How to Park or place PO as on-hold using BAPI_PO_CREATE1
Hi Gurus:
I am using BAPI_PO_CREATE1 to create a PO from a custom developed Java application.
The business is requesting that the PO should be Parked or put in the On_Hold status because they may not have all the requisite information at the time of creating the PO. The idea is to get a PO number even though all the information is not yet available.
After getting all the required information, the buyer will go through the SAP GUI to update and create the PO from the Parked PO.
Is there a flag in the BAPI BAPI_PO_CREATE1 that can be used to Park the PO?
Appreciate your feedback.
Thanks
Hi Mandar:
Thank you very much for your response. I am not trying to mark a line item as deleted or lock a line item.
The requirement is to be able to create a PO and park it or keep it on hold status when all the information is not available - yet get a PO number for some other purpose.
I know we can park a requisition and a PO but am not aware of how this can be accomplished when using the BAPI BAPI_PO_CREATE1.
Once again, thanks for taking time and responding.
Similar Messages
-
"Discovery Manager" role cannot place a mailbox on hold
My Company is testing Exchange 2013 and Exchange Online. We would like to have all discovery functions managed by our legal team. We have assigned test users the “Discovery Manager” role. That role should allow them rights to search all mailboxes
and put search results on hold. Additionally, the discovery manager role should allow them to select a user mailbox in EAC, open the "Mailbox Features" page and enable litigation hold on the mailbox (no searching required).
We have found the second feature, enabling litigation hold without searching, is unavailable to discovery managers when using EAC. The "Mailbox Features" page is not exposed to discovery mangers using EAC. The discovery manager can place a mailbox
on hold using PowerShell but that would not be a reasonable option for our legal team.
Please confirm if my understanding is correct, discovery manager should be able to place a mailbox on hold as well as in-place hold using EAC.
Thanks in advance,
RonDoes "Get-RoleGroup "discovery Management" | FL *role*" show that the Legal Hold role is assigned to the Discovery Mgmt role Group? If so, then you may need to assign the "Recipient Management" or "Help Desk" role to those users as well or if you wish
to security trim their access, create a customized RBAC role for them.
Alternatively, see if they can simply set litigation hold via Powershell with set-mailbox
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied. -
How to bypass material rounding rules when using 'BAPI_PO_CREATE1'?
How to bypass rounding rules when create a PO using 'BAPI_PO_CREATE1'?
I faced a problem when using the BAPI to create PO. As the material has rounding rule, thus, when I create the PO using this BAPI, the quantity will be rounded according to the rule.
How can I bypass the rounding rule so that I can upload the quantity according to the quantity that specify in my upload file?
Edited by: Irene Sam on Jun 17, 2008 1:08 PMI've solved the problem with passing the parameter no_rounding into the BAPI.
poitem-no_rounding = 'X'.
poitemx-no_rounding = 'X'.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = poheader
poheaderx = poheaderx
IMPORTING
exppurchaseorder = w_ebeln
TABLES
return = poreturn
poitem = poitem
poitemx = poitemx
poschedule = poschedule
poschedulex = poschedulex
potextheader = pohdrtext
poaccount = poaccount
poaccountx = poaccountx. -
How do i add places to my photos in iPhoto?
How do i add PLACES to my photos in iPhoto?
you highlight a photo ar a number of photos and then you click info at the menu bar at the bottom, it show a map and a little search bar. Type in the place you want to name it, then you click info again. Then it's saved.
-
How do I add place names to events in iPhoto 11
How do I add place names to events iPhoto 11 version 9.2.1, I can do a single picture at a time but when you have a 100 or so it's going to get tedius.
I have found messages via google that tell me how to do it but it dos'nt work.
I select the event I want to locate. then I click "cmd i" to get the info screen up. Then at the bottom of the screen is a picture of the world and a box next to it where I think you should type in your location, but that just takes me to a map of the USA and I can't do anything.
Help please, what am I doing wrong.Same problem here. Cannot understand why it is soooo difficult...
-
How to park document with reference?
Hi All,
We have function to post document with reference in SAP but how about park document with reference?
Can anybody help me?
Thanks n really appreciateThanks for your reply. Fyi, I've applied employee limitation to post manual journal at tcode OBA4 and OB57.
User A : >100K - 500K
User B : >500K - 1 MILL (Asst. Manager)
User C : >1 MILL (Manager)
Normally user A will park all the journals but after apllied the limitation, user A only can park for the journal (normal tcode F-02 or other tcode) which not more than 500K. The limitation affect the park as well.
Alternative for tcode F-02:
User A : Park doc at FB50 (any amount) and post at tcode FBV0 by other user. There's no park or post with reference.
User request to park with reference.. Any idea?
Thanks friends -
How to maintain decimal places in BOM Qty & what is the essence of base qty
Hello PP members
How to maintain decimal places in BOM Qty & what is the essence of base quantity in BOM ?
Thank Youur first question is not understood, You can have maximum of 3 decimals in BOM item qty.
Base qty is the qty which is refered to all the BOM items.
example -
Product X, base qty 1
Raw material 1 - componen t qty= 1
Raw material 2 - Component qty= 5
This means To produce Product with qty1, it needs raw material 1 qty 1 and raw material 2 qty 5.
This means To produce Product with qty10, it needs raw material 1 qty 10 and raw material 2 qty 50.
This is the meaning of Base qty..it is the referece qty refered to all the components.
About the decimal places
let us say example 2
To produce Product with qty1, it needs raw material 1 qty 1 and raw material 2 qty .0001.
When you enter this in SAP for the raw materialm 2 system will give error message that you need to enter the qty with maximum 3 decimal places, hence you need to enter as below
Product with qty10, it needs raw material 1 qty 10 and raw material 2 qty .001.
This is how you need to adjsut the base qty and component qty with decimalplaces moer than 3,
pl come back -
How can I open "Place..." dialog from my plugin?
Hello All,
There is a "Place..." item in "File -> ...". If we can click on "Place...", "Place" dialog will open and asks for .ai file to place the whatever the art is there in that file in the current document. Right.
Now what I want is, if I click on one of the button in my plugin UI, "Place" dialog will open and art will be drawn in the current document.
I looked into the API documentation and found AIPlacedSuite::ExecPlaceRequest( ) function, but no use.
How can I open "Place" dialog from my plugin?The SDK does not provide any calls to open the Place dialog directly.
You have a few potential solutiuons, however.
A. Implement your own file dialog box, and use the Place suite. Which I think is perhaps the most elegant solution.
B. Programitcally create an action that opens the Place dialog. You can record an action that does this to see what file would have to be written (see "Insert Menu Item..." then type "Place", enter while recording). Then you could call the action with the Action suite.
C. The dialog could be opened using the scripting capabilites (for instance AppleScript). Your program could then write/call the AppleScript. I know it can be done with AppleScript, and I suspect other scripting languages such as Java might be able to do it.
Hope this helps. -
How do I delete places in the organizer that are not being used?
In Elements Organizer 12, I think I accidentally created a "place" on the map that I do not want to apply to any photos. When I try to do conduct an advanced search, the place is appearing as a checkbox. I do not want this place to show up in the search field, as we have never been there. How do I remove places that are not associated with any photos?
If you are accessing emails from multiple devices, you are better off using the IMAP protocol. Then the devices sync with the server and they are all looking at the same information. With POP, you are going to get your emails spread about, some on Outlook, some on the iPad. It could get very confusing.
By default, the iPad will not delete from a POP server. Instructions for changing this are here: http://support.apple.com/kb/HT3228 -
How to link Business Place with plant
Dear Expert,
We are getting Business Place wise FBL3N report for Vat Payable GL code.
We have created Business Place under Extended Witholding Tax tab.
We are generating tax invoice in different plant.
But how to link Business Place with plant so that FBL3N report will show Business place.
Regards,
AlokYou can't make an entry directly to production server.
You have to make the changes in Dev server then transport it to production server.
Try the follow path
SPRO-IMG-Cross-Application Components-General Application Functions-Place of Business-Assign Business Places to Plants. -
How to enter Business place and section code of already posted documents
Hello All,
We have some posted documents from month of July, in which user has not entered business place and section code
Please tell me how to enter business place and section code in these posted documents..
I have already searched on other links, but were not useful..
Thanks...Hi
Can you share the screen shot and message no for the error? Also check if you have specified the actual MIRO Document No and not the FI Document No of MIRO Document.
regards
Sanil Bhandari -
How to update Business place & Section Code for posted Documents
Hi,
I want to update business place and section code in existing documents, How to update business place and section code in the posted Documents. Is there any validation to check business place and section code while posting Document.
Thanks in advance
Best Regards
RajHi Raynaju,
Business place is an organizational unit and it below company code level that is primarily used for reporting taxes on sales/purchases.
For that no need to go for validation.Go to the field status and give the Business place & Section Code as required fields.
There is a option in SAP as Document change rules.There give the company code,field name and account type
Now you can change the fileds in posted document itself.
May be this information is useful to you
If you have any doubt feel free to ask
Regards
Aneesh
Edited by: Aneesh kumarA on Jul 22, 2009 12:45 PM -
How to required Business Place and Section Code in FB60 screen
Dear Guru
Please guide me how to required Business Place and Section Code in FB60 screen. in SAP
Regards
Tapan MaityHi Tapan,
Theer are various discussion over this issue . You can apply validation specific to transaction code as well as on the document type.
Hope this would help you.
Regards
Pankaj P -
How to Update Business Place & Sec.Code Field in Posted Document
Dear All,
Pls suggest how to update Business Place & Section Code field in documents which are posted without entering Business Place & Section Code. Pls tell me how to achieve this without using Validations & Substitutions. Any table entries can be maintained for this? Kindly guide.
Regards
AbhijeetHi,
Thanks for sending the replay,
I had already update the Material document through the J1INPP T. code. but it not use for update FI
Document and i want to update Business Place & Section Code in FI document.
Please suggest,
Regards
Abhijeet -
How to make Business place mandatory
Hi, SAP Gurus,
How to make business place mandatory in "MIRO ". As i know there are two ways
1) Through Screen Variant T/code: SHD0
2) Validation
But here i Never worked on sreen variant level and validation, I need step by step to make business place mandatory in MIRO
bY USING ABOVE T/CODES,
Regards,
PrabhakarHi Bhanu,
Use T.Code GGB0 - Validation maintenance - Change Validation overview.
Choose Financial Accounting in Application area. Select Line Item and click Validation create icon.
Give a Validation ID BP and text Business Place Mandatory and save.
Click Step icon - Step 01 - now the prerequisites; check and message will come in margin panel.
Give text for the step 01. Click Prerequisites. You can see the Table Fields Structure BKPF, BSEG, and SYST.
If you double click on this you view individual fields relating to these master tables.
Your prerequisite may be like this :
Company Code is = XYZ ; T.Code = MIRO & F-43; Posting key = 31 ( Credit Vendor)
Double click BKPF > double click BKPF-BUKRS> click "=" > click constant > a pop up box will open
here fill up your company Code XYZ. This will automatically come in the top box. Click "AND". Now there is a back arrow
button in the table field panel and come back to the original display of master tables. Here double click SYST
Click SYST-TCODE > click "=" > click Constant > in the pop up box enter tcode MIRO. If you want to add F-43,
you have to click "AND" after this and repeate SYST-TCODE = F-43. Now click back arrow and double click BSEG and
click BSEG-BSCHL > Click "=" > Click Constant > in the popup window enter 31 and save the prerequisites.
(For the above requisites, the system will check if Business Place is 1000 is filled up during transaction and if not it has to
give a error message.)
Now Click Check in the right margin below prerequisites menu. Again the table list will be seen with BKPF, BSEG and SYST
Double click BSEG > click BSEG-BUPLA > Click "=" > Click constant and in the pop up box fill the business place 1000 and save
the check menu.
In the right margin now double click message. Here you can create a message text of your own "Business Place mandatory"
Save the Message and come back and finally save the Validation so created.
Now use T.Code OB28 and enter your Company Code > give call point 2 > and Activation level 1 and save the entries.
Now you can check for the transaction in MIRO where without filling the Business Place field you cannot save the entries.
Hope the above steps will be clear for you. If you have any doubt please revert back.
Best Regards,
Sadashivan
Maybe you are looking for
-
Audit log of POST content stream for HIPAA
Gentlemen, One of the regulatory requirements developers of medical applications need to comply with is the complete logging of all access of and modification to Protected Health Information (PHI). Luckily for me I already have a custom authenticatio
-
2 days (and counting) to import a 10k photo catalog in LR5?
I recently upgraded to LR5 from LR4...upgrading that catalog was relatively fast and seamless. I'm moving a few things around now and created a brand new catalog in LR5 and I'm importing from the "old" LR5 catalog. This "old" LR catalog has about 10k
-
Need Help on Setting up OBIEE server setup
Hi All, I am new to OBIEE. we are setting up a server which can be utilized for Informatica and OBIEE. for that can anybody suggest which windows server is compatable to install the both softwares.
-
FDM fails to find valid Essbase member?
Currently using FDM 11.1.2.1 with adaptor into Essbase BSO cube. All mapping works fine except for one particular Essbase member - it is valid in the outline, but when browsing in FDM to add the mapping- the member account does not show up. I tried d
-
Getting older versions of apps
(Sorry if this was asked somewhere, but I can't find the answer) My apps are all current, but I need to know how to get an older version of an app to use on an iOS 4.2.1 device