How to track the user name for audit trail ?
Hi all,
I chance the new user name from existing user code, How can i track the document that made by the old user name and the current username. Because when the username change, all the historical will be changed to the current.
Thanks in advance
Regards
Jia shun
Hi ,
the problem is usersign is only connect to userid of OUSR. And the changes is on User Name field.
For example know i make a document PO by using user code manager , user name Jason Butler.
After that i change my user name become Alex, but the user code still same "manager".
After that i re-login and update the Qty in PO doc, that i made before. After that i change again the username, the user code still same. After that i click the show history of the document that i made before. The Updated by and created by are always followed by the current user name that i change.
thanks and regards
Jia shun
Similar Messages
-
How to change your user name for the Ipod nano...
Can anyone please explain how to change the user name on your Ipod nano?
hiya!
do you mean the nano's name in the ipod source list?
if so, select the ipod in the itunes sourcelist. click on it once, and pause for a second or so. you should then be able to type in what you please.
love, b -
Question on how to Hide the User Name, Password, and Domain fields in the MDT Wizard
MDT 2012 U1
Deploying Windows 7 via Offline Media (ISO) to MS Virtual PC's
I am looking on how to Hide the User Name, Password, and Domain fields which are prepopulated in the MDT wizard via the CS.ini (Not so concerned about the Domain field as I am User Name and Password)
We do need the Computer Name and OU fields to be seen, so skipping the wizard is not a option
The client just does not want these fields to be seen by the end users, they dont want them to even know the account name used for adding the machine to the domain, of course the password is not displayed but it must not be displayed either.
But since we use the fields they must still be fuctional just not seen.
Thanks.....
If this post is helpful please click "Mark for answer", thanks! Kind regardsYou shouldn't have to edit DeployWiz_Definition_ENU.xml. You should only need to add "SkipAdminPassword=YES" to the CS.ini file and your authentication information.
Example:
[Settings]
Priority=Default
Properties=MyCustomProperty
[Default]
OSInstall=Y
SkipCapture=NO
SkipAdminPassword=YES
UserID=<MyUserID>
UserPassword=<MyPassword>
UserDomain=<MyDomain.com>
SkipProductKey=NO
SkipComputerBackup=YES
SkipBitLocker=NO
-Nick O.
Nick,
SkipAdminPassword=YES is for:
You can skip the Administrator Password wizard page by using this property in the
customsettings.ini.
I am hidding the Username/Password/and domain field in the computer name Wizard pane which is read from the cs.iniDomainAdmin=xxxxx
DomainAdminPassword=xxxxx
DomainAdminDomain=xxxxxx
JoinDomain=xxxxxx
If this post is helpful please click "Mark for answer", thanks! Kind regards -
How to find the user exit for a screen..
Hi,
plz help me how to find the user exit for a screen..?
Regards
AnbuHi,
check this program this will give you the list of user-exit and BADI for the perticular Tcode.
REPORT zuserexit_badi.
TABLES : tstc,
tadir,
modsapt,
modact,
trdir,
tfdir,
enlfdir,
sxs_attrt ,
tstct.
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
PARAMETERS : p_tcode LIKE tstc-tcode,
p_pgmna LIKE tstc-pgmna .
DATA wa_tadir TYPE tadir.
START-OF-SELECTION.
IF NOT p_tcode IS INITIAL.
SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
ELSEIF NOT p_pgmna IS INITIAL.
tstc-pgmna = p_pgmna.
ENDIF.
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name EQ enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
SELECT * FROM tadir INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object IN ('SMOD', 'SXSD')
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(105) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
SORT jtab BY object.
DATA : wf_txt(60) TYPE c,
wf_smod TYPE i ,
wf_badi TYPE i ,
wf_object2(30) TYPE c.
CLEAR : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT jtab INTO wa_tadir.
AT FIRST.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Enhancement/ Business Add-in',
41 sy-vline ,
42 'Description',
105 sy-vline.
WRITE:/(105) sy-uline.
ENDAT.
CLEAR wf_txt.
AT NEW object.
IF wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
ELSEIF wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
ENDIF.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 sy-vline,
2 wf_object2,
105 sy-vline.
ENDAT.
CASE wa_tadir-object.
WHEN 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE modtext INTO wf_txt
FROM modsapt
WHERE sprsl = sy-langu
AND name = wa_tadir-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WHEN 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
SELECT SINGLE text INTO wf_txt
FROM sxs_attrt
WHERE sprsl = sy-langu
AND exit_name = wa_tadir-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
ENDCASE.
WRITE:/1 sy-vline,
2 wa_tadir-obj_name HOTSPOT ON,
41 sy-vline ,
42 wf_txt,
105 sy-vline.
AT END OF object.
WRITE : /(105) sy-uline.
ENDAT.
ENDLOOP.
WRITE:/(105) sy-uline.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
DATA : wf_object TYPE tadir-object.
CLEAR wf_object.
GET CURSOR FIELD field1.
CHECK field1(8) EQ 'WA_TADIR'.
READ TABLE jtab WITH KEY obj_name = sy-lisel+1(20).
MOVE jtab-object TO wf_object.
CASE wf_object.
WHEN 'SMOD'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
WHEN 'SXSD'.
SET PARAMETER ID 'EXN' FIELD sy-lisel+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Reagards,
Bharat. -
How to get the owner name for the file in ftp using abap ?
Hi folks ,
How to get the owner name for the file in ftp using abap ? please help me very ugernt . I tried with all standard FTP commands
but doest work out me . Helping in this regard highly appreciated ...
Thanks and regards,
Swarupa VanarchiHi
dont you have used the os user while calling the FTP_CONNECT FM?
Hope you are not talking about the user executing the FTP program.
Else If you are talking about the FTP file creator then its not related to abap as you can handle it by maintaining the user in file name itself.
May be i am going too far with if and elses here as your question possesses no clarity.
Plz elaborate your requirement before anybody can help.
Regards
sateesh -
How to change the package name for a msg class
Can anybody tell me how to change the package name for a message class.
and how will it effect in the rerport?
thanks in advance
kp>>and how will it effect in the report?
You wouldn't see any direct effect on the Report.. But if you transport the report to QA & leave the Message class in Dev, it might result in syntax issues & you will not be able to execute the report. Just ensure that both of them get transported to QA & you will be fine.
~Suresh -
How to Add the title name for Graph in Excel
Dear Friends
I am using LabVIEW 8.0.I need how to add the title name for chart in Excel.
Jayavel
Solved!
Go to Solution.Do you have the Report Generation Toolkit? If so, the Excel Easy Graph VI has an input for that.
If you don't have the toolkit then you will need to use ActiveX. Please do a search on how to use ActiveX (there are examples that ship with LabVIEW) to control Excel. There are also lots of example in the Excel thread. NOTE: DO NOT POST QUESTIONS IN THAT THREAD.
Ultimately you will need to look up the information in MSDN. -
How to Change the Alias name for Internet user in SU01 tr code through cod?
Hi Guys,
My req is we have to change the Alias name(SU01 tr code) for the existing users thru code.So can anybody tell me how to change the Alias name like which we do it in SU01 tr code thru code or FM.?
Is there any FM for tha changing Alias Name?
Thanks,
Gopi.Hello Gopi Anne ,
You can use the following FM / BAPI :
BAPI_USER_CHANGE
MY_BAPI_USER_CHANGE
For BAPI_USER_CHANGE :
You need to make use of the IMPORT parameter :
ALIAS TYPE BAPIALIAS User Name Alias
ALIASX LIKE BAPIALIASX User alias change flag
Thanks,
Greetson -
How to track the user who deleted the info object.
Dear Gurus,
In our BI system one info object has got deleted. If I need to track the user who has deleted that how can I track it(in which DBtable). And the complication is one user ID is being used by many people, in this case how can I track that from which machine the Info Object has been deleted(if there is any possibility to track the machines by IP address).
Kindly let me know if there is any procedure to find it out. Your help will be rewarded with a great honour.
Regards
Mohan KumarHi dear,
you have to go in SLG1 transaction, and then select
Object: RSD
Subobject: IOBJ_DEL
External ID: (put here the name of your deleted IO)
Then choose a time range...and voilà, you can find the user who deleted the IO...
Hope it helps!
Bye,
Roberto
About the IP...look at USR41 table, but I think it's a bit difficult fo find data referred to the past...
If you haven't activated logon auditing in SM19... -
Portal Users name for auditing
Hi,
How can i get the name of portal users. Some one told me that there is some Portal_api through which i can get Portal user and then i can write custom code to insert that name for auditing purpose in tha database table. Can any one tell me what that Portal_api is? If any has done this before then can you expalin it with some example.
Your help in this matter will be highly appreciated.muhammad
I can't tell you the exact name of any particular api but I can tell you where a good place to look.
If you are familiar with any of the MONITOR functions on the Oracle main page, there is one sub category for "chart by user". The contents for these are located under the navigator -> contents -> monitor -> chart by user.
I haven't drilled down far enough to find any specific calls, but since documentation seems so lacking for these thints, I have to go find an example to take apart for the pieces I need.
Hope this helps.
Mike -
How to find the user-exit for transaction fpp2
Hi experts,
could you help me how can I find the user-exit for transaction fpp2. I tried to after the package, but I did not find it.Hi,
Use the following program to find user exits of specified code.
*& Tables
TABLES : tstc, "SAP® Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP® Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP® Modifications
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
I executed the above program but there are no user exits for the specified Transaction.
Thanks,
Naveen Kumar. -
How to find the user exit for infotype 2013 ?
Hi All,
How to find the user exit in infotype 2013? i want to change the drop down list default value in infotype 2013.
Thanks,
Srikanth Preward points if useful
User exit name is PBAS0001.
code should be written in ZXPADU01 for PBO
ZXPADU02 for PAI. -
How to capture the user name who is running concurrent program
Hi Everyone
In oracle apps when i want to store the user name who is running a concurrent program in specific responsibility.
For that I created a table as USER_INFO which has a column called USERNAME.
T o capture the user name i created a before report trigger and wrote the following code which will store the username into USER_INFO
function insert_trg return boolean is
begin
insert into USER_INFO(USERNAME) values
(select fnd_profile.value('USERNAME') from dual);
COMMIT;
return (TRUE);
end;In the above code i used fnd_profile.value('USERNAME') to store the username but after running the concurrent program when i am query the table it returns no rows .
It means the fnd_profile.value('USERNAME') is not storing the value.
Please tell me what to do?
Regards
SabyasachiIn order to fetch any FND_PROFILE or FND_GLOBAL values you need to initialize apps
fnd_global.apps_initialize(user, resp_id,resp_application_id)
begin
fnd_global.apps_initialize(0,20420,1);
dbms_output.PUT_LINE (FND_PROFILE.VALUE('ORG_ID'));
dbms_output.PUT_LINE (FND_PROFILE.VALUE('USER_ID'));
dbms_output.PUT_LINE (FND_PROFILE.VALUE('USERNAME'));
end; Check the following MOS note
How To Set the Applications Context (FND_GLOBAL.APPS_INITIALIZE) [ID 209185.1]
Cheers,
ND
Use the "helpful" or "correct" buttons to award points to replies / Mark the thread as answered, if your question is answered. -
How to get the user name from Single Sign On Process?
Post Author: sasikumar
CA Forum: Authentication
I am loging in Single Sign On Page. Then it goes to one JSP which lists out some links including InfoView link. While clicking InfoView link, I need to pass user name with the url for authentication. How and where can I get the user name?Care to be more specific what you mean with single sign-on? There are numerous ways this can be done.
Just how you get the authenticated o/s user from within an Oracle session, depends on just how the actual authentication to Oracle was done in order to create that Oracle session.
E.g. dealing in Oracle with a LDAP server is very different than dealing with a NT Primary/Secondary Domain Controller using o/s authentication, than dealing with a Java-based application server that does it own thing, etc. -
How to show the User Name on the Cart.aspx page when a user is connected.
Hi,
I am trying to find how I can get the User Name and display it in the top of the Cart.aspx.
For the diplay point of view, this is fine (I have created a <Literal> with a property ID, and specified it in the prerender.)
However, i can not find anywhere how to take the UserID from.
Do you know if there is a way to get this Data?
Thanks.I use something like this within the login control::
<%@ Import Namespace="netpoint.classes" %>
<%@ Import Namespace="netpoint.api.account" %>
private NPBasePage _bp;
protected void Page_Load(object sender, System.EventArgs e){
bp = (NPBasePage)Page;
NPUser u = new NPUser(bp.UserID);
Literal1.Text = u.FirstName + " " + u.Surname;
Maybe you are looking for
-
I have a lenovo S410 Touch laptop -with windows 8.1 -Itunes 11.1.1 ,i am trying to connect my iphone 4s by USB cable but does not connect , it shows that it wants to connect , how can you connect this?
-
Xerox Phaser 3400 PS & Mac OS.10.3.9
I bought my Xerox Phaser 3400 PS late 2002 (Printer Firmware Version: 1.04 01-21-2002) and I've used it with sucsess running Mac OS 9.2.2 on my Power Mac G4 with 768mb RAM installed. As allways before, the units are connected via a 3C16793-ME OfficeC
-
UK not listed in the wireless options
Hi all, So ive recently moved to the uk and am having a horrible time getting on the internet with my TC, England isnt shown in the wireless options location pull down menu, which has me baffled. could this be why it doesnt think the ethernet is plug
-
PLEASE HELP...ANNOYING START UP MESSAGE
I recent bought my Mac Book. I was trying to install a printer driver for my printer, and didn't realize that I did not need to. My printer works fine, but every time my computer starts up I get this message after login... *The application LOGINserve
-
Canon 50D CS3 raw conversion noisier than DPP
The ACR CS3 raw conversion of Canon 50D files seems considerably noisier than conversion in Canon's own DPP converter. Is this correct, and are there plans to put it right?