How to change the day and time seen on the calendar
Hi.
I am a bit confused as to how to restrict the day and time shown on a calendar.
The ical help says this:
To change the days of the week or the number of hours that appear in the main calendar view, choose iCal > Preferences, and make your choices from the Week and Day pop-up menus in the General pane. For example, you can choose to only see the hours from 9AM to 5PM on Monday through Friday.
However, in my preferences pane, i don't have a either a week or day pop up menu that i can see, so i can't seem to restrict these fields. It's really frustrating as calendars are beginning at 1am!!!!
Anybody got any ideas?
Thanks
David Tobin
OK, but what did the help menu mean when it said..
To view the day's, week's, or month's events, click the Day, Week, or Month button at the bottom of the iCal window.
To change the days of the week or the number of hours that appear in the main calendar view, choose iCal > Preferences, and make your choices from the Week and Day pop-up menus in the General pane. For example, you can choose to only see the hours from 9AM to 5PM on Monday through Friday.
To change which months are shown in the mini-month calendar (in the lower-left corner of the iCal window), click the arrows above the mini-month calendar. To see more than one month, drag the mini-month divider (the horizontal gray bar above the diamond) upward.
To see events that are earlier or later in the day, use the scroll bar on the right side of the main calendar view.
To change the range of time in the main calendar view that is not shaded (representing your "normal" day), choose iCal > Preferences. In the General pane, choose the times you want to appear in white (not shaded) from the "Day starts at" and "Day ends at" pop-up menus. All times outside that range are shaded.
This suggests that you should be able to limit the hours actually shown on the calendar to a set range as opposed to just changing the shaded area.
Have you any idea how to achieve this, as i don't see the popup menu suggested with...
To change the days of the week or the number of hours that appear in the main calendar view, choose iCal > Preferences, and make your choices from the Week and Day pop-up menus in the General pane. For example, you can choose to only see the hours from 9AM to 5PM on Monday through Friday.
I am confused!!
Any other ideas?
David Tobin
Similar Messages
-
How to change date format and time zone from the client.
In order to change time zone, you need to go Administration-> Access Management (Step 1), and select your name on the right (Step 2).
Then select Edit tab at the bottom of the screen, and change both Time Zone and Regional Setting.Thanks for sharing, Agnes.
-
How can I add the date at the top of the screen along with the day and time display?
Hello,
How can I add the date at the top of the screen along with the day and time display?
Thanks so much!Open System Preferences>Date & Time:
Ciao. -
HT2513 I can barely see the day and time numbers in ical - any suggestions?
I can barely see the day and time numbers in ical. I have tried adjusting contrast but doesn't help. Any suggestions?
Could be corrupt plist try deleting com.apple.systemuiserver.plist
found here by using Finder>Go>Go to Folder (command shift G):
copy and paste:
~/Library/Preferences/ com.apple.systemuiserver.plist
delete this plist.
now open terminal (Applications/Utilities/terminal.app) and paste the command:
killall SystemUIServer
and return. This command will kill the process and MacOS X will automatically rebuild the menu bar, clearing out old cache. Quit Terminal.
Restart if neccessary. -
Position of the days and dates being on the right side of the day in the week calendar.
I'm having a huge problem with the days and dates being on the right side of the day in the week calendar. Can I change that to the left upper side?
it makes the whole schedule off balance you see.Thanks for stating that. So quickly. That *****. I also now see that more people have problems with this. Where can I complain?
-
Why won't the date and time stay in the menu bar?
I just installed 10.6.2 and even when I use System Preferences to check the box in the Date/Time panel they flicker and disappear from the menu bar. Why won't the Date and Time stay in the Menu Bar? Any suggestions? Thanks.
Frank BDoesn't any bring up the fact that Apple has so many customers with problems that the refuse to help unless you pay them cash? They update you and screw you over and then offer no useful troubleshooting scenarioius to help their millions of customers. It is because they want millions of our dollars. I hate Apple.
-
Report the date and time of all the systems reporting to sccm
Hi,
We have a requirement to report the date and time of all the systems reporting to SCCMnot sure if this is possible.
Appreciate any help regarding this.
ThanksNot sure I understand what you are asking. Do you want to get the date/time for the last hardware inventory, heartbeat discovery etc?
Kent Agerlund | My blogs: blog.coretech.dk/kea and
SCUG.dk/ | Twitter:
@Agerlund | Linkedin: Kent Agerlund |
Mastering ConfigMgr 2012 The Fundamentals -
My 3rdG iPod Touch is frozen on the home screen and the volume and time works but the screen doesnt, what do I do?
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
I am an attorney with a law firm that is involved in litigation where the date and time of a 3 way call that took place in June 2009 between an attorney at my firm, a broker, and the broker's client. The broker and broker's client are both Verizon Wireless customers. I have their phone records for June 2009. I am 100% certain a three way phone call took place between the attorney in my firm, the broker, and broker's client. However there is no phone record that shows a phone call between all three individuals. .
The first Verizon Customer is a local real estate broker with a West Palm Beach, Florida phone number with a 561 area code. The other Verizon Customer is the broker's client and was in CT on both 6/24 and 6/25. The broker's cell phone records were reproduced by Verizon in 2014. I believe the client's cell phone records were reproduced by Verizon in 2013. The client has an 860 area code. The law firm is in Palm Beach County with a 561 area code. Any phone call from the law firm to the broker would be local and would only show up on the broker's cellphone record. Any phone call from the law firm to the broker's client (who was not a client of the law firm) would be reflected in the law firm's long distance records. There is no such phone call. The broker's cell phone records show a 10 minute phone call between the broker and the law firm at 2:24 p.m on 6/24. There is a 8 minute phone call from the broker to the law firm at 9:39 am on 6/25 and a 22 minute phone call from the law firm to the broker at 9:48 am. The broker's cellphone record shows that during the 9:48 phone call the broker attempted to perform a 3 way call with the client at 10:04 and again at 10:05. Each attempt lasts just 1 minute and neither shows up on the client's cell phone records. The phone call with the law firm and broker lasts an additional 4 minutes.
The broker's and client's cell phone records show a 10/11 minute phone call on 6/25 depending on the record at 8:41 am. There are numerous other phone calls between the broker and client on other days.
If the broker called the client then called the law firm, then the initial phone call should be reflected in both Verizon invoices, and the 2nd call should be reflected in the broker's record.
The same would be true if the client initiated the phone calls.
If the broker called the law firm or law firm called the broker, then called the broker's client the phone call should be reflected in the law firm's long distance records and the client's records. It is not. There is no documentation that shows the client was participating in a 3 way call.
My question is why not? Alternatively, is it possible for the 3 way call not to be reflected in the records? I have the phone records of both customers. I also have the invoice number for the broker. How can I find out if the broker added the client to any of the above calls.Hi papal74. I am sure that this is a situation in which these call records are extremely important. In order to provide additional information about these call records we would need to speak with you personally. Please give us a call at 800-922-0204. This way we can get down to the bottom of this.
ErinW_VZW
Follow us on Twitter @VZWSupport -
How do you know the date and time synchronization in the windows version?
Where can I see the date and time synchronization?
There's a toolbar button sitting in the Customize Palette. Move that button to a toolbar or into the Open Menu box; when you hover the cursor over that button a tooltip will appear with the day-of-week and the time of the last Sync event.
-
How to change material type and industrial sector of the exsisting material
Hi,
There is an issue where user wants to change material type and industrial sector of the exsisting material .Is it posible to do so??
IF not ,how can we delete that material from material master so that another material with same number and required material type and industrial sector can be created.
Points will be definitely rewarded.
Thanks
RohitHi Rohit,
You can change the material type in MMAM trxn code if the material dosenot conatain any open purchase requisitions, open reservations & open purchase orders. Also material stock should be zero.
Remember the new material type should have same attributes same as old material type.
OLD Material New Material
1) Standard Price 1) Standard Price
2) Manufacture part 2) Manufacture part
profile actvated profile actvated
3) Quantity & Value 3) Quantity & Value
Updation in all areas Updation in all areas
4) should have same GL 4) Should have same GL acs
acs
It is not possible to change Industry sector once created.
If you want to delete the Material, you can flag it in MM06 trxn code.
Reg,
Ashok
Dont forget to Assign points if useful. -
HT2473 How can I get the date and time back on the menu bar?
Several items disappeared from my menu bar for no reason known to me. I miss the date and time and want it back. Please . I have gone to System Preferences and clicked "date and Time" but it will not allow me to check anything on the page even though there is a box "Show date and time in Menu bar".
What should be my next move?One more thing might help us
In the Finder > Date & Time Preferences > Take a Full ScreenShot of the entire display showing the "absence" of the check box (or whatever) to Show in Menu Bar
⌘ Command + ⇧ Shift > Press ' 3 ' > release all three
Use the camera tool > locate the screenshot in the Desktop (not sure whether it will say "Picture 1.png" or have a TimeDateStamp as a title.
ÇÇÇ -
Can I get the date to display along with the day and time
can I get the date displayed with the day of week and time?
Hi Mary, you can, but what version of OSX are you running on what Mac?
See if this helps for starters...
http://paulstamatiou.com/how-to-display-date-in-os-x-menu-bar -
Do not like updated ICal because the day and times are too faint to be read.
Since update of ICal, the numbers (day of month and time of day) are too faint to be read. Can this be fixed?
There are no setting to change that right now. You may try to increase the contrast of your display while working with iCal
System Preferences -> Universal Access -> Seeing
in the Display section adjust the "Contrast" slider. -
Why can't I set the date and time insert to the format I want?
I would like the date to be formatted in the short form on my docs. However whenever I insert date and Time it always come out at the long form i.e.
Monday, 15 April 2013.
Right clicking allows me to edit it but the next time I inset it the long form re-appears.
I've tried to do it via the system preferences > language and text > region > customise route but the same thing thing happens. I choose the short form at the top of the choices but it still comes out in the long form on the docs.
Only a minor point but it is irritating 'cos it should be simple (probably is 'cept I'm a bit slow).
I'm running Mountain Lion 10.8.3
Thanks
W.Wilfred. I found this in one of the More like this posts >>>>> opposite your first post. It might apply if you are on Pages 08. Insert Date/Time: Apple Support Communities
I would never have thought of double or right clicking on the date itself. I haven't tested it to see what formats exist. One last suggestion, if we don't resolve it here, write a new post and put it in the iWork pages columns. There you may meet up with the gurus in that persuasion.
Maybe you are looking for
-
Unable to open AirPort options sheet in Network System Preference
Hi there, There are several posts (and a Radar bug number, 4273111) reporting a certain difficulty with systems that have been upgraded to Tiger. For some reason: When viewing the AirPort network interface in the Network system preference, certain in
-
Bug with Overall Signature Validity Icon
I am finding that there are inconsistencies in the way Adobe Acrobat 9.0.0 and Adobe Reader 9.0.0 indicate Overall Signature Validity states for digitally signed documents. Adobe's white paper on this issue at http://www.adobe.com/devnet/reader/artic
-
Dreamweaver Template use and Seo
Hi, I am using dreamweaver templates for my online java training website http://www.javatutoronline.com . My doubt is will using dreamweaver template positively or negatively affect seo for my website.
-
My daughter forgot her paasword and locked her i pod up!!! How can I resolve this???
-
I have a requirement to load complex (hierarchical) flat file to Oracle database. The flat file has multiple (different) records. Each record is fixed positional.Here is an example 1 123455 6777888 2566773 4444 test 466666 7844 tyeww 477777 7844 tyew