How to pass Key Event from command prompt to the java application

If iam running a application that displays JFrame when i pressed CTR+C at the command prompt i.e console window please let me know how can it be passed to the JFrame ie application window

I doubt that you can pass Ctrl+C to the application since the application is terminated by this key combination.
You would try adding a WindowListener or may use a shutdown hook to capture the termination of the JVM.

Similar Messages

  • How to pass Multivalue parameters from main report to the subreport to a database stored procedure

    I am having a Main Report, where the user selects the parameters, and calls the subreport which in turn calls the stored proc which updates the report parameters table, which will be used by all the other sub reports to filter data on.
    It works fine when I pass single values from the Main report to the sub report, and it updates the database, but when I map the formula field to the subreport, the subreport does not even show up, and nothing happens on the database. I am thinking the subreport is not executing. I am using the 'Change Subreport Links' to map the formula fields to the subreport parameters.
    Please let me know if there is any other work around or a sample report which solves a similar problem.

    That is definitely a problem. CR 11.0 has been out of support for 5+ years(?). CR 11.5 has been out of support for close to 3 years.
    As far as I am concerned, the suggestions given here are going for naught as presumably they are based on recent builds of CR (E.g.; CR 12.x or higher). I really doubt that Abhilash or Jamie remember if CR 11.0 had problems related to the issue at hand. But they do know that their suggestions work in current versions of CR.
    Thus a suggestion; I suspect that you should be able to obtain an image from your IT where you can install CR 11.0 and update it to CR 11.5. Then use this as a proof of concept to the powers that be in your org that it is time to get with the times. BTW.; the most current version of CR is CR 2013, version 14.1.x(!). Again, something that your org should be aware of. So, even better than updating the image to CR 11.5, download the free 30 day eval of CR 2013 and try the suggestions in that version. The eval download is here:
    SME Free Trials | SME Software | SAP
    BTW.; CR 2013 is a side by side install, meaning that it will happily co-exist with your current CR 11.0 install.
    - Ludek

  • How to pass an event from WDY appl to surrounding  HTML viewer

    Hi Experts,
    This is a very special issue that i finally gave up after some days,
    but hope to get new ideas or solutions from you.
    Situation:
    We extended the standard search helps to use an own one.
    Ours is calling a popup witzh nothing on then a HTMl viewer.
    Depending on the context we are then showing a WebDynpro Search application in that frame.
    Issue:
    After selecting a result, we need to get control back to the HTML viewer or popup
    in the surrounding abap runtime to go on in the original process.
    I could not find anything to do this
    Things i tried:
    - asnycronous timer with callback -> failed as callbacks calling the CFW dump( nodialog assigned)
    - Portal eventing -> failed, in many cases there is no portal and the events dont get passed
    - suppressing dialog on popup -> failed, things dont get displayed at all (automation queue has an issue)
    - Leaving to list processing combined with asyncronous timer ->failed, refresh ignored by system
    If anyone has an idea - would be great.
    Thanks in advance,
    Marcel

    This may help:
    http://www.meangene.com/java/javascript/javascript.html
    Its a bit out-dated works.
    Here is a working demo:
    http://membres.lycos.fr/gamondes/demos/liveConnect_eng.html
    Peter

  • How do I move Events from one user to the other?

    I have two users on my PowerBook G4 and in preparation of moving all to a new MacBook Pro I want to move the pictures of one user to the other user. I've tried copying them and was successful but the Events did not copy, rather all 530 photos copied as one Event. How do I copy the photos and maintain the Events?

    iPhoto Library Manager is recommended on here many times every day. I can't recall anyone mentioning a significnt issue with it.
    Regards
    TD

  • How to pass a value from jspx page to the managed bean

    hi,
    i have created a jspx page and manages bean with page flow scope..
    in my jspx page i am searching a employee record from the data base . and getting entire employee details including 'status' as a search result.
    here i want to pass the value of 'status ' field to the managed bean variable called 'stval'.
    can anybody suggest any solution?.......

    As per the details provided in the post above, when the user clicks on the search in the af:query, the results are populated in the table. And you are interested in getting the value of particular column. This could be done by having the custom row selection listener to get the value of the current row (selected row in the table).
    1) Have a custom selection listener:
    <af:table value="#{bindings.EmpDeptVO.collectionModel}" var="row"
    rows="#{bindings.EmpDeptVO.rangeSize}"
    emptyText="#{bindings.EmpDeptVO.viewable ? 'No data to display.' : 'Access Denied.'}"
    fetchSize="#{bindings.EmpDeptVO.rangeSize}"
    rowBandingInterval="0"
    rowSelection="single" id="t1"
    partialTriggers=":::qryId1 ::ctb1 ::commandToolbarButton1"
    columnStretching="column:c1"
    styleClass="AFStretchWidth" columnSelection="multiple"
    first="0" contentDelivery="immediate" autoHeightRows="10"
    binding="#{pageFlowScope.ExampleBean.searchResultsTable}"
    *selectionListener="#{pageFlowScope.ExampleBean.rowSelected}">*
    2) In the method, set the current row programmatically:
    ADFUtil.invokeEL("#{bindings.EmpDeptVO.collectionModel.makeCurrent}",
    new Class[] { SelectionEvent.class },
    new Object[] { selectionEvent });
    3) Get the current row and get the required attribute values and set it in any of the variables in the managed bean:
    Row selectedRow =
    (Row)ADFUtil.evaluateEL("#{bindings.EmpDeptVOIterator.currentRow}");
    String status = selectedRow.getAttribute("Status");
    Thanks,
    Navaneeth

  • How to pass tables data from SAP script to the routine.

    Hi,
    I have standard program RPCTEAL0_01 which calls a SAP script form(Custom) to print the form.
    Now I have to add some additional functionality to change the values in the form. Since it is custom form I can add ROUTINE and then pass the values to the custom program to modify the variables.
    My concern here, I would like to pass the tables like RT,CRT to the custom program via form.
    Is this possible?  RT and CRT filled by standard progam.
    Regarsd
    Eswar
    <MOVED BY MODERATOR TO THE CORRECT FORUM>
    Edited by: Alvaro Tejada Galindo on Jan 20, 2009 9:06 AM

    Hi, The suggested option is not working.
    Actually I am using the below code in SCRIPT
    /:   PERFORM CAL_2008 IN PROGRAM ZHR_TEST1
    /:   USING &PER_NO&
    /:   CHANGING &W12&
    /:   ENDPERFORM
    and calling form in ZHR_TEST1. But this will pass only variables. Now my requirement is to pass tables also.

  • How to Get Input from Command Prompt?

    How can i get input from command prompt like
    C:\
    or linux ?
    (Here's what I use now)
    BufferedReader in = new BufferedReader(new InputStreamReader(System.in));
    String line;
    Whlie((line=in.readLine())!= null)
    { System.out.prinln( line) ; }
    IS THERE A BETTER WAY?

    The main method within a java class accepts command line input through a String array.
    In this example args is the String array. You can access the parameters as args[0] for the first parameter, args[1] for the second parameter, etc....
    The usage for the example below would be :
    c:\EDIFormat file1 file2
    Where args[0] would equal file1 and args[1] would equal file2.
    public class EDIFormat {
    public static void main(String[] args) {
              if (args.length < 0) {
                   System.out.println("No Parameters supplied. Exiting....");
                   // open input and output files
                   EDIFiles(args[0], args[1]);
    Hope that helps!

  • How to run form from command prompt

    Hi,
    How to run a form from command prompt
    can anybody suggest me the way
    prasanth a.s.

    Well, if you are running windows, client server forms 6i, and your form is called 'myform', you could put this into a batch file :-
    start ifrun60 module=myform

  • Can't create database from command prompt

    I am using Oracle 9i over Win XP. I can create new database using OEM wizard without any problem. However, when I try to create new database from command prompt, using following commands, I get an error.
    sqlplus /nolog
    connect / as internal (when I issue this I get message TNS no listener)
    CONNECT SYS/password AS SYSDBA (can't understand how to use this, I don't have password because I've not created the database)
    Can anyone help me how to create new database from command prompt?
    Thanx

    "TNS No Listener" => Start the listener
    To be connected as SYSDBA you dont need a password if your are logged in the DBA group, you just have to :
    PROD_:id
    uid=102(oracle) gid=103(oinstall)
    PROD_:sqlplus "/ as sysdba"
    SQL*Plus: Release 8.1.7.0.0 - Production on Wed Jul 23 11:46:50 2003
    (c) Copyright 2000 Oracle Corporation. All rights reserved.
    Connected to:
    Oracle8i Enterprise Edition Release 8.1.7.4.0 - Production
    With the Partitioning option
    JServer Release 8.1.7.4.0 - Production
    SQL> show user
    USER is "SYS"
    SQL>
    Fred

  • Compiling form from  command prompt...

    hi all,,
    Can any one tell me, :how to compile a form
    from command prompt..
    It would be appreciable if i can get an answer for this...
    Thanks and regards.

    You could use ORACLE_HOME\bin\ifcmp90.exe ........ (for 9i/10g) or ORACLE_HOME\bin\frmcmp.exe....... (for 10gR2).
    with the option batch=yes

  • Not able to start managed server from command prompt

    Hi,
    I am trying to start manged server from command prompt. The command i am using is as follows:
    startManagedWebLogic.cmd MS1 [http://]&lt;Listen_Address&gt;:&lt;Admin_port&gt;
    Where MS1 is the name of my managed server.
    But i am getting following exceptions:
    There are 1 nested errors:
    weblogic.management.ManagementException: Unable to obtain lock on C:\bea\user_pr
    ojects\domains\PB530Domain\servers\AdminServer\tmp\AdminServer.lok. Server may a
    lready be running
    at weblogic.management.internal.ServerLocks.getServerLock(ServerLocks.ja
    va:159)
    at weblogic.management.internal.ServerLocks.getServerLock(ServerLocks.ja
    va:58)
    at weblogic.management.internal.DomainDirectoryService.start(DomainDirec
    toryService.java:73)
    at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesMan
    ager.java:459)
    at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServ
    icesManager.java:164)
    at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:711)
    at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:482)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:440)
    at weblogic.Server.main(Server.java:67)
    >
    <Feb 10, 2009 6:48:16 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server sta
    te changed to FAILED>
    <Feb 10, 2009 6:48:16 PM IST> <Error> <WebLogicServer> <BEA-000383> <A critical
    service failed. The server will shut itself down>
    <Feb 10, 2009 6:48:16 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server sta
    te changed to FORCE_SHUTTING_DOWN>
    Please help me to resolve this issue.
    thanks,
    Sonal
    Edited by: [email protected] on Feb 10, 2009 5:16 AM

    Looking at your error message a little closer, I don't believe it has anything to do with port conflicts but rather that even though you are executing the startManagedWeblogic.cmd with your managed server name (MS1), the error indicates that it is trying to start the Admin Server (not MS1). Note in your error message the following: Unable to obtain lock on C:\bea\user_pr
    ojects\domains\PB530Domain\servers\AdminServer\tmp\AdminServer.lok. Server may a
    lready be running
    It is saying that it cannot start the Admin Server because it is already running (which is probably true in your case). Have you made any changes to the startManagedWeblogic.cmd or the startWeblogic.cmd scripts? I would start debugging there and try to figure out why the script is trying to start your admin server instead of MS1 as you requested on the cmd line.

  • How to pass an object from jsp to other jsp using SendRedirect

    How to pass an object from one jsp to the other jsp using ssendRedirect with out using the session
    I am having 2 jsps
    x.jsp and y.jsp
    From x.jsp using sendRedirect iam going to y.jsp
    From x.jsp i have pass an object to the y.jsp
    Is it possible without putting the object in session
    Is it possible using EncodeUrl
    Please help me Its Urgent

    Is it possible without putting the object in sessionAnything is possible. Would you accept that it is very difficult?
    When you send a redirect, it tells the browser to send a new request for the target page. That means any request parameters/attributes are lost.
    Is it possible using EncodeUrl response.encodeURL() puts the session id into a url if the browser does not support cookies. It is purely for retaining the session.
    There are two ways that you can communicate across a sendRedirect.
    1 - use the session
    2 - pass a parameter in the url.
    parameters are string based, so passing objects is almost out of the question.
    Potentially you could serialize your object, encode it in base64 (so it is composed completely as characters) and pass it as a parameter to the other page, where you retrieve it, unencode it, and then load the serialized object.
    Or you can just use the session.

  • How to search specific text/string in pdf files from command prompt?

    Hi,
    How to search specific text/string in pdf files from command prompt?
    Will be great if you can refer to any adobe provided command base utility to achieve the above target.
    Best Regards,

    You can't. The commandline parameters for Acrobat and Adobe Reader do not allow any type of commands to be run.

  • How to run non-customised report from command prompt to gen trace file?

    Hi
    how to run non-customised report from command prompt to gen trace file?
    EBS R12 RUP6.
    RHEL5
    rgrds

    Hi,
    See (Note: 285497.1 - Rwrun.sh Does Not Generate Trace Output Using TRACEOPTS in Command Line) and/or (Note: 737445.1 - R12 Concurrent Requests Run Forever; rwrun Errors REP-50125) for the command you need to use.
    Thanks,
    Hussein

  • How to pass events from subpanel(s) to the main VI ?

    hi all,
    I found a lot of solutions to pass the events from the main VI to the subpanel(s) but none about passing the events from subpanel(s) to the main VI. In the attached VIs, I just want to generate an event in the main_VI.vi when I click on the button positionned in the subPanel1.vi. How can I do that ?
    thanks.
    Cedric
    Attachments:
    main_VI.vi ‏13 KB
    subPanel1.vi ‏6 KB

    Cedric,
    You could use a queue to transfer the button data to your main vi.
    See the attached files:
    subPanel1mod - Detects a button change and Enqueues the state.
    main_VI mod - uses the Timeout event to poll for data in the queue.
    main_VI mod1 - gets the queue data without having to poll.
    Like your orginals, these files are in LV2010.
    steve
    Help the forum when you get help. Click the "Solution?" icon on the reply that answers your
    question. Give "Kudos" to replies that help.
    Attachments:
    subPanel1mod.vi ‏10 KB
    main_VI mod.vi ‏16 KB
    main_VI mod1.vi ‏15 KB

Maybe you are looking for

  • Can no longer do a hot reboot on New iPad. Very concerned.

    Although it has worked previously, I just discovered that I am no longer capable of rebooting my New iPad by using the volume control-sleep button combination. I've tried to do this several times and I've held both down for up to 20 seconds but nothi

  • No wireless in NetworkManager

    Hello everyone, I have a problem with my wireless adapter. It has stopped working after i installed "create_ap" package for sharing wifi_connection. Before using 'create_ap' everything was working perfectly. Now i unistalled 'create_ap' but the probl

  • I had a hard drive crash

    I need to reload my acrobat 9

  • Can We sell product type Warranty in the Webshop??

    Hi Gurus, Business requirement is to sell Warranty products (product type: Warranty) in web shop. ie Extended warranty product. As per my knowledge, webshop supports the sales of product type Material and Services. How can we address this?? Regards,

  • Next row in JTable (skip disabled rows)

    When I press the down button on my keyboard how can I move to the next available row. It should skip all disabled rows. My subclass of JTable looks like this: public void changeSelection(int rowIndex, int columnIndex, boolean toggle, boolean extend)