How to overcome Dump during Insert Command

Hi Abappers,
When I am trying to upload the text file into the Database,
I am using Insert command using internal table.
When the record exist, it gives dump saying duplicate records.
How to convert that dump into the error message?
Please Reply.
Regards,
Rahul

Rahul,
Insert FROM TABLE itab [ACCEPTING DUPLICATE KEYS]
Effect
If you specify an internal table itab, several rows are created from its content for insertion in the database table. A row for insertion into the table is taken from each row of the internal table according to the same rules as for a single work area Einfügenwa. The line type of the internal table has to meet the prerequisites for use in Open-SQL statements.
If a row witht he same primary key or a same unique secondary index does not already exist in the database table for any of the rows to be inserted, all rows are inserted and sy-subrc is set to 0. If the internal table is empty, sy-subrc is also set to 0. The system field sy-dbcnt is always set to the number of rows that were actually inserted.
If a row with the same primary key or a same unique secondary index already exists in the database table for one or more of the rows to be inserted, these rows cannot be inserted. In this situation, there are three possibilities:
Use of ACCEPTING DUPLICATE KEYS
If the addition ACCEPTING DUPLICATE KEYS is specified, all rows are inserted for which this is possible. The remaining rows are rejected and sy-subrc is set to 4. The system field sy-dbcnt is set to the number of lines that are inserted.
Handling an exception
If the addition ACCEPTING DUPLICATE KEYS is not specified, a treatable exception occurs CX_SY_OPEN_SQL_DB (it always occurs since Release 6.10). Rows are inserted until the exception occurs. The number of rows that are inserted is not defined. The system fields sy-subrc and sy-dbcnt retain their previous value.
Runtime error
If the addition ACCEPTING DUPLICATE KEYS is not specified and if the exception is not handled, then a runtime error occurs (it always occurs prior to Release 6.10). This executes a database rollback that reverses all changes to the current database LUW. This applies in particular to rows that were inserted before a double entry occurred.
i would also suggest you to see SAP help by pressing F1 because some time may we miss but SAP never.
Amit.

Similar Messages

How to refresh selectItems during a command action

I am trying to figure out how to modify the selectItems during the processing of a command action. The command action modifies the database and the selectItems needs to be refreshed by this command. However, the selectItems is getting populated before the action method is called. Is there any way to explicitly set the selectItems during the command action?
Here are the pertinant tags on my jsp page:
<h:selectOneListbox value="#{generateDailyFile.selectedFilename}"
binding="#{generateDailyFile.fileListSelect}">
<f:selectItems value="#{generateDailyFile.items}"
binding="#{generateDailyFile.filesSelectItems}"/>
</h:selectOneListbox>
<h:commandButton value="Generate"
action="#{generateDailyFile.doAction}" />
When the page first opens it loads the selectItems from the generateDailyFile.getItems() method. However, when the commandButton's action calls generateDailyFile.doAction() I need to refresh the selectItems.

your selectitems are from the data base i think they have to be latest from the DB......Since they are not working as desired...
----what is the scope of the object you are building the selectitems.If it is session previous instant pravails so the items are the same as before.
OR
--- in the OnPageLoad() make a call to build the select items that gets you a recent copy.

How to update based on condition during insert on child table

hi all,
i have three tables, first table enquiry(enqid, item, type) where all enquiries are entered. after that table bom (bomid, item, enqid, rawmatl) and route (bomid, routeid,routename). in this bom & route are Master Detail table, where entries are made on a later period. the requirement is to update 'type' in enquiry table during insert on Route table.
for 1 row in bom table there will be more than 5 rows in route table. the condition to update type field in enquiry is, scan the first 5 rows of route table during insert and if routename field contains 'JG' the update type with 'J'. if 'JG' is not there scan the same 5 rows for 'ED' and update type with 'E'. if 'ED' is not there scan for 'CN' and update type with 'C' like this 3 more to test and update.
thanks in adv. am on 8i
Kris

yes, trigger or proc. or package
any idea how to do this...?

Error code 82 occurs during installation...how to overcome?

Error code 82 occurs during installation...how to overcome?

Hi Sameer,
You can follow the article: Error downloading, installing, or updating Creative Cloud applications which might help you to get your issue fixed.
If you still face any issues I would recommend you to paste a screenshot of the error message you are getting.
Thanks,
Ratandeep Arora

ORA-022887 error during insert operation how to handle properly ...

Hello everyone I got an error during insert operation how to handle it properly ?
SQL statements given below.
INSERT INTO PERSONEL.TRANSLATIONS (TID,SCRIPT_NAME,TAG,TR,EN,LOCAL)
VALUES ((SELECT PERSONEL.SQX_TID.NEXTVAL AS TID FROM DUAL),'TEST_TEST','TEST','TR','EN','LOCAL');
thank you

I could not find an error like ORA-022887. What is the exact error you are getting? Do a cut and past of the error here.
Ok the proper error is ORA-02287: sequence number not allowed here
As already said just remove the select and use the sequence directly in the insert.
Edited by: Karthick_Arp on Sep 11, 2009 1:04 AM

Short dump during activating the BC Set in SCPR20 - "GETWA_NOT_ASSIGNED"

Hi experts,
We have upgraded from SRM 4 to 7.0.We are facing an issue when activating the BC Set in SCPR20. A short dump is occuring inside the program 'VIRSA/SAPLZVIR'. We got the solution that some correction instructions mentioned in the SAP Note 1095700 needs to be mplemented. The steps mentioned in the Note are,
1) Run transaction SE54 and click the button 'Edit Function Group'.
2) Next, enter the name of the function group /VIRSA/ZVR1.
3) Select the radio button option 'Re-generate group-specific programs',and press the 'Change' button.
4) In the following popup please mark only the option 'structure spec.data declaration renewal' and press enter.
We were able to proceed with the first two steps but stuck up during the execution of step3. When we selected the radio button u2018Re-generate group-specific programsu2019 and when clicked on the change button, we are getting a message like u2018the name space u2018/VIRSA/ZVR1u2019 does not exists. Because of this we are not able to proceed with the last step.
Kindly provide some ponters as of how to overcome this issue ..
Thanks in advance,
Dhan

Hi there,
To overcome this error you need to go to se06 and make the "/VIRSA/" namespace as Modifiable.
Also, you should have a look at the following note if my first suggestion doesn't work.
1041089 Tx SCPR20: GETWA_NOT_ASSIGNED dump during BC Set activation
Hope this helps.
Kind Regards,
Matthew

Dump during creation of service entry sheet (ML81N)

Dump during creation of service entry sheet (ML81N)
Hi,
ML81N>Select PO>Enter>goto entry sheet create (empty page)>service entry sheet displayed with internal no. assigned >click tab "service selection">Input PO No.--> enter (here we get Dump ABAP RUNTIME ERROR "TABLE_INVALID_INDEX").
This is happening only for some POs. What can be the problem?. Is this has something to do with SAP database ???
- rahul

Hi,
it could have the cause that the note 1113220 was missing from your system or that data are inconsistent in your PO.
If you implemented 1113220 and you still get the dump, please check in transaction ST22 the run time error long text to the dump:
Parts:
- How to correct the error?
- Information on where terminated
- Source Code Extract -> if you set a breakpoint before the line where the error occured, you could debug the process.
- Active Calls/Events: if you have an own program displayed here, please check first your program wether it has caused the issue.
If these do not help to find out the problem cause, please open a SAP ticket and include all of the relevant information regarding the dump.
Regards,
Edit

IDOC to JDBC scenario: Does INSERT command expect a result value?

Hello,
we have an IDoc-to-JDBC-scenario configured on our XI 3.0, which uses the INSERT command to put a dataset coming from R/3 into a SQL database. This works fine.
Now a trigger has been activated on the database, which sets a flag to each dataset after inserting.
Because of this a system error occurs in the Adapter Engine and I found in the AuditLog (logSQLStatement=true), that the INSERT command is processed correcty, but in the next step an error is shown up: 'SQLServerException. A result set was generated for update.'
Could it be, that the trigger returns a result value, which can't be handled on the XI ?
If yes, how can I solve this issue? I have read something about the different methods execute(), executeUpdate() and executeQuery(), but I don't know how and where this has to be configured...
Thanks in advance,
Juergen

Hi Upendra,
I got some more information from the database adminstrator:
He used the following command 'exec xp_cmdshell @ExportCmd , no_output'
whereas @ExportCmd contains the command.
With the no_output option, the xp_cmdshell does not return a recordset.
I hope this will be helpful to you.
Grtz,
Juergen

Using insert command in NVL function

How can we use insert command in a NVL function
exapmle : INSERT INTO employee
VALUES ( (NVL ( (SELECT emp_id
FROM employee
WHERE emp_name LIKE 'Test'),
(insert into employee values((select max(emp_id)+1 from employee),'Test')))));
I mean i will check for the record to exist in the table and if not exist i will add it to the table.

998504 wrote:
How can we use insert command in a NVL function
exapmle : INSERT INTO employee
VALUES ( (NVL ( (SELECT emp_id
FROM employee
WHERE emp_name LIKE 'Test'),
(insert into employee values((select max(emp_id)+1 from employee),'Test')))));
I mean i will check for the record to exist in the table and if not exist i will add it to the table.The first thing caught my eye is this
max(emp_id) +1A real bad piece of code. Never do that. Ever thought about multi user environment? Use a SEQUENCE.
If you want EMP_NAME to be unique (Which looks strange to me), then just add a UNIQUE constraint. You dont try to do what oracle already does really well.

MS05 transaction throws "SQL error: error during INSERT (table: &)"

Hi Team,
I am a BASIS engineer on MM system. we have a strange problem from customers we see an error on the MS05 screen with "SQL error: error during INSERT (table: &)" and when the support team runs MS01 transaciton this error gets resolved.
What I would like to know is what could be the likely cause of this error and how we can prevent it.
When I check the SM21 logs i noticed one log with "Transaction cancellation 61 204 ( PLAF )"
and under additional document section is the log I see the below information
Usually, the reason for this error is that an entry already exists
with the same key.
This problem can occur if the client was copied with the movement data
without adjusting the number range intervals.
Please check if the number ranges for this table have been set
correctly and, if necessary, correct the number range interval.
I am from BASIS and I have no clue in how the MM transactions are linked can any MM gurus help in identifying the root cause for this problem.
any help on this is highly appreciated
thanks
Vijay

Hi
Are MS05 & MS01 you're referring is a T-code?. if so, then they are associated with planning and a PP consultant can give a more clear picture on it. Try posting this to a PP forum.
Based on the error log, i guess this may arise because of the number range problem, when the document is getting saved and record is being tried to inserted into a table.
Thanks
E.Avudaiappan

How To Overcome When User Incorrectly Opened The First Inventory Accounting Period As Next Month

Hi,
User has opened the wrong first inventory account period. Instead of Aug-14, next period Sep-14 has been opened. There are transactions which need to be posted in Aug-14. How can I rectify this?
During my search in oracle support, I found below information but the note is not accessible.
"Internal Note 400900.1 How To Overcome When User Incorrectly Opened The First Inventory Accounting Period As Next Month"
Regards,
Ahmed

Hi ,
Try This Way...
   If you want to use the uesr exit in two places...
      If area = xyz
       variable1
     else
         variable2.
same function module you can use in different places...
If still not clear send me the full details where you want to use then i can send it to you with sample code.
Thanks..
Siri N

How to hightlight the new inserted data in the last low of JTable?

Could somebody help me?
i am doing the e-restaurant application system .
When press the food button, the JTable will list out the order details.
When the order is long, the scroll pane will show up.
My problem is[ b] how to hightlight the new inserted data in the last low of JTable when the food button is press every time?The scroll pane will automatically scroll down the to the new insertted data.
In the List, i get the effect like this command but in the JTable how?
list.ensureIndexIsVisible(orderDetails.getSize()-1);
thank in advance.
Below is the snapshot of my coding:
DefaultTableModel model=new DefaultTableModel(cells,columnNames);
OrderModel sorter=new OrderModel(model);
JTable table=new JTable(sorter);
JScrollPane scrollPane=new JScrollPane();
scrollPane.add(table);
Object[] object={foodName, "1",price};
model.addRow(object);
sorter.fireTableDataChanged();
sorter.fireTableStructureChanged();

The right place to ask this one is "Swing Forum.
http://forum.java.sun.com/forum.jspa?forumID=57

How are Windows Server Backup and Command Line Tools used in vCSHB installation?

How are Windows Server Backup and Command Line Tools used during the installation of vCSHB? Is it required in all types of deployments (PtoV, VtoV, PtoP)? Is it used to create the files that are put in the file share for the second node to use during vCSHB installation or is it only used during a vCSHB clone operation of a Physical to Physical deployment? Are these tools not used in some deployments?

You need Windows Server Backup installed on source and destination, and during the installation of vCSHB the installer will invoke the wbadmin (Windows Server Backup Utility) and will backup configuration and application data (application data is optimal but can decrease the sync time after installation of secondary node). On the secondary node you will need only run the vCSHB installer and everything will be restored.
Check this blog entry for some more info about some problems in P2P deployment: http://www.vcoportal.de/2013/12/vmware-vcenter-server-heartbeat-restore-on-a-second-node-a-journey/

Using textboxes in insert command

Sir,
I had a doubt about insert command while I was trying to give the content of the swing text boxes as the arguments to the insert command.Is it possible?.How can i give values to the fields of a table through GUI components.

Hi,
I meant using text boxes in insert statement.because all time we should not give literals.we should have got inputs from swing panel from which we have to
insert data into tables.So I asked how can i give variables or input GUI Components as arguments of insert statement. Also I gave the code below
//CRM Sections Campaign
//package marketing;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.sql.*;
public class CRM_Marketing_1B extends JFrame implements ActionListener
JOptionPane joptMessage;
JButton jbtnSave;
JButton jbtnClear;
JButton jbtnExit=new JButton("Exit");
public CRM_Marketing_1B(String title)
Container conMarketingPane=getContentPane();
conMarketingPane.setLayout(new FlowLayout());
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
JLabel lblCustomer_Id=new JLabel("Customer ID");
JLabel lblCustomer_Name=new JLabel("Customer Name");
JLabel lblCompany_Name=new JLabel("Company Name");
JLabel lblDesignation=new JLabel("Designation");
JLabel lblAddress1=new JLabel("Address1");
JLabel lblAddress2=new JLabel("Address2");
JLabel lblQuantity=new JLabel("Quantity");
JLabel lblUnit_Price=new JLabel("Unit Price");
JLabel lblInterest_Level=new JLabel("Interest Level");
JLabel lblContact_No=new JLabel("Contact No");
JLabel lblMobile_No=new JLabel("Mobile No");
JLabel lblEmail=new JLabel("Email Address");
JLabel lblEmployee_Id=new JLabel("Employee ID");
JLabel lblCampaign_Date=new JLabel("Campaign Date");
JLabel lblNext_Appointment=new JLabel("Next Appointment");
JLabel lblCampaign_Id=new JLabel("Campaign ID");
JLabel lblTeam_Id=new JLabel("Team ID");
JLabel lblOrder_No=new JLabel("Order No");
JLabel lblResult=new JLabel("Result");
JTextField txfCustomer_Id=new JTextField(30);
JTextField txfCustomer_Name=new JTextField(30);
JTextField txfCompany_Name=new JTextField(30);
JTextField txfDesignation=new JTextField(30);
JTextField txfAddress1=new JTextField(30);
JTextField txfAddress2=new JTextField(30);
JTextField txfQuantity=new JTextField(30);
JTextField txfUnit_Price=new JTextField(30);
JTextField txfInterest_Level=new JTextField(30);
JTextField txfContact_No=new JTextField(30);
JTextField txfMobile_No=new JTextField(30);
JTextField txfEmail=new JTextField(30);
JTextField txfEmployee_Id=new JTextField(30);
JTextField txfCampaign_Date=new JTextField(30);
JTextField txfNext_Appointment=new JTextField(30);
JTextField txfCampaign_Id=new JTextField(30);
JTextField txfTeam_Id=new JTextField(30);
JTextField txfOrder_No=new JTextField(30);
JTextField txfResult=new JTextField(30);
JButton jbtnSave=new JButton("Save");
JButton jbtnClear=new JButton("Clear");
JButton jbtnExit=new JButton("Exit");
conMarketingPane.add(lblCustomer_Id);
conMarketingPane.add(lblCustomer_Name);
conMarketingPane.add(lblCompany_Name);
conMarketingPane.add(lblDesignation);
conMarketingPane.add(lblAddress1);
conMarketingPane.add(lblAddress2);
conMarketingPane.add(lblQuantity);
conMarketingPane.add(lblUnit_Price);
conMarketingPane.add(lblInterest_Level);
conMarketingPane.add(lblContact_No);
conMarketingPane.add(lblMobile_No);
conMarketingPane.add(lblEmail);
conMarketingPane.add(lblEmployee_Id);
conMarketingPane.add(lblCampaign_Date);
conMarketingPane.add(lblNext_Appointment);
conMarketingPane.add(lblCampaign_Id);
conMarketingPane.add(lblTeam_Id);
conMarketingPane.add(lblOrder_No);
conMarketingPane.add(lblResult);
conMarketingPane.add(txfCustomer_Id);
conMarketingPane.add(txfCustomer_Name);
conMarketingPane.add(txfCompany_Name);
conMarketingPane.add(txfDesignation);
conMarketingPane.add(txfAddress1);
conMarketingPane.add(txfAddress2);
conMarketingPane.add(txfQuantity);
conMarketingPane.add(txfUnit_Price);
conMarketingPane.add(txfInterest_Level);
conMarketingPane.add(txfContact_No);
conMarketingPane.add(txfMobile_No);
conMarketingPane.add(txfEmail);
conMarketingPane.add(txfEmployee_Id);
conMarketingPane.add(txfCampaign_Date);
conMarketingPane.add(txfNext_Appointment);
conMarketingPane.add(txfCampaign_Id);
conMarketingPane.add(txfTeam_Id);
conMarketingPane.add(txfOrder_No);
conMarketingPane.add(txfResult);
conMarketingPane.add(jbtnSave);
conMarketingPane.add(jbtnClear);
conMarketingPane.add(jbtnExit);
setSize(900,900);
setVisible(true);
lblCustomer_Id.setLocation(50,50);
lblCustomer_Name.setLocation(50,70);
lblCompany_Name.setLocation(50,90);
lblDesignation.setLocation(50,110);
lblAddress1.setLocation(50,130);
lblAddress2.setLocation(50,150);
lblQuantity.setLocation(50,170);
lblUnit_Price.setLocation(50,190);
lblInterest_Level.setLocation(50,210);
lblContact_No.setLocation(50,230);
lblMobile_No.setLocation(50,250);
lblEmail.setLocation(50,270);
lblEmployee_Id.setLocation(50,290);
lblCampaign_Date.setLocation(50,310);
lblNext_Appointment.setLocation(50,330);
lblCampaign_Id.setLocation(50,350);
lblTeam_Id.setLocation(50,370);
lblOrder_No.setLocation(50,390);
lblResult.setLocation(50,410);
txfCustomer_Id.setLocation(250,50);
txfCustomer_Name.setLocation(250,70);
txfCompany_Name.setLocation(250,90);
txfDesignation.setLocation(250,110);
txfAddress1.setLocation(250,130);
txfAddress2.setLocation(250,150);
txfQuantity.setLocation(250,170);
txfUnit_Price.setLocation(250,190);
txfInterest_Level.setLocation(250,210);
txfContact_No.setLocation(250,230);
txfMobile_No.setLocation(250,250);
txfEmail.setLocation(250,270);
txfEmployee_Id.setLocation(250,290);
txfCampaign_Date.setLocation(250,310);
txfNext_Appointment.setLocation(250,330);
txfCampaign_Id.setLocation(250,350);
txfTeam_Id.setLocation(250,370);
txfOrder_No.setLocation(250,390);
txfResult.setLocation(250,410);
jbtnSave.setLocation(250,450);
jbtnClear.setLocation(350,450);
jbtnExit.setLocation(450,450);
txfCustomer_Id.setRequestFocusEnabled(true);
txfCustomer_Id.requestFocus();
jbtnSave.addActionListener(this);
jbtnClear.addActionListener(this);
jbtnExit.addActionListener(this);
public void actionPerformed(ActionEvent ae)
if(ae.getSource().equals(jbtnSave))
//' &txfAddress1& ',' &txfAddress2& ',' &txfQuantity& ',
//' &txfUnit_Price& ',' &txfInterest_Level& ',' &txfContact_No& ',
//' &txfMobile_No& ',' &txfEmail& ',' &txfEmployee_Id& ',' &txfCampaign_Date& ',
//' &txfNext_Appointment& ',' &txfCampaign_Id& ',' &txfTeam_Id& ',' &txfOrder_No& ',' &txfResult& '
try
Class.forName("jdbc.odbc.JdbcOdbcDriver");
Connection connCampaign=DriverManager.getConnection("jdbc:odbc:CRMSource");
Statement stmtCampaign=connCampaign.createStatement();
/* stmt.executeUpdate("insert into Campaign values('" &jtxfCustomer_ID& "',&jtxfCustomer_Name&,
' &jtxfCustomer_ID& ',' &txfCompany_Name& ',' &txfDesignation& ',' &txfAddress1& ',' &txfAddress2& ',
' &txfQuantity& ',' &txfUnit_Price& ',' &txfInterest_Level& ',' &txfContact_No& ',
' &txfMobile_No& ',' &txfEmail& ',' &txfEmployee_Id& ',' &txfCampaign_Date& ',
' &txfNext_Appointment& ',' &txfCampaign_Id& ',' &txfTeam_Id& ',' &txfOrder_No& ',' &txfResult& ')");*/
JOptionPane.showMessageDialog(this,"Statement was saved");
catch(Exception ex)
ex.printStackTrace();
I got "unclosed character literal" error when i tried to execute the above java source file .
help me to get the required result.

How to overcome looping problem in Table control?

If the table control displays,say for eg 5 rows in the screen,it is looping the same in flow logic.
What if the table control has 10 rows but only 5 rows are displayed? and i want to loop through all the records in the flow logic.
how to overcome this problem?
Points will be awarded for answers.
Regards
Raja

Hi
U need to insert a new LOOP for you internal table and store the data in a different headerline:
PROCESS PAI (or PBO).
LOOP AT ITAB.
     MODULE LOOP_ITAB.
ENDLOOP.
MODULE LOOP_ITAB.
     LOOP AT ITAB INTO WA.
         IF SY-TABIX = <TABLE CONTROL>-CURRENT_LINE
*--->It's the same record of LOOP of PAI (or PBO).
         ENDIF.
     ENLOOP.
ENDMODULE.
Max

How to overcome Dump during Insert Command

Similar Messages

Maybe you are looking for