How to override security for table access when using SAP Query?

We have a number of infosets which use table join between PA0001 and CATSDB table. To execute a query based on such a query you would need access to table auth group PA through S_TABU_DIS. This was earlier not a problem as SAP query was earlier used by support staff and not end users. We do not want to give S_TABU_DIS with to end users as this amounts to givin them access to all PA tables.
The generated code for the query checks for the condition
"%rtmode-no_authchk = space"
before going for the authorization check.
Thus, ideally the authorization check for an InfoSet can be skipped if we can pass X for this variable from the InfoSet definition. Is there a way to do this?
Would appreciste any inputs to help suppress the authorization check at this point. Thanks.....

>
Julius Bussche wrote:
> Perhaps you could replace it with a class of your own (transaction SE24)?
>
> I have not tried to do this; it was just a thought.
>
> Kind regards,
> Julius
unfortunately this does not work. SAP saw fit to 'hard-code' the implementation of the interface in RSAQEXCE:
(only parts of that abap displayed here).
170 data: iref type ref to if_query_tab_access_authority.
1107 *       FORM AUTHORITY_BEGIN
1112 form authority_begin using p_auth_classname type AQS_CLSNA.
1119   perform authority_init using p_auth_classname.
1120   call method iref->access_authority_begin.
well for my part (searching a solution for a query on LTAK, wanting L_LGNUM as an object) i'm out of ideas. i shall have to modify SAP-standard and disable the class and do my own coding in the info-set. no other possibility - i cannot allow S_TABU_DIS for group LA and even if i did, what help would it be - i would have to allow that to all companies in that client having WM - and that would be literally all - i need LGNUM here!

Similar Messages

How to avoid security information pop up when using BSP in SRM

Hi. I have created a custom BSP and have flagged it as HTTPS in the properties, and the URL does start HTTPS.
I have then put this BSP in a role in SRM and can access it from the internal ITS after logging into SRM. Obviously the main SRM URL is also HTTPS. The BSP actually does its job fine.
However, when I click on the BSP I get the security information pop up telling me that the page contains both secure and nonsecure items every time.
How can I avoid this?
I have read the article on the wiki, but it does not apply to my BSP as there are no links at all in my BSP, and everything is HTTPS.
We can not change the IE settings as all our desktops are locked down and configured in the same way from an outsource company.
Any help would be greatly appreciated.
Regards,
Dave.

Hi. I'd already seen that, and it is not quite the same as mine. That link is about calling a BSP as a catalog in SRM and switching from HTTPS to HTTP.
I am calling the BSP direct from the SRM main menu and everything of mine is HTTPS, I am not switching.
Do you have any other ideas?
Thanks a lot for your help.
Regards,
Dave.

How to override the default order UOM when using BAPI_PO_CREATE1...

Hello Experts,
How do I force BAPI BAPI_PO_CREATE1 to use my declared purchase order unit of measurement instead
of getting it in the material master data? For example, material A has a default purchase UOM of CV, but
when I create a PO using material A I want the purchase UOM to be EA instead of the default CV.
How do I do that?

Sorry settings in inforecord problem.

HT5622 How to clear drive for maintaining access and using internet and applications without interference?

Stop ads from interfering with apps

i said right there, that i didnt want to move any more stuff off of the computer, ill dump trash or compress files, but i need to make room.
Not being a smartass, but somtimes it doesn't matter what you want.
If you can't clear enough space you may have to move more files off, or buy a larger internal drive.
http://www.bombich.com/software/local.html
This is not tested on Tiger, but there may be an equivilent.

How to insert date into ms access database using sql query in servlet

sir all thing is working well now only tell me how we can insert date into ms access database which is input by user .
insert into db2(bookname,studentname,date) values('"+bname+"','"+sname+"',date_format)";{code}
or either the system date is inserted with query .
plz help me
thanx

bhavishya wrote:
sir all thing is working well now only tell me how we can insert date into ms access database which is input by user .
insert into db2(bookname,studentname,date) values('"+bname+"','"+sname+"',date_format)";{code}
or either the system date is inserted with query .
plz help me
thanxAnd that SQL statement is another reason to use PreparedStatement. I assume bname and sname are input from some form? Well, if that's the case, simply inserting them into SQL by simple String concatenation is just begging for all sorts of problems. What if there is an apostrophe in the entry? Broken Statement. Worse, it's a wide open invitation to an SQL Injection attack.

How to create variant for table/view ?

Hi,
When I go through SM30, I find a radio button called variant. I don't know the effect.
Can anyone tell me how to create variant for table / view ?
I want to know when we need to create variant for table/view.
Best regards,
Chris Gu

hi ,
Whenever you start a program in which selection screens are defined, the system displays a set of input fields for database-specific and program-specific selections. To select a certain set of data, you enter an appropriate range of values.
For further information about selection screens, refer to Selection Screens in the ABAP User's Guide.
If you often run the same program with the same set of selections (for example, to create a monthly statistical report), you can save the values in a selection set called a variant
Procedure
To create a new variant:
       1.      On the ABAP Editor initial screen, enter the name of the program for which you want to create a variant, select Variants, and choose Change.
       2.      On the variant maintenance initial screen, enter the name of the variant to be created.
Note the naming convention for variants (see below).
       3.      Choose Create.
If the program has more than one selection screen, a dialog box for screen assignment appears. The dialog box does not appear if the program only has one selection screen. The selection screen appears in this case.
       4.      If there is more than one selection screen, select the screens for which you want to create the variant
5.      Choose Continue.
The (first) selection screen for the report appears.
If your program has more than one selection screen, use the scroll buttons in the left-hand corner of the application toolbar to navigate between them and to fill the fields with values. If you keep scrolling forwards, the Continue button appears on the last selection screen.
       6.      Enter the desired selection values, including multiple selection and dynamic selection.
       7.      Choose Continue.

I am working with Adobe 'Classroom in a book' and it's asking me for 'write access' when saving.

I am working with Adobe 'Classroom in a book' and it's asking me for 'write access' when saving.
How do I do that.
I tried going to file >get info and it would not allow me to unlock.
How do I do that?

It sounds like the folder you are saving to does not have the proper permission for you to write to it. What OS are you using?

How do I secure PA0001 table by Personal Area

Hi All,
How do I secure PA0001 table by Personal Area?
Usually Personal Area is defined by the data element PERSA, but in case of PA0001 table it is using WERKS. usually WERKS is a data element for Plant which is used in many other auth objects.
Can anyone please tell me if there is any way to secure PA0001 table by Personal Area?

If I understand correctly, you are having a custom report created which picks up data from PA0001 table and you want the report to pick up only certain entries from the table which is pertaining to a personnel area that the user is authorized to.
In that case, you can have a auth check included in the custom report on P_ORGIN (or P_ORGINCON) along with S_TABU_DIS, so that PERSA that your user is authorized is picked up and only those are passed as input to PA0001 to fetch relevant data. Or if user has a option to specify PERSA in selection screen of your report, auth check is made first on P_ORGIN to check if user has authorization to that PERSA or not and then fetch data from the table accordingly.
Thanks
Sandipan

[svn:fx-trunk] 10545: Make DataGrid smarter about when and how to calculate the modulefactory for its renderers when using embedded fonts

Revision: 10545
Author:   [email protected]
Date:     2009-09-23 13:33:21 -0700 (Wed, 23 Sep 2009)
Log Message:
Make DataGrid smarter about when and how to calculate the modulefactory for its renderers when using embedded fonts
QE Notes: 2 Mustella tests fail:
components/DataGrid/DataGrid_HaloSkin/Properties/datagrid_properties_columns_halo datagrid_properties_columns_increase0to1_halo
components/DataGrid/DataGrid_SparkSkin/Properties/datagrid_properties_columns datagrid_properties_columns_increase0to1
These fixes get us to measure the embedded fonts correctly when going from 0 columns to a set of columns so rowHeight will be different (and better) in those scenarios
Doc Notes: None
Bugs: SDK-15241
Reviewer: Darrell
API Change: No
Is noteworthy for integration: No
tests: checkintests mustella/browser/DataGrid
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-15241
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/DataGrid.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridBase .as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridColu mn.as

Hi Matthias,
Sorry, if this reply seems like a products plug (which it is), but this is really how we solve this software engineering challenge at JKI...
At JKI, we create VI Packages (which are basically installers for LabVIEW instrument drivers and toolkits) of our reusable code (using the package building capabilities of VIPM Professional). We keep a VI Package Configuration file (that includes a copy of the actual packages) in each of our project folders (and check it into source code control just as we do for all our project files). We also use VIPM Enterprise to distribute new VI Packages over the network.
Also, as others have mentioned, we use the JKI TortoiseSVN Tool to make it easy to use TortoiseSVN directly from LabVIEW.
Please feel free to contact JKI if you have any specific questions about these products.
Thanks,
-Jim

How to set sourceURL for MS Access database in other computer?

How to set sourceURL for MS Access database in other computer?
getConnection("jdbc:odbc://www.micrsoft.com:9999/msaccess");
How do you determine the port for the MS Access?
Thank you very much.

How to set sourceURL for MS Access database in other computer?You don't.
How do you determine the port for the MS Access?You don't.
Databases like Oracle and MS SQL Server have 'server' software which runs on a server computer. Requests talk to that server software. MS Access does not have a server, so there is nothing to talk to.
You either must use a DSN or create you own server. For the DSN each client must have a mapped driver to the computer with the database. For your own server search the Sun site for JDBC drivers or use RmiJdbc (http://www.objectweb.org/)

How to set optional for table structure in functiona module

hi experts,
as i have small doubt regarding
while publishing web service by using rfc where i am unable to set optional for table structure i am able to put optional for import parameters may i know how to set optional for table structure ....
reagrds prabhanjan

Ignoring the TABLES/CHANGING/EXPORTING argument...
while publishing web service by using rfc where i am unable to set optional for table structure i am able to put optional for import parameters may i know how to set optional for table structure
Why not? There's no issue with marking a TABLES interface parameter with 'Optional' and publishing the function module or function group as a web service...

How to add security for Azure Cloud Service?

Hi,
We have build some API's in azure cloud service.
We want to add security for Azure Cloud Service.
How to add security for Azure Cloud Service?

Hi Santhosh,
You may add security for your API's by using:
Mutual certificate authentication
Using OAuth 2.0
Manage developer accounts
Regards,
Manu Rekhar

How to create a clickable Table of contents using Crystal Reports 8.5

How to create a clickable Table of contents using Crystal Reports 8.5. I was able to create the table of contents using subreport and temporary table. but not able to link to the pages.
how to make it clickable ?
-Vivek

Hi Vivek,
To you may create on demand sub report.
In main report only the link will be shown when you click on the link the sub report will be opened in a new tab.
It can be placed in a Group header and to show the data for that particular group only.
Click on the Help menu in the crystal Reports Designer and open the Crystal Reports Help
Go to Index tab and type in subreport
Select Creating On demand you will get lot of information on that.
Please let us know if that is enough to solve your problem
Regards,
Aditya Joshi

How do you update the Bios safely when using onboard RAID mirror? Z87-G45

How do you update the Bios safely when using onboard RAID with Z87-G45? I'm using a simple two drive, RAID 1 mirror setup.
I'm currently at bios 1.4, and want to move up. However, last time I upgraded the BIOS, the machine rebooted with improper settings for the RAID (they get hosed during BIOS flash) and Windows decided to auto-repair the only boot drive it could see, one half of the mirror, because it couldn't see the RAID array correctly and *POOF* bare-metal reinstall required.
My PC will not let me press the DEL key on bootup to access the bios, even with MSI Fast Boot not installed. It just ignores the DEL key and tries to load windows which, if that happens, will flame-out my RAID array after a bios flash if I can't catch it to enable the RAID first before windows loads.
I do not want to rebuild my PC again simply because I do a BIOS update.

FYI: BIOS 1.4 & 1.8 are using the same RAID version: 12.7.0.1936
based on this RAID surprise should not hapends.
But as pandaz says if you have no issues, leave bios update alone.
there are still risks something to messed up,
best do a backup of your data just in case if you want to try latest version

How to numberformat when using sql:query alogn with c:forEach JSTL tags

Is there anyway to format the numeric values returned from the database when using <sql:query> alogn with <c:forEach> tags
Here is my jsp code
<sql:query..../>
<c:forEach var="row" items="${queryResults.rows}">
<tr>
<td><c:out value="${row.COL1}" /></td>
<td><c:out value="${row.COL2}" /></td>
</tr>
</c:forEach>
Col1 values are numeric without any formats Eg: 1000, 10000, 1000000 etc.
how can i format them to 1,000 , 10,1000 , 100,000 etc

It is polite to mention what your answer was. These posts are not just here for you to ask questions, but to be used as a resource for other people to find answers. Saying "I solved it" with no details helps noone.
I presume you discovered the JSTL <fmt:formatNumber> tag?

How to override security for table access when using SAP Query?

Similar Messages

Maybe you are looking for