How to open a taskflow as popup

Hi any example to open taskflow as popup window

task flow as popup dialog in bounded task flow
It cannot be.

Similar Messages

How to open URL as a popup window through BRANCH in APEX reports

Hi
I am using APEX 4.0
I have a branch with a target type of URL. The branch is triggered by pressing a button. There is also a plsql process on the same button which fires at the process point of "On Submit-After Computations and Validations". I want to open the branch URL as the popup Window. I tried doing it with javascript, but then the plsql process doesn't execute. Any pointers will be helpful.
Thanks
Hina

You can use the apex.submit javascript function. This function allows to store some item value from session scope to database scope. So that a page process picks the correct item value. Not sure if it works with computations thou.
See the docs: JavaScript APIs
Example
Submits the current page with a REQUEST value of 'DELETE'.
apex.submit({ request:"DELETE", set:{"P1_DEPTNO":10, "P1_EMPNO":5433});
Then add a branch with type "branch to function returning URL" This page branch can be made conditional on the same request as the page process.
The returned url would be either include the javascript popup or window.open function or simply be the url. Important thing here would be to use a function that reads the url item from database state, since at that moment the computation or page process will have set the item on database level, but it is not directly available on page level.
meaning ":p2_item" or v('P2_ITEM') should work. &P2_ITEM. in the url will probably not work.

How to open 'share picture via' popup menu on android?

Hi there.
I made a little photo painting app on android where you can open (via the native file opener with filerefence.browse() it works beautifully) and save (directly to CameraRoll with addBitmapData also works perfectly) an image. Now i would like to share the saved image.
I would like to use the native android 'share picture via' popup. I found on a forum the native code for it ( http://stackoverflow.com/questions/3553017/android-share-via-dialog ).
Since we cannot execute native code for mobiles as i can read from the flash doc, is there a way to get this working at all?
Thanks a lot for the help!

I too would like to know if this is possible. I use it all the time with native apps to send files to my dropbox. If it was up to me, this would be a MUST HAVE feature.
Mike

How to open an image in popup window?

HI,
In my project there is some text and a small picture. I want
when I click on this image a window appears with the full picture
with only close option.
ANy idea !!
thanks

Oops. Sorry bout that... :-)
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute">
<mx:HBox width="30%" height="80%" borderStyle="solid"
borderColor="#fffffc" borderThickness="2">
<mx:Image source="1.jpg" width="60" height="90"
click="navigateToURL(new URLRequest('1.jpg'),'_blank')"/>
<mx:TextArea height="300" width="288"
horizontalScrollPolicy="off"
verticalScrollPolicy="off" letterSpacing="1"
backgroundAlpha="0"
borderThickness="0" fontSize="12" fontFamily="Times New
Roman"
wordWrap="true" textAlign="left" backgroundColor="#869ca7"
color="#ffffff">
<mx:htmlText>
<![CDATA[
This is cardiovascular medicine.translate the
extraordinary progress of Promote heart health. At the nucleus of
SCVI is a richl as it iscardiovascular
medicine.This is cardiovascular
medicine.translate the extraordinary progress of science and rich
thing.Cardiovascular medicineThis is
cardiovascular medicine.translate the extraordinary progress.

]]>
</mx:htmlText>
</mx:TextArea>
</mx:HBox>
</mx:Application>

How to open a jspx in a popup from managed bean.

Hello,
I'm using Studio Edition Version 11.1.1.4.0.
I have a JSPX that is to be used as an application monitor screen. So it contains 5 af:tables with plenty of columns & query search criteria. Each of the tables has context sensitive menus as well as double click functionality.
When I write everything in a single JSPX, the code functions as expected. i.e. menu items & double click actions open new popups with requisite data. However, single JSPX becomes huge in size and hence difficult to maintain.
When I transfer code to another JSPX, How do I call the new JSPX in a popup from the managed bean?
Regards,
Amar

Try this:
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/53-taskflow-in-popup-169196.pdf

Opening TaskFlow as Popup

Hi All,
For Opening the task flow as popup. I have created 2 taksflows wiith one as .jsff and another one as .jspx.but for opening as a dialog it is accepting only .jspx but as per my requirment i need .jsff that is in bounded Task flow with page fragment.....Jdeveloper is not allowing me to create.kindly suggest why it is protesting and how can it be acheived.
I am using Jdev 11.1.2.0
plz kindly suggest a sol.
I have seen this thread but no replys.....It may be usful for both the threads
TaskFlow Region as a Pop Up inside another TaskFlow Region
Regrads
Peter

Hi Frank,
I am looking for a solution to develop a popup as a template or component in ADF since our app uses lots of popups. I try to build own buttons, like SAVE, APPLY, and CANCEL buttons.
I have listened to many of your video and code corners. The following video shows the java controlled popup. It invokes a page fragment in the popup. The questionis : can this method used to popup a taskflow ?
http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/ADF_Insider_Essentials/AdfFacesDialogOkCancelHandling/AdfFacesDialogOkCancelHandling.html
I have two task flows, popup-parent-taskflow.xml and popup-taskflow.xml.
The managed bean in popup-parent-taskflow.xml binds to the popup and table. The managedBean is in the Request scope
The managed bean defined in the popup-taskflow.xml can't access to the popup and table. How is the table get refreshed ?
"There is a pattern that explains how to do similar with Page Fragments, but honestly this is quite a lot of coding and doesn't allow your task flow to decoratively return values."
Could you explain this statement ? Is this example you talked about ?
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/39-taskflow-in-popup-169181.pdf
I would appreciate if you could suggest a best way to do popup for my case and provide the example for it.
Thank you !
David

How to open (popup) a windows folder from a page?

Hi,
I´m building an application using Oracle Application Express (version 4.2). I need to open a windows folder (popup) using a button located wihtin a region (Region Type: HTML) . The configuration I used for the button item is:
Name:
Application: 109SCSG_oficial_Fll
Page: 11 Ficha- Modificar Ficha
Name: P11_OPEN_XPLORER
Text Label/Alt: Abrir
Attributes:
Attributes: Image
Image: mfopen.gif (it is an picture of a little folder)
Attributtes: onClick="openFolder('P11_XPLORER');" (where P11_XPLORER is a text field filled from a oracle table with the folder´s path, e.g C:\3219)
Action when Button is clicked:
Action: Submit Page
Excetute Validations: No
Button Request: openFolder('C:\3219');
It is not opening any windows folder. I appreciate any information regards how to configure a button item in order to do this.
Regards,
Luis

This is illegal with in the realm of Web Pages.
The most you can hope for is putting up a "File Browse.." item type.
Now, if the files were placed where the Oracle Server can access it....
(please remember: Servers are not allowed to 'access' client machines.)

I keep getting the an Alexa Sparky pop-up each time I open Firefox, it does not provide a "no" option... how can I permanently stop the popup?

Every time I open Firefox, I get a pop-up asking me to install the Alexa Sparky toolbar--which I do not want. The pop-up box does not offer an option to say "no" or "do not ask me again", which is VERY annoying. How can I permanently stop the popup?

'''This worked for me:'''
How to disable extensions, Personas, and plugins
Disabling an add-on will turn it off without removing it:
At the top of the Firefox window, click on the Firefox button (Tools menu in Windows XP), and then click Add-ons. The Add-ons Manager tab will open.
In the Add-ons Manager tab, select the Extensions or Appearance or Plugins panel.
Select the add-on you wish to disable.
Click the Disable button.
Click Restart now if it pops up. Your tabs will be saved and restored after the restart.
To re-enable the add-on, find it in the list of Add-ons and click Enable, then restart Firefox.

I have an iMac on OSX 10.7.5 with Safari 6.1.6. Opening Safari produces a popup that cannot be removed, thus disabling everything else. How can I eliminate this?

I have an iMac on OSX 10.7.5 with Safari 6.1.6. Opening Safari produces a popup that cannot be removed, thus disabling everything else. How can I eliminate this?

Launch Safari with the Shift key held down. If that doesn't work, temporarily disconnect the computer from the Internet.
(124400)

How to open a single WD Component in a popup window?

Hi,
I want to open a WD component in a popup window but don't know how. I have searched this forum without a result.
The following situation:
DC1 (main DC) with a button to open the popup
DC2 (popup DC)
How can I open DC2 in a popup window without destroying DC1 in a way like
if (!DC1.hasActiveComponent()) {
mainR_Usage.createComponent("my.comp.DC2","my.comp/comp~DC2~wd");
and of course how can I destroy the DC2-popup from DC1?
The general problem is not to open a popup window inside DC1. The problem is to open DC2 as a popup!
Thanks ahead

Hi Bernd,
You can try this:
1.Create a context attribute of the type IWDWindow in your view/Component Controller of DC2, say 'PopupWindow'
2.Create a method in your DC2, say
openPopup()
IWDWindowInfo winInfo = (IWDWindowInfo)wdComponentAPI.getComponentInfo().findInWindows("DC2Window");
       IWDWindow popup= (IWDWindow)wdComponentAPI.getWindowManager().createModalWindow(winInfo);
       wdContext.currentPopupElement().setPopupAttribute(popup);
       popup.setTitle("Hello, this is DC2");
       popup.setWindowSize(600,500);
       popup.setWindowPosition(100,100);
       popup.show();
                       +// Save WindowIsnstance in Context
     wdContext.currentContextElement().setPopUpWindow(window);+
3.Expose this method in your Interface controller so that it is available to be called by DC1
4.in your DC1 you can call this method
      if((!DC1.hasActiveComponent())
     wdThis.wdGetDC2ComponentUsage().createComponent();
     wdThis.wdGetDC2Interface().openPopup();
5.This should open the popup window from DC2.
6. You can have a close button or any other event on the view contained in this window itself. On click of this button you can retrive the window instance stored in the context and destroy it.
e.g we have an action assigned to a Close button. this will be in the view from the window you are trying to open as a popup.
onActionCloseWindow()
         IWDWindow window = wdContext.currentContextElement().getPopUpWindow();
         window.destroyInstance();
this should close yourr popup window.
Regards,
Ajay
Edited by: Ajay Patil on Jul 6, 2010 10:27 PM

How to open modal popup using javascript in iPad ?

Hi Apps masters
How to open modal dialog ?
How to return selected value to parent value ?
How to close modal dialog ??
Thanks,

Hi,
Try This
function aboutOkButton(event) {
var v= event.getSource();
var popup = v.findComponent("popupId");
popup.hide();
event.cancel();
Sameh Nassar

Hi: When I open my iPhoto the popup shows up and I don't know how to correct it. Here is the popup "The current screen resolution is not optimal for iPhoto?" Can you help

When I open my iPhoto a popup shows up and I don't know how to correct it the popup:
"The current screen resoulation is not optimal for iPhotp"?
Can you help?

Go to the System/Accesability preference pane and enable the Zoom capability either with keystrokes or Magic Mouse:
See if that will work for you.
OT

How to show modal window without popup in a web page using javascript

Hi,
How to show modal window without popup in a web page using javascript, means when the modalwindow is opened it should not ask for popup blocker alert......
pls help me.....

Thanx for ur reply,
Actually the senario is when i click on a button, another jsp page should be displayed in a modal window without popup, but the functions alert() and confirm() will not accept the url path of the another jsp page...

How to open and navigate between human task forms in a same page?

Hi
I use Oracle BPM 11.1.1.5
I have a question about taskflows in BPM Application.
In ADF web application, I create a sipmle task flow and insert view id and bind these to jspx pages, my pages are opend in same page when
return an outcome.
For exapmle I have three pages like A,B,C.
In task flow, insert three view ids and bind to A,B,C.
My first pages is A, and when outcome is B navigate to B, when my outcome is C then navigate to C in a same page not separate pages.
But my problem is here.. in BPM Application when create task forms, every task has a separate task flow that there exist a single view id and a wild card flow in it.
In BPM workspace when initiate human task form is closed, I should press refresh button to see next human task form in task list table.
I tried to create a simple task flow and insert human task forms in it and navigate between these.. but show human task form in wrong display and don`t show some component and human task payload.
Now, my question : How to open and navigate between human task forms in a same page like software installation?

Having a separate Data Control for each human task is normally the case. There is a way to assign multiple human tasks to a single data control (and one task flow), but I don't think that this is going to help you with what I think you're trying to do.
If your human task is called "EmployeeDetail", then you'd use the data control associated with this for the UI pages in the task flow diagram that is associated with this human task. For example, you might have a first page that has just the basic employee information - the fields (at least the ID field) would come from the EmployeeDetail data control. When the end user clicks "Next", you might have this UI page flow to a second UI page in the task flow diagram that has the employee's address information. You might place the address fields from the EmployeeDetail data control onto this second UI page.
You might be asking how the work item instance can automatically flow to the next interactive activity in the process while staying inside the first interactive activity's human task's task flow diagram. This is not how it works - the task flow diagram models the end user interaction while inside a single human task that is tied to a specific interactive activity in the process. If you want a the end user to be able to move the instance through multiple interactive activities in the process in one interaction, look at "Activity Guides". Activity Guides do a nice job of this.
Dan

Firefox won't allow some sites to open lightboxes or login popups.

OS: Windows 8.1 (64 bit) x64 AMD E-300 Processor
Firefox 25.0.1
I just got a new laptop and have discovered this issue: When I try to click links on some sites to open a lightbox or popup (usually for login boxes or photo slideshows) nothing happens. Absolutely nothing, no error message, no loading screen, no "busy" or "working" animations, no redirect. I've tried the same pages in the latest versions of Internet Explorer and Chrome and they work correctly. These sites work on my old laptop with the same version of Firefox and Vista SP2 32 bit and my work computer with Windows 7 64 bit.
I've tried disabling Add-Ons one by one and as a group, didn't make a difference. I've cleared the cache and cookies. I've turned by firewall and antivirus/antispyware/antimalware programs on and off.
Sites with a known issue: "View larger images" on Zillow.com, Login on Moviepilot.com, Login on doubletakedeals.com. I can't remember any others at the moment.

If you use extensions (Firefox/Tools > Add-ons > Extensions) that can block content (e.g. Adblock Plus, NoScript, Flash Block, Ghostery) then make sure that such extensions aren't blocking content.
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can inspect and manage the permissions for all domains on the about:permissions page or for the domain in the currently selected tab by clicking the "Site Identity Button" (globe/padlock) on the location bar and "More Information" to open "Page Info" and go to the Permissions tab.
*https://support.mozilla.org/kb/how-do-i-manage-website-permissions
*Tools > Page Info > Permissions
You can delete the permissions.sqlite file to reset all permissions.
Boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.

How to open a taskflow as popup

Similar Messages

Maybe you are looking for