How to output a TTL signal from a sine wave [Please Help]?

Hi evryone!
I am a bit lost...
We make the acquisition of voltage (sine wave, 3Hz) which I simulated by a waveform generation in my VI. We want to convert this analog signal to a TTL and output it with a multifunction DAQ (6230).
I only used Analog to Digital.vi and DAQmx write.vi and I can't get it to work... I get a TTL which is not 3Hz and only If I input a frequency like 3.07 and not 3.00 !!
Did I forget something ?
Thanks for helping
Christophe
Attachments:
ADC.vi ‏26 KB

In your vi, you don't have DAQmx Timing setup. I don't know what the default value is. But the timing determines how fast the DAQ will output values. If not set correctly, you may see slight change in the output frequency. Another thing is that the timing is based on a master clock, like 50MHz. The clock gets divided down until it gets near the desired setting. So it may not be able to achieve 3KHz exactly. If you are getting 3.07KHz, this may be why. I don't know if there is anything you can do about it. Try using the timing vi and setting different sample rates.
- tbob
Inventor of the WORM Global

Similar Messages

How to block stolen ipod touch from a distance? please help

Hi,
My whole handbag was stolen today in a store, inside was my purse, smart-phone and my Ipod touch.
What can I do to block my ipod from a distance.
If I can't have it back, they don't deserve to get it for free.
Please help.
Thanks,
Heidi

- There is no way to prevent someone from restoring the iPod for their own use or to sell it.
If you has already turned on the FIndMyiPod feature and wifi is on and connected you may be able to locate and wipe it. Go to iCloud, sign in and go to findMyPhone. If the iPod i restored the find feature is deleted.
- Apple will not help with anything
Report to police and the store and change the passwords for all accounts used on the iPod

How to set password for photos from home screen? Please help.

Hi,
Can anyone pls help to set password for my Iphone 4s.
My friends/family often use my phone for gaming purpose. I don't want them to see my photos/gallery/videos.
How can I protect my personal things from others?
Thnx.
Rgds.

There is no way to set a password for photos. You could upload all of your photos to something like DropBox, then sign out of the app. Or, you could only let people you trust to respect your privacy touch your phone.

TTL signals from motor outputs

I'm currently using a stepper motor with a MID-7604 drive and a PCI-7344 controller. I would like to output TTL signals from the drive at certain motor positions, but do not have an encoder (which is required for breakpoint signals). Is it possible to `construct' a TTL type signal using the low-level motion functions in LabView, and then output them through a motor axis that is not currently being used?

Hello,
Depending on the type of output that you want to generate (single pulse or pulse train) you could use the Digital IO port of the motion controller with the Set IO Port MOMO.flx function to toggle DIO lines or you could use the Configure PWM Output.flx function to generate a pulse train. The downside is that this will be software timed based on the current position as determined by the controller.
There is not any way to manually modify the motion control signals that are generated by the controller. That is all handled by the FPGA of the controller.
Regards,
Scott R.
Applications Engineer
National Instruments

How can I tell if signals from two devices are truly synchronised?

Hi there,
How does one check that signals from two devices (two separate devices in a single X-series chassis) that should be synchronised actually are? I am using a PXIe6361 and PXIe4331 on a PXIe-1073, with Labview 2001 SP1 64-bit. All devices are using the Sample Clock from the 4331 device, and an AI Start Trigger, so they should be synchronised.
I thought that writing the signal data to file and checking the time stamp for each column of data would be the most accurate, but I have been told that timestamps are software created and therefore don't reflect the actual time that the signals were acquired by the hardware. When I do this, the timestamps vary by up to 150ms which is larger than I expected.
If I set the x-axis of the waveform graphs (on the GUI) to "Time" then it appears that the first data sample is taken at different times for the two plots (one plot per device).
If I set the x-axis of the waveform graphs (on the GUI) to "Ignore time stamp" (so that the x-axis just starts from 0 rather than a date-time) then the first data point occurs at "0" for both graphs. However, I'm not sure that this reflects the actual alignment of the signal.
What is the best way to check if signals collected on different devices in the same chassis are actually synchronised?
Thanks,
Claire.

Hi Lynn,
Thanks for your help and for sending the demo.
I understand the concept of how the signals will look if they're not synchronised and your demo shows that nicely. I guess I have been perplexed by someone else telling me that the timestamps in the output file (and following from that I assume timestamps on a waveform graph) do not give an indication of whether signals are synchronised. The reason they gave for this was that the timestamps are manufactured by the software, not the DAQ hardware. They suggested that I put the setting "ignore waveform timestamps" on my waveform graphs, and then check that both signals come in at the same time (i.e. both start at zero), but I'm not convinced about this.
When I use an analog trigger, neither the timestamps in my output file or on the two waveform graphs are synchronised. If I don't use the trigger, then there is far less disparity in the timestamps in the output file. I've attached two output files here, and my VI.
This is my first attempt to synchronise a voltage module and a strain gauge module on an X-series chassis, so I want to make sure that I'm achieving the best synchronisation that I can, and the difference in behaviour with and without the trigger worries me.
Thanks,
Claire.
Attachments:
without trigger.txt ‏5 KB
with trigger.txt ‏6 KB
Multi-Device Synch-Analog Input-Finite Acq-Analog Start_Claire_wDigitalin_12June2012 PTbridge.vi ‏196 KB

How do create an analog signal from a text or binary file?

I'm trying to output an analog signal from a file on an NI-DAQ 6251 card using labview 8.5. I've found the examples on building a waveform, but I'm stuck at how to read a text file and make a 1-D array to input my amplitudes into the buildwaveform.vi and I can't find any information on how to do so. Any help or direction is greatly appreciated.
thanks,
David
Solved!
Go to Solution.

If all that you want in the file is the Y values, then a text file with a value on each line could be read. The Read From Spreadsheet File can be used. It will return a 2D that you can then use the index array function to get a column or if you select Transpose, the returned 1D array would be used.
If you want to create an example, use a 1D array constant in a VI and pass it to the Write to Spreadsheet File.

I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...

I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...

Has your carrier been having issues with Call Display? Do the telephone numbers come up when people call, or does it just show 'Unknown Number' or 'Blocked' ?

My AppStore id is my apple id n password which is good when purchasing. But when I am updating from update option it ask for a password. The user id I see there is not mine, it's different. How do I change that to my apple Id? Please help me resolve .....

My AppStore id is my apple id n password which is good when purchasing. But when I am updating from update option it ask for a password. The user id I see there is not mine, it's different. How do I change that to my apple Id? Please help me resolve this issue. I have tried resetting it but nothing... Either I'm doing something wrong or....

I believe the issue is with the Apple ID that was used to purchase the App. If you download an App that was purchased under a different Appple ID then all updates will also be linked to the original purchaser's Apple ID. Your Apple ID is the the same ID as your iTunes, iCloud, etc. Some folks use different ID for the different Apple sites. No need for that One ID for all Apple Sites, and if someone else buys an App using their ID and they(you) download that App onto your device and that App requires an update it will ask for the purchasers Apple ID. This happens a lot when folks sell their iPad or give it to someone else and leave some purchased(free) Apps on the iOS device. You cannot change the original ID the App was purchased under. A suggestion would be if someone else has an App that you like but do not want to pay for use their ID or in the future have them gift the App to you.

Hello there. i lost my Ipad and i need to log out all email and facebook. Also is there any chance get my diary somehow. how can i log out from my Ipad? please help, i have very important information and other stuff in my Ipad?

I need help to log out from my stolen Ipad. please help.

If you had installed iOS 7 it would be Activation locked, but I see you only have iOS 5. You do have a backup of you iPad files on your computer or iCloud, don't you?
If the iPad was running iOS 7, the thief/finder will not ever be able to use it.
iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
Apple (and no one else) can not assist (with serial number or iCloud) in finding a lost or stolen iPad.
Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
What to do if your iOS device is lost or stolen
http://support.apple.com/kb/HT5668
How to Find a Missing iPad with FindMyiPad
http://www.dummies.com/how-to/content/how-to-find-a-missing-ipad-with-findmyipad .html
iCloud: Locate your device on a map
http://support.apple.com/kb/PH2698
iCloud: Lost Mode - Lock and Trace
http://support.apple.com/kb/PH2700
iCloud: Remotely Erase your device
http://support.apple.com/kb/PH2701
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
General steps to follow for a Stolen iPad
http://stolen-ipad.com/
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
What NOT to do if your iPhone or iPad is lost or stolen
http://www.tomahaiku.com/what-not-to-do-if-your-iphone-or-ipad-lost-or-stolen/
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st Len
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
http://support.apple.com/kb/HT4061
Check the serial number (located on back/bottom) in this lost/stolen iPad database. However, most owners are not aware of this database and don’t enter the serial number.
Stolen iPad Database
http://www.stolenlostfound.org/online-stolen-ipad-database
Also do a search, using the serial number, on your local Craig’s List. Some users list the serial number of a stolen iPad to thwart the sale of a stolen device.
 Cheers, Tom

Unable to update software or upload pics from SD card-how do I remove files from startup disk? Please help!

Unable to update software or upload pics from SD card-how do I remove files from startup disk? Please help!

Hello Smile_333
The article below will assist with finding things and help increase the hard drive space for your computer. The best way is to have an external hard drive to copy things to if you do not want to delete and loose things.
OS X Mountain Lion: Increase disk space
http://support.apple.com/kb/PH10677
Thanks for using Apple Support Communities.
Regards,
-Norm G.

My iphone 5 was recently stolen. I had the service shut off, but I don't know how to remotely wipe out my data from my phone! Please help!!

My iphone 5 was recently stolen. I had the service shut off, but I don't know how to remotely wipe out my data from my phone! Please help!!

YOu can only do that if you had find my iphone setup and activated prior to having your phone stolen.
Then you log into icloud.com to remote wipe, but your phone has to be connect to wifi or cellular data to do that.

Hi please help me , how can i set my ringing tone on my iPhone from my playlist. I wanna set some normal music from my floder not some ringing tones from iPhone origin . Please help me . Thank you :)

Hi please help me , how can i set my ringing tone on my iPhone from my playlist. I wanna set some normal music from my floder not some ringing tones from iPhone origin . Please help me . Thank you

You need to make your own ringtones in iTunes then sync them to your phone. Follow the directions here:
http://osxdaily.com/2010/09/04/make-free-iphone-ringtones-in-itunes-10/

Hey i have a iphone 4s 64gb but and using the internet share .. how can i change the nat type from strict to open please help me :)

hey i have a iphone 4s 64gb but and using the internet share .. how can i change the nat type from strict to open please help me

You will have to configure that with your router. Type your router's IP address in the search/domain bar and allow port forwarding.
What is requiring you to have an open NAT? That issue is usually for gaming consoles, etc.

I have had a reinstall nightmare getting my loops back they are in the apple library, I can access them through the media browser but I only have a few available through the loop browser, how do I get them all back there again? please help

I have had a reinstall nightmare getting my loops back they are in the apple library, I can access them through the media browser but I only have a few available through the loop browser, how do I get them all back there again? please help

"Where do I find my hundreds of dollars of downloads I have done since 2005?"
They will only be where you put them If you are doing the very basics, then they will be on your computer and they will be in your backup copy of your computer.
The itunes store is not global at all, never has been. You cannot redownload your content from another country. You can only use the countrys itunes store for the country that you are physically located.

I accidentally synced my mum's brand new iPad to my mac book air. A few days later I realised that my iTune library on my mac is completely gone. So is my iPhone 4s after I synced it with my mac. How do I get my old iTunes library back? Please help!

I accidentally synced my mum's brand new iPad to my mac book air. A few days later I realised that my iTune library on my mac is completely gone. So is my iPhone 4s after I synced it with my mac. How do I get my old iTunes library back? I tried using icloud on my iphone but it stated that I have never back up my phone before. So I guess my iCloud data is gone too? But I have back up my mac in my harddrive using time machine. So how do I get my old itune library back? Please help! Thanks!

1) ensure iTunes is authorized for your iTunes store account(s)
2) connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
3) sync the device
iTunes will wipe the iPhone but, since you transferred your purchases in the previous step, your content will be in your library and you can re-populate the iPhone with it.
above works for purchases from the iTunes store. for everything else, check out this post by Zevoneer.

How to output a TTL signal from a sine wave [Please Help]?

Similar Messages

Maybe you are looking for