oradebug setmypid
SQL> oradebug unlimit
SQL> oradebug dump systemstate 266
SQL> oradebug dump systemstate 266
SQL> oradebug -g all hanganalyze 3 ---> g is for RAC database instances
Thanks,
http://gssdba.wordpress.com

Detect DEBUG mode in ABAP code

Hi all,
Is there a way to detect that we are in DEBUGGING mode in ABAP code.
I need to determine this, because we have function modules that will be runned in a separate process in the background. If i could detect DEBUG mode, i could choose not to run these modules in the background, making debugging them possible.
Regards,
Rob.

When you debug a program that calls function modules using the IN BACKGROUND TASK addition, they are processed in a background work process (additional internal session). If you set the In background task: Do not process option, the system collects the function calls, but does not start the background work process. The Debugger assigns a transaction ID, which identifies the background work process uniquely. You can now start the Debugger for the background work process using transaction SM58. You can select the function module concerned here, and then execute it via the Edit menu.
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617d0ce68c11d2b2ab080009b43351/frameset.htm
There is a system variable SY-DEBUG, not sure if it works, though.
Regards,
Subramanian V.

Debug-Mode for Security Realm

Hi,
then i try start the server with the debug mode i get the following
exception:
Starting WebLogic Server ....
<Tue Oct 24 17:45:33 GMT+02:00 2000> <Info> <Management> <Loading
configuration file .\config\virtHoDomain\config.xml...>
Unable to dump log: Fatal initialization exception
Throwable: java.lang.StackOverflowError
java.lang.StackOverflowError
at java.util.Collections$SynchronizedMap.get(Collections.java:1433)
at
weblogic.kernel.ResettableThreadLocal.currentStorage(ResettableThreadLocal.j
ava:100)
at
weblogic.kernel.ResettableThreadLocal.get(ResettableThreadLocal.java:35)
at
weblogic.transaction.internal.TransactionManagerImpl.getOrCreateThreadProp(T
ransactionManagerImpl.java:844)
at
weblogic.transaction.internal.TransactionManagerImpl.getTransaction(Transact
ionManagerImpl.java:359)
at weblogic.transaction.TxHelper.getTransaction(TxHelper.java:34)
at
weblogic.management.logging.LogBroadcaster.log(LogBroadcaster.java:156)
at
weblogic.management.logging.LogBroadcaster.log(LogBroadcaster.java:145)
at
weblogic.management.logging.LogBroadcaster.log(LogBroadcaster.java:138)
at weblogic.logging.LogManager.log(LogManager.java:93)
at weblogic.logging.LogOutputStream.debug(LogOutputStream.java:80)
at weblogic.security.acl.CachingRealm.getUser(CachingRealm.java:775)
at weblogic.security.acl.Security.getCurrentUser(Security.java:238)
at
weblogic.management.logging.LogBroadcaster.log(LogBroadcaster.java:161)
at
weblogic.management.logging.LogBroadcaster.log(LogBroadcaster.java:145)
at
weblogic.management.logging.LogBroadcaster.log(LogBroadcaster.java:138)
at weblogic.logging.LogManager.log(LogManager.java:93)
at weblogic.logging.LogOutputStream.debug(LogOutputStream.java:80)
at weblogic.security.acl.CachingRealm.getUser(CachingRealm.java:775)
at weblogic.security.acl.Security.getCurrentUser(Security.java:238)
at
weblogic.management.logging.LogBroadcaster.log(LogBroadcaster.java:161)
at
weblogic.management.logging.LogBroadcaster.log(LogBroadcaster.java:145)
at
weblogic.management.logging.LogBroadcaster.log(LogBroadcaster.java:138)
at weblogic.logging.LogManager.log(LogManager.java:93)
I even get that exeception if try to initialize the
weblogic.logging.LogManager in a commun class.
I think this is a bug.

Hi Lars Klippert
Sorry for the late reply. First of all, thank you for uncovering an untested part of ServerDebug MBean. The Debug Mode for Security Realms currently works for fileRealm but doesnot work for alternate realms(e.g., LDAP realm). We're in the process of fixing this in the future releases(may not be Beta Refresh but will definitely be fixed in GA). I'm attaching a working config.xml(with fileRealm) and the only change you've to make to your config.xml is
<Server
<ServerDebug
DebugSecurityRealm="true"
Name="myserver"
/>
</Server>
If you're debugging a fileRealm then I belive, this serves your purpose. But if you're debugging a Security Realm other than fileRealm and this is blocking you, plz let us know so that this will be fixed with a higer priority. Thanks again for uncovering this. We will let you know as soon as this is fixed.
regards
"Lars Klippert" <[email protected]> wrote:
Hi,
Part from config.xml:
<Server ...>
<ServerDebug Name="virtHoServer" DebugSecurityRealm="false"/>
</Server>
Part from my start-script:
%JAVA_HOME%\bin\java.exe -ms16m -mx64m -classpath
%CLASSPATH% -Dweblogic.Domain=virtHoDomain -Dweblogic.Name=virtHoServer -Dja
va.security.policy==.\lib\weblogic.policy weblogic.Server
As you can see i enable the debug-mode in the config.xml.
I also get the exception then i disable the debug-modus and
initialize the weblogic.logging.LogOutputStream by hand.
For our EntityBeans we have developed a custom error logger
that uses the weblogic.logging.LogOutputStream and it works
fine. Maybe the error only acccours if two or more
weblogic.logging.LogOutputStreams are active...
With the 5.1.0 version of the server everything works fine.
Thanks
"Paul Ferwerda" <[email protected]> schrieb im Newsbeitrag
news:[email protected]...
How exactly are you starting "the server with debug mode"?
Thanks,
Paul
Lars Klippert wrote:
Hi,
then i try start the server with the debug mode i get the following
exception:
Starting WebLogic Server ....
<Tue Oct 24 17:45:33 GMT+02:00 2000> <Info> <Management> <Loading
configuration file .\config\virtHoDomain\config.xml...>
Unable to dump log: Fatal initialization exception
Throwable: java.lang.StackOverflowError
java.lang.StackOverflowError
at
java.util.Collections$SynchronizedMap.get(Collections.java:1433)
at
weblogic.kernel.ResettableThreadLocal.currentStorage(ResettableThreadLocal.j
ava:100)
at
weblogic.kernel.ResettableThreadLocal.get(ResettableThreadLocal.java:35)
at
weblogic.transaction.internal.TransactionManagerImpl.getOrCreateThreadProp(T
ransactionManagerImpl.java:844)
at
weblogic.transaction.internal.TransactionManagerImpl.getTransaction(Transact
ionManagerImpl.java:359)
atweblogic.transaction.TxHelper.getTransaction(TxHelper.java:34)
at
weblogic.management.logging.LogBroadcaster.log(LogBroadcaster.java:156)
at
weblogic.management.logging.LogBroadcaster.log(LogBroadcaster.java:145)
at
weblogic.management.logging.LogBroadcaster.log(LogBroadcaster.java:138)
at weblogic.logging.LogManager.log(LogManager.java:93)
atweblogic.logging.LogOutputStream.debug(LogOutputStream.java:80)
atweblogic.security.acl.CachingRealm.getUser(CachingRealm.java:775)
atweblogic.security.acl.Security.getCurrentUser(Security.java:238)
at
weblogic.management.logging.LogBroadcaster.log(LogBroadcaster.java:161)
at
weblogic.management.logging.LogBroadcaster.log(LogBroadcaster.java:145)
at
weblogic.management.logging.LogBroadcaster.log(LogBroadcaster.java:138)
at weblogic.logging.LogManager.log(LogManager.java:93)
atweblogic.logging.LogOutputStream.debug(LogOutputStream.java:80)
atweblogic.security.acl.CachingRealm.getUser(CachingRealm.java:775)
atweblogic.security.acl.Security.getCurrentUser(Security.java:238)
at
weblogic.management.logging.LogBroadcaster.log(LogBroadcaster.java:161)
at
weblogic.management.logging.LogBroadcaster.log(LogBroadcaster.java:145)
at
weblogic.management.logging.LogBroadcaster.log(LogBroadcaster.java:138)
at weblogic.logging.LogManager.log(LogManager.java:93)
I even get that exeception if try to initialize the
weblogic.logging.LogManager in a commun class.
I think this is a bug.

Enable the Debug mode for Dispatcher and Server0.

Hello All,
In our EP server 7.0(stand alone java) apart from SDM we need to enable the Debug mode for Dispatcher and Server0.I tried to do it from mmc but cannot do so.When I try to right click & enable from mmc the "Enable Process" is not highlited,it is disabled.How Can I enable the the Debug mode for Dispatcher and Server0?

Hi
Goto Configtool Select Instance_IDxxxxx on the right side you can see "Servers Debug" tab, select that and choose, enable debug and debuggable options.
Save the settings.
Then expand the above mentioned node and select Server_IDxxxxxxx , you will see a tab Debug select it and choose, enable debug and debuggable options.
Save the settings.
After it is done, take a restart of the instance. This should help you.
Regards
Rahul

Enabling debug mode for j2ee engine

hi,
I would like to enable the debug mode for my j2ee engine (installed on a remote host)
I followed already the below mentioned steps, but I was not successfull
http://help.sap.com/saphelp_nw04/helpdata/en/ae/40e1407e858031e10000000a1550b0/content.htm
In the NWDS I see always that the Productive Use is enabled (YES). How can I switch this field to NO?
kind regards
Michael

Here the steps...
1.     login to config tool
2.     access serverX node
3.     select debug manu
4.     select all 3 option(checkbox)
                  "DebugMode" -> "yes"
                  "DebugPort" -> "50021"
                  "Debuggable" -> "yes"
5.              restart engine.

How to enable debug mode?

Hi
We are doing some web dynpro development.
Can anyone tell me ho to enable debug mode in the server
Thanks
Vijay

Hi,
Check this blog, for some idea how to use configtool to set debug mode:
NetWeaver Portal Debugging
How to enable debug mode?
I see that you are new to this forum, first of all welcome to SDN.
I see that you have posted alot of questions today, really appreciate your interest in learning new stuff.
SDN is a great forum to start with but my suggestion is to first search the forum for answers to your questions before posting them, this way you will help yourself instead of waiting for people to help you out.
Greetings,
Praveen Gudapati
[Points are always welcome for helpful answers]

How to set Compatibility Mode for a single site in ie10

This question was originally posted on the Answers forum -
http://answers.microsoft.com/en-us/ie/forum/ie10-windows_7/how-to-set-compatibility-mode-for-a-single-site-in/187152e3-142a-4d96-8d1b-af82ef571eec
I am having problem with getting ie10 to set ie9 compatibility for a single site (sharepoint.contoso.com).
When I add this website in Compatibility View Settings (Alt > Tools > Compatibility View Settings > 'Add this Website') it adds the domain 'contoso.com' and not the individual website (sharepoint.contoso.com).
This cause other sites (www.contoso.com) to be configured to use compatibility mode. Because this is a separate site (different web server) to the site sharepoint.contoso.com (sharepoint 2010 server) we need different compatibility settings.
Using a different example to explain the issue -
Microsoft has three websites that are different websites created by different developers written in different programming languages and they only work with certain browsers.
microsoft.com (Website1 created by Developer1) - compatible with ie8/ie9/ie10
msdn.microsoft.com (Website2 created by Developer2) - compatible with ie8/ie9
technet.microsoft.com (Website3 website created by Developer3) - compatible only with ie10
The only thing the three website share is the URL contains 'microsoft.com'.
Marking 'msdn.microsoft.com' to run in compatibility mode affects the other 2 websites - mainly technet.microsoft.com which will not work now since it only runs in pure ie10 mode.
Should you be able to add an individual site to the compatibility list instead of all sites that have .microsoft.com in the URL? Am I missing a simple setting in the ie10?
As a workaround I am using the F12 Developer Tools to set the Browser Mode which temporary sets the compatibility mode. However this is not a nice solution to the end users at our organisation.

problem is not solved for non corporate environments...
You could start your own thread. Then if you got that answer and it was marked Answered you would have the ability to unmark it. The OP of this one seems satisfied. Also note that this is TechNet. Consumers can get help on Answers
forums.
Robert Aldwinckle
Oh! I wrote it wrong: I should have said: This is not solved for NON-AD environments. No demands what so ever to use Window 7/8 professional in a small corporation or on a big corporation with Island of smaller departments for example offshore.
The problem is that the thread is not "Answered" by the OP, its is marked answered by a moderator (and same moderator that did the answer) so no way of telling if the OP is satisfied.
But you are right in the fact that I am almost kidnapping the thread. But a complete answer would benefit all in this case I would presume.
Regards
/Aldus

How to set Update Mode for DSO in BI7.0?

Hi,
As you know in bw3.5, in update rules we can set the update mode for ods as Additive or overwrite functionality.
But can anybody tell me where are these settings in bi7.0? or
How to set Update Mode for DSO in BI7.0?
Thanks and Regrards,
Harshal

Dear Harshal,
GO to the tramsformations of your DSO..
In the Rule Group..Click on any key Figure..
this pops u a window..in which u will find AGGREGATION ..Then u can select Either OVERWRITe or SUMMATION which suites ur requirement..
Hope this helps u..
Assign points if helpful..
Best Regards,
VVenkat..

Debug Mode for CustomRealm

( maybe see as well entry #27 in this list)
For debugging / logging from my ( now working) CustomRealm implements DebugableRealm, i tried to set DebugSecurityRealm=true. Starting WL Server gives the behaviour, described in thread 27.
As well instanciating a new LogOutoustream results in runtime Stackoverflow.
The same thing works well wit a custom AuditProvider.
Are there sulutions to this problem ?
Thanks,
Paul

Thanks for the comment. i implmented my own debug file, so i can live with it for now.
Paul
"Suresh Vallabhaneni" <[email protected]> wrote:
>
Hi Paul
Sorry for the late reply. First of all, thank you for uncovering an untested part of ServerDebug MBean. The Debug Mode for Security Realms currently works for fileRealm but doesnot work for alternate realms(e.g., LDAP realm). We're in the process of fixing this in the future releases(may not be Beta Refresh but will definitely be fixed in GA). I'm attaching a working config.xml(with fileRealm) and the only change you've to make to your config.xml is
<Server
<ServerDebug
DebugSecurityRealm="true"
Name="myserver"
/>
</Server>
If you're debugging a fileRealm then I belive, this serves your purpose. But if you're debugging a Security Realm other than fileRealm and this is blocking you, plz let us know so that this will be fixed with a higer priority. Thanks again for uncovering this.Will let you know as soon as this is fixed.
regards
"Paul Hettl" <[email protected]> wrote:
( maybe see as well entry #27 in this list)
For debugging / logging from my ( now working) CustomRealm implements DebugableRealm, i tried to set DebugSecurityRealm=true. Starting WL Server gives the behaviour, described in thread 27.
As well instanciating a new LogOutoustream results in runtime Stackoverflow.
The same thing works well wit a custom AuditProvider.
Are there sulutions to this problem ?
Thanks,
Paul

How can i reset the for digit code?

how can i reset the for digit code?

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software.

Debug mode (EP6 SP 2) crashs from time to time

hi folks,
we got a very well running portal ep6 sp2 which
we use for iview development. the developers use
pdk and eclipse and we start the portal in debug
mode.
what happens is that from time to time it gets
unpossible to connect to the debug port. it is not
possbible to debug an iview from eclipse. the
connection to the debug port is not possible anymore.
the only solutions i got is a portal restart to ensure
that our developer can use the debug port. but that
takes too much time. does anybody know what leads to that
phenomenon? and how can we reanimate the portal to be
debugged without a complete restart?
i really appreciate any help,
maik

Hi Tracy,
Has it ever been shut off from AC power for any length of time?
I'm thinking a dead or weak PRAM Battery may cause the boot mode to change.
Unless of course it might be a sticky Shift key.
   1. Access the command line by either opening Terminal remotely, or by logging into the computer from another via SSH.
   2. Execute the following command in Terminal or on the command line:
      sudo nvram boot-args="-x"
      (If you want to start in Verbose mode as well, use sudo nvram boot-args="-x -v" instead )
   3. After using Safe Boot, to return to a normal startup, execute this command in Terminal or the command line:
      sudo nvram boot-args=""

How to pick document id for perticular case id from RMS

Hi,
Can anybody answer if you know "how to pick document id for perticular case id
from RMS".
please do the needful.
Thanks and REgards
-Sujatha

Alireza,
This is a really, really, really, really, really (really) really bad idea.
Using the max(id) + 1 trick:
1). WILL get you duplicates (think what happens when two people do this at roughly the same time.
2). Is horrible for scalability in general
3). If you use table locking to get around issue #1 is truly atrociously horrible for scalability.
[url http://forums.oracle.com/forums/thread.jspa?messageID=1901057]here is a previous discussion on this topic.
[url http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:3379873654938]here is an AskTom article on this topic (note the title of that post is "Locking Problems" - should give you a hint as to whether this is a great idea or not).
Sorry for refusing to answer your question directly, but the best answer is here:
I do not want to use insert triggers or
sequence generators or stored procedures, yes, you do So i have to read the max id
and increment it by one from inside the application. no you don't
This is a really bad idea.
Best,
john

How can I deactive software for Photoshop Elements 10 from my computer.

How do i deactivate software for Photoshop elements 10 from my computer. Help does not appear to have a deactivate command

If you have the mac app store version, there's no need to deactivate.

How to on Debugging Mode for T-Code F110 from Script in Sub routine Pool Pr

Similar Messages

Maybe you are looking for