How to open a file that resides on either application server or webserver

Hi all,
i need to open a pdf file when pressing a button in a form this file might exist on application server or a webserver.please i need the answer to this question as soon as possible

i did all the previous steps that u mentioned but the file didn't open
and i recieved the following line on the browser's page
The requested URL /forms/ktl/dalia.pdf was not found on this server.
please note that the folder that i'm making an alias for is the bin .does that represent a problem ?

Similar Messages

Whoops! How to open SD files that were renamed

Not knowing the specifics of file management for FCP, I recently recorded some material using a JVC camera that stores on SD cards, then moved the files onto my laptop. Directory structure was maintained, except I mistakenly changed the name of the top most directory, thinking this would help keep track of them. FCP 7.0.2 has given me a “General Error” message when trying to import these files. Thinking I could restore what was changed, I looked inside one of the associated XML files and found a directory name that I think was the changed one. I renamed this directory again, and now FCP gives me a “File error: 1 file(s) recognized, 0 access denied, 1 unknown” message. They play fine using VLC media player w/ the “treat as a pipe rather than as a file” setting. Any thoughts on how to rescue these files and open them in FCP would be most appreciated.

Sorry to have dropped the ball on this question - I got distracted by trying to solve the issue, with partial success, and haven't gotten back until now.
Chris, here are some of the specifics of my situation:
1) JVC GY-HM100 ver.1.050 camera
2) video = <Component uri="./CLPR/0990074_01/099_007401.MP4" type="MP4" offset="0" dur="1476" fps="23.98p" aspectRatio="16:9" ch="2"videoType="MPEG2HD351920_1080MP@HL" audioType="LPCM16"/>
Indeed, as long as the correct "MEDIAPRO.XML" file is in the correct directory, I can recover the files/clips, and they can be brought into FCP via the log & transfer function.
This camera also will create MOV files/clips, and these open in FCP using the open function.
I've still got some mp4 files/clips that don't seem to have a mediapro.xml file in the directory two levels up listing all the clips created at the same time. I've even tried cutting & pasting a file together altering uri names, but there are obviously some specifics that I'm missing. But these same mp4 clips will play in VLC. Any thoughts?

How to store multiple files from SAp in to Application server?

Hi Guys,
             Can anybody tell me how to store multiple files from SAP into Application server.in my application i have to get the data from SAP tables BSEG , BKPF , BSAK and BSIK that to daily i have to do.
            Any Logic or Code for how to do is welcomed.
                    plz help me urgently.
Thanks,
Gopi

Hi,
directories creates basis. If you have task to store data in application server you already should have information into which folder you have to do it. If you don't have this information because it is just for example training for next task then you can use your personal folder into which you have access. To get list of all available folders please look at attached code and form get_directories (you get the list of folders you see in transaction AL11). But don't forget: If you are using open dataset you have to have rights to access application folder!
Here you are code which I use to upload text files from local disc into application folder
Regards,
Karol
*& Report FILE_PC_TO_SAP
REPORT FILE_PC_TO_SAP.
DATA: BEGIN OF searchpoints OCCURS 100,
        DIRNAME(200)     TYPE c, " name of directory.
        sp_name(100)     TYPE c," name of entry. (may end with *)
      END OF searchpoints.
DATA: BEGIN OF isearchpoints OCCURS 10,
        dirname(75) TYPE c,            " name of directory.
        aliass(75) TYPE c,            " alias for directory.
        svrname(75) TYPE c,            " svr where directory is availabl
        sp_name(75) TYPE c,            " name of entry. (may end with *)
        sp_cs(10)   TYPE c,            " ContainsString pattern for name
      END OF isearchpoints.
data: l_file type filetable.
data: l_rc   type i.
data: itab   type TABLE OF string.
data: g_tmp_file_path type rlgrap-filename.
data: wa_itab type string.
data: h_destin(100) type c.
data: dat      type string.
INITIALIZATION.
perform get_directories.
START-OF-SELECTION.
parameters: in_file type string OBLIGATORY LOWER CASE.
parameters: destin(100) type c OBLIGATORY LOWER CASE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
   FILENAME                      = in_file
   "FILETYPE                      = 'BIN'
   FILETYPE                      = 'ASC'
   HAS_FIELD_SEPARATOR           = ' '
   HEADER_LENGTH                 = 0
   READ_BY_LINE                  = 'X'
   DAT_MODE                      = ' '
TABLES
    DATA_TAB                     = itab
EXCEPTIONS
   FILE_OPEN_ERROR               = 1
   FILE_READ_ERROR               = 2
   NO_BATCH                      = 3
   GUI_REFUSE_FILETRANSFER       = 4
   INVALID_TYPE                  = 5
   NO_AUTHORITY                  = 6
   UNKNOWN_ERROR                 = 7
   BAD_DATA_FORMAT               = 8
   HEADER_NOT_ALLOWED            = 9
   SEPARATOR_NOT_ALLOWED         = 10
   HEADER_TOO_LONG               = 11
   UNKNOWN_DP_ERROR              = 12
   ACCESS_DENIED                 = 13
   DP_OUT_OF_MEMORY              = 14
   DISK_FULL                     = 15
   DP_TIMEOUT                    = 16
   OTHERS                        = 17.
IF sy-SUBRC <> 0.
write: / 'Error during loading input file!'.
ENDIF.
if h_destin is INITIAL.
h_destin = in_file.
endif.
CONCATENATE destin h_destin into dat SEPARATED BY '/'.
*TRANSLATE dat TO UPPER CASE.
OPEN DATASET dat FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-SUBRC = 0.
loop at itab into wa_itab.
     TRANSFER: wa_itab TO dat.
endloop.
CLOSE DATASET dat.
write: / 'File uploaded!'.
ELSE.
write: / 'Not possible to open dataset'.
ENDIF.
at selection-screen on value-request for in_file.
perform select_input_file_name.
loop at l_file into g_tmp_file_path.
    move g_tmp_file_path to in_file.
    h_destin = ''.
    SPLIT g_tmp_file_path at '\' into table itab.
    loop at itab into g_tmp_file_path.
      h_destin = g_tmp_file_path.
    endloop.
endloop.
at selection-screen on value-request for destin.
DATA: lt_dfies    TYPE TABLE OF dfies.
DATA: lwa_dfies   TYPE dfies.
CALL FUNCTION 'DDIF_FIELDINFO_GET'
    EXPORTING
      tabname    = '/BI0/PCO_AREA'
      lfieldname = 'CO_AREA'
    IMPORTING
      dfies_wa   = lwa_dfies.
lwa_dfies-tabname = 'searchpoints'.
lwa_dfies-REPTEXT   = 'Destination directory'.
lwa_dfies-LENG      = 100.
lwa_dfies-INTLEN    = 100.
lwa_dfies-OUTPUTLEN = 100.
lwa_dfies-fieldname = 'SP_NAME'.
APPEND lwa_dfies TO lt_dfies.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      RETFIELD = 'SP_NAME'
      DYNPPROG = SY-REPID
      DYNPNR = SY-DYNNR
      DYNPROFIELD = 'destin'
      VALUE_ORG = 'S'
    TABLES
      VALUE_TAB = searchpoints
      FIELD_TAB = lt_dfies
    EXCEPTIONS
      PARAMETER_ERROR = 1
      NO_VALUES_FOUND = 2
      OTHERS = 3.
*&      Form select_input_file_name
*       text
form select_input_file_name.
* call function 'F4_FILENAME'
*       exporting
*            program_name = sy-repid
*            dynpro_number = sy-dynnr
*            field_name    = 'PATH'
*       importing
*            file_name     = g_tmp_file_path.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
EXPORTING
WINDOW_TITLE = 'Please choose a file'
"default_extension = '*.TXT'
"default_filename = 'C:\*.txt'
initial_directory = 'C:\'
file_filter = '*.*'
CHANGING
FILE_TABLE = l_file
RC = l_RC
EXCEPTIONS
FILE_OPEN_DIALOG_FAILED = 1
CNTL_ERROR = 2
ERROR_NO_GUI = 3
NOT_SUPPORTED_BY_GUI = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.                    "select_input_file_name
*&      Form WRITE_DB_HOME
*       Write DB home directory
*       no parameters
FORM write_db_home.
CASE sy-dbsys(3).
    WHEN 'ORA'.
      CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ORAHOME'
                         ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
*      PERFORM flip_flop(rsora000) USING cflag.
*      WRITE: / 'DIR_ORAHOME',       30 searchpoints-dirname.
      MOVE: 'DIR_ORAHOME'        TO searchpoints-sp_name.
      APPEND searchpoints.
*--- C5056155 End   of ALV -------------------------------*
    WHEN 'ADA'.
      CALL 'C_GETENV' ID 'NAME' FIELD 'DBROOT'
                      ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
*      PERFORM flip_flop(rsora000) USING cflag.
*      WRITE: / 'DIR_ADA_DBROOT',    30 searchpoints-dirname.
      MOVE: 'DIR_ADA_DBROOT'     TO searchpoints-sp_name.
      APPEND searchpoints.
*--- C5056155 End   of ALV -------------------------------*
    WHEN 'INF'.
      CALL 'C_GETENV' ID 'NAME' FIELD 'INFORMIXDIR'
                      ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
*      PERFORM flip_flop(rsora000) USING cflag.
*      WRITE: / 'DIR_INF_INFORMIXDIR', 30 searchpoints-dirname.
      MOVE: 'DIR_INF_INFORMIXDIR' TO searchpoints-sp_name.
      APPEND searchpoints..
*--- C5056155 End   of ALV -------------------------------*
    WHEN 'DB6'.
      CALL 'C_GETENV' ID 'NAME' FIELD 'INSTHOME'
                      ID 'VALUE' FIELD searchpoints-dirname.
      IF sy-subrc = 0.
*--- C5056155 Start of ALV -------------------------------*
*        PERFORM flip_flop(rsora000) USING cflag.
*        WRITE: / 'DIR_DB2_HOME',    30 searchpoints-dirname.
        MOVE: 'DIR_DB2_HOME'       TO searchpoints-sp_name.
        APPEND searchpoints.
*--- C5056155 End   of ALV -------------------------------*
      ELSE.
        EXIT.
      ENDIF.
    WHEN OTHERS.
      EXIT.
ENDCASE.
ENDFORM.                    " WRITE_DB_HOME
FORM get_directories.
* get the name and aliases of ALL userdefined directories
SELECT * FROM user_dir INTO isearchpoints
    WHERE svrname = sy-uname.
    MOVE isearchpoints-dirname to searchpoints-dirname.
    MOVE isearchpoints-aliass to searchpoints-sp_name.
    APPEND searchpoints.
ENDSELECT.
SELECT * FROM user_dir INTO isearchpoints
    WHERE svrname = 'all'.
    MOVE isearchpoints-dirname to searchpoints-dirname.
    MOVE isearchpoints-aliass to searchpoints-sp_name.
    APPEND searchpoints.
ENDSELECT.
* Get DB home
IF sy-dbsys(3) = 'ADA'.
    PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ATRA'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ATRA'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_BINARY'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_BINARY'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory $DIR_CCMS
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CCMS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CCMS'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_LOGGING'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_LOGGING'     TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_RUN'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_RUN'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DATA'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DATA'           TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'DB6'.
    PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DBMS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DBMS'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXECUTABLE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXECUTABLE'     TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXE_ROOT'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXE_ROOT'       TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN'            TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN_ROOT'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN_ROOT'       TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GLOBAL'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GLOBAL'         TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_EXE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_EXE'      TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_LIB'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_LIB'      TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_HOME'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_HOME'           TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'INF'.
    PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTALL'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTALL'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTANCE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTANCE'       TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LIBRARY'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LIBRARY'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LOGGING'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LOGGING'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the files written by the memory inspector
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_MEMORY_INSPECTOR'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_MEMORY_INSPECTOR' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'ORA'.
    PERFORM write_db_home.
ENDIF.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PAGING'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PAGING'         TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PUT'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PUT'            TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PERF'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PERF'           TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROFILE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROFILE'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROTOKOLLS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROTOKOLLS'     TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_REORG'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_REORG'          TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ROLL'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ROLL'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_RSYN'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_RSYN'           TO searchpoints-sp_name.
APPEND searchpoints.
* calculate directory for saphostagent (no sapparam available...)
IF ( sy-opsys(3) = 'WIN' ) OR ( sy-opsys(3) = 'Win' ).
    DATA: windir_path(64), programfiles_path(64).
*   hoping that ProgramFiles is set in service user environment
    CALL 'C_GETENV' ID 'NAME' FIELD 'ProgramFiles'
                    ID 'VALUE' FIELD programfiles_path.
    IF programfiles_path IS INITIAL.
*     %ProgramFiles% not available. guess from windir
      CALL 'C_GETENV' ID 'NAME' FIELD 'windir'
                      ID 'VALUE' FIELD windir_path.
*     e.g. S:\WINDOWS ==> S:\Program Files
      CONCATENATE windir_path(3) 'Program Files' INTO programfiles_path.
    ENDIF.
    CONCATENATE programfiles_path '\SAP\hostctrl'
                                             INTO searchpoints-dirname.
ELSE.
*   on UNIX, the path is hard coded
    searchpoints-dirname = '/usr/sap/hostctrl'.
ENDIF.
MOVE: 'DIR_SAPHOSTAGENT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SAPUSERS'
                     ID 'VALUE' FIELD searchpoints-dirname.
IF searchpoints-dirname = '.'.
    IF sy-opsys = 'Windows NT'.
      searchpoints-dirname = '.\'.
    ELSE.
      searchpoints-dirname = './'.
    ENDIF.
ENDIF.
MOVE: 'DIR_SAPUSERS'       TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SETUPS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SETUPS'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SORTTMP'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SORTTMP'        TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SOURCE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SOURCE'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TEMP'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TEMP'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRANS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRANS'          TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRFILES'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRFILES'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRSUB'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRSUB'          TO searchpoints-sp_name.
APPEND searchpoints.
* get the name of the current server.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'rdisp/myname'
                     ID 'VALUE' FIELD searchpoints-dirname.
data: h_ind type i.
LOOP AT searchpoints.
    h_ind = sy-tabix.
    IF searchpoints-sp_name IS INITIAL.
      DELETE searchpoints INDEX h_ind.
    ENDIF.
ENDLOOP.
ENDFORM.

How to delimited text file data being downloaded in Application server

Hi All,
How to delimited or having a tab between each fields in the data being downloaded to Application server. Please provide an example of code or how i should make changes to my below coding. Thanks.
eg. the out file in application server.
Field1#Field2#Field3
what I currently get was as below:-
Field1Field2Field3
My coding:
FORM download_outfile.
DATA : xfer(400).
IF rb_locl EQ 'X'.
    DESCRIBE TABLE itab LINES sy-tfill.
    IF sy-tfill GT 0.
      CALL FUNCTION 'WS_DOWNLOAD'
           EXPORTING
                filename            = p_file
                filetype            = 'DAT'
           TABLES
                data_tab            = itab
           EXCEPTIONS
                file_open_error     = 1
                file_write_error    = 2
                invalid_filesize    = 3
                invalid_table_width = 4
                invalid_type        = 5
                no_batch            = 6
                unknown_error       = 7
                OTHERS              = 8.
      IF sy-subrc EQ 0.
        WRITE : / 'download done.
      ELSE.
        WRITE : / '4)Error occured'.
      ENDIF.
    ENDIF.
ELSE.
    OPEN DATASET p_file FOR OUTPUT IN TEXT MODE.
    DATA : l_subrc LIKE sy-subrc.
    LOOP AT itab.
      MOVE itab TO xfer.
      TRANSFER xfer TO p_file.
      IF sy-subrc NE 0.
        l_subrc = sy-subrc.
      ENDIF.
    ENDLOOP.
    IF l_subrc EQ 0.
      WRITE :/ 'download done.
    ELSE.
      WRITE :/ 'error occurred.
    ENDIF.
    CLOSE DATASET p_file.
ENDIF.
ENDFORM

Hi,
Please check this sample codes.
OPEN DATASET P_DOWN FOR OUTPUT IN TEXT MODE. " P_DOWN is the file to download
IF SY-SUBRC = 0.
    CLEAR V_STRING.
*-- Download to the file
    LOOP AT IT_DOWN.
      CONCATENATE IT_DOWN-DISTTYPE
                  IT_DOWN-O_CITY
                  IT_DOWN-O_REGIO
                  IT_DOWN-O_PSTLZ
                  IT_DOWN-O_CTRY
                  IT_DOWN-D_CITY
                  IT_DOWN-D_REGIO
                  IT_DOWN-D_PSTLZ
                  IT_DOWN-D_CTRY
                  IT_DOWN-DISTANCE
             INTO V_STRING
             SEPARATED BY '09'.    " here 09 is the tab delimeter
      TRANSFER V_STRING TO P_DOWN.
      CLEAR V_STRING.
    ENDLOOP.
Regards,
Ferry Lianto

How to Open a file in Application Server

Hi All,
I am having a recquirement that I had to read the data from an Application Server file, I want to know whether any function modules are there to open a file that is in the Application server.
Thankx In advance,
Sri.

Hi,
If you are on windows, the solution is to create a shared directory anf give access rights to your sapservice <SID> user.
It's not really logical to put files on app servers because one app server can stopped without stopping the system.
So we decided to put all our shared directories on the Central Instance server.
Regards,
Olivier

How can I access files that I moved from an older MacBook Pro to a newer one via Firewire and Migration assistant. The files show up on the new MacBook but cannot be opened. Thanks!

How can I access files that I moved from an older MacBook Pro to a newer one via Firewire and Migration assistant? The files show up on the new MacBook but cannot be opened. Thanks!

Get info then check permissions then add your curent user name (it was probably different on old Mac) and give your username full read/write permissions.

How do I open a pdf book cover file using Acrobat XI into Indesign CC? Everytime I try, it says I am trying to open a file that has been saved wrong.

How do I open a pdf book cover file using Acrobat XI into Indesign CC? Everytime I try, it says I am trying to open a file that has been saved wrong.

PDF files cannot be natively opened in InDesign. They can only be placed as graphics.

How do I open the files that I have moved to creative cloud folder in Dreamweaver on the second computer?

How do I open the files that I have moved to creative cloud folder in Dreamweaver on the second computer?

Hello catherine915,
On your second computer, launch the Creative Cloud desktop app.
Click on the gear icon to display the dropdown menu. Select the option: "Creative Cloud Files"
This will open up the Creative Cloud folder with all the files that you have synced over cloud.
Hope this helps !
Cheers,
Subhadeep

How to run a exe file that is residing in the application server.

Hi,
I have a requirement in which a .exe (Windows executive) file needs to be run through code, which is residing in the application server. That exe file is nothing but a pdf-excel converter that will convert a pdf file to excel. The corresponding pdf file is also in the application server. Is there any function module to make this happen? I have come across the FM GUI_EXEC, but it operates on exe and pdf files that are in the presentation server.

hi
1. customise external command in sm69
2. use FM: SXPG_COMMAND_EXECUTE
regards,darek

How do I restore files that were backed up by Adobe?

How do I restore Files that were backed up by Adobe?

Where is the back-up e.g. on removable storage such as CD, DVD or external hard drive?
If the files are on Photoshop.com, then Elements can sync them back down, by following these steps:
Launch the Elements program.
Login to your photoshop.com account
Open Organizer
On the menu click Edit à Preferences à Backup/Synchronization
You should see all of your albums and media files on your photoshop.com account.
Mark those checkboxes that you want to restore to your computer.
Click OK.
N.B. Elements can only sync files back down to your hard drive which reside in albums on Photoshop.com

How to open a file created at the server through form/report at client end

How to open a file created at the server through form/report at client end
Dear Sir/Madame,
I am creating a exception report at the server-end using utl file utility. I want to display this report at the client end. A user doesn't have any access to server. Will u please write me the solution and oblige me.
Thanks
Rajesh Jain

One way of doing this is to write a PL/SQL procedure that uses UTL_FILE to read the file and DBMS_OUTPUT to display the contents to the users.
Cheers, APC

How to open CR2 files in photoshop elements 10

Who knows how to open CR2-files from a Canon Powershot S100 in Photoshop Elements 10?

Hi,
The version of Camera Raw that you reported should support the S100 CR2 images.
If you load the editor, go to the File menu and select Open, then point to the file, are you saying that it displays the error message?
Have you tried opening the file with Canon's Zoombrowser?
Which operating system are you running on?
Brian

How to open *.pdf files in BOXI r2 inbox

I am scheduling as *.pdf file for deski report.After scheduling i am getting *.pdf in my inbox.if the report is deski or webi we can use FC_REPORT_ENGINE or WI_REPORT_ENGINE to open the report's using java code.In same way how to open *.PDF file in Inbox?
Edited by: ramkishore kishore on Nov 7, 2008 8:31 AM
Edited by: ramkishore kishore on Nov 7, 2008 8:31 AM

Hi Ram,
Following information might help you to resolve the issue.
After logging into Desktop Intelligence, you may be presented with a message stating:
u201CYou have received 1 document from users"
Examining the Inbox from within the Desktop Intelligence client shows no objects visible in your Inbox.
The object in your Inbox is in a format other than Desktop Intelligence format such as, PDF, XLS or other format. Therefore the object is not recognized by the Desktop Intelligence client inbox browser.
Log in to Info View or the Central Management Console, browse to your Inbox and verify the file name and format that has been sent to your Inbox. The object may be saved, copied, moved or deleted as necessary.
Regards,
Sarbhjeet Kaur

How to open NRW-files in Lightroom 4?I

just bought Nikon's Coolpix P7800. It says you can shoot in Raw. Now I want to open these files in LR, just like I'm used to with my SLR's. But Nikon uses the NRW-format for Raw and LR says it doesn't recognise the files. Does someone know if there's a way to convert and work with these files in LR 4?

Thanks Jim for your response,
I will upgrade to 5.3
Kind regardsEut van Berkum
Op woensdag 28 januari 17:04 2015 schreef JimHess <[email protected]> het volgende:
how to open NRW-files in Lightroom 4?I
created by JimHess in Photoshop Lightroom - View the full discussionThe only way to use those files with Lightroom 4 is to convert them to DNG using DNG converter 8.3 or higher. The camera wasn't supported in Lightroom until version 5.3. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7140310#7140310 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7140310#7140310 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop Lightroom by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

How to open aspx. files in OS 10.8?

is this the right place to ask how to open aspx. files in OS 10.8.2?

Unfortunately aspx is a generic extender - it is a report generated by a server running Windows .net - it isn't an extender that actually tells what kind of file it is or what kind of data it holds. That's something you either have to know before hand so you can force the proper program to open it (or change the aspx extender to its real extender) or you have to find out what the file is.
At work our system's report generator gives everything an aspx extender. When I generate a report I decide whether it should be a PDF, Excel file, etc. After downloading the file I change its extender appropriately.

How to open a file that resides on either application server or webserver

Similar Messages

Maybe you are looking for