How to paste proc of 1200 lines
Hi,
I have to tune a procedure of around 1200 lines. It consists of many selects. How to paste the query and explain plan for that proc.
Thanks,
979892 wrote:
I need help on that procedure. So, can I paste such a long procedure or have any alternate solutions? Please help meAs APC says, it's going to be too long.
Have a look at you explain plan. Can you see a part of the query that is taking the most time?
Can you extract out and run just that bit and get the explain plan for that?
Similar Messages
-
How to Count Number of completed line items in past 6 months / 12 months ?
How to Count Number of completed line items in past 6 months / 12 months ?
Hi,
I am trying to count "Number of Completed Line Items in Purchase Order Document" for my Key Figure ZPO_CNT.
Purchase Order document = ZEBELN
Line Item = ZEBELP.
I need to find and count if the Line Item has been received in the past 6 months from today and similarly in the past 12 months.
I have "Delivery Completed" field, ELIKZ.
So, based on this would I be able to calculate it in Query Designer?
If so, Please let me know howHello Deva
If youe want to calculate the completed line item for last 6 or 12 month then i think u will be displaying the query data for these montrhs...create a customer exit to give you date range and restric it in filter area....
Now Choose any of the below option
1. I would suggest to implement an additional key figure "counter" in cube and fill values with one for which delivery is completed.
Now use calculated key figure in Query Designer based on logic
IF counter = 1 THEN counter ELSE 0
OR
2. create a formula variable based on ELIKZ and use replacement path variable, it will display you no. of docs for which delivery is completed....
Award points if it solves your problem
Revert back in case of further assistance...
Thanks
Tripple k -
Please let me know how to Count Number of completed line items in past 6 mo
How to Count Number of completed line items in past 6 months / 12 months ?
Hi,
I am trying to count "Number of Completed Line Items in Purchase Order Document" for my Key Figure ZPO_CNT.
Purchase Order document = ZEBELN
Line Item = ZEBELP.
I need to find and count if the Line Item has been received in the past 6 months from today and similarly in the past 12 months.
I have "Delivery Completed" field, ELIKZ.
So, based on this would I be able to calculate it in Query Designer?
If so, Please let me know how
KrishnaHi Experts,
I dont have a defined Restricted key figure yet.
I have populated 0COMPL_DEL(Delivery Completed Indicator) and 0EBELN (Purchasing Document Number) and 0EBELP (Line Item Number in Purchasing Document) .
This is what I think how I need to calculate:
Number of completed line items in past 6 months:
If Delilvery Completed Indicator (0COMPL_DEL) = x, calculate No. of Line Items (ZPO_CNT) from 0CALDAY to 6 months
and
Number of completed line items in past 12 months:
If Delilvery Completed Indicator (0COMPL_DEL) = x, calculate No. of Line Items (ZPO_CNT) from 0CALDAY to 12 months
Please let me know if the logic is correct. If so, how I can create this in report -
750 to 1200 line items per order
Hi
Does any body have the experience of creating order with 750-1200 line items per order, in such scenario how the performance of the e-commerce was handled, was any custom development made to achieve.
please let us know
thanks
vigneshStefan, as stated, this was not well thought through solution (but with some work would be possible to achieve).
Regarding memory leaks. We have spent quite a bit of time looking in-depth at the shop code over the years and have so far seen very little evidence of actual memory leaks.
MASSIVE memory consumption, yes, definitely, but no actual leaks
If you have a suitable OS and JVM running that will allow you to crank up your JVM memory settings then you will most likely see that the memory usage will plateau...it might just be at a much higher level than you would have reasonably expected.
To give you an example. One of our customers was running a very large catalog (900 000 items) and the shop used 22 GB of memory when running. One of the main reasons in their case, with such a big catalog, was how the web shop chooses to create web cat items and cache them. Deep in the standard shop code you can find that there are lots and lots of ArrayLists initiated and they are all given a >0 default length, which consumes memory even when empty. In this particular case this became such a big issue that we sent SAP the proof that if they would initiate the ArrayLists with 0 length the memory consumption would drop significantly for each WebCatItem instance.
We estimated at the time after some in-place replacements of the CatalogAttributeValue, class out of the pcatAPI.jar where we set it by default to null instead of size of 10 that we would have saved about 40% of memory consumption. We even prepared the test case and sent it all to SAP, but don't think we ever got it implemented in standard code.
Another suggestion was that SAP would implement a LRU cache for catalog caching for larger catalogs....again would help with memory usage challenges.
With another customer we had 1 Million+ hits per business day (8 h period) and I can't remember us ever having to chase up memory leaks in the standard shop code...they might exist, but perhaps the usage scenarios I've been involved in have just not brought most of them to daylight.
Purely out of interest...if you have found memory leaks in the shop it would be interesting to hear where you found them.
Cheers
Kalle -
How do I copy a few lines from a pdf document to a Word document?
I'm not looking to convert the whole document, just need to copy a few lines here and there.
ps. Wow, what a user UNFRIENDLY site this is!In most cases you can just select the text and copy/paste. You can do that unless the file is a picture/scan.
-
How to tranfor stock from 1200 to 1300 plant,
How to tranfor stock from 1200 to 1300 plant, we will shift the production line and materials to 1300 plant.furtherly we wont produce any material in plant 1200 so how can tranfer the stock in SAP ?
Hi ,
Use T code MIGO or MB1B for transfer from on plant to other .
Use the movement type 301 for 1 step transfer .
Use movement type 303 followed by 305 for 2 step transfer .
Consult your MM counter part for the same as you wont be having the requisite authorization i guess.
Regards ,
Dewang T -
I am still a newbie to my Mac and I can not seem to figure out how to paste a hyperlink where someone else can just click on the link I send them and not have to cut and paste the link.
ThanksHi Ali B,
Thanks for your reply, I did mean the link (URL) in Discussions and a Link within a Thread - Which is why I was confused. I also do not read code. I'm not so sure that Herknav meant this - I think he was asking about for mail and etc.
Hi Herknav, If you were asking for your mail or ichat then - Highlight the http:// address on your top tool bar - then choose Edit > Copy - then go to whatever you're typing to and click the cursor (flashing vertical line) to the spot you want the link to appear - then at your top tool bar again choose Edit > Paste and your link should paste to the location you had put your flashing cursor....It will not look like it's active - however once you send it you can check in your send folder and see it's highlighted as a link that can be clicked.
Hi Brian Eater,
I already use the copy-paste for mail and ichat - I was trying to understand George Orville's informed help - and assumed it was for threads and discussions. Thanks for your reply. -
How to clean project from comman line ?
How to clean project from comman line ?
I would like to invoke the same functionality as in Flex
Builder Project -> clean... -> clean all projects...
but from command line is it possible ?You can:
1) Perform a project clean up (p.153 of the user manual) - it removes any unused recordings, samples and other files
2) Consolidate project (p. 154 of manual) - this copies all the used audio material into the project folder and also deletes any empty folders within project folder, making it easier to navigate
3) Save project as a copy - this creates another project folder, but without all the backups and other additional files -
How to give the no of lines per a page in alv report
hi
could u plz inform me
how to give the no of lines per page in alv report
in ordinary report we can give line-count na
how can we give in alvs.
thanx
kals.Hi Kalyan,
There is another Forum(Abap Development) where u can post abap related stuffs and u can also get quick answers there..
Cheers...
Santosh -
How to paste attributes from one photo to a selection of photos?
When I try to copy attributes (i.e: white balance, etc) from one photo and paste to a group of other photos, the attributes are only pasted to the most selected (first) photo of the group. The result is the same whether I use the menu or keyboard shortcuts for the copy and paste. Does anyone know how to paste the attributes to the entire group in one fell swoop?
Are you selecting the group of images from the grid view or from the filmstrip at the bottom of the library module? I have found that many operations are only applied to the first image in a selection if the selection was made from the filmstrip at the bottom of the library module. If the group of images is selected from the grid view, then the operation applies to all the images selected.
I hope that helps.
Walt
B & B Photography -
How Do I Configure the PFI Lines as input in PXI 6713 module
Hi,
I have PXI 6713 module in my PXI 1044 chassis. I have configured PXI 6713 module to geneate certain analogue signals to my board.
Board inturn process this analogue signal and responds back the status signals through a status register on the board. In my application,the status bits in status register of the board are mapped to the PFI 0:3 bits on PXI 6713 module ( pins 11,10 , 42 and 43).
My query is how do i configue the PFI lines as input in PXI 6713 module to read these status bits ??
May be below explanation could give you little bit more information w.r.to my query.
When i use NI USB - 6008 module to read the same bits , since this device has 12 digital I/O lines, i could able to read the status bits in to the last 4 digital lines by configuring the those digital lines as input.
In PXI 6713 module i have only 8 digital lines. These 8 digital lines i have used to send the digital signals to the board. I am left with no digital I/O lines. Hence i couldn't use these digital lines. I am left with only one option to use. Theya re PFI lines. Moreover the status bits in the pin out of board are mapped such that the bits can be read through the PFI lines.
I am wondering do we have any example code to use inorder to read these status bits on the board using the PFI lines.
Please let me know if you need additional information to help me out.
Thanks.
Solved!
Go to Solution.Hello There,
When using the PFI pin as an input, you can individually configure each PFI for edge or level detection and for polarity selection. This PFI information can be referenced in the DAQ Analog Output Series Manual on page 6-1 (http://www.ni.com/pdf/manuals/370735e.pdf). Unfortunately, the PXI-6713 PFI lines are only capable of timing input and output signal for AI, AO, or counter/timer functions. The option of creating static DI from the PFI lines is not available for the PXI-6713. However, some cards have this capability. Newer National Instruments products with PFI lines have the option of setting PFI lines as:
Static Digital Input
Static Digital Output
Timing Input Signal for AI, AO, DI, DO, or counter/timer functions
Timing Output Signal from AI, AO, DI, DO, or counter/timer functions
(http://digital.ni.com/public.nsf/allkb/14F20D79C649F8CD86256FBE005C2BC4)
When set as static DIO, the PFI lines are assigned to a different port (eg. PFI0-7 is Port1). More details about this can be referenced at:
http://digital.ni.com/public.nsf/allkb/DA2D3CD0B8E8EE2A8625752F007596E1
http://digital.ni.com/public.nsf/allkb/862567530005F09E8625677800577C27
Regards,
Roman Sandoval | National Instruments | RF Systems Engineer -
How can I set the default line height?
Greetings,
I have a report that displays observed behavior in a list format like the one below:
Behavior Observed:
Withdrawn
Happy
Sad
angry
There are 5 responses as to the severity of the behavior or it is left blank if the behavior was within normal limits.
So the output would look like this:
Behavior Observed:
Withdrawn (mild)
Happy
Sad (moderate)
angry
The problem is that when this report was designed the details sections were not uniformy formatted and the spacing between data elements is hard to follow from the label to the data field. I tried to set the details to be uniform by selecting "Arrange Lines", however when I do this, the data is displayed too close horizontally. So my question is how do I set the default line height for each field so that they are uniform in distance from each other but not too close due to the font height?
Does this make sense?
Thank you,
KevinI'm confused... How are you associating line height with horizontal field spacing???
If you have this...
Behavior Observed: Severity:
Withdrawn (mild)
Happy
Sad (moderate)
angry
But want it to look like this...
Behavior Observed:
Withdrawn (mild)
Happy
Sad (moderate)
angry
all you have to do is create a concatenation formula. Something like this...
{TableName.BehaviorObserved} & " (" & {TableName.Severity} &")"
Sorry if I've misunderstood what you are trying to do.
Jason -
How to delete the Cost center line item data
How to delete the cost center line item data of particular cost center and only one cost center is exisiting for that company code.
Is there any way to delete the line items in that cost center.
Can data archiving & deleting can help us..........
does it have any effect over other cost center data....
any input needed.........
regards
rajeshHi,
i found 2 reports for you:
1) CO_TOTAL_WRI - Archiving CO Totals Records
2) RKCOITW1 - Archiving CO Line Items: Write Program
from 2) is a linlk to customize archiv-parameters
-> start it with transaction se38 / sa38
A. -
How to delete the old schedule line release?
Hello,
How to delete the old schedule line release in apo?
Generally GR has to be carry out schedule line release in r/3 which reduces the Schdule line release.
But i do want do GR against old schdule line release instead i want to delete the old schdule line release.
Please suggest.
Regards,
Sunil PatilSunil ,
/sapapo/cmds_del is the tcode to deleted sales scheduling agreement confirmations and releases
/sapapo/display_conf is the tcode for displaying sls. sch.agr confirmations and releases
The above two are in the supply chain collaboration menu
/sappao/cmds_sc02 is the tcode to delete sales scheduling agreements . This tcode is in the application specific master data menu
Thanks
Saradha -
How to delete the old schedule line release in apo
How to delete the old schedule line release (from current date) in apo which is having schedule firmed?
Please suugest.
SunilHow is it possible to delete old purchasing schedule lines in APO (that do not exist in R/3)?
Though used successfully before, /SAPAPO/CCR will not reconcile our discrepancy in this case.
Thanks in advance,
Jim
Maybe you are looking for
-
CAn I change the apple I'd and password on one of my two iPads and will they both operate separately. Right now when my husband adds a game it also is added to the other one and when I add recipes in pages, they go into the other I pad too. When I p
-
Battery backup is getting worse in my N82
Hi all, I have used my N82 for 3 months now. earlier the battery used be alive for 2 days at a minimum. but nowadays i must charge my cell atleast once a day to its maximum. Can some one suggest me how to get rid of this prob.
-
HI EXPERTS ! The transaction code for the report we r using is FBL1N - vendor ledger. we require the vendor's bank detail in this report at the header i.e. vendor bank name , account no..( basically change layout of report for output ) this detail ca
-
Hi all, Can anyone tell, after deletion the records from one internal table itab1 using specific condition , that how will insert the single record from another itab2 into itab1 on the same index. Regards Alok
-
I am trying to use Pages to create a Resume' but whenever I select a template it opens up in a foreign language? I usually use Word, but I cannot find Resume' templates in Word. Can someone help me fix the language issue? Or inform me of where to fin