How to Organizational Changes

Hi Team,
             We are planning to use the Functionality Organizational Changes for Total Transfer and Partial Transfers of Consolidation units from one consolidaion group to other groups,
We have Configured the following
1.Enabled organisation change  in the Consolidation area,
2.Created Organizational Change Number for Sending and Receiving Consolidation groups
3 Created Document types with posting level 02, 12, 22
4.Created a tasks.
5.Assigned Fs item in COI settings.
Do we need to do anything else  in Consolidation of Investment for this?
What is Activity for Organizational Change logic and how to configure this.
Thanks in advance
Kind Regards
Sreedhar

HI
It will be good if you can send some scenarios as  OC logic will need to be inserted in the  MAster Data for Consolidation Units within a  consoliodation Group indicating transfer is with OC logic and inserting that number & in few cases inputtign the end date as 06/2009 e.g in the sender & receiver group same data as starting
It again depends how is the move is it vertical move horizontal move or same level
then with his that OC logic Number you have to configure all Reciever & sender Entitties starting from the immeidate Parent to the uppermost parent
Hope this gives some clarity ,do rite back for more details
rgds
dheeraj

Similar Messages

  • How can I change the organization information on my trust profile?

    I'm re-configuring Lion Server for a company who has changed their name, domain, etc.
    I have everything updated SSL cert, Code signing cert wise to their new name.
    However, the trust profile still has the OLD organization name. How can I change this?

    Go to Settings>General>Reset>Erase all content and settings
    The give him the iPod. It it already has iOS 5 he can set it up via iTunes/USB or wifi. It not then his has to set it up via iTunes/USB. If the iPod is a1G or 2G iPod make sure the iPod is connected to a charging source since the erase can take hours.

  • How do I change my organization name?

    How do I change my organization name?

    What does this have to do with InDesign, the topic of this forum?

  • How can I customize Workflow for Organizational Change (WS01000014)

    Hi ti all!
    Let me know please, How can I customize Workflow for Organizational Change (WS01000014)?
    What steps must I do?
    Thank!

    Oracle Workflow home page is basically static HTML content rendered by Mod PLSQL code written in WFA_HTML.HOME procedure. There is no supported way of customizing this page.
    Thanks

  • How can we change the assigned Family Organizer?

    How can we change the assigned Family Organizer?

    Hi J. Stephen G.,
    Great question! It is not possible to change the family organizer, however you can disband the group and restart it under a new organizer. For information on doing so, check out these resources:
    Leave Family Sharing - Apple Support
    http://support.apple.com/HT201081
    Family Sharing - Apple Support
    http://support.apple.com/HT201060
    - Matt M.

  • How to organize by date in mobil me? (It changes back to manual)

    How to organize by date in mobil me? (It changes back to manual)

    Thanks, Niel.
    Is there any way to sort the icons? I seem to recall there was a modifier key to hold while clicking the menu items but nothing works and I can't find anything searching "help".

  • How can i change the Creation Date of a video (mts-Format)?

    I work with Phohoshop Elements 13 an i use Online-Album (Revel)
    My Problem:
    I would like to change the Creation Date of a Video-File (mts-Format). I don't no why but the date (in Metadata) is wrong and i would like it to change. If i change it in Photoshop Elements the Date (Edit... Change Date...) it seems that the date has changed, but in reality in the Metadata is still the wrong date (see attachment).
    Why this ist important for me:
    The Adobe Revel (Online-Album) takes always the date from the metadata which is wrong.
    Any idea how i can resolve my Problem?
    How i can change the Metadata?

    Hi,
    Did you get help ? Or do you have a work around ? I have about 20.000 Pictures and countless videos to organize myself.
    I just ran into the same problem. Except that after a while Adobe will undo the changes I have made to the date.
    Here's a  screen shot I just made of one of the files.
    Look at this one ! This one is really interesting:
    After changing the date to : 1889 . Adobe changed it to 01.01.1970 00:59

  • How does one change ownership of event?

    How does one change ownership of an event?
    We are running OCS 9.0.4.2 on redhat enterprise linux 3.0
    I have a calendar entry which I got from:
    mySess.fetchEventsByRange(Api.CSDK_FLAG_STREAM_NOT_MIME | Api.CSDK_FLAG_FETCH_EXCLUDE_DAILYNOTES |
    Api.CSDK_FLAG_FETCH_EXCLUDE_DAYEVENTS, hand, in_start, in_end, eventProp, result);
    BEGIN:VEVENT
    UID:20050620T151524Z-505dd-1-7af6ed32-Oracle
    ORGANIZER;X-ORACLE-GUID=FEA199DDB9763627E030378E793341C1;CN=old owner:mailto:old.owner@email
    DTSTART:20050801T120000Z
    DTEND:20050801T220000Z
    END:VEVENT
    So now I'm trying to save the event under the new owner using this:
    mySess.storeEvents(Api.CSDK_FLAG_STORE_MODIFY,event,result);
    where event reads as follows:
    BEGIN:VCALENDAR
    VERSION:2.0
    PRODID:-//ORACLE//NONSGML CSDK 9.0.4.2//EN
    BEGIN:VEVENT
    UID:20050620T151524Z-505dd-1-7af6ed32-Oracle
    ORGANIZER;CN=new owner:mailto:new.owner@email
    DTSTART:20050805T120000Z
    DTEND:20050805T220000Z
    END:VEVENT
    END:VCALENDAR
    And i've run mySess.setIdentity to change to the old owner and new owner with no success?
    Please how does one change the owner of an event?

    The Calendar Sdk doesn't allow you to change the ownership of an event. (ORGANIZER value).
    Regards,
    Jean-Philippe

  • When I receive and answer e-mail, the correspondence is usually "nested" with the original message, and the number of replies, etc. are indicated with a number next to the original message.  How can I change the mail settings so that every reply is listed

    When I receive and answer e-mail, the correspondence is usually "nested" "behind"  the original message, and the number of replies, etc. are indicated with a number next to the original message in the inbox.  How can I change the mail settings so that every reply is listed individually in the inbox instead of having them "stacked" behind the original message.  I'm afraid I might accidentially overlook messages the way they are handled now.

    Somebody here will correct me if I'm wrong, but what you have to do is go into Settings, Mail/Contacts/Calendars and under Mail, turn off "Organize by Thread".  I think that will make each message show individually.

  • Newbie stuck - how do I change the file type of a photo I am formatting from a TIFF to a JPG?

    I am new to Aperture and struggling to figure out some of the basics, even with the tutorials.  I need to submit a photo for an art competition - the master is a TIFF and I need a JPG under 1.8 MB - how do I change the new version's file type and keep it with the master?
    Thank you in advance.

    I can't recommend the method proposed by Carolyn Samit; in fact, I recommend ignoring it.
    Aperture is large, complex, and can take some time to learn to use.  It is also quite powerful, and can handle nearly all -- or all -- common tasks you throw at it.
    I have written a very short guide to Aperture which was intended to provide some firm footing for those getting started.  I humbly suggest that you start with a quick review.
    One of the things that presents a bit of disorientation for new users is that, in practice, Aperture keeps your pictures in a kind of limbo.  There are good reasons for this -- suffice it for now to accept that you import image-format digital files into Aperture, you use Aperture to organize and optimize these as Images, and then when need a file to use outside of Aperture, you export you Image.  It is at export that you format your Image: you select the file type, the compression amount, the file name, the file size, and more.
    In your case, then, you will export your Version, and set the file type to TIFF (recommended above JGP whenever quality is paramount). There is no way to know the file size in bytes prior to creating it.  Start with a full-size TIFF and, if necessary, knock it down by percentage until the exported file is less than 1.8 MB.
    There is no reason to attempt to keep this file with the Image in Aperture.  Send it on its way.  Any time you need another file from your Image, you can create it fresh via "File→Export→Version".
    HTH.  If it doesn't, ask more. 
    Message was edited by: Kirby Krieger -- expanded a bit.

  • How to organize apps into folders and make them stick in iphone 3gs?

    Four hours down the drain! Darn, I decided to finally learn how to organize my apps into folders and do it right. Instead I spent four hours and must have got it wrong.
    I opened iTunes on my MacBook with my iPhone attached. Then clicked on the iPhone in the left side list of my iTunes. Then clicked on apps which brought up a nice page with all my iPhone apps listed in one window on the left and all the pages of the apps that are on my iPhone in the window on the right. So far this is what I think the User Manual and Help said to do.
    At that point I created new folders by dragging one app over another. For example, I would find a photography app and drag it onto another photography app. That automatically created a folder with the name photography. Just what I wanted. I then looked for more photography apps and dragged them to the folder.
    This is not too easy because I had eight pages of apps. At first, I would grab an app on a page and drag it to where I knew the corresponding folder would be and put it into the folder.
    Later I found another way was to use the list of my apps on the right to put them in apps.
    In the end, from what appeared on the screen, it seemed to me that most of my apps were in folders and the folders were either on page one, two, or three. At that point I thought that I should sync the MacBook with the iPhone, I believe, and did so.
    When the sync was finished I took the iPhone off the computer and looked at it. NONE of the folders I created, nor the organization into folders of the apps were on my iPhone!
    Obviously, I did something wrong since the same mess was on the iPhone as before, with apps all over the place and impossible to locate without taking too much time. This after four hours of work looking at a 13 in. laptop screen!
    What I hope is that someone smarter than me will look at what I did and tell me where I went wrong.
    I want the apps on the iPhone to be organized into logical folders so it is easier to find them. Something along the lines of a good database, you know?
    Thank you for reading to the end of this question,

    OK, I spent another afternoon doing the job started yesterday. Last night (could not sleep, so might as well think) I got to thinking that I really must have missed a step or something because all my work was done on the Mac and I did not recall any time when I transferred the new setup with folders to the iPhone.
    Sure enough, when I tried it today I did find that missing step. When looking at the Home Page of the iPhone or any page being worked on, in the lower right hand corner two buttons say
    SYNC APPLY
    I do not recall using the APPLY button on the first day trying this, but I used it this time.
    After making changes, I hit APPLY and the computer began to sync with the iPhone.
    This time, although there is nothing telling the user what is going on, the sync actually makes the iPhone pages to look exactly like the pages created on the Mac.
    Too bad the instructions and help did not say to do things in this way, which is the only correct way, as far as I can tell.
    I have about 155 apps on the iPhone, making the job extra lengthy. However, I never could do it on the iPhone’s tiny screen, even though it is possible, so this was good - working on the larger screen of the MacBook.
    There are also some (undocumented?) tricks in using the MacBook for this task. For example, it is possible to create a folder and then, using the list of all apps on the iPhone that is on the left side of screen, open the folder, click on the check box next to any app you want to put in the folder and it will jump right in!
    If the check box already has a check mark, just click the box to remove it, click again to put the check mark in the box and voila the app takes off for the folder. This also works to just put apps onto a certain page, if you want to do that, but dragging apps around sometimes works better.
    I hope it will not be necessary to do this again because of the time involved, and he need for quite a bit of thinking on how to move the apps and folders around to get everything just where you want it on the iPhone. The work reminded me of an old kids game that has a small square case with, I guess eleven movable numbers, that are all mixed up, and one space that is not filled with a number. You can move the little squares with the numbers around inside the case to try to line the numbers up in order from 1-11 and do it faster than anybody else.
    Well, unfortunately lining up all my apps was like that because each page of the iPhone only holds 16 folders or apps and each folder is limited to 12 apps. Starting with 155 apps it takes too much mouse maneuvering to make the process easy.
    Finally, the automatic folder names are very broad, as in MUSIC, LIFESTYLE, SPORTS and such, so I often just deleted the given categories and put my in my own. Also, some day I may break down the folders more because twelve apps in one folder means the apps are still pretty much out of view.
    I wrote this in case anyone else finds it and has the same irksome product. If I just reinvented the wheel, please do not tell me now.

  • How do i change date format in mac mail?

    how do i change the date format in mac mail?

    I just had this problem and I already was using "classic layout".
    I went back to mac mail and at the top, it says, MAIL, FILE, EDIT, VIEW (etc). In VIEW, in the drop down, one of the options is ORGANIZE BY CONVERSATION ..I saw that mine was CHECKED.
    I unchecked it and now all the emails are fine again, showing one by one, as opposed to all my emails from one client getting lumped together.

  • How to organize Mail folders?

    Hello,
    I am having a heck of a time trying to figure out how to do something in Mac Mail (I'm on Mountain Lion with a MacBook Pro with Retina Display).
    In the past (pre-Mountain Lion), I had individual folders for each of my mail accounts. For example, I had a folder for Comcast mail, Gmail, Hotmail, iCloud, and Yahoo. In the left-hand column of the main Mail window, it was nicely organized so that there was the "main" folder for a particular email service, and then underneath that folder there would be other folders such as Sent, Trash, etc.
    However, the way it appears now is that there is one single "Inbox", and underneath that Inbox are MORE Inboxes, with each one being a different mail service. For example, under my Inbox, the next thing down is "POP Account", then "GMail", then iCloud". But they ALL fall under the main heading of "Inbox".
    I really don't care for it to be set up this way. I much prefer having a dedicated Inbox for each mail service, and then the various folders that relate only to that service underneath.
    I hope I'm describing this correctly. For years, it was set up the way that I liked it. I'm not sure when it self-changed to the way it is now, but I really don't care for it. I've gone through all of the menus and I can not figure out how to get it back to the way it was.
    Any assistance would be greatly appreciated. Thank you!

    The “On My Mac” folder has never existed as such, neither in Mail 1.x nor in Mail 2.x. Mail uses that term to differentiate custom mailboxes stored locally on your computer from mailboxes stored on the server of IMAP accounts.
    In Mail 1.x such mailboxes appeared in the mailbox list grouped under an “On My Mac” icon, whether that’s how you wanted them to appear or not. In Mail 2.x, this changed to offer greater flexibility in how the user wants his/her custom mailboxes to be organized — see Mail Help’s “My mailbox organization was lost after upgrading Mac OS X” article. This allows the user to have multiple top-level “On My Mac” hierarchies, or name the group differently, or have custom mailboxes appear directly at the top level of the mailbox list for greater convenience, etc.
    To answer your question, no, you aren’t stuck with how Mail organizes custom mailboxes, but as you have found out, Mail has some bugs & glitches when it comes to reorganizing mailboxes, and you should make a back up of at least your ~/Library/Mail/ folder before start making changes, just in case.
    I sometimes reorganize my own custom mailboxes by renaming and/or moving them, and have never experienced any issues myself, so you should certainly be able to do things like that. There are only two things I recommend not doing in Mail when reorganizing mailboxes:
    1. Even though Mail allows it, don’t use a folder as both a mailbox (i.e. to store messages of its own) and as a parent folder for other folders.
    2. Never, ever, rename a folder just to change its capitalization. If you want to change from uppercase to lowercase or vice versa, rename the folder to something different first.
    A more thorough discussion of these issues, for those who might be interested, can be found in the following thread, for example:
    Mail - lost mail - driving me mad

  • All photos in portrait format are displayed blurred in the preview mode "fill" of the library. In all other modes e.g. "fit"or "1:2" the photos are sharp. How can I change this, so that the photos are still sharp when displaying them in the mode "fill"?

    All photos in portrait format are displayed blurred in the preview mode "fill" of the library. In all other modes e.g. "fit"or "1:2" the photos are sharp. How can I change this, so that the photos are still sharp when displaying them in the mode "fill"? My Lightroom release is 5.7.1.
    Thanking you in anticipation!

    I'd like to get all these '-1 suffix' files together with their associated Develop adjustments into one folder (if they aren't already) so I can see them in Grid view in the Library module, which I use as my basic starting point for everything else at this early stage of my Lightroom 'career'.
    To see what folder these are stored in, right-click on a photo and select "Go to Folder in Library".
    Advice: if you are going to use Lightroom effectively, you probably want to stop using folders as your method to create a grouping of photos that are already in Lightroom; there are plenty of built-in tools, such as keywords, collections, color labels, etc.
    I don't understand why the search on the entire catalog picked up apparently the same two file versions but also got the Develop adjustments when going to the relevant Folder didn't show the adjustment black squares against each image in Grid view nor were they there when the images were opened in the Develop module.  Perhaps if I understood this, I'd be a bit more confident of moving forward myself.
    These are most likely different versions of the same photo, in different folders. Lightroom stores the edits in its own catalog, and so it knows that one folder's photos have edits, and the other folder's photos do not have edits. Please understand that Lightroom is a database, it knows where the photos are at the time you import them (or add them to the catalog by synchronize), and then if you move things around in your operating system, Lightroom does not know anything about that and problems begin. Thus the advice to organize using Lightroom tools and methods and not operating system tools and methods.

  • How to organize in iPhoto 6???

    I need help organizing my pictures in iPhoto 6... When I need to send a picture or just browse in my directory of pictures I have to take a guess in which folder the picture i'm looking for is in. For example I have a "Modified" and "Originals" folder, then I have to open another folder for the year like "2005" or "2006" and after that there is the major problem : I have folder names like "Roll 1", "Roll 16", "Roll 32".... it takes too long to find a picture..
    Can somebody tell me tips and tricks on how to organize my pics so that I can find them easily while browsing my pictures folder???
    Thanks,
    cotjoey

    Hi cotjoey,
    First, you can always select the photo/photos within iPhoto and File>export them to the desktop, where you can then navigate to the desktop or folder on the desktop to upload or send the photos.
    Second, you can do some renaming of rolls within iPhoto.
    iPhoto 6 Library folder in the Finder
    As you can see the structure is now related to rolls. Rolls are created for each folder you import and each import session from a camera.
    It is very easy to change the names of film rolls within iPhoto to make them easier to find images within. Open the info panel in iPhoto by clicking on the "i" icon. Once it is opened, click on the roll title in the viewing window.
    Click on the word "title" in the info pane and type in your new title. I like to use a date and text format such as 12/25/05 Christmas at Mom's, 1/05/06 my birthday, etc. Once the roll names are changed within iPhoto, they are also changed within the Finder, making it easy to locate an image.
    When importing from a camera, make sure you name the roll with a date and text before the import.

Maybe you are looking for