How to output contents as they're processed

This is probably a very simple question, but I'm just
wondering how to output the items on a page as they're processed,
instead of having to wait for the processing for the entire page to
be done before displaying anything. Does this make sense?
Thanks!

Similar Messages

How to send the output of the 1st BPEL process as a input to 2nd BPEL Proce

Hi,
I am working on OBPM 11G and my requirement is like below,
From Mediator we need to call two different BPEL process. 1st one is Synchronous one and second one will be a one way interface. We need to call a java call out from Mediator and then give the output to the first BPEL process. The output from the first BPEL process has to be given to the second BPEL process with a filter condition.
However we have achieved to call Java callout as well as call to two different BPEL process but facing issues in sending the output of the first BPEL process as a part of input to the second BPEL process.
Any help on this would be appreciated.
Bibhu

Hi,
Why do you need the third step, if the second step is a Numeric Limit Test step type, you can setup the limits of this step for your required limits of 11V and 12V. Your result is returned from your VI to Step.Results.Numeric which will be evaluated in the Status Expression giving you a Pass / Fail status.
Look at the example TestStand\examples\demo\..\Computer Motherboard Test\computer.seq
But to answer your reoriginal question, some additional information is required.
What are your inputs and outputs assigned to in TestStand, do you use the Step properties, Locals, FileGlobals?
Regards
Ray Farmer
Regards
Ray Farmer

How to Map Fomulas for Float Glass Process

Hi All,
Can anybody suggest how to map formulas for float glass process.
As in float Glass process continuous production is going on single line, within that continuous ingredients are added in furnace and molten glass mass is coming out. this molten glass is now adjusted to particular thickness and then finally cut into specific sizes as per cusotmer requirment.
Final product is in various thickness, width and length.
Entire process is automated.
If anybody already implemented same scenario, please share knowledge.

Hi
The following is the mapping process and it is tricky process need to map carefully.
You can define this as a single formula.
Output: Packed - cut to size - Finished Good Item.
Input: All the Raw materials (Sand, Dolamite, Limestone, Soda Ash, Sodium Sulphate, Carbon, Iron Oxide)
Packaging materials + Labels + Boxes etc.
Define Routing:
Resource: Furnace, Any other importance resource like Equipment that controls thickness, cutter etc, Labor, Associated Overhead
Create recipe using the formula and routing.
Various factors that can affect the mapping:
1) Formula maintenance: You have to define formula for each output item.
2) Possibility of dynamic determination of output item: If it is possible to produce different combination of thickness/width (and hence different FG item) in the same batch, then this won't be the right mapping.
3) Process variations: Also formula mapping depends on how accurate is production process. If user wants to produce item X (say thickness 10mm) but due to quality issue produced item Y (say thickness 9mm) and such cases happens very often, this won't be right solution.
4) Inventory measurement: This will determine the break-points. If you cannot measure the quantity (or even estimate) then you cannot define it as an intermediate item.
I will explain how point 4 can lead to different way of formula mapping.
Say you have a furnace that needs to run continuously for better quality or throughput. Hence you will be continuously adding raw materials to furnace and produce different outputs. You can break the single formula into multiple formulas as -
Formula 1) Output: Molten mass of glass
Input: All the Raw materials (Sand, Dolamite, Limestone, Soda Ash, Sodium Sulphate, Carbon, Iron Oxide)
Formula 2) Output: Packed - cut to size - Finished Good Item.
Input: Molten mass of glass
To have formula in such fashion you should have a way to measure or estimate the weight of Molten mass of glass.
If you are estimating the weight, there should be historical data available to determine what should be realistic output quantity for given input quantity. How much will be process loss and loss due to unwanted by product such as slag etc.
Further you can break formula 2 as
Output: One large sheet of give thickness
Input: Molten mass of glass
Output: Packed - cut to size - Finished Good Item.
Input: The large sheet of give thickness.
This kind of different mapping is possible which normally depends on:
1) Complexity of process
2) How complex BOM structure user wants to have
3) Are there any benefits of maintaining such complex system - like accurate costing or accurate production monitoring or facilitating planning process.
4) Can user maintain the complex system? Are they ready to capture data at finer level. Is it possible to capture the data.
5) And most important thing is how to handle exceptions. If every thing goes smoothly as planned (less exceptions) then user can have and afford any level of complexity. But if there are many exceptions to the normal process you have to concentrate more on how to handle the exceptions.
6) Satisfy all users: Accounting, Planning, Production, Quality, Inventory handling. Formula/Recipe touches all these modules.
Regards
Raj
Sierra

How to output sound to RCA cables?

I give up! I can't for the life of me figure out how to output the sound from my Macbook to play on my stereo or TV which use RCA cable hook-ups.
I got the VID ADPT MINI-DVI TO VIDEO ADAPTER-GEN but that only adapts the video, not the sound. Do I have to get some kind of optical to analog adapter?

This would do the trick, although you can probably find something at Radio Shack for less.
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=FFB 21895&fnode=home/shopipod/ipod_accessories/cablesdocks&nplm=TN779LL/A
I got an iPod kit with a power supply, extra dock, and a Monster Cable (yeah I think they're overhyped) mini jack to RCA connector.
There are a bunch of ways you can do this. If you've already got long enough RCA cables, these would do the trick:
http://www.radioshack.com/product/index.jsp?productId=2103710
Or if you have a short distance, maybe something like this (doesn't say how long it is):
http://www.radioshack.com/product/index.jsp?productId=2427991
There are more attractive versions of this type of adapter. Radio Shack shows at least a dozen from different companies.

Error message by periodic weekly: No output from the 1 file processed

Hi there,
since four weeks, I got a problem with the maintenance script periodic weekly. Up to December 22nd, the script did, what it should do: rebuilding the database of locate and whatis, rotating log-files. Since one week later, I got the error message: No output from the 1 file processed.
Normally, I use Anacron to do the job. When I noticed the problem, I tried to start the script with Tinker Tool System getting the same result. Another try using the Terminal (sudo periodic weekly) also failed. The commands locate and whatis are working, locate.updatedb and makewhatis also. I'm running 10.4.8; in the past, I did not have such problems. Anyone with an idea or solution?
Thanks
Klaus
MacBook Pro Mac OS X (10.4.8)

Hi Gary,
here is the output you were asking for:
Last login: Thu Jan 25 20:03:55 on console
Welcome to Darwin!
DeepThought:~ dirk$ sudo /private/etc/periodic/weekly/500.weekly; echo $?
Password:
Sorry, try again.
Password:
Rebuilding locate database:
Rebuilding whatis database:
find: /usr/local/man: No such file or directory
makewhatis: /usr/share/man/man1/fetchmailconf.1.gz: No such file or directory
Rotating log files: ftp.log lpr.log mail.log netinfo.log ipfw.log ppp.log secure.log
access_log error_log
Running weekly.local:
Rotating psync log files:/etc/weekly.local: line 17: syntax error near unexpected token `)'
/etc/weekly.local: line 17: `if [ -f /var/run/syslog.pid ]; then kill -HUP 0 80 79 81 0cat /var/run/syslog.pid | head -1); fi'
2
DeepThought:~ dirk$ ls -loe /private/etc/periodic/weekly/500.weekly
-r-xr-xr-x 1 root wheel - 2532 Jan 13 2006 /private/etc/periodic/weekly/500.weekly
DeepThought:~ dirk$
It seems, Rogers idea, PsynX respectively the deficient uninstalling by me is responsible for my problems, is correct. Should I remove the whole file weekly.local or should I only remove the content? I prefer removing the whole file, because it was created while installing PsyncX. The date of creation is the same as the date of installing the app (December 25).
Klaus
By the way: it seems to me, the solution of my problem is in sight. So I want to thank you all for the amazing aid I got from you!

How to find content of a constraint etc.

Hi,
select constraint_name
from user_constraints
where table_name = 'EMP';
shows to two constraints for the given table of EMP. Now, how to find CONTENT of each of these two constraints?
Secondly, how to find if a particular column is nullable (programmatically, not from DBA tool set)? e.g. EMP.deptno
Thirdly, why did I get the err msg of "inserted value too large for column"
when executing the following command for data insertion to EMP as user, scott
create SEQUENCE emp_sequence
start with 8000 increment by 10;
insert into EMP values (emp_sequence.NEXTVAL,'JOE','Researcher',null,null,null,null,null);
Thanks a bunch.

Thirdly, why did I get the err msg of "inserted value too large for column"Er, do the math...
SQL> conn scott/tiger
Connected.
SQL> desc emp
Name                                      Null?    Type
EMPNO                                     NOT NULL NUMBER(4)
ENAME                                              VARCHAR2(10)
JOB                                                VARCHAR2(9)
MGR                                                NUMBER(4)
HIREDATE                                           DATE
SAL                                                NUMBER(7,2)
COMM                                               NUMBER(7,2)
DEPTNO                                             NUMBER(2)
SQL> select length('researcher') from dual
2 /
LENGTH('RESEARCHER')
                  10
SQL>
Secondly, how to find if a particular column is nullable (programmatically, not from DBA tool set)Don't like the sound of this, smells of dynamic coding. Anybody who can't figure out why they can't create an EMP record for a researcher probably ought not to be tangling with dynamic SQL just yet.
Now, how to find CONTENT of each of these two constraints?The CONSTRAINT_TYPE tells you the sort of constraint: P=PRIMARY KEY, U=UNIQUE, R=FOREIGN KEY and C=CHECK. Only Check constraints have any content as such and you'll find that in the SEARCH_CONDITION. Note that this is a LONG column, so you may need need to SET LONG 5000 to see it in SQL*Plus.
Cheers, APC
P.S. In future please refrain from bundling unrelated questions into a single post. There is no charge for posting and it avoids the threads getting long and hard to follow.

Converting Smartforms output content into HTML File

Hi,
I have a requirement, Smartforms output contents needs be converted as HTML File and it should be sent as email.
I am able to get the Smartforms output in html format but the output is shown as binary format.
After the fm call the job_output_info parameter is holding the smartforms output content in
job_output_info-XMLOUTPUT[]           (xsf content)
job_output_info-XMLOUTPUT-STSHEET[]   (css content)
job_output_info-XMLOUTPUT-TRFRESULT[] (html content)
Help me out how to handle the job_output_info details to html format.
Code
DATA v_fm_name TYPE rs38l_fnam.
DATA v_tdsfname TYPE tdsfname VALUE 'ZVR39_SF'.
DATA output_options TYPE ssfcompop.
DATA job_output_info TYPE ssfcrescl.
DATA document_output_info TYPE ssfcrespd.
DATA job_output_options TYPE ssfcresop.
DATA w_control TYPE ssfctrlop.
*-Finding the Smartform Layout Name
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
    formname           = v_tdsfname
IMPORTING
    fm_name            = v_fm_name
EXCEPTIONS
    no_form            = 1
    no_function_module = 2
    OTHERS             = 3.
*-Defining the output to HTML Format
*-Activating XSF Output
output_options-xdfcmode   = 'X'.
output_options-xdf        = space.
output_options-xsfcmode   = 'X'.
output_options-xsf        = 'X'.
output_options-xsfoutmode = 'A'. "
output_options-xsfoutdev = 'P863'.
output_options-xsfformat = 'X'.
*-Calling the Smartform Layout
CALL FUNCTION v_fm_name
EXPORTING
    output_options       = output_options
    user_settings        = 'X'
IMPORTING
    document_output_info = document_output_info
    job_output_info      = job_output_info
    job_output_options   = job_output_options
EXCEPTIONS
    formatting_error     = 1
    internal_error       = 2
    send_error           = 3
    user_canceled        = 4
    OTHERS               = 5.
Giri

Hi,
Check this link.In that,I am converting the output of smartform to PDF and then attaching it through mail.
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap code samples/smartforms/smartform in abap.pdf

How to output data when converting labview vi into matlab mex functions

Hi,
I am a fairly new user to labview and am currently working on labview
7.1. I have created a labview vi which can extract data from ni daq
6070e in real time. The problem is that this code has to be converted
so that it can be used with matlab.in order to do that i am using math
interactive tool kit which converts the labview code into mex files
which can then be used in matlab. Unfortunately i have not been able to
figure out how to output this data so that it can be processed in
matlab easily. i cannot afford any loss of information and all the
output must happen in real time. the o/p must take place after the fft
has been done. i am attaching the vi for convenience.There are 10
broken wires ,and this is the place where i want the o/p to be
generated.
Also do let me know if this vi can be further improved.
Regards
Attachments:
RT_loop2ver4_working.zip ‏642 KB

Manuj,
You seem to have misunderstood the way in which LabVIEW processes data. The code that you have produced will run in exactly the same way without the need for the case structure.
The code does not actually run the data from the previous case. It is merely processing data from the previous loop iteration, regardless of the case. If you were to remove the case structure, leaving only one copy of the code intact, and remove the toggle switch you have produced, or used the shift register which, I assure you would have worked, then you will have exactly the same functionality.
I have attached an example that uses the shift register to toggle cases, but also iterates that the case structure is not needed by using the same feedback node (and code) without a toggle switch or case structure.
Hope this helps you optimize your code
Regards
AdamB
Applications Engineer
National Instruments UK
Applications Engineering Team Leader | National Instruments | UK & Ireland
Attachments:
CASE_NO-CASE_Example.vi ‏24 KB

How to output sample and convert clocks to PFI lines of E-Series DAQ (DAQPad-6015)

Hi,
Can someone tell me how to output sample and convert clocks to PFI lines of E-Series DAQ (DAQPad-6015)?
Thank you very much.
Jack

John --
Windows is not an option for me. I like your idea of using a counter output -- it may be helpful as I am getting ramped up, but my application will eventually require both timer outputs.
I have a legacy C application written for Macintosh, and I am in the process of moving it onto OS X. So my options are to use DAQmx Base, or write an in-kernel driver. I actually have already done the latter for 6024/6025 E-series boards (for another company); for this client I was hoping to use the DAQmx Base to allow an easy transition to M-series boards, without the cost of writing and supporting a low-level driver.
The specific task I am doing is relatively straightforward. I record 2 channels of AI for a short period (usually about 250 ms.) and during this time I drive 2 external digital signals. Right now, I use the 2 timer outputs, which allows precise synchronization with the output and AI sampling.
I appreciate your comments, and thanks in advance for any additional suggestions you can lob my way.
--spg
Scott Gillespie
Applied Brain, Inc.
scott gillespie
applied brain, inc.

How to output a mono channel

Does anyone know how to output mono tracks to a single output.
When I try to output a mono signal, all my outputs are paired i.e. to outputs 1-2, 3-4 etc
Is is possible (it must surely be!) to do this?

mattdean wrote:
Just pan the mono track hard left and it will come out of Output 1.
Pan the other track hard right and it will come out of Output 2.
That's definitely way to do it. But it points up another missing "Pro" feature from Logic "Pro".
You should be able to assign a mono channel to a direct mono hardware output.
I hope if they ever deliver an update to Logic that they will think seriously about adding this and other "standard" features of old school hardware mixers. Then, while they're at it they can work on a dedicated monitor mix, cue and talkback system. Ya know, like we had in the '70's with all that "outdated" technology?
Sure, you can build many of these things yourself in the environment. That's what we have to do. But that's kinda like selling a mixer without direct outs or talkback and then saying "Sure, but you can build that yourself with a handy dandy soldering iron and some wire!".
Fingers crossed for version 8.020000001
Due sometime next millenium.

How to output sound from Zen Neeon to speaker without using

how to output sound from Zen Neeon to speaker directly?
as far as i know, i can only play content in my mp3 player using speaker with usb cable connected to pc
i just wonder how i play using "play" button in mp3 player and the sound will output to speaker directly?
need extra line-in cable?

my speaker system is subwoofer,but i not very sure it's 2. system.
the cable from the speaker is slightly too big to connect to the player headphone jack. and no sound come out after i play.
why?

Output post processor unable to process XML report

Hi,
In production environment output post processor unable to process large financial reports. Below is error in request log file
Error 1: ompleted post-processing actions for request 1046445.
Exception in thread "OPPAQMON:36846" java.lang.OutOfMemoryError: Java heap space
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:146)
at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:1005)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1307)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3449)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3550)
at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4710)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1374)
at oracle.apps.fnd.cp.opp.OPPAQMonitor.waitForMessage(OPPAQMonitor.java:429)
at oracle.apps.fnd.cp.opp.OPPAQMonitor.run(OPPAQMonitor.java:114)
at java.lang.Thread.run(Thread.java:619)
Error 2: Beginning post-processing of request 1046926 on node FORTISERPAPP1 at 21-FEB-2012 15:32:39.
Post-processing of request 1046926 failed at 21-FEB-2012 15:42:39 with the error message:
The Output Post-processor is running but has not picked up this request.
No further attempts will be made to post-process this request, and the request will be marked
with Warning status.
I have done changes suggested in step 2 and 3 of metalink note id 737311.1.
Please help to fine tune the opp so that I can complete financial reports.
Regards,
Raj

I have increase the java heap size for OPP to 2 gbHave you bounced the OPP?
Please see these docs.
Output Post Processor (OPP) Log Contains Error "java.lang.OutOfMemoryError" [ID 1266368.1]
Output Post Processor (OPP) Log Contains Error "java.lang.OutOfMemoryError: Java heap space" [ID 1268217.1]
XML Publisher Data Template Request XDODTEXE Fails with Java.Lang.OutOfMemoryError [ID 390968.1]
How to Configure the Account Analysis Report in Release 12 for Large Reports [ID 737311.1]
Out Of Memory Error When Running XML Publisher Template Re-Generator Concurrent Program [ID 788935.1]
Previewing PDF Generates 'java.lang.OutOfMemoryError: java heap space' Error [ID 415995.1]
Large Reports are Not Produced When Using BI Publisher Scheduler [ID 1088838.1]
Thanks,
Hussein

How to generate the reports in each process

Dear Experts,
In my client i am having 4 different process. client want each process wise report. One of our colleague is telling that one account is sufficient for all the Process. i am having a doubt
1. How he could generate the reports each process wise?
In VKOA settings i want to assigne 4 accounts to
condition type -KOFI          account key - ERL
What is the requirements?
Thanks in Advance.
Thanks&Regards,
Venkat

i am having 4 different process.
   client want each process wise report
How are you differentiating this ??   By sales area ??? By document type ??? There are certain standard reports like
a) MCTA
b) MCTE
c) MC+E
d) MC+Q
which you can explore whether they meet your requirement.
thanks
G. Lakshmipathi

How to Output Nodes from XML web service to a FLV?

Hi
I've used AS3 to query a web service and obtain the resulting XML. I need to parse the result down to just a few nodes for a given location. I can tackle that separately. I am wondering how I output the parsed XML to a flash video file (.flx)? The video has place holders for the XML node values. What do I need to do to place the XML results in the video?
Thanks,
Sid

Andrei1 wrote:
What is a content of XML nodes? I am not sure what you mean by "inserting nodes". Do you mean that you want to display some information over the video?
And yes, encoders do take XMLs to inject metadata into video. But this is metadata only.
OSML = Open Source Media Framework:
http://www.opensourcemediaframework.com/
By inserting nodes, I mean that the XML web service returns data for each city, which needs to be parsed to just high temp, low temp and current condition. Those 3 values needed to be dispalyed over, or woven into, the video at each city location. My thought was that AS3 could somehow recognize the 3 placeholders for each city and insert the high temp, low temp and condition icon into each placeholder. However, when I import the FLV file into Flash, there are no elements into which I can infuse this data.

How to create the variable variant in process chains for ip

how to create the variable variant in process cahins for ip

Hi venky,
check these links
http://help.sap.com/saphelp_nw70/helpdata/EN/c0/980398e58611d194cc00a0c94260a5/content.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/c0/98038ce58611d194cc00a0c94260a5/content.htm
bhaskar

How to output contents as they're processed

Similar Messages

Maybe you are looking for