How to perform an enter in a dynamic action?

Hi friends,
I would like to know How to perform an enter in a dynamic action?
Thanks in advance.
Albio.-

Hi Vivas,
A dynamic action has the following components.
Infotype Number (INFTY): specifies the infotype for which you want the dynamic action triggered
Subtype (SUBTY): narrows the focus to a specific subtype
Field Name (FIELDN): starts your action when a maintenance function is performed on a particular field
Function (FC): specifies the various maintenance operations to which your dynamic action would respond. They are 02 (change); 04 (create); 06 (create and change); 08 (delete); 10 (change and delete); 12 (create and delete). Dynamic actions are only applicable in maintenance operations, not in display functions.
Sequence Number (NO): refers to a sequential number.
Step (A): specifies a particular type of action. No dynamic action is executed if the function character has a value other than one of the following:
             P: Plausibility checks, which allow you to check certain conditions.          
             I: Calls an infotype for processing
             W: Called after the I statement and used to assign values to screen fields while creating or copying another infotype record through the I statement 
              F: Calls a FORM routine (subroutines in ABAP) during your action. The routine may reside in or out the module pool MPNNNN00.
             V: Lets you treat collectively a number of fields for which you want to define a common dynamic action
              M: Sends SAP Office mail
Variable function part: The variable function part along with the step indicator forms the core part of your action. It specifies the processing details when the dynamic action is triggered. For example: 
Requirement: When the postal code or the city of an employeeu2019s permanent residence is changed in infotype 0006, an email should be sent to the administrator.
INFTY    SUBTY    FIELDN    FC          NO.    STEP       VARIABLE FUNCTION
0006           1             ORT01      06             001           V               PSTLZ            
0006           1             PSTLZ      06             002           M               M0001
The V statement on line 001 is used to link the two fields to the M statement. The statements relevant to field PSTLZ are also applicable to the ORT01 field.
When a record is created or changed in infotype 0006 of permanent address, an email is sent using the feature M0001. Information such as the recipient address, subject, and content of the mail is derived from M0001.
The maintenance of dynamic actions is done via the view V_T588Z, as shown in Figure 1 (IMG menu path Personnel Management>Global Settings in Personnel Management>Basic Settings>Infotypes>Create Dynamic Actions).
Warm Regards,
Kapil Kaushal

Similar Messages

  • How to display an error message in Dynamic Actions

    Dear Team:
    Scenario as below:
    Whenever the user creates Contract Elements Record, the begin date should be checked with the hire date in 0041 - Date specifications infotype (Date type) and Date of hire. If this is not equal to, then record should be rejected with an error message. Please let me know how do I write the lines in table V_T588M for infotype 0016.
    HOW TO INSERT AN ERROR LINE TO BE DISPLAYED IN DYNAMIC ACTIONS.
    Regards
    Team Member.
    Edited by: Patlolla Mallikarjun on Jul 8, 2009 1:53 PM
    Edited by: Patlolla Mallikarjun on Jul 12, 2009 10:13 AM

    No replies.

  • How to get the User input of Dynamic Action confirmation message ?

    Hi Guys,
    I'm using apex 4.1,
    I have added a confirmation message box as page Dynamic Action. How can i get the user input of that confirmation pop up ?
    Thanks

    Hi,
    you don't directly get the user input. But you should still be able to get what you want. Let's assume you have a dynamic action which fires for a "Change" (or any other) event and which has two or more actions
    1) Confirm
    2) Execute PL/SQL Code
    If the user clicks Cancel/No in the confirm dialog, APEX will stop the execution of this dynamic action and not run "Execute PL/SQL Code".
    Hope that helps
    Patrick
    My Blog: http://www.inside-oracle-apex.com
    APEX Plug-Ins: http://apex.oracle.com/plugins
    Twitter: http://www.twitter.com/patrickwolf

  • Set Cascading LOV Item using Dynamic Action

    Hi all,
    I have the following page item:
    P1_USERNAME
    P1_COMPANY  (LOV)
    P1_DIVISION (LOV)
    P1_DEPT (LOV)
    Item P1_COMPANY, P1_DIVISION, and P1_DEPT are cascading LOV on my page.
    I also have a table that contains the user and his/her company, division, and department.
    So I have a dynamic action that when P1_USERNAME is entered. The dynamic action will pull the COMPANY, DIVISION, and DEPT information from the table and populate the page item accordingly.
    I got the dynamic action working, I can confirm this by checking the Session State of the items.
    BUT I cannot get the LOVs to display the selected value from the session state. They always reset back to "- Please Select -", which is my display value when NULL.
    For example:
    I have a record like in the table:
    Username :alex
    Company : Finance Inc.
    Division : Admin
    Dept : HR
    When I entered the username into P1_USERNAME, this is what I see in the screen.
    Username :alex
    Company : - Please Select -
    Division : - Please Select -
    Dept : - Please Select -
    While the session states of the items have been set correctly as per the record in the database.
    Has anyone experienced this before?
    I think it's because the parent LOV (company), reset the child LOVs (division and dept), when the dynamic action kicks in.
    Thanks.

    I've just taken a look at your sample page and don't think this issue is actually too complicated to solve. (Actually, it was I who was mucking around in page 1, sorry for that. I was looking at it and then had to go. Picked it up again later on and just made a copy this time)
    You change the employee. The dynamic action fires, executes plsql and sets the values in the company2/division2/dept2 fields
    Company 1 is a cascading lov. Empo has changed? Company refreshes. Cascading for division and dept as well.
    You can see this happening in sequence as well when looking at the page. Select emp, it'll hang for a second. You then get the select list refresh icons.
    The sequence in which this happens is of course a bit wrong. You set the values for the items on the client side first, but then their refresh is kicked in, and so the value setting is simply lost again.
    What makes this annoying is how P1_EMPNO is a cascading lov parent of P1_COMPANY. Changing P1_EMPNO will refresh the lovs beneath it. However, you can't simply set their values after you've retrieved the user's company/division/dept, because each lov is dependent on the one above it. Eg you change the employee. The company lov is refreshed. Because the it is refreshed, the division lov will refresh. Now you can set the value of the company lov, but not that of the division one. Why is this? The lov for division requires the value of company in the session state. If you'd set the value for company after it has finished refreshing, it will already be too late for division to pick up the value set. .
    I made a copy of your page to page 5, “tom”.
    The first I did was removing the cascade from the company lov. You don’t need this. There are simply no parent lovs for this lov, as is evident from the sql for it. The companies always remain the same companies even when you select another person; it is not dependent on another item for its values.
    Then the timing issues come in play, and with them there is also the issue of the session state.
    So now companies always show. You pick a user, it runs the PLSQL block and put values in the P5_xxx2 items. P5_COMPANY can be set now, and this is in the set value of the dynamic action. By not suppressing the change event, a refresh will be triggered on its cascading lov, P5_DIVISION.
    Refreshing P5_DIVISION will only get the new lov values (constrained within the chosen company) for this item though, and not set the value. We already have the values in P5_DIVISION2 however, and thus can use the “After Refresh” dynamic action on P5_DIVISION to do this. In short: company gets set, divisions refresh to show the correct divisions, and then the selected value is set. Again, by not suppressing the change event on this item the depending lov on DEPT will be refreshed.
    Then by using another “After Refresh” dynamic action on P5_DEPT we can set the selected value once more.
    Also important is that I changed P5_DIVISION to submit P5_COMPANY when it is refreshed, and P5_DIVISION when P5_DEPT is refreshed. This makes sure that the correct set of values is retrieved and probably why you were struggling aswell. After company has changed and division has refreshed, the value on division is set. But the correct divisions are shown only because the chosen company has been set in the session state.
    The same for division - dept. After the refresh of division, the chosen value for division is set. This change will trigger the refresh on dept, and because dept has the division in its page items to submit list, the correct values will be retrieved.
    Take note that the “debug items” are required in this solution though. Just set them as hidden and unprotect their value. Your goal should be to reduce the amount of roundtrips to the server. Why do a plsql (ajax) call just to retrieve a session state, when the value is already on the page and all in one action? Three hidden items is just so much easier than 3 extra ajax calls, the tradeoff is plenty.
    There is one more noteworthy point, and that is the fact that dept is being retrieved twice. That makes sense because of the cascading lovs. Initially company is changed, and this will refresh division and this in turn will trigger a refresh on dept. At this point the lov for dept will be empty, because division will be empty. Because we set the value of division again after it has refreshed, this will trigger a second refresh on dept, though now the correct list of values is retrieved because division has a value set. Not that big an issue, but good to point out. If you’d have another cascading lov beneath dept, it would refresh three times.

  • Dynamic actions: ins when new, mod when existing?

    Hello,
    I want to create a dynamic action in infotype 2 that creates or modifies a record in infotype 21 when the marital status is changed.
    So when there is no spouse yet in infotype 21, the record should be created. But when there is an existing spouse, it should be modified instead.
    How exactly can I do this in dynamic actions? Ins when new, mod when existing? Is there a special keyword for that?

    0002              FAMST     06     11     P     P0002-FAMST='1'
    0002              FAMST     06     12     I     INS,0021,1,,(P0002-FAMDT),(P0002-ENDDA)

  • How to specify 2 conditions in when settings for 2 items in dynamic actions

    Hi,
    How to use 2 conditions for 2 different items in Page rendering ->dynamic actions-------when event settings
    Actually i have three items like A nd B nd c
    If A=v,x,y,z and B=k,l............ i need to set some content like
    "werttyyyy" in c  and i need to make it as disable
    if A=v,x and B=k ..................
    i need to enter the text in c  which i would  like to be freetext  and i need to make it as enable now
    here it is i struck  ------------Page rendering ->dynamic actions-------
    when
    event
    change
    select type
    items
    items
    a,b
    condition
    <<<<<< how to mention my condition in tis column>>>>>>>>>>>>>>>>>>>>>>>
    Regards,
    Pavan

    Hi JTan414,
    I have check the expression you have provided and there are many incorrect using of this expression, please check and do some modification as below:
    For the MonthName function you should follow the grammar like:
    =MonthName(10,True)
    =MonthName(Month(Fields!BirthDate.Value),False)
    ="The month of your birthday is " & MonthName(Month(Fields!BirthDate.Value))
    You have add the dataset name "DealStarts" at the wrong place, it should like below:
    =Last(MonthName(Month(Fields!BirthDate.Value)),"DealStarts")
    or
    =Last(MonthName(Fields!IntegerValueField.Value),"DealStarts")
    This will return the last value from the dataset
    There is no function named launchdate, expression "launchdate ("RowofTrendingVisibility")" is incorrect and you shouldn't add the datasetname in this way.
    If the expression involved of conditions from two different datasets, limit kinds of functions will support to use:
     =Last(Fields!BirthDate.Value,"DataSetName")
    =First(Fields!BirthDate.Value,"DataSetName")
    More details information about how to use expression in SSRS:
    Expression Examples (Report Builder and SSRS)
    If you still have any problem, please try to provide more details information about your requirements and also some sample data.
    Regards,
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • How much performance do I gain by enable MAT

    Hi
    I must try to ask you guys before am try to enable MAT
    I have never entered the bios before so am a little scared that I will f-up the system.
    Do anybody here at this forum with similar memory and componemts have tryed to this MAT function.
    Must it be "Turbo" or "Ultra turbo" to activate MAT?
    How much performance do I gain by this.....do I notice it in games....Battlefield 1942 for an example..or?
    If the system do not like it...what happens, shutdown or? unstable?
    Please give some advice.
    Mr Lithesteel

    MAT will give you at least a 5% increase in memory bandwidth when set to turbo mode regardless of the brand of memory you have. I own a pair of generic value ram and i see an increase of around 5 to 10 percent memory bandwidth when turbo mode is on, however my sytem fails to boot when MAT is set to ultra turbo, try to mess with the bios so you could figure out the best configuration of your system (you could measure memory bandwidth with sisoft sandra http://www.sisoftware.co.uk/), By the way your system is prepped up for hyperthreading, you own an 865pe which means your board is ready for hyperthreading, now unless you own the first generation of pentium4 procs which does not support ht, you are all set to run with hyperthreading, it would be nice if you upgrade to win xp pro or at least win2k so that you would be able to maximize your system's potential, Win XP home edition  does not support multi-threading so youre loosing a lot of performance with it. Hope i helped you with your question.

  • Dynamic actions - how to create an infotype with a date - 1 day.

    Hi everyone,
    I need a requirement to change an infotype through dynamic action with ENDDA = BEGDA of maintaned infotype(0000) - 1 day.
    In other words when a  personel action is performed, another infotype (2001) should appear for change, and in the validity period of this infotype should end with the day before the start of the personel action.
    is it possible to achieive this using dynamic actions? how?
    Thanks!
    Stanislaw Adamski

    Hi Adamski,
    A dynamic action has the following components.
    Infotype Number (INFTY): specifies the infotype for which you want the dynamic action triggered
    Subtype (SUBTY): narrows the focus to a specific subtype
    Field Name (FIELDN): starts your action when a maintenance function is performed on a particular field
    Function (FC): specifies the various maintenance operations to which your dynamic action would respond. They are 02 (change); 04 (create); 06 (create and change); 08 (delete); 10 (change and delete); 12 (create and delete). Dynamic actions are only applicable in maintenance operations, not in display functions.
    Sequence Number (NO): refers to a sequential number.
    Step (A): specifies a particular type of action. No dynamic action is executed if the function character has a value other than one of the following:
                 P: Plausibility checks, which allow you to check certain conditions.          
                 I: Calls an infotype for processing
                 W: Called after the I statement and used to assign values to screen fields while creating or copying another infotype record through the I statement 
                  F: Calls a FORM routine (subroutines in ABAP) during your action. The routine may reside in or out the module pool MPNNNN00.
                 V: Lets you treat collectively a number of fields for which you want to define a common dynamic action
                  M: Sends SAP Office mail
    Variable function part: The variable function part along with the step indicator forms the core part of your action. It specifies the processing details when the dynamic action is triggered. For example: 
    you have to look for the scenario what you are planning tyo create .
    The maintenance of dynamic actions is done via the view V_T588Z, as shown in 1 (IMG menu path Personnel Management>Global Settings in Personnel Management>Basic Settings>Infotypes>Create Dynamic Actions
    Here you havev to use conditions INS for the infotype what you want to create..
    Please brief the light on the scenario.
    Warm Regards,
    Kapil Kaushal

  • How to perform process chain monitoring

    Hi All,
    can u send me the steps how to perform process chain monitoring and what to do if we get any error in any process in the process chain. if possible if any one have the screen shots how to do kindly send me that link.
    Thanks & Regards,
    Naveen

    Transactions used to monitor the Process chains
    RSPCM
    SE38 >/SSA/BWT or ST13>BW-TOOLS
    --> clic on execute --> select the process chains radio button --> execute
    --> click on process chains -->if you want to monitor the specific process chain enter the process chain id or if you want to monitor the process chains that are running in a particular date and time interval simply enter the values and click on execute...
    it will display the process chains status and time of the runs etc...

  • ADF 11g + How to capture the value of a dynamically created input text box

    Hi All,
    I have a requirement where, on selection of the value in a drop down, the input text boxes need to get dynamically populated on the JSPX page. I'm able to bring this functionality, and it is working fine.
    But the challenge right now I'm facing is that, how to read/capture the value entered in those dynamic text boxes on submission of the page. Please help me in getting this resolved.
    Below is the code snippet I'm using for this.
    // Clearing the existing input fields in the Panel form
    while (pf100.getChildren().iterator().hasNext()) {
    pf100.getChildren().remove(pf100.getChildren().iterator().next());
    // Creating the new fields based on the number of IP addresses selected
    for (int i = 0; i < iIPAddress; i++) {
    RichInputText pcPreferredDomain = new RichInputText();
    pcPreferredDomain.setLabel("Preferred Domain / Hostname for Desktop PC/ Laptop - " +
    (i + 1));
    pcPreferredDomain.setColumns(40);
    pcPreferredDomain.setId("pcpfdomain" + (i + 1));
    pf100.getChildren().add(pcPreferredDomain);
    Thanks All in Advance,
    Thanks & Regards,
    Dharmathej M

    As per your method, you are creating the RichInputText components as local variables.
    What happens when you are creating them as class level variables in the managed bean, if you do so, you can refer to the values of the UI components in the actionListener/action code for the command button in the managed bean
    sample:
    public class ManagedBean{
    RichInputText [] pcPreferredDomain;
    public ManagedBean(){
    // Clearing the existing input fields in the Panel form
    while (pf100.getChildren().iterator().hasNext()) {
    pf100.getChildren().remove(pf100.getChildren().iterator().next());
    pcPreferredDomain = new RichInputText[iIPAddress];
    // Creating the new fields based on the number of IP addresses selected
    for (int i = 0; i < iIPAddress; i++) {
    pcPreferredDomain[i] = new RichInputText();
    pcPreferredDomain.setLabel("Preferred Domain / Hostname for Desktop PC/ Laptop - " +
    (i + 1));
    pcPreferredDomain.setColumns(40);
    pcPreferredDomain.setId("pcpfdomain" + (i + 1));
    pf100.getChildren().add(pcPreferredDomain);
    Thanks,
    Navaneeth

  • HOW to simulate the enter key???

    Hi , I have a jTable ,and i want that by leaving a specific
    cell ,to perform the same action that the enter key does!
    when im leaving my specific cell the following function is being called:
    public void editingStopped(ChangeEvent e) {
    //here I want to simulate the enter-key's action
    HOW to simulate the enter key???
    10x in advance
    Nir.
    p.s. My initial problem was that when i left my specific
    cell (the cell is editable combo box), an edited words
    which were written by me vanished , and when i get back to that cell the edited word showed again!!!
    when i pressed the enter key the edited word were stable in the cell!!!
    when I chose a word from the combo evrything was ok!!
    so if any one can solve me that problem ill be appreciate.
    thanks Nir

    yourActionListener.actionPerformed(new ActionEvent(yourCell))
    I am not sure about the constructor of actionevent.
    you could try if setText(getText()) produces a good result

  • How  to call  DYNAMIC ACTIONS

    hi experts,
          i have an subroutine for dynamice action for creating IT2006 with me.
    but i dont no where to call that subroutine can anyone plz tell me how to do this.
    where should i write perform statement.
    for eg. i want to call that action while creating /changing the record in IT0001.
    plz do ASAP.
    thanks in advance.
    vinod.

    HI,
    Go to IMG>Personnel Management>Personnel Administration>Customizing Procedures>Dynamic Actions
      Or Use table T588Z.
    Have a look at these links
    http://wiki.ittoolbox.com/index.php/Dynamic_Action
    http://www.hrexpertonline.com/downloads/Rehan%20Zaidi%20Online%20Portion.doc
    Reward points if Helpful.
    Regards,
    Manoj.

  • How to perform calculations using column data in BI Publisher

    Hello guys
    I am very new to BIP, and recently I am learning to create new templates using XML files..
    I am trying to create a report that has Account Amount, Amount Net Amount, PM_Amount and a New field say "X"
    For Account Amount it is what it is, but for Net Amount it is "Account Amount/40%", for PM_Amount it is "Net Amount x (Account Amount/30)" and for field X it is "(Net Amount + PM_Amount)/column A" where column A is another data field in the XML file but it should not be included in the template report..
    Could anyone help me with how to perform such kind of calculations in BIP Template builder? In OBIEE, it is very easy that I can just use column formula, but in BIP I still haven't figure out the way yet..
    PLease advice
    Thanks

    Thanks for the reply..
    I looked at the link you provided already, what I wanna know is how to exactly apply the expression in my calculation. In other words, I know that Column C = "Column A div Column B", but in BIP form property, how do I actually substitue "column A" with the actual column..
    I wish I could post the XML, but it is huge, it contains 6 data sets and more than 100 columns. I only need 15 columns on my template.
    On the form property of each measures, in the "advance tab", I see codes like <?accountamount?>. Now I wanna have a new column said "PM_Amt" which should be "(accountamount div %40) x column B". So I just randomly select another column said "payment". I rename it to "PM_AMT" and on its "advanced tab" it is still <?payment?>. So right there, if I wanna replace that code with a new one that does "(accountamount div %40) x column B" calculation, how would I do it? What would be the syntax including how to propertly refer to the right column field as part of the expression?
    And do I have to always use xdofx between <>? how would I know?
    Please advice if you understood what I am trying to say
    Much thanks
    Edited by: user7276913 on Sep 14, 2009 11:24 PM

  • Dynamic Action with KeyCode check for ENTER button pressed

    Hi,
    I want to create a dynamic action which executes if the ENTER button of field P1_NAME is pressed.
    I thought about this type of DA:
    Event: Key Press
    Selection Type: Item(s)
    Item(s): P1_NAME
    Condition: Javascript expression
    Value: this.triggeringElement.keyCode == 13
    That unfortunately doesn't work! Dynamic action doesn't get executed...
    Hope for help! :)
    Tobias

    I found the solution in my own blog: :)
    Event: Key Press
    Selection Type: Item(s)
    Item(s): P1_NAME
    Condition: Javascript expression
    Value: this.browserEvent.keyCode == 13

  • Performance issues with dynamic action (PL/SQL)

    Hi!
    I'm having perfomance issues with a dynamic action that is triggered on a button click.
    I have 5 drop down lists to select columns which the users want to filter, 5 drop down lists to select an operation and 5 boxes to input values.
    After that, there is a filter button that just submits the page based on the selected filters.
    This part works fine, the data is filtered almost instantaneously.
    After this, I have 3 column selectors and 3 boxes where users put values they wish to update the filtered rows to,
    There is an update button that calls the dynamic action (procedure that is written below).
    It should be straight out, the only performance issue could be the decode section, because I need to cover cases when user wants to set a value to null (@) and when he doesn't want update 3 columns, but less (he leaves '').
    Hence P99_X_UC1 || ' = decode('  || P99_X_UV1 ||','''','|| P99_X_UC1  ||',''@'',null,'|| P99_X_UV1  ||')
    However when I finally click the update button, my browser freezes and nothing happens on the table.
    Can anyone help me solve this and improve the speed of the update?
    Regards,
    Ivan
    P.S. The code for the procedure is below:
    create or replace
    PROCEDURE DWP.PROC_UPD
    (P99_X_UC1 in VARCHAR2,
    P99_X_UV1 in VARCHAR2,
    P99_X_UC2 in VARCHAR2,
    P99_X_UV2 in VARCHAR2,
    P99_X_UC3 in VARCHAR2,
    P99_X_UV3 in VARCHAR2,
    P99_X_COL in VARCHAR2,
    P99_X_O in VARCHAR2,
    P99_X_V in VARCHAR2,
    P99_X_COL2 in VARCHAR2,
    P99_X_O2 in VARCHAR2,
    P99_X_V2 in VARCHAR2,
    P99_X_COL3 in VARCHAR2,
    P99_X_O3 in VARCHAR2,
    P99_X_V3 in VARCHAR2,
    P99_X_COL4 in VARCHAR2,
    P99_X_O4 in VARCHAR2,
    P99_X_V4 in VARCHAR2,
    P99_X_COL5 in VARCHAR2,
    P99_X_O5 in VARCHAR2,
    P99_X_V5 in VARCHAR2,
    P99_X_CD in VARCHAR2,
    P99_X_VD in VARCHAR2
    ) IS
    l_sql_stmt varchar2(32600);
    p_table_name varchar2(30) := 'DWP.IZV_SLOG_DET'; 
    BEGIN
    l_sql_stmt := 'update ' || p_table_name || ' set '
    || P99_X_UC1 || ' = decode('  || P99_X_UV1 ||','''','|| P99_X_UC1  ||',''@'',null,'|| P99_X_UV1  ||'),'
    || P99_X_UC2 || ' = decode('  || P99_X_UV2 ||','''','|| P99_X_UC2  ||',''@'',null,'|| P99_X_UV2  ||'),'
    || P99_X_UC3 || ' = decode('  || P99_X_UV3 ||','''','|| P99_X_UC3  ||',''@'',null,'|| P99_X_UV3  ||') where '||
    P99_X_COL  ||' '|| P99_X_O  ||' ' || P99_X_V  || ' and ' ||
    P99_X_COL2 ||' '|| P99_X_O2 ||' ' || P99_X_V2 || ' and ' ||
    P99_X_COL3 ||' '|| P99_X_O3 ||' ' || P99_X_V3 || ' and ' ||
    P99_X_COL4 ||' '|| P99_X_O4 ||' ' || P99_X_V4 || ' and ' ||
    P99_X_COL5 ||' '|| P99_X_O5 ||' ' || P99_X_V5 || ' and ' ||
    P99_X_CD   ||       ' = '         || P99_X_VD ;
    --dbms_output.put_line(l_sql_stmt); 
    EXECUTE IMMEDIATE l_sql_stmt;
    END;

    Hi Ivan,
    I do not think that the decode is performance relevant. Maybe the update hangs because some other transaction has uncommitted changes to one of the affected rows or the where clause is not selective enough and needs to update a huge amount of records.
    Besides that - and I might be wrong, because I only know some part of your app - the code here looks like you have a huge sql injection vulnerability here. Maybe you should consider re-writing your logic in static sql. If that is not possible, you should make sure that the user input only contains allowed values, e.g. by white-listing P99_X_On (i.e. make sure they only contain known values like '=', '<', ...), and by using dbms_assert.enquote_name/enquote_literal on the other P99_X_nnn parameters.
    Regards,
    Christian

Maybe you are looking for

  • How can I install on Windows remotely via command line?

    Hello Folks. I want to install an application on Windows remotely and via command line, For example, I need a tool like Psexec or WMIC but I don't like the user understand it. Any idea? 

  • IWork 09 - all apps loading slowly when on network

    Hi I have just received a copy of iWork 09 at work, for installation to our school iMac workstations. However, I'm having the problem in that all of the apps, Numbers, Pages and Keynote load very slowly when my test iMac is connected to our school ne

  • SO 8 database access using BASIC

    I created a database using StarOffice 8 and I want access it through BASIC. Unfortunately I keep getting the following error: Table not found in statement [SELECT ItemDescription FROM Inventory]. This should work because my SQL query uses the same sy

  • HT204053 changing your apple id in icloud

    I changed my apple id and now I can't change my iCloud id, and can't access iCloud because my apple id is changed.  How do I chang my id in iCloud?

  • IWork don't work!

    Hi, I have tried many times now to get iWork to function but I still cannot open a file, get a templates menu, or anything at all. I have removed ALL files related to iWork and reinstalled but still nothing. Can anyone offer some solution as I have e