How to pass the User Group for a SQ00 Transaction iView

Hello,
To start off, I am relatively new to SAP technology in general. I may be missing something obvious.
I am trying to create an SAP Transaction iView in our EP Portal that will call the SQ00 transaction (start query) and run a particular query against our R/3 backend. I set the Transaction Code to: SQ00, the application parameters to: RS38R-QNUM=<my query> and the OK Code to: SHOW and the System to the System alias for our R/3 system.
My problem is that the query that I need to run is not in the default User Group that comes up by default. So I get a screen that has the query field (RS38R-QNUM) correctly populated but the error that the query has not been created. From that screen I can navigate to the correct User Group and then run query. There does not seem to be a User Group field on the screen, you change it by accessing a different menu, so I do not know how to call the screen for a particular User Group.
Is their an application parameter that I can initially pass to set the User Group?
Thank you.

And my lecturer is suck, every lectures she just read
the slices and never explains why and how they are.
(If ask her, she talks and talks rubbish and
eventually I get nothing)Maybe you should drop the class and complain to the administration.

Similar Messages

How to find the user exit for a screen..

Hi,
plz help me how to find the user exit for a screen..?
Regards
Anbu

Hi,
check this program this will give you the list of user-exit and BADI for the perticular Tcode.
REPORT zuserexit_badi.
TABLES : tstc,
tadir,
modsapt,
modact,
trdir,
tfdir,
enlfdir,
sxs_attrt ,
tstct.
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
PARAMETERS : p_tcode LIKE tstc-tcode,
p_pgmna LIKE tstc-pgmna .
DATA wa_tadir TYPE tadir.
START-OF-SELECTION.
IF NOT p_tcode IS INITIAL.
    SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
ELSEIF NOT p_pgmna IS INITIAL.
    tstc-pgmna = p_pgmna.
ENDIF.
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
    WHERE pgmid = 'R3TR'
    AND object = 'PROG'
    AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
      WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
        WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
        WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
        WHERE pgmid = 'R3TR'
        AND object = 'FUGR'
        AND obj_name EQ enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
    SELECT * FROM tadir INTO TABLE jtab
    WHERE pgmid = 'R3TR'
    AND object IN ('SMOD', 'SXSD')
    AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
    WHERE sprsl EQ sy-langu
    AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(105) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
      SORT jtab BY object.
      DATA : wf_txt(60) TYPE c,
      wf_smod TYPE i ,
      wf_badi TYPE i ,
      wf_object2(30) TYPE c.
      CLEAR : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
      LOOP AT jtab INTO wa_tadir.
        AT FIRST.
          FORMAT COLOR COL_HEADING INTENSIFIED ON.
          WRITE:/1 sy-vline,
          2 'Enhancement/ Business Add-in',
          41 sy-vline ,
          42 'Description',
          105 sy-vline.
          WRITE:/(105) sy-uline.
        ENDAT.
        CLEAR wf_txt.
        AT NEW object.
          IF wa_tadir-object = 'SMOD'.
            wf_object2 = 'Enhancement' .
          ELSEIF wa_tadir-object = 'SXSD'.
            wf_object2 = ' Business Add-in'.
          ENDIF.
          FORMAT COLOR COL_GROUP INTENSIFIED ON.
          WRITE:/1 sy-vline,
          2 wf_object2,
          105 sy-vline.
        ENDAT.
        CASE wa_tadir-object.
          WHEN 'SMOD'.
            wf_smod = wf_smod + 1.
            SELECT SINGLE modtext INTO wf_txt
            FROM modsapt
            WHERE sprsl = sy-langu
            AND name = wa_tadir-obj_name.
            FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
          WHEN 'SXSD'.
For BADis
            wf_badi = wf_badi + 1 .
            SELECT SINGLE text INTO wf_txt
            FROM sxs_attrt
            WHERE sprsl = sy-langu
            AND exit_name = wa_tadir-obj_name.
            FORMAT COLOR COL_NORMAL INTENSIFIED ON.
        ENDCASE.
        WRITE:/1 sy-vline,
        2 wa_tadir-obj_name HOTSPOT ON,
        41 sy-vline ,
        42 wf_txt,
        105 sy-vline.
        AT END OF object.
          WRITE : /(105) sy-uline.
        ENDAT.
      ENDLOOP.
      WRITE:/(105) sy-uline.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No.of Exits:' , wf_smod.
      WRITE:/ 'No.of BADis:' , wf_badi.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(105) 'No userexits or BADis exist'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
DATA : wf_object TYPE tadir-object.
CLEAR wf_object.
GET CURSOR FIELD field1.
CHECK field1(8) EQ 'WA_TADIR'.
READ TABLE jtab WITH KEY obj_name = sy-lisel+1(20).
MOVE jtab-object TO wf_object.
CASE wf_object.
    WHEN 'SMOD'.
      SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
      CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    WHEN 'SXSD'.
      SET PARAMETER ID 'EXN' FIELD sy-lisel+1(20).
      CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Reagards,
Bharat.

How to pass the USER variable to RPD in 11g?

I am trying to figure out how to pass the USER variable to the RPD in 11g.
In 10g, I had define an intializtion block to store the USER variable and pass it to a statement that has to be executed before the query is executed.
We use the Oracle VPD technology that allows to restrict data access. This is the statement that has to be executed before a query can run.
select vpd_adwh.setclnvpdcontext_fnc('VALUEOF(NQ_SESSION.cuser)', UPPER(:USER))) from dual
That is the 10g version and it works fine.
In 11g, I tried to use
select vpd_adwh.setclnvpdcontext_fnc('VALUEOF(NQ_SESSION.cuser)', UPPER('VALUEOF(NQ_SESSION.USER)')) from dual
but this is not working.
Any help?

any ideas?

How to get the screen groups for the screen field which are on selectionscn

hiiii Experts,
               How to know the screen groups for the screen field which are on selection screen.
Thanks and regards,
kasyap

     NAME                                             PNPABKRS-LOW
        GROUP1                                             SEL
        GROUP2                                             DBS
        GROUP3                                             LOW
        GROUP4                                             180
to get this use this:
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    if screen-name CS 'ABKRS'.
      BREAK-POINT.
    endif.
ENDLOOP.

To find the User Exits for a particular Transaction.

hi,
    I want to find the number of User Exits for a The Transaction MM01 or MM02,
    I serched in the forums but could not find satisfactory ans,
    I tried with:
             T.Code-> System>Status->Prog Name>SE38>find Call Customer-Exit.
    But its not helping me,
    Please help me.
Thanks and Regards
Suraj S Nair.

hi ,
if you are new to user exist use --> follw the below methos to find the user exit for a particular transaction or t-code
create one custom pgm in se38 and execute >selection screenenter t-code and execute it will return all the user exists for a specific transaction..
Finding the user-exits of a SAP transaction code
* Finding the user-exits of a SAP transaction code
* Enter the transaction code in which you are looking for the user-exit
* and it will list you the list of user-exits in the transaction code.
* Also a drill down is possible which will help you to branch to SMOD.
* Written by : SAP Basis, ABAP Programming and Other IMG Stuff
*              http://www.sap-img.com
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
         tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
   select single * from tadir where pgmid = 'R3TR'
                    and object = 'PROG'
                    and obj_name = tstc-pgmna.
   move : tadir-devclass to v_devclass.
      if sy-subrc ne 0.
         select single * from trdir where name = tstc-pgmna.
         if trdir-subc eq 'F'.
            select single * from tfdir where pname = tstc-pgmna.
            select single * from enlfdir where funcname =
            tfdir-funcname.
            select single * from tadir where pgmid = 'R3TR'
                               and object = 'FUGR'
                               and obj_name eq enlfdir-area.
            move : tadir-devclass to v_devclass.
          endif.
       endif.
       select * from tadir into table jtab
                     where pgmid = 'R3TR'
                       and object = 'SMOD'
                       and devclass = v_devclass.
        select single * from tstct where sprsl eq sy-langu and
                                         tcode eq p_tcode.
        format color col_positive intensified off.
        write:/(19) 'Transaction Code - ',
             20(20) p_tcode,
             45(50) tstct-ttext.
                    skip.
        if not jtab[] is initial.
           write:/(95) sy-uline.
           format color col_heading intensified on.
           write:/1 sy-vline,
                  2 'Exit Name',
                 21 sy-vline ,
                 22 'Description',
                 95 sy-vline.
           write:/(95) sy-uline.
           loop at jtab.
              select single * from modsapt
                     where sprsl = sy-langu and
                            name = jtab-obj_name.
                   format color col_normal intensified off.
                   write:/1 sy-vline,
                          2 jtab-obj_name hotspot on,
                         21 sy-vline ,
                         22 modsapt-modtext,
                         95 sy-vline.
           endloop.
           write:/(95) sy-uline.
           describe table jtab.
           skip.
           format color col_total intensified on.
           write:/ 'No of Exits:' , sy-tfill.
        else.
           format color col_negative intensified on.
           write:/(95) 'No User Exit exists'.
        endif.
      else.
          format color col_negative intensified on.
          write:/(95) 'Transaction Code Does Not Exist'.
      endif.
at line-selection.
   get cursor field field1.
   check field1(4) eq 'JTAB'.
   set parameter id 'MON' field sy-lisel+1(10).
   call transaction 'SMOD' and skip first   screen.
*---End of Program
Regards,
Prabhudas

How to find the user-exit for transaction fpp2

Hi experts,
could you help me how can I find the user-exit for transaction fpp2. I tried to after the package, but I did not find it.

Hi,
Use the following program to find user exits of specified code.
*& Tables
TABLES : tstc,     "SAP® Transaction Codes
         tadir,    "Directory of Repository Objects
         modsapt, "SAP® Enhancements - Short Texts
         modact,   "Modifications
         trdir,    "System table TRDIR
         tfdir,    "Function Module
         enlfdir, "Additional Attributes for Function Modules
         tstct.    "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
    WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
       WHERE pgmid    = 'R3TR'
         AND object   = 'PROG'
         AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
         WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
          WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
          WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
          WHERE pgmid    = 'R3TR'
            AND object   = 'FUGR'
            AND obj_name = enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
Find SAP® Modifications
    SELECT * FROM tadir
      INTO TABLE jtab
      WHERE pgmid    = 'R3TR'
        AND object   = 'SMOD'
        AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
      WHERE sprsl EQ sy-langu
        AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(95) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
      WRITE:/1 sy-vline,
      2 'Exit Name',
      21 sy-vline ,
      22 'Description',
      95 sy-vline.
      WRITE:/(95) sy-uline.
      LOOP AT jtab.
        SELECT SINGLE * FROM modsapt
        WHERE sprsl = sy-langu AND
        name = jtab-obj_name.
        FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
        WRITE:/1 sy-vline,
        2 jtab-obj_name HOTSPOT ON,
        21 sy-vline ,
        22 modsapt-modtext,
        95 sy-vline.
      ENDLOOP.
      WRITE:/(95) sy-uline.
      DESCRIBE TABLE jtab.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No of Exits:' , sy-tfill.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'No User Exit exists'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
I executed the above program but there are no user exits for the specified Transaction.
Thanks,
Naveen Kumar.

How to find the user exit for order cancellation

I want to find the user exit for order cancellation. And also to ensure that no one amends the order once the canellation has taken place. The cancellation shall be deemed to be affected only if the vendor has confirmed the acknowledgement of the order cancellation.
I have got a Zreport where this order should not come as open order item.
Please tell me the method of finding the users exit for order cancellation and stop the order from getting modified. And also how to find the tables in which the data has to be updated that the order has to be cancelled.
In the PO header i want an additional tab <cancellation> by which the user by the help of userid and password should be able to cancel the order. An order once cancelled cannot be undone. A new order has to be placed. The new order can be placed refencing the cancelled purchased order.
My client has got a very stringent requirement. In the past cancelled order has been undone and caused lot of problems.
Regards.

hi
pls tell me t.code so that i will send all user exits related to that particular t.codes
Thanks & Regards
phaneendra

How to find the user exit for infotype 2013 ?

Hi All,
How to find the user exit in infotype 2013? i want to change the drop down list default value in infotype 2013.
Thanks,
Srikanth P

reward points if useful
User exit name is PBAS0001.
code should be written in ZXPADU01 for PBO
ZXPADU02 for PAI.

How to pass current user credential for PAPI service execution

Hi All,
As per my requirement I am using the SAP ME PAPI WS to start the SFC. I have used the SAPME PAPI Interface action block in ME within BLS and searched the service and operation also. Required input parameter mapping is also done and I have successfully executed the BLS and SFC is started in ME. In SAPME PAPI Interface action block I have used Credential alias which is standard configuration in MEINT for user MESYS.
Now what I have seen is that, in ME the SFC is started by user MESYS. But I want to pass the user who is currently executing. Is there any way to pass the current user credential or session for executing the PAPI service. My final target is to use the BLS in IRPT through Xacute query.
Thanks in Advance
Chandan

Hi Sergiy,
It is only required for Sfc Start operation. It is a generic requirement for all PAPI WS. User ref is not available for all services. I have taken sfc Start operation as an example. But for complete SFC operation there is no user ref. in Request structure. Then what would be our generic way to execute it through current user credential.
Thanks
Chandan

Re : How to find the Account Group for a Customer

hi
i know the Sale Area ( Sales Org,Dist Channel & Division), Company code but when i go to XD01 TO create a Customer it is asking for a Account Group.My Question is how to find the Account Group
& is there any link between Sales Area and the Account Group?
Regards

Hi murali,
      Account group makes the fields in the customer master data as
      1. suppress
      2.req. entry
      3. opt. entry
      4.display
      the above 4 are the radio buttons available.
    Before u create the customer master in XD01.
    you must gothrough the following paths to create xd01
    Img->Fin.Accouting->AccountRec & Account Payable->Master data ->prepare for creating customer master data
                      In the above path
                           I. define account groups
                          In this you cretae your own account group
                            II. create number ranges for customer accounts
                            In this maintain any number range
                           III.Assign number ranges to customer account group
                            in this Assign the number range here.
Now go for XD01
select the account group you created.
Give the customer number,this number must be in the range that u made in the above II point.

How to find the customer exits for a particular transaction

hi
how to find the customer exits for a particular transaction

Hi jyothsna vankadari ,
ther is a convenient way to find all BADIS called. You may know that BADIS are the newer version of EXITs.
I would suggest you to go for BADI.
Follow the below steps to find out what all BADI's are called when you press any button in any transaction.
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
Now
4) Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any transaction.
Regards,
Clemens

How to find the user exit for the T-code 'RECN'

Hi friends,
I have a requirement as-
In 'General Data with Fast Entry' tab of tcode 'RECN' there are 2 fields as contract conclusion date and contract end date.
Now, the requirement is as if entered contract end date is less than contract conclusion date then we have to display a warning message as "contract end date cannot be less than contract conclusion date".
So, how to find the right user exit to enter the code.
Plz help me.I will surely reward points.
Thanks,
Rishi

Hi Rishi,
If User exits and BAdi's are not provided, then you will for Enhancement points.
Procedure:
When you are in a particular transaction, Go to System--> status and you find the standard program of that particular screen. Go to SE38 and give that program name, display mode.
After that you click on the spiral icon there onthe top. Then,
You go to menu bar, Edit> Enhancement opitons> show implicit enhancement options.
You will be shown the points where you need to write the code.
For creating it you will go to Edit > Enhancement opitons> Create.
By this you will add some code in the standard programs.
Reward points if it helps you.
Cheers,
Swamy Kunche

How to track the user name for audit trail ?

Hi all,
I chance the new user name from existing user code, How can i track the document that made by the old user name and the current username. Because when the username change, all the historical will be changed to the current.
Thanks in advance
Regards
Jia shun

Hi ,
the problem is usersign is only connect to userid of OUSR. And the changes is on User Name field.
For example know i make a document PO by using user code manager , user name Jason Butler.
After that i change my user name become Alex, but the user code still same "manager".
After that i re-login and update the Qty in PO doc, that i made before. After that i change again the username, the user code still same. After that i click the show history of the document that i made before. The Updated by and created by are always followed by the current user name that i change.
thanks and regards
Jia shun

How to pass the standard value for the entire datapackage in the routine

Hi Gurus,
I have timestamp field in the target. In endroutine , i assigned system date to the tiemstamp field . If i assign sy-datum to that field, if i get 4 datapackage im getting 4 different timestamp for each of the datapackage...
But my requirement is the timestamp should not vary for each of the datapackage.
For eg.
Timestamp
20111212060205 - Datapackage 1
20111212060602 - Datapackage 2
But i need as
Timestamp
20111212060205 - Datapackage 1
20111212060205 - Datapackage 2
How to pass it?
Thanks in advance

you can use tvarv table.
if the datapackage number = 1,
use the current timestamp
overwrite the existing entry in tvarv.
else
use timestamp of tvarv

How to design the user interface for Indesign cs6 plugin ?

Designing user interface using custom c++ library(SDK) for pluging is very tedious work .so when I search the net than i found that we can do it using Adobe Creative Suite Extension Builder but i dont know how to use it to develop user interface for plugin and to how to enable event handling in this UI .I read lots of document regarding this on net but they all created lots of confusion in my mind so can anyone help me to know steps which i must follow to develop plugin using this or whatever technology (action script,java script etc)

If you want to develop Extensions using Creative Suite Extension builder then i think this is not the right forum for you. Please post your specific queries regarding this at the below mentioned link
http://forums.adobe.com/community/creativesuites/cs_sdk
To give a brief of how to develop UI using JS you can use ScriptUI to develop your UI, it is a fast and OS independent approach to UI development. The UI created using JS is native in look. You can refer the following link for some help on ScriptUI
http://www.kahrel.plus.com/indesign/scriptui.html
I don't have much info regarding development in CS SDK, but i can point you to one more direction of dev called as hybrid plugins wherein the UI is created in CS SDK, and appropriate methods are exposed from the C++ plugin(enhancing the script object model) to be called up by the CS code for too and fro communication between these two modules of code.
Hope these pointer help you in getting started.
Thanks,
-Manan

How to pass the User Group for a SQ00 Transaction iView

Similar Messages

Maybe you are looking for