How to pass argument to the Java Plugin JVM w/o using the Control Panel?

I want to deploy an applet to be loaded by the Java Plug In
and fix some settings of its Java Virtual Machine.
The JPI Control Panel offers two ways to pass arguments to the JVM,
none satisfactory.
1. while interactive via the Control Panel Window.
This cannot be a solution for a deployed applet.
or
2. by editing the system generated file that stores
the settings of the Plugin Control Panel, using a property
named javaplugin.jre.params.
The problem with this method is that if forces to access
and edit this property file which is stored at various locations
depending the client platform. Then, it may collide with other
settings for other applets.
Is there a way to pass the arguments to the JVM
from within the html file?
Has anyone found a solution to this question?
JPS

I am interested in this issue as well.
Did anyone find a reliable way to specify the runtime parameters that should be used by the Java Plug-in in order to execute a given Java applet?
I believe a good place to specify these runtime parameters would be the applet's JAR manifest: only digitally signed applets should be able to set the desired runtime parameters...
Any comments / suggestion would be greatly appreciated.
Regards,
Marco.

Similar Messages

How to pass arguments to a java program.

I want to pass a file name to java program while it is going to execute.
ex: c:\>java <.class> <filename>
so that i have to take that filename into a string. Is it possible? If it is possible please help me.
and how can i check whether the filename argument is given or not through command line argument?

public class Program{
public static void main(String[] args){
filename = args[0];
static String filename;
this code is working. But if I did not give filename, and I only give like this
java Program
Then how can i now whether the argument (args[0]) is passed or not?

How to pass arguments to script from plugin

Hello there....
I want to run a script from my plugin. To do this, I want to pass some arguments to the script. How can I do this? I also want to know how those arguments can be read in script?
Thanks in advance..

Here is a simple example of how to run some script code from a plug-in.
InterfacePtr scriptManager(Utils()->QueryScriptManager(kJavaScriptMgrBoss));
if (!scriptManager)
     return;
InterfacePtr scriptEngine(scriptManager->QueryDefaultEngine());
if (!scriptEngine)
     return;
InterfacePtr scriptRunner(scriptEngine, UseDefaultIID());
if (!scriptRunner)
     return;
RunScriptParams params(scriptRunner);
scriptRunner->RunScript("alert('hello from planet script!');", params);
Replace "alert(...);" with your own script.

How to pass parameters to the Control file while loading the data from flat file to staging table

Thanks in advance

Hi ,
LOADDATA statement is required at the beginning of the control file.
INFILE: INFILE keyword is used to specify location of the datafile or datafiles.
INFILE* specifies that the data is found in the control file and not in an external file. INFILE ‘$FILE’, can be used to send the filepath and filename as a parameter when registered as a concurrent program.
INFILE ‘/home/vision/kap/import2.csv’ specifies the filepath and the filename.
Hope this will help you......

How to pass arguments from PAPI to the process

Can any one tell me How to pass arguments from PAPI to the process.

The link Creating a new work item instance in a process using PAPI shows how to create instances on PAPI and pass in the variable information as they are being created.
Provide some additional detail if you're interested in seeing how to pass in variable information using PAPI for scenarios other than instance creation.
Dan

Hi, i am facing problem as to how to pass arguments received by my swf file to an .exe that i have c

hi, i am facing problem as to how to pass arguments received by my swf file to an .exe that i have created from a C++ project...do i need to tweak the code in the C++ project in some way that it accepts the input from the .swf file?

Hi there and welcome to our community
What you need to do is click the link below, then choose the forum most appropriate to the product you are using. In this forum we discuss the operation of the forums themselves.
http://forums.adobe.com/index.jspa
Best of luck to you in solving your issue! Rick

How to pass parameter to the Query String of the Named Queries'SQL

Firstly to say sorry,I'm a beginner and my English is very little.
Now I want to know
How to pass parameter to the Query String of the Named Queries'SQL in the Map editor.
Thanks.

benzi,
Not sure if this is on target for your question, but see #5 in the link below for some web screencasts that show how to pass an input text form field value to the bind variable of a view object. If you're looking for something different, maybe provide some more details such as what you are trying to accomplish and what technology stack you are using - for example, ADF BC, JSF, etc.
http://radio.weblogs.com/0118231/stories/2005/06/24/jdeveloperAdfScreencasts.html
Also see section 5.9 and chapter 18 in the developer's guide.
thanks

How to pass argument in main function ?

How to pass arguments in main function of one class from another class ?
I don't want to pass argument from command prompt.
I want to try something like this -
class Test{
public static void main(String args[]){
for(int i=0;i<args.length;i++)
     System.out.println(args);
class Fun{
public static void main(String args[]){
     Test t=new Test("Hello","good bye");
when i run Fun class it gives error.
Suggest me how can i do that.

In Fun class main method does not take arguments that is fine. In Test class instead of main method you can have constructor to take input parameters as suggested by BalusC
However, if you want to make your existing code work, you can call (though not appropriate) main() method of Test class from main() method of Fun class (As main() method is static object is not required to invoke this):
Test.main(new String[]{"Hello","good bye"});Here is your code:
class Test{
public static void main(String args[]){
for(int i=0;i<args.length;i++)
System.out.println(args);
public class Fun{
public static void main(String args[]){
//Test t=new Test("Hello","good bye");
Test.main(new String[]{"Hello","good bye"});
} Thanks,
Mrityunjoy

How to pass a filename to MQHRF2 header in IBM MQ using JMS Adapter in SAP PI

Hi Expers,
Can you please help on ...
how to pass a filename to MQHRF2 header in IBM MQ using JMS Adapter in SAP PI
Thanks,
Chandar

Hi Chandar,
Could you check the following post Re: Inserting custom header fields inside MQRFH2 (JMS Receiver adapter)?
I hope you find it useful.
Regards!

How: Using the same control panel for multiple vi and propogating changes to the control panel.

I have created a labview project that contains about 40 vi. Each vi has a control panel in common that is a group of ip address, or port address, and settings that are passed from high level vi to low level vi for the purposes of controlling and accessing our daq cards. As this control panel exist in all vi's and is required to be identical there is a problem when needing make a change or update the controls during development. The problem is how much time it takes to go and change every single vi's control panel. I wish to have a way of propogating a change in the control panel across all vi simultaneously.
All control in the control panel are in a bundle, so all values are passed in 1 wire.
I tried turning the control panel into a sub vi, and this way I can just "create control" and have outputs of the vi maniuplate settings, however if I update the vi, I still have to go back and create a new control for each vi as the control has changed.
I have tried using the subpanel and creating the control panel in a sub vi that is displayed in the subpanel, but this gives the unwanted consequence of not being able to view or change settings on the control panel if the program is not running, as subpanels blank out when the program is not running.
Is there another way to dispaly a subvi's front panel beside using a sub panel? Is there a better way to propogate changes in a bundle throughout a series of vi?
JW
Solved!
Go to Solution.
Attachments:
Labjack Comm Settings.vi ‏15 KB

Yes a type def would help you out and I'd take the next step to make it a strict type def if you want the appearence to be the same across all of its instances. You can also review this Nugget on Type definitions for more idea on this topic.
Have fun,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Firefox 6 will not load when I click the icon. I have tried to uninstall it, both through the control panel and geong straight to help.exe. In both cases nothing happens. How do I uninstall this program?

Firefox 6 will not load when I click the icon. I have tried to uninstall it, both through the control panel and going straight to help.exe. In both cases nothing happens. How do I uninstall this program?

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

How can I configure my EDIROL FA-101 in 5.1 Surround in the CONTROL PANEL?

Hi.I own a windows 7 pc with a realtek audio system.
I cannot configure my pc to 5.1 in the CONTROL PANEL.I've even installed the latest driver and 5.1 still doesn't show in the window,only stereo.
I've noticed that recently someone had a similiar problem at http://h30434.www3.hp.com/t5/Desktop-PC-Sound-and-Audio/How-do-I-configure-5-1-surround-on-s3480a/m-... but I dont get a 'SUPPORTED FORMATS' window where you get a DOLBY STEREO option to select.
Please help.
Regards,
Richard Steed

If you use the JDBC driver that's included in the AS/400 Toolbox for Java you don't need to use ODBC at all, you can access the AS/400 directly. See this link:
http://www-1.ibm.com/servers/eserver/iseries/toolbox/

HT5055 Just updated to lion and my cctv access has stopped functioning all I get is a white screen in the middle of the control panel where the camera shots should be. I think it is caused by JAVA but am confused as when i view on snow leopard it works

Just updated to lion and my cctv access has stopped functioning all I get is a white screen in the middle of the control panel where the camera shots should be. I think it is caused by JAVA but am confused as when i view on snow leopard it works can you help

Open "Java Preferences" either from spotlight or your utilities folder...it's probably going to say you need to install a java runtime. Then just click install!

I am fairly new to using Mac computers, I would like to know how to uninstall drivers, software and other things I might install on my computer. With a PC it's really easy, you just go to the control panel.

I am fairly new to using Mac computers, I would like to know how to uninstall drivers, software and anything else I may install on my computer. With PC it's very easy, you go the control panel, locate what you want to uninstall and with a few clicks it's done. Can someone please help me? Thank you.

See these:
Switching from Windows to Mac OS X,
Mac Basics—Tutorials on using a Mac,
Mac OS X keyboard shortcuts,
Apple How-To Guides for Mac OS X,
Anatomy of a Mac,
MacTips,
Switching to Mac Superguide, and
Switching to the Mac: The Missing Manual, Mavericks Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist,
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac.

I can't install correctly Adobe Captivate 8, cause a message of no connection to internet appears (I am connected to internet). Even though, when I want to unistall through the control panel it doesn't let me, anyone knows how to uninstall it??

I can't install correctly Adobe Captivate 8, cause a message of no connection to internet appears (I am connected to internet). Even though, when I try to unistall through the control panel it doesn't let me, an Uninstall Failed message appears, anyone knows how to uninstall it??
I've already tried Adobe Cleaner Tool, but it doesn't work, as the program is not listed as one of the proposed
Does anyone know how to uninstall it??
Thank you

Which are you after... installing Captivate 8 or uninstalling it (whatever "it" is)?
Sign in, activation, or connection errors | CS5.5 and later
https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

How to pass argument to the Java Plugin JVM w/o using the Control Panel?

Similar Messages

Maybe you are looking for