How to padding the zeroes and space befoer sending from XI to R3 system.

Hi Experts,
How to padding the zeroes and space befoer sending any data from XI to R3 during mapping, how to write a java code to implement this logic, please help me with the coding or any other alternative.
thanks
dhanush

to pad spaces you need to write a simple UDF
for right padding use the following
while( inputField.length() < Integer.parseInt(totalLength))
inputField = inputField + " ";
return inputField;
for left padding use the following
while( inputField.length() < Integer.parseInt(totalLength))
inputField = " " + inputField ;
return inputField;
Note:in the above examples <i>inputField</i> will be the input to UDF i.e. the sender field which you need to pad and send to receiver , and <i>totalLength</i> will be a constant i.e length of the field you want on receiver side after padding.
also i m not a Java expert so please check for syntax and semantics for code:) to me it looks correct
Thanx
Aamir
Message was edited by:
Aamir Suhail

Similar Messages

How to get the Full and final settelment date from PC_payresults

Hi Experts..sairam.
We are preparing Functional specification for a report on Full and final settelement.
We need to extract the full and final settelement date from payresults.
Full and final settelement would be an offcycle run.
How can we identify the particular Offcycle is meant for full and final settelment.
Full and final settelement can be done after date of relieving.
Please share your ideas to get the field names and logic to fetch.
Thanks in advance.
Regards,
Sairam.

Hi Praveen,
I found it from HRPY_RGDIR through SE11.
But im in confusion in thinking on Logic to find the Full and final settelment processed date.
First of all..Report has to check WPBP table weather Employment status is Zero.
Later..It has to read the HRPY_RGDIR table.
Here what the system to check.What conditions to be validated to fetch the Full and final settelment processed date.Will it be FPPER and INPER as 00000000 or shall we do it from offcycle reason.
Please share your ideas.Thanks in advance.
Regards,Sairam.

How to remove the delete and edit toolbar buttons from the Overview page

Hi,
In the account/contact overview page, we see that the interaction history assignment block does not support the EDIT and DELETE options.
However, when we click on the hyperlink description of an activity in the interaction history, we get into the overview page of the activity. Here we can see the DELETE button and the EDIT button.
Is there a way to remove these two options from the overview page of an activity which is in COMPLETED status and in the interaction history section?
Please advice.
Thanks & Best Regards,
Ramesh.
PS: We use CRM 5.2 Web UI.

You can hide the box that shows the snippets and the "Restore Previous Session" box with code in userContent.css
*http://kb.mozillazine.org/userContent.css
*http://kb.mozillazine.org/Editing_configuration
You can use the ChromEdit Plus or Stylish extension to have easier access to the customization files.
*ChromEdit Plus: http://webdesigns.ms11.net/chromeditp.html
<pre><nowiki>@-moz-document url(about:home){
/* hide snippet container on the about:home page */
#snippetContainer { display: none !important; }
/* hide sessionRestore container on the about:home page */
#sessionRestoreContainer { display: none !important; }
</nowiki></pre>

How can stop the bdump and udump trace files from accumulating?

The files are growing so until it is filling up the user's c: drive. It's hundreds of files over 20 megs.

Angela,
The management of those files is a reposnsibilty of the DBA. ie The files dumped there are from background processes, session traces and your alert log.
The alert log in bdump should be checked daily and errors investigated. Some errors will result in trace files being dumped. The alert log will always grow during normal operation and you can simply delete it or better yet zip it up and store it somewhere for a period of time.
You can clean up the udump user traces files by simply deleting them periodically. For other traces you should have a look to see what they are for. Any ORA 600 traces should be investigated.
If you are not a DBA and this seems to much trouble then you can just delete the files to reclaim the space.

I have always been able to zoom in on my photo by holding the cmd and space bar, that changed and now it creates a box and zooms in on that area and I can't zoom out using cmd space bar. How do I change it back to the original way of zooming?

i have always been able to zoom in on my photo by holding the cmd and space bar, that changed and now it creates a box and zooms in on that area and I can't zoom out using cmd space bar. How do I change it back to the original way of zooming?

Select the Zoom Tool in the tool box and see if Scrubby Zoom is unchecked or greyed out in the tool options bar.
(you want Scrubby Zoom checked)

How to delete the file with space in name

Hi
I want to delete the file "test ex.txt" file.
i run the following command in command prompt.i can delete the file successfully.
/bin/rm -f /mnt/"test ex.txt"
I want to run the command from java.So i am using the following code
String cmd = "/bin/rm -f /mnt/\"test ex.txt\"";
Runtime rt = Runtime.getRuntime();
process = rt.exec(cmd);
The file was not deleted.
How to delete the file with space in name?
Help me

Use the form of exec that takes an array of command + args.
arr[0] = "/bin/rm"
arr[1] = "-f"
arr[2] = "/home/me/some directory with spaces";Or use ProcessBuilder, which is the preferred replacement for Runtime.exec, and which Runtime.exec calls.

How usnig manuplate the Import and export Key word.

How usnig manuplate the Import and export Key word? and
how do the clear of those variable?

HI ,
For IMPORT Keyword :---
To retrieve data from the global memory area, use the IMPORT statement. The most basic form of the IMPORT statement is:
IMPORT <variable> FROM MEMORY.
To give the variable a different name in your program from what it is called in the global memory area, use the TO clause. You must define the local variable name with a DATA statement in your program. The format is:
IMPORT <global var> TO <program var> FROM MEMORY.
As with the EXPORT statement, you can specify multiple variables per statement, and you have the option of specifying which cluster ID you wish to import from.
After each IMPORT statement, SY-SUBRC is set to indicate whether or not the cluster ID you specified exists (but not whether specific variables were imported specifically). SY-SUBRC is zero if the cluster exists.
It is also possible to IMPORT and EXPORT to database tables .
ABAP memory that is used to store exported data is user and transaction specific, so when passing data between programs in this manner you must make sure that transaction boundaries are not crossed. Otherwise the contents of this memory will get destroyed and will not be available to the importing program.
For Export Keyword :---
The EXPORT statement moves data from your program into a global memory area. The most basic form of the EXPORT statement is:
EXPORT <variable> TO MEMORY.
This places the specified variable into a global memory area that another program can later read using the IMPORT statement.
You may specify multiple fields in the same EXPORT statement. For example:
EXPORT KNA1-KUNNR KNA1-BUKRS TO MEMORY.
You can give variables a different name in the global memory area using the FROM clause. For example, the following code exports SY-SUBRC and gives it the name RETVAL in the global memory area:
EXPORT RETVAL FROM SY-SUBRC TO MEMORY.
You can specify a cluster ID when exporting data to memory. You can freely choose the name of the cluster ID, which can be up to 32 characters long. Each cluster ID specifies a particular area in memory. Each time you EXPORT data to the same cluster ID, all data previously written to that ID is erased. For example:
EXPORT SY-SUBRC TO MEMORY ID u2018LJS1u2019.
Hope u understand
Thanks
Shambhu

How to cut the zeros after the decimal point ?

Hello everybody,
does anyone know a solution how to cut the zeros after the decimal point at at CHAR data field?
For example the field
&RM06P-PRMG1&
This is a char field in the database, so that the command
&RM06P-PRMG1(.0C)&
doesn't work.
At the moment the output on the form is like that
124,000
It shoud be like that
124
It would be great if anyone could help me!
TIA!
Strobbel

Hi Strobbel,
If you are working on standard sapscript, first make a zcopy of it, do the modifications in that and assign the new form to the output types in tcode NACE.
First you need to create a program to write the logic, so go to tcode SE38 , create a new program (say zremove_zero) with Program type Executable.
Now you will see ABAP Editor with statement;
Report zremove_zero.
Add the following lines below the report statement.
*&      Form remove_zero
*       text
*      <--lv_AMT text
FORM remove_zero CHANGING lv_amt.
DATA p_amt TYPE p.
MOVE lv_amt TO p_amt.
MOVE p_amt TO lv_amt.
Condense lv_amt.
ENDFORM.
Now save and activate the program.
Now open the zcopy of your script and Just above the statement &RM06P-PRMG1& write the following lines;
/: perform remove_zero in program zremove_zero
/: changing &RM06P-PRMG1&
/: endperform.
Now you can see your amount printing without decimals.
Try and let me know, hope i have guided you clearly.
Regards
Karthik D
P.S.: I advice you to take help from an ABAPER.

How to reclaim the missing disk space

i have a t61 with a 250gb HD. when i migrated to window xp the local disk c showed only 120gb and there is no other local disks appeared on the window desktop. can anyone help me how to recover the missing disk space. i am not a computer
expert so please showed it as detailed as you could. thank you for your attntion

You probably installed from original Windows XP disk [w/o SP2], and original XP support disks only upto 128gb. If you install SP2/3 later on, the support will be added , but the partition woun't magicaly grow by itself If you want to resize it w/o loosing data you have to use 3rd party tools like GParted Live CD [free] or Partition Magic [commercial] software... http://gparted.sourceforge.net/
Bored SysAdmin Blog

How to know the balance and validity of internet data in iPad

How to know the balance and validity of internet data in iPad?

Sir I m using internet in ipad4 with airtel network
They provide me 2gb data with the amount of 255 rupees
And now I inserted the sim in my ipad4
And start the surfing on safari n all
And now I wanted to know how much data is balance.

How to change the name and description of a wim using DISM

With Imagex we could update the name and description of the wim with on easy command:
imagex /info img_file [img_number or
img_name] [new_name] [new_desc]
e.g.
imagex /info Win7Combined.WIM 1 "Win7(x86)" "Windows 7 x86"
Since the ImageX tool is deprecated in Windows 8 and has been replaced with DISM, can someone explain how to update the name and description with one easy command using DISM like we could with Imagex?

It looks like this person had the same issue. Have you seen this
link
It talks about exporting an Index into a new WIM. Which, in a way, would be renaming it. It's really recreating it and you have to give it a name. But it seems to work.
Dustin Estes - MCP | www.dustinestes.com

I have 2 iphones and a macbook on one mobile me account. How can I keep mail in the macbook and one iphone private from the other iphone?

I have an iPhone 3G, an iPhone 3GS, and a MacBook on one macmail and mobile me account. How can I keep mail on the MacBook and iPhone 3 private from the iPhone 3GS?

Pretty much. I don't understand why you need to worry about MobileMe, though. I'd guess the vast majority of us with iDevices don't have MobileMe accounts at all. That's pretty much why it failed.

My iPhone 5 has broken and is being replaced with a new iPhone tomorrow. However, My carrier (orange) will b picking up my broken iPhone and I am unsure how to secure the content and icloud data on the broken phone. Is there a way to display the data?

My iPhone 5 has broken and is being replaced with a new iPhone tomorrow. However, My carrier (orange) will b picking up my broken iPhone and I am unsure how to secure the content and icloud data on the broken phone. Is there a way to disable the data held on it and ensure that if it is fixed, nobody can use/see my data and access my account?

Hi Gazpan,
Thanks for visiting Apple Support Communities.
I recommend using the steps in this article to back up your iPhone if possible:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
You may also find this advice helpful for your situation:
What to do before selling or giving away your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht5661
If you no longer have your iOS device
If you're using iCloud and Find My iPhone on the device, you can erase the device remotely and remove it from your account by signing in to icloud.com/find, selecting the device, and clicking Erase. When the device has been erased, click Remove from Account.
If you're unable to complete either of the above steps, you should change your Apple ID password. Changing your password won't remove any personal information that is cached on the device, but it will make sure that the new owner can't delete your information from iCloud.
Cheers,
Jeremy

How to change the day and time seen on the calendar

Hi.
I am a bit confused as to how to restrict the day and time shown on a calendar.
The ical help says this:
To change the days of the week or the number of hours that appear in the main calendar view, choose iCal > Preferences, and make your choices from the Week and Day pop-up menus in the General pane. For example, you can choose to only see the hours from 9AM to 5PM on Monday through Friday.
However, in my preferences pane, i don't have a either a week or day pop up menu that i can see, so i can't seem to restrict these fields. It's really frustrating as calendars are beginning at 1am!!!!
Anybody got any ideas?
Thanks
David Tobin

OK, but what did the help menu mean when it said..
To view the day's, week's, or month's events, click the Day, Week, or Month button at the bottom of the iCal window.
To change the days of the week or the number of hours that appear in the main calendar view, choose iCal > Preferences, and make your choices from the Week and Day pop-up menus in the General pane. For example, you can choose to only see the hours from 9AM to 5PM on Monday through Friday.
To change which months are shown in the mini-month calendar (in the lower-left corner of the iCal window), click the arrows above the mini-month calendar. To see more than one month, drag the mini-month divider (the horizontal gray bar above the diamond) upward.
To see events that are earlier or later in the day, use the scroll bar on the right side of the main calendar view.
To change the range of time in the main calendar view that is not shaded (representing your "normal" day), choose iCal > Preferences. In the General pane, choose the times you want to appear in white (not shaded) from the "Day starts at" and "Day ends at" pop-up menus. All times outside that range are shaded.
This suggests that you should be able to limit the hours actually shown on the calendar to a set range as opposed to just changing the shaded area.
Have you any idea how to achieve this, as i don't see the popup menu suggested with...
To change the days of the week or the number of hours that appear in the main calendar view, choose iCal > Preferences, and make your choices from the Week and Day pop-up menus in the General pane. For example, you can choose to only see the hours from 9AM to 5PM on Monday through Friday.
I am confused!!
Any other ideas?
David Tobin

How to print the Terms and Condition page ine the sap-script

Hi experts,
                         i got the requirement that how to print the Terms and condition page in the script,i have the three pages, having the same main window, in the last of the main window(all three pages) i have called the hard coded text(i.e so10 text), but when i am displaying the output data get printed in the first page but i am getting the second page heading on the top of the terms and condiions page. In all the three pages i have the same main window, if i make change in any window i will affect all the other main windows. so please suggest me how i need to go.HOW TO GET GRID OF THE TEXT ON THE TOP OF THE SECOND PAGE OF THE TERMS AND CONDITONS.
like this i have called in the MAIN WINDOW
/E : LAST ( IN ALL THREE PAGES)
       INCLUDE ZSD_INVOICE_TERMS TEXT OBJECT TEXT LANGUAGE EN.
IN THE TCODE SO10
NEW PAGE TERMS.
1) TERM MS AND CONDITONS TEXT.................................................
FIRST->NEXT, NEXT->NEXT,,   TERMS--->TERMS.

Hi,
1. Create a new page by Name : LAST
2. Identify the text element which will be the last element in the form in the debug mode.
Mostly Ex: SUM, TOTAL, LAST etc.,
3. the page linking should be
First --> Next
Next --> Next
4. In the Text element identified in the step 3.
Write the following code
/: NEW PAGE LAST
/: INCLUDE the standard text created for the terms and conditions in SO10
Check the syntax for the command but the logic will be the same.
It should resolve your problem.

How to padding the zeroes and space befoer sending from XI to R3 system.

Similar Messages

Maybe you are looking for