How to overcome looping problem in Table control?

If the table control displays,say for eg 5 rows in the screen,it is looping the same in flow logic.
What if the table control has 10 rows but only 5 rows are displayed? and i want to loop through all the records in the flow logic.
how to overcome this problem?
Points will be awarded for answers.
Regards
Raja

Hi
U need to insert a new LOOP for you internal table and store the data in a different headerline:
PROCESS PAI (or PBO).
LOOP AT ITAB.
     MODULE LOOP_ITAB.
ENDLOOP.
MODULE LOOP_ITAB.
     LOOP AT ITAB INTO WA.
         IF SY-TABIX = <TABLE CONTROL>-CURRENT_LINE
*--->It's the same record of LOOP of PAI (or PBO).
         ENDIF.
     ENLOOP.
ENDMODULE.
Max

Similar Messages

Problem with Table control lines

Hi Friends,
This is the problem with table control lines:
I have screen with table control and I would like change the table control lines dynamicaly.
Exp:
In my PBO the Internal table which I am using to loop the TC is havig 7 records and its displayed with 7 records, now I have added one more record into my ITAB and now ITAB is having 8 records, when I am looping this ITAB with TC its taking the TC lines 7 only.
here is the code:
Initial values in gt_scr400 = 8
Initial values in tc_scr400 = 8
Now added one more recor into gt_scr400 , now gt_scr400 = 9.
LOOP AT   gt_scr400
       INTO wa_scr400
       WITH CONTROL tc_scr400
       CURSOR tc_scr400-current_line.
ENDLOOP.
I have used this logic :
DESCRIBE TABLE gt_scr400 LINES g_rec_300 .
tc_scr300-lines = g_rec_300.
but its not modifying the lines in my table control.
How to change the TC lines based on ITAB total records.
Thanks,
Sridhar

there is a field in TableViewName-xxx
don't remember the exact field name for (total no of records)
you can check it in debug. when you add records in Internal table, u need to modify this field which is set at the first time when table control is populated.

Reg:How to delete the column in table control also from database table.

Hi Experts,
Once again thank u all for giving the responses.
one more doubt is how to delete the columns of table control and also the record shold delete from ztable.
With Regards,
Saroja.P.

Hi,
If you want to delete the rows in the table control and simultaneously delete it from the database table, then you can implement a 'DELETE' functionality specific to your table control. Have a MARK field (you will find that in the screen attributes of the table control -> give a name for the MARK field, you will find an additional MARK column at the beginning of your table control). You can check whatever rows you want to delete from the table control, call the delete module.
"This portion of code inside the LOOP...ENDLOOP.
IF sy-ucomm eq 'F_DELETE'.
gt_itab2-check = mark. " Store the MARK field status into your internal table's correspoding field 'check'
MODIFY gt_itab INDEX tabcontrol-current_line.
ENDIF.
iF sy-ucomm eq 'DELETE1'.
DELETE gt_itab WHERE check eq 'X'. "Your internal table does not have rows that you want to delete
ENDIF.
Now you can modify your database table using the MODIFY statement.
MODIFY ZDB FROM TABLE gt_itab.

How to create vertical Scrollbar in table control?

Dear All,
How to create vertical scrollbar in table controll.?
regards,
Dharmesh

Hi
It should be created automatically, if you can't see it, try to set the field lines of table control
PROCESS PBO
MODULE SET_ATTR_TC.
LOOP AT ITAB WITH .....
ENDLOOP.
MODULE SET_ATTR_TC.
DESCRIBE TABLE ITAB LINES SY-TABIX.
<TABLE CONTROL>-LINES = SY-TABIX.
ENDMODULE.
Max

How to get value on the table control in infotyp e0008

Dear Freinds
I have written a user exit ZXPADU02 for my requirement
as per the requirement in i have calculated wa-poo8-bet01 = wa_p0008-ansal/12 and i have passed on to the INNNN structure .
Nowe when do a Create or Copy for a rcord in infotype 0008 iam not
getting value on Q0008-betrg field on the SCREEN , since it is table control how to get data on the table Control Cell .
Please let me knlow
regards

Hi Syamala,
The try to find the name of the table control and pass the values to it.
Of course you have to loop and endloop, the table control and mofidy it from the work area.
Message was edited by:
Sera

My Imac fails when I try to upgrade from Snow Leopard 10.6.8. I have to boot up from disk. Does anyone know how to overcome this problem?

My iMac fails when I try to upgrade from Snow Leopard 10.6.8. I have to boot up from disk. Does anyone know how to overcome this problem?   I need to upgrade in order to install latest software.

It would be lovely to know what your talking about. Upgrading from Snow Leopard does not involve discs.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase a redemption code at the Online Apple Store: OS X Mountain Lion. Mountain Lion is $19.99 plus tax. Use the code to redeem a download of Mountain Lion from the App Store. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later.
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model
             Identifier 5,1 or later.
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later.
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later.
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later.
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later.
         7. Xserve (Early 2009) - Model Identifier 3,1 or later.
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks/Yosemite- System Requirements
    Macs that can be upgraded to OS X Yosemite
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

How to add a column in table control

Hi ,
Can any one tell me how to add a column in table control? My requirement is to add two columns ( custom fields ) into table control ( It is a standard program). I have added the column in the table and also in the table control. But when I am running the standard program, The newly added column is not there. But I have added in the perticular screen. Change is not reflected.
Can anyone help me on this please.
Thanks in advance.
Regards,
Lakshmi.

Hi,
Ensure the following :
1. After adjusting the database, you`ll have to use the database utility and activate the table.
2. If you have changed the standard screen, in tcode se80 -- right click on the program and click activate all. This activates all objects related to that program.
Now execute the program.
Reward if helpful.
Regards

HT1386 Sry for disturbing, but i would to ask that how to overcome the problem of synchronising ? Itune showing me that the sync session is failed to start with my Ipad mini. Any ideas about what is going on ?

Sry for disturbing, but i would to ask that how to overcome the problem of synchronising ? Itune showing me that the sync session is failed to start with my Ipad mini. Any ideas about what is going on ?

What are you trying to sync?
I see you are on ios 7.
I also had upgraded my iPad Mini to ios 7 & then the 1st time I tried to open a Numbers file that was set up to sync w my MacBookPro, I got a warning that I would not be able to sync it any more w my Mac until I upgraded to Mavericks.
So if you are trying to sync Numbers, Pages or Keynote files between your iPad mini in ios 7 and a Mac that hasn't been upgraded to Mavericks that could be the problem.
I was very shocked to get that message since I bought Numbers on the iPad so that I could have a particular file on both devices & keep them synced. I had no clue when I upgraded to ios 7 on the iPad Mini that it would make it so the files in the iWorks apps woudln't sync any more.
So I finally decided to go ahead & upgrade to Mavericks after carefully preparing & updating other software so that it would work w Mavericks. But I got error messages so haven't even been able to download Mavericks & now having 2nd thoughts about doing so.
iPad mini ios 7
MacBookPro Mid 2012 Mountain Lion
iphone 4S ios 6

How can I work lsmw with table control using mm01 appl?

Hi
How can I work lsmw with table control using mm01 appl?
Is it difefrent the way we handle table control in BDC?
Thank You

Hi
How can I work lsmw with table control using mm01 appl?
Is it difefrent the way we handle table control in BDC?
Thank You

How to have push button in Table control

Hi Experts,
I have an internal table which I populate in table control. How can I have pushbutton in table control(in every row). If done how to have funtion code which will trigger PAI.
Thanks and regards.
Venkat

Hi,
I dont think that pushbuttons will be of much use as when you click a button same code will be executed all time.
So, you can take either selection column in table control (use the SELCOL in the table attributes)
or you can also take a checkbox in table control and then can perform action on lines which were selected by the user.
Hope this helps you out.
Regards,
Tarun

How to display icon status in table control

hi, i trying to display icon in table control its not displaying
i given below statment.
DATA: BEGIN OF WA_MARA,
        ICON1(4) TYPE C,
         END OF WA_MARA.
     INCLUDE <list>.
MOVE ICON_GREEN_LIGHT TO IT_MARA-ICON1.
APPEND IT_MARA..
when i debugging it display green icon but after run the program its display ' @08@ '   in table control.
how to display green icon in table control help me.

Hi,
check the link:
Table control in custom infotypes

When I send open office documents to a PC user (even saved and sent in the word format), the document reaches with serious format changes and is rendered unusable to the PC user. How to overcome the problem??

When I send open office documents to a PC user (even saved and sent in the word format), the document reaches with serious format changes and is rendered unusable to the PC user. How to overcome the problem??

I don't use OpenOffice (I have it on my internal just to play around with, but seldom even open it). I do use MS Word and have few problems sharing files - it's usually a font issue so I tend to use MS fonts for documents that I know will need to be shared.
Unless you need to make collaborative changed to the document, you could always save it as a pdf file. With Acrobat Pro you can even save a pdf file to a Word document with very little change in formatting.
If I were you - and you have a need for .doc or .docx files to travel and play nicely - I'd just invest in MS Office. If you don't have to send a Word file, try pdf.
Clinton

How to determine fixed line of table control using BDC program ?

Dear All,
I create program using BDC that contains table control.
Unfortunately the table control line of BDC program will depend on the resolution of our PC setting.
Sometime I have 2 lines, sometime 3 lines (in different PC).
How to determine fixed line of table control?
So it will never be confusing me whether I have 2 or 3 lines.
Thnx - Regards,
(Taufik K.)

Hi Taufik,
Check the table CTU_PARAMS and field DEFSIZE for setting fixed line of a table control.
CALL TRANSACTION 'VA01' USING it_bdcdata
OPTIONS FROM OPT
MESSAGES INTO it_mesg.
opt of type ctu_params.
WA_CTU_PARAMS-DISMODE = 'N'. "no screen mode
WA_CTU_PARAMS-UPDMODE = 'S'. "synchronus update
WA_CTU_PARAMS-NOBINPT = 'X'.
WA_CTU_PARAMS-NOBIEND = 'X'.
WA_CTU_PARAMS-DEFSIZE = 'X'. "Default size
Default size will play good role in terms of resoultion. in one system in table control you can see 10rows, but in others system it will show 20 records. it depends on resoultion. but when you set the default size then it will take same (default screen size) in all the systems when you run BDC.
Reward if helps.
Regards,
Senthil
Message was edited by: senthil kumar

How to execute multiple records in table control

HI.
I have a requirement that in table control user will select more than one row and when he clicks 'SAVE' it should go and sit in a custom table. how to pass more than one records.
thanks & regards.
sandeep

Hi Sandeep,
I understand your requirement .......
See this standard program........
<b>" DEMO_DYNPRO_TABCONT_LOOP_AT "</b>
<b>Understand how DELETE button is working,inorder to delete multiple lines....Copy this program if necessary..OK.
Simply,Replace DELETE statement with your INSERT statement to push records into your custom table....very easily you can do it.</b>
<b>Reward all helpful answers.</b><b>
Hope you problem is solved.</b>
Regards,
V.Raghavender.

How to disable single cell in table control.

Hi my requirement is to disable single cell in the table control. Please let me know How to do this.
If possible please provide good module pool examples.
Harish

Hi,
I´m not quite sure if this is gonna work. You have to make a loop over the screen and then you can change some characteristics of it, which includes the Input option:
LOOP AT SCREEN.
    IF screen-group1 = 'ABC'.
      screen-input = '0'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
I´ve used this code for selection screens but could help you. Check in SE11 all options for SCREEN.

How to overcome looping problem in Table control?

Similar Messages

Maybe you are looking for