How to pass Multivalue parameters from main report to the subreport to a database stored procedure

I am having a Main Report, where the user selects the parameters, and calls the subreport which in turn calls the stored proc which updates the report parameters table, which will be used by all the other sub reports to filter data on.
It works fine when I pass single values from the Main report to the sub report, and it updates the database, but when I map the formula field to the subreport, the subreport does not even show up, and nothing happens on the database. I am thinking the subreport is not executing. I am using the 'Change Subreport Links' to map the formula fields to the subreport parameters.
Please let me know if there is any other work around or a sample report which solves a similar problem.

That is definitely a problem. CR 11.0 has been out of support for 5+ years(?). CR 11.5 has been out of support for close to 3 years.
As far as I am concerned, the suggestions given here are going for naught as presumably they are based on recent builds of CR (E.g.; CR 12.x or higher). I really doubt that Abhilash or Jamie remember if CR 11.0 had problems related to the issue at hand. But they do know that their suggestions work in current versions of CR.
Thus a suggestion; I suspect that you should be able to obtain an image from your IT where you can install CR 11.0 and update it to CR 11.5. Then use this as a proof of concept to the powers that be in your org that it is time to get with the times. BTW.; the most current version of CR is CR 2013, version 14.1.x(!). Again, something that your org should be aware of. So, even better than updating the image to CR 11.5, download the free 30 day eval of CR 2013 and try the suggestions in that version. The eval download is here:
SME Free Trials | SME Software | SAP
BTW.; CR 2013 is a side by side install, meaning that it will happily co-exist with your current CR 11.0 install.
- Ludek

Similar Messages

How To Pass Data Between A Main Report and a Subreport

Hello,
I'm working with Crystal Reports Professional XI.
I have a main report with two date parameters: BeginDate of Date type and EndDate of Data type. The main report has no details being printed instead it's grouped by a formula field and displays a summary count at the group footer. I have a subreport that is not linkable to the main report. The subreport is grouped differently. It has no detail records being printed and displays a summary count at the group footer as well. The two reports are using the same tables with the same linking relationship.
   I created the same two date parameters in the subreport but this isn't right because when I run the report then I get four Date prompts: BeginDate and EndDate parameter from the main report and the BeginDate and EndDate parameter from the subreport.
I'm not dong something right here. What do I need to change in the reports so that l have the same record selecton being passed from the main report to the subreport record selection based on the BeginDate parameter and the End Date parameter from the main report? Right now, the subreport is selecting all the records in the tables specified.
Have a great day. Any feedback would be greatly appreciated.
Thanks,
Ting

Hi Jason,
   Thanks for replying to my posting. It's been awhile since I've worked on Crystal Reports so I'm getting reacquainted with sub-reports again.
    By linking the main report to the subreport by the BeginDate and BeginEnd parameters, will the date parameters be passed from the main report to the record selection for the subreport?
   Also by doing your approach when the user is prompted to run the report, will it display on the popup window four date parameters: the BeginDate and EndDate from the main report and underneath that the BeginDate and EndDate from the sub report? If so I'm trying to avoid that because it would be the same date range that I'm wanting to use for the main report and the subreport.
    I hope that made sense.
Thanks,
Ting

How to pass GET parameters from BPEL to webservice?

Hi,
How can I pass GET parameters to webservice from BPEL. For example if a webservice expects to get 2 parameters as GET parameters like the following URL:
http://xxx.xxx.xxx.xxx/some-web-service?parama=abc&paramb=123
How can I pass parama and paramb to the webservice call?
Thanks,
Ronen

Hello Ronen,
Im assuming that you're using SOA Suite 11g. The developer guide describes the following: http://docs.oracle.com/cd/E29505_01/dev.1111/e10224/sca_bindingcomps.htm#CHDEEGDC
And the following blogpost explains in detail how to implement https://blogs.oracle.com/reynolds/entry/oracle_http_adapter
Good luck!
Melvin

How do I monitor parameters from a SubVI on the front panel of the main VI?

Good day. I have a LabView program that I am modifiying (actually it is a National Instruments demo program called Simple PID Demo). On the Front Panel of the main VI, I need to monitor several parameters that are on a SubVI. How do I do this?
Thank you very much for your time and help.
Michael

Hi Michael,
Global Variables should solve your problem.
Looks like you have to pass values from Sub VI that will execute continously inside a main vi.
Look at attached VI
Hope you can implement this type of logic in your program.
regards
Dev
Attachments:
Main_1.llb ‏53 KB

How to pass a parameter from a report to multiple forms in the same page

Hi:
i have a report and a lot of forms in the same page. The fact is that i want to stablish a link over a filed in the report which would make some information appear in those forms so that information could be updated. For example: i have a report with company names. Over those names i want to put a link. When the link would be pressed the forms would reflect the information about that comany. Is this possible to be done? how can i do this or something similar?
Thanks.
Regards. Urko.

Please see post Re: session state security
It has been done for a single form in a page and can be extended to multiple forms as well.

How to pass multiple parameters from jsp to servlet using iframe

function updGrade(grd,actDetID,sID)
updateFrame.location="/clucas/updateServ?s_id="+sID.value+" &act_ID="+actDetID.value+" &grade="+grd.value+";
hi, i have this javascript on my jsp and try to send those three params to updateServ servlet inorder to update a grade value to database, but for some reasons it does not work. It is only work when I pass one parameter only.
Can anybody help me with this please?
thanks

You have spaces before the & signs. They can't be there:
function updGrade(grd,actDetID,sID)
updateFrame.location="/clucas/updateServ?s_id="+sID.value+
"&act_ID="+actDetID.value+
"&grade="+grd.value;
}

How to pass a value from jspx page to the managed bean

hi,
i have created a jspx page and manages bean with page flow scope..
in my jspx page i am searching a employee record from the data base . and getting entire employee details including 'status' as a search result.
here i want to pass the value of 'status ' field to the managed bean variable called 'stval'.
can anybody suggest any solution?.......

As per the details provided in the post above, when the user clicks on the search in the af:query, the results are populated in the table. And you are interested in getting the value of particular column. This could be done by having the custom row selection listener to get the value of the current row (selected row in the table).
1) Have a custom selection listener:
<af:table value="#{bindings.EmpDeptVO.collectionModel}" var="row"
rows="#{bindings.EmpDeptVO.rangeSize}"
emptyText="#{bindings.EmpDeptVO.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.EmpDeptVO.rangeSize}"
rowBandingInterval="0"
rowSelection="single" id="t1"
partialTriggers=":::qryId1 ::ctb1 ::commandToolbarButton1"
columnStretching="column:c1"
styleClass="AFStretchWidth" columnSelection="multiple"
first="0" contentDelivery="immediate" autoHeightRows="10"
binding="#{pageFlowScope.ExampleBean.searchResultsTable}"
*selectionListener="#{pageFlowScope.ExampleBean.rowSelected}">*
2) In the method, set the current row programmatically:
ADFUtil.invokeEL("#{bindings.EmpDeptVO.collectionModel.makeCurrent}",
new Class[] { SelectionEvent.class },
new Object[] { selectionEvent });
3) Get the current row and get the required attribute values and set it in any of the variables in the managed bean:
Row selectedRow =
(Row)ADFUtil.evaluateEL("#{bindings.EmpDeptVOIterator.currentRow}");
String status = selectedRow.getAttribute("Status");
Thanks,
Navaneeth

How to pass Key Event from command prompt to the java application

If iam running a application that displays JFrame when i pressed CTR+C at the command prompt i.e console window please let me know how can it be passed to the JFrame ie application window

I doubt that you can pass Ctrl+C to the application since the application is terminated by this key combination.
You would try adding a WindowListener or may use a shutdown hook to capture the termination of the JVM.

How to summarize a field from main window at the bottom

I've a requirement in sapscript which is driven by standard program RVADOR01 to print certain quotation details.There is a field called tax code(kbetr) which
is required to be displayed for each line item .
Now i've also to summarize these tax code at the bottom of the page in another window.Here is the scenario
In MAIN window:
kbetr
1     for 1st line item
1     for 2nd line item
2     for 3rd line item
1     for 4th line item
3     for 5th line item
2     for 6th line item
It have to summerise above tax code in FOOTER window as:
kbetr
1
2
3

Hi anutosh,
1. First check out if summary variables
   are already available in the standard drive program or not.
2. Further to this, the TEXT ELEMENTS
for printing the summary should also be available.
3. This all logic / sequence of printing
   is absolutely
   contained in the driver program.
4. If its not there,
   then probably u will have to
   copy the driver program,
   and do some enhancements/modifictiions.
5. I don't think, by simply manipulating
   the sapscript layout, we can achieve this directly.
regards,
amit m.

How to pass tables data from SAP script to the routine.

Hi,
I have standard program RPCTEAL0_01 which calls a SAP script form(Custom) to print the form.
Now I have to add some additional functionality to change the values in the form. Since it is custom form I can add ROUTINE and then pass the values to the custom program to modify the variables.
My concern here, I would like to pass the tables like RT,CRT to the custom program via form.
Is this possible? RT and CRT filled by standard progam.
Regarsd
Eswar
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Jan 20, 2009 9:06 AM

Hi, The suggested option is not working.
Actually I am using the below code in SCRIPT
/:   PERFORM CAL_2008 IN PROGRAM ZHR_TEST1
/:   USING &PER_NO&
/:   CHANGING &W12&
/:   ENDPERFORM
and calling form in ZHR_TEST1. But this will pass only variables. Now my requirement is to pass tables also.

Passing values from main report to sub-reports

- How do we pass values from main report to sub-report?

Look at this link which shows how to pass values from a subreport to a main report.
http://www.datamanagementgroup.com/resources/trainerstalk/trainerstalk_howto_share_subreport_data_with_main_report.asp
You can use the same method to pass values from main report to a subreport.
1) Create a formula @mainFormula in the main report, as given in item 1 of link.
2) Place this formulla in a suppressed report footer section above the target subreport.
3) In the subreport, create a formula @subFormula that declares the same variable name, as given in item 3 of link.
4) Place @subFormula column in the subreport where you want to display it.

Passing Multivalued parameter to sub report in SSRS

Hi Team,
I tried passing multi valued parameter to sub report in SSRS but the report is blank.
Rgds,
Shree

Hi Shree,
As per my understanding, the issue is caused by the multiple-value parameters are not passed from the main report to the subreport correctly. Please refer to the steps below to check whether you configure the subreport parameter settings correctly:
Drag a Subreport control from toolbox to design surface.
Right-click the Subreport to open the Subreport Properties dialog box, then select the correct report as subreport.
Click Parameters in the left pane.
Add parameters as below (Parameter1 is a single-value parameter, Parameter2 is a multi-value parameter in subreport ):
Name: Parameter1 Value: [@ReportParameter1]
Name: Parameter2 Value: =Split(join(Parameters!ReportParameter2.Value,","),",")
Please also directly select or type the same values in subreport to check whether the subreport works well with those parameter values.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Pass Checkbox Parameters from HTML Form to a stored procedure

I'm still looking for a solution to my forms problem. FYI, I'm not using Applications Express to build my application--I'm using straight PL/SQL. I need to know how to pass checkbox parameters from my Web form. I'm allowing folks to select one or more checkboxes on a form that will call a delete function to delete the selected records. What I read in Oracle's "Database Application Developer's Guide - Fundamentals" isn't helpful to me. If someone would point me to some examples, maybe I could see what I'm doing wrong. Here's what was written in "Database Application Developer's Guide - Fundamentals":
All the checkboxes with the same NAME attribute make up a checkbox group. If none of the checkboxes in a group is checked, the stored procedure receives a null value for the corresponding parameter.
If one checkbox in a group is checked, the stored procedure receives a single VARCHAR2 parameter.
If more than one checkbox in a group is checked, the stored procedure receives a parameter with the PL/SQL type TABLE OF VARCHAR2. You must declare a type like this, or use a predefined one like OWA_UTIL.IDENT_ARR. To retrieve the values, use a loop:
CREATE OR REPLACE PROCEDURE handle_checkboxes ( checkboxes owa_util.ident_arr )
AS
BEGIN
FOR i IN 1..checkboxes.count
LOOP
htp.print('<p>Checkbox value: ' || checkboxes(i));
END LOOP;
END;
SHOW ERRORS;

I'm not sure I understand what your issue is.
If your web form has the following checkboxes defined all with the same name:
<input type="checkbox" name="attrib" value="1">one</input>
<input type="checkbox" name="attrib" value="2">two</input>
<input type="checkbox" name="attrib" value="3">three</input>Then you would create and register a procedure to handle the form submission that has a parameter with the name attrib of type owa_util.ident_arr e.g.:
create or replace procedure handle_form(attrib owa_util.ident_arr) as
iter number;
begin
for iter in attrib.first .. attrib.last loop
    -- do something with attrib(iter)
end loop;
end;
/Now the one problem with this handler (or any form handler for that matter) is that if the user selects none of the check boxes, or no value for any of the expected parameters, the handler would be called with some parameters missing or with out any parameters passed to it, and the call will error out.
To get around that you need to provide default values for all the parameters passed to your handler including the ident_arr parameters, however with ident_arr parameters that's difficult to do with standalone procedures. If you place your procedure in a package you can define package level variables of the appropriate types that can be used as default values:
create or replace package my_web as
empty_arr owa_util.ident_arr;
procedure handle_form(attrib owa_util.ident_arr := empty_arr);
end my_web;
create or replace package body my_web as
procedure handle_form(attrib owa_util.ident_arr := empty_arr) as
    iter number;
begin
    for iter in attrib.first .. attrib.last loop
      -- do something with attrib(iter)
    end loop;
end;
end my_web;
/now when you hit the situation where the user doesn't select any check boxes, the call to handle_form won't err out due to missing parameters, and the empty_arr won't have any elements to iterate over so the loop in the procedure body will be fine and you will be able to retrieve each selected check box value from the attrib array when you iterate over it.

How to pass an object from jsp to other jsp using SendRedirect

How to pass an object from one jsp to the other jsp using ssendRedirect with out using the session
I am having 2 jsps
x.jsp and y.jsp
From x.jsp using sendRedirect iam going to y.jsp
From x.jsp i have pass an object to the y.jsp
Is it possible without putting the object in session
Is it possible using EncodeUrl
Please help me Its Urgent

Is it possible without putting the object in sessionAnything is possible. Would you accept that it is very difficult?
When you send a redirect, it tells the browser to send a new request for the target page. That means any request parameters/attributes are lost.
Is it possible using EncodeUrl response.encodeURL() puts the session id into a url if the browser does not support cookies. It is purely for retaining the session.
There are two ways that you can communicate across a sendRedirect.
1 - use the session
2 - pass a parameter in the url.
parameters are string based, so passing objects is almost out of the question.
Potentially you could serialize your object, encode it in base64 (so it is composed completely as characters) and pass it as a parameter to the other page, where you retrieve it, unencode it, and then load the serialized object.
Or you can just use the session.

One or mor parameters were not specified for the subreport

I have a main report that has a sub report. It all seems to work fine, except that I get the error "One or mor parameters were not specified for the subreport" when the second page of the report is rendered. So I verifed that all the
parameters for both reports are setup correctly, looked at the data to see if it that was causing the issue, etc.... I found nothing.
Then I came across this article.
http://www.analyticsby.me/2009/10/one-or-more-parameters-were-not_09.html
So I changed all the parameters on the sub report Available Values to none. Now it works without issues.
My problem is that the sub report needs to be run independently. By setting the Available Values to none, the user is unable to select values for the parameters. This is not acceptable.
I suppose I could create a duplicate report to use as the sub report, with all the Available Values set to none for the parameters, but that means I need to maintain two reports instead of one.
This has to be a bug.
Anyone come across this situation?
Bill Behning

Hi Bill,
Sorry for the delay.
Based on my test, the error message hints that either the report parameter has not been passed from the main report to the subreport or that the wrong format of report parameter or an unacceptable value for the report parameter has been passed from the main
report to the subreport.
When passing the parameter from the main report to subreport, we can grant the parameter to Available values in the subreport. While the values passed should be contained by Available values of the parameter in the subreport. In this case, the error won't occur.
In other words, the parameter in the subreport can contain Available values.
If I have any misunderstanding, please feel free to contact me.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

How to pass Multivalue parameters from main report to the subreport to a database stored procedure

Similar Messages

Maybe you are looking for