How to perform click action on the notification received in windows phone 8.1 silverlight app?
Hi,
I am developing a windows phone 8.1 silverlight app , I added push notification service to my app and I am able to receive notifications .
My question is when the app is not opened and the notification is received , if the user clicks on the notification it is directly taking to the app ,
but I want to redirect it to a specific page in my app How is it possible?
Any help..
Thanks..
Suresh.M
Thanks for your information
but where to write the rootframe.urimapper , I think it is in app.xaml.cs , If I write urimapper , how do I know I am navigating from notificaition?
Suresh.M
Why you need to know it is from notification? If you must need to know this, try to check deep link
Best Regards,
Please remember to mark the replies as answers if they help
Similar Messages
-
How to play live streaming in windows phone 8.1 silverlight app?
Hi,
I am developing a windows phone 8.1 silverlight app. In my I want to show live streaming youtube channel , I think it is not possible,
Actually that youtube channel is a television channel , I want to stream that live tv in my app.(I tried to load youtube channel in webbrowser in iframe tag but it is not opening)
Anybody help me how to play live tv or live streaming in my app,
Thanks..
Suresh.MHello,
You will likely need to write a custom
MediaStreamSource that can access the media stream and parse it. Windows Phone supports h.264 natively and as long as the site serves up a media stream that contains h.264 frames you can parse it and have our built in decoder decode and display it. You
will need to have intimate knowledge of the streaming protocol used by the website that you are trying to play. You must also make sure that the website is not using protected content. IANAL so I would recommend that you have your local law professional
(lawyer) review the licensing of the website that you are attempting to connect to and stream from before continuing your development. Your lawyer can make sure make sure their licensing allows you to do this.
I hope this helps,
James
Windows SDK Technologies - Microsoft Developer Services - http://blogs.msdn.com/mediasdkstuff/ -
How to publish Windows Phone 8.1 Silverlight app to Windows Phone store?
I created Windows Phone 8.1 Silverlight app, and I can't to upload it into WP store. I want to use Create
App Packages tool in Visual Studio 2013 Professional, but it's impossible for Silverlight apps. I read many guides
on dev.windows.com. It's necessary to upload only .appx, .appxbundleor .appxupload files,
but I have .xap file
only in Bin\ARM\Release folder.
May anyone help me?Appx packages are only for Windows Runtime apps. Windows Phone Silverlight apps use xap files. The Windows Phone Store will accept either xap (for Silverlight) or appx (for Runtime) apps.
I discussed this in more detail in my blog entry: Why can’t I create an app package? Windows Phone Xap vs. Appx -
(1) Is there any way that I can get the transition menu to remain on the screen. I select a transition, drag it to the timeline and after I click done I have to start the process all over to perform this action on the next transition. I have premiere elements 12. In older version the menu would stay on the screen.
(2) In pan and zoom how can start zoom on a photo in the original picture and zoom in and the next picture zoom out and the next photo pan from right to left and the next photo pan left to right.
Thanks
SamTidyCup
What computer operating system is your Premiere Elements 12 running on? If you have not already, be sure to update 12 to 12.1, using an opened project's Help Menu/Update.
But to the immediate questions, assuming Windows 7, 8, or 8.1 64 bit....
1. No, it is what it is. But, are you applying the same transition each time? If so, then highlight/select all the clips involved (all at one time), then Timeline Menu/Apply Default Transition will do just that for the highlighted/selected clips.
To highlight/select more than one clip at a time, hold down the Shift key of the computer main keyboard and then click on each clip that you want in the group selection
or
with your mouse cursor draw a rectangle around the clips that you want to select
2. Are you using the Premiere Elements 12/12.1 Expert workspace Pan and Zoom Tool? Or the pan or zoom presets under fx Effects/Presets/? With those you can do pan or zoom, not pan and zoom.
Or, are you in the Elements Organizer 12 Slideshow Editor using the pan and zoom effect there? Or, are you using keyframing the Motion Scale property for zoom and the Motion Position property for pan?
Are you asking about photos with landscape or portrait orientation?
The pan and zoom tool does one photo at a time.
Have you read the Adobe documentation on the Pan and Zoom Tool?
http://help.adobe.com/en_US/premiereelements/using/WSeffff8bffc802084-494411db12fd35452dd- 8000.html
Please review and clarify and then we can get into greater details on this.
Thanks.
ATR -
How to perform a QBE in the tree table
Hi,
How can we perform the following actions on the tree table
1) We wanted to display all the enabled children for all the node stamp. There is a column for the child node which can say whether tehy are enabled or not .
we can have an action listener. But how can perform this query in the action listener. How to access all the childern in all the node stamps
2) similarly we we want go back again to display all the children for all the node stamp, jow can we do that.
As per my uderstanding we don't have toolbars filter for the tree table.
any pointer or code snipet will help a lot
Thanks
SantoshHi,
you cannot disable nodes in the sense that they cannot be expanded or selected. What you can do though is to ignore node selections in a custom selection handler or to render the node different (e.g. using an output text component instead of a command link or image etc.). What is your functional requirement for what disabled nodes should not do
Frank -
Unable to expand DG is Lync client - Cannot perform this action, and the cause is unknown.
Hi,
I have a user in our Hong Kong office that is unable to open a distribution group she has added to her Groups. She gets the error message "Cannot perform this action, and the cause is unknown. Contact your support team to investigate."
I can add the group and expand it, so can some of her colleague, and some cannot. Her colleagues who can have the same client and global policy settings as she does.
I read in a similar thread that this could be resolved by confirming the server times on Lync, AD (domain controller checked and Exchange but they were all correct and in sync.
The global policy is set to 250 max contacts - but does a DL count as 1 contact, or does it count all the people within the DG? I am getting HK to confirm she does not have too many contacts but I dont think this is the issue.
Anyone else come across this issue?
PhilYou can run the command Test-CsGroupExpansion to test the ability of a user to employ group expansion.
For the usage of the command, you can check
http://technet.microsoft.com/en-us/library/gg399009.aspx
Lisa Zheng
TechNet Community Support -
How to view all Actions in the Photoshop Actions Panel
My computer crashed and I removed all apps and reinstalled so now none of my actions appear. However I do have a backup file of all of them and want to reinstall but before when I was using cs6 ( Im assuming same thing as CC as it was all on the subscription plan ) I would click actions then the right arrows and it would bring me a big screen of all the actions ( even the ones that were just preloaded in ps ) and it was a big box with all the actions and some options to record etc...Now that box isn't there and it's just a single column drop down menu.
Actions can be loaded and save to any folder. Use the dialog to get to where you have saved your Actions. I never store actions in any Adobe Folder.
-
I do not want to update to Lollipop right now. How can I get rid of the notification that wants me to install. It says 'Install Later' or Install Now. I don't want to do either so how can I get rid of this notification that keeps popping up?
You cannot stop it from popping up.
it will continue every few minutes until its installed.
just keep using the back button near right side of home button. -
How do I get weather in the notification area in iOS 5 on original iPad?
How do I get weather in the notification area in iOS 5 on original iPad?
No, it does not. I tried Weather channel free, and it doesn't work like the weather wedget on iPhone4.
Anyone got anything working on an iPad as it is on iPhone 4?
Thanks. -
How to use the code written in App.Xaml.cs in Windows Phone 8 in Windows Phone 8.1 Universal Apps
i have a App.xaml.cs file in Windows Phone 8.0 , amd i want to use the code in that file to make work with App.xaml.cs file in Windows Phone 8.1 Universal Apps
My Windows Phone 8 App.xaml.cs file is like as below
namespace OnlineVideos
public partial class App : Application
#region Initialization
public static dynamic group = default(dynamic);
public static dynamic grouptelugu = default(dynamic);
public static ShowList webinfo = default(ShowList);
public static WebInformation webinfotable = new WebInformation();
AppInitialize objCustomSetting;
IsolatedStorageSettings settings = IsolatedStorageSettings.ApplicationSettings;
DispatcherTimer timer;
IsolatedStorageFile isoStore = IsolatedStorageFile.GetUserStoreForApplication();
public static bool AdStatus = false;
public App()
UnhandledException += Application_UnhandledException;
if (System.Diagnostics.Debugger.IsAttached)
Application.Current.Host.Settings.EnableFrameRateCounter = true;
//RootFrame.UriMapper = Resources["UriMapper"] as UriMapper;
AppSettings.NavigationID = false;
objCustomSetting = new AppInitialize();
timer = new DispatcherTimer();
Constants.DownloadTimer = timer;
InitializeComponent();
InitializePhoneApplication();
#endregion
#region "Private Methods"
void StartDownloadingShows()
timer.Interval = TimeSpan.FromSeconds(10);
timer.Tick += new EventHandler(timer_Tick);
timer.Start();
void timer_Tick(object sender, EventArgs e)
try
BackgroundWorker worker = new BackgroundWorker();
worker.DoWork += new DoWorkEventHandler(StartBackgroundDownload);
worker.RunWorkerCompleted += new RunWorkerCompletedEventHandler(worker_RunWorkerCompleted);
worker.RunWorkerAsync();
catch (Exception)
void worker_RunWorkerCompleted(object sender, RunWorkerCompletedEventArgs e)
if (AppSettings.StopTimer == "True")
timer.Stop();
AppSettings.StopTimer = "False";
async void StartBackgroundDownload(object sender, DoWorkEventArgs e)
switch (AppSettings.BackgroundAgentStatus)
case SyncAgentStatus.DownloadFavourites:
if (AppSettings.DownloadFavCompleted == false && AppSettings.SkyDriveLogin == true)
Deployment.Current.Dispatcher.BeginInvoke(() =>
timer.Stop();
ReStoreFavourites reStoreFav = new ReStoreFavourites();
await reStoreFav.RestorefavFolder(ResourceHelper.ProjectName);
Deployment.Current.Dispatcher.BeginInvoke(() =>
AppSettings.BackgroundAgentStatus = SyncAgentStatus.UploadFavourites;
timer.Start();
else
AppSettings.BackgroundAgentStatus = SyncAgentStatus.UploadFavourites;
break;
case SyncAgentStatus.UploadFavourites:
bool result = Task.Run(async () => await Storage.FavouriteFileExists("Favourites.xml")).Result;
if (AppSettings.SkyDriveLogin == true && result)
Deployment.Current.Dispatcher.BeginInvoke(() =>
timer.Stop();
UploadFavourites upLoad = new UploadFavourites();
await upLoad.CreateFolderForFav(ResourceHelper.ProjectName);
Deployment.Current.Dispatcher.BeginInvoke(() =>
AppSettings.BackgroundAgentStatus = SyncAgentStatus.DownloadParentalControlPreferences;
timer.Start();
else
AppSettings.BackgroundAgentStatus = SyncAgentStatus.DownloadParentalControlPreferences;
break;
case SyncAgentStatus.RestoreStory:
if (AppSettings.DownloadStoryCompleted == false && AppSettings.SkyDriveLogin == true && (ResourceHelper.ProjectName == "Story Time" || ResourceHelper.ProjectName == "Vedic Library"))
Deployment.Current.Dispatcher.BeginInvoke(() =>
timer.Stop();
RestoreStory restore = new RestoreStory();
//if (ResourceHelper.ProjectName == "Story Time")
await restore.RestoreFolder("StoryRecordings");
//else
// await restore.RestoreFolder("VedicRecordings");
Deployment.Current.Dispatcher.BeginInvoke(() =>
AppSettings.BackgroundAgentStatus = SyncAgentStatus.UploadStory;
timer.Start();
else
AppSettings.BackgroundAgentStatus = SyncAgentStatus.UploadStory;
break;
case SyncAgentStatus.UploadStory:
if (AppSettings.SkyDriveLogin == true && (ResourceHelper.ProjectName == "Story Time" || ResourceHelper.ProjectName == "Vedic Library"))
Deployment.Current.Dispatcher.BeginInvoke(() =>
timer.Stop();
UploadStory st = new UploadStory();
//if (ResourceHelper.ProjectName == "Story Time")
await st.CreateFolder("StoryRecordings");
//else
// await st.CreateFolder("VedicRecordings");
Deployment.Current.Dispatcher.BeginInvoke(() =>
AppSettings.BackgroundAgentStatus = SyncAgentStatus.DownloadFavourites;
timer.Start();
else
AppSettings.BackgroundAgentStatus = SyncAgentStatus.DownloadFavourites;
break;
default:
ShowDownloader.StartBackgroundDownload(timer);
break;
#endregion
#region "Application Events"
private void pop_Opened_1(object sender, EventArgs e)
DispatcherTimer timer1 = new DispatcherTimer();
timer1.Interval = TimeSpan.FromSeconds(5);
timer1.Tick += timer1_Tick;
timer1.Start();
void timer1_Tick(object sender, EventArgs e)
(sender as DispatcherTimer).Stop();
Border frameBorder = (Border)VisualTreeHelper.GetChild(Application.Current.RootVisual, 0);
Popup Adc = frameBorder.FindName("pop") as Popup;
Adc.IsOpen = false;
private void Application_Launching(object sender, LaunchingEventArgs e)
SQLite.SQLiteAsyncConnection conn = new SQLite.SQLiteAsyncConnection(Constants.DataBaseConnectionstringForSqlite);
Constants.connection = conn;
AppSettings.AppStatus = ApplicationStatus.Launching;
AppSettings.StopTimer = "False";
objCustomSetting.CheckElementSection();
SyncButton.Login();
if (AppSettings.IsNewVersion == true)
AppSettings.RatingUserName = AppResources.RatingUserName;
AppSettings.RatingPassword = AppResources.RatingPassword;
AppSettings.ShowsRatingBlogUrl = AppResources.ShowsRatingBlogUrl;
if (ResourceHelper.AppName == Apps.Online_Education.ToString() || ResourceHelper.AppName == Apps.DrivingTest.ToString())
AppSettings.QuizRatingBlogUrl = AppResources.QuizRatingBlogUrl;
AppSettings.LinksRatingBlogUrl = AppResources.LinksRatingBlogUrl;
AppSettings.ShowsRatingBlogName = AppResources.ShowsRatingBlogName;
AppSettings.LinksRatingBlogName = AppResources.LinksRatingBlogName;
if (ResourceHelper.AppName == Apps.Online_Education.ToString() || ResourceHelper.AppName == Apps.DrivingTest.ToString())
AppSettings.QuizLinksRatingBlogName = AppResources.QuizLinksRatingBlogName;
Constants.UIThread = true;
group=OnlineShow.GetTopRatedShows().Items;
grouptelugu = OnlineShow.GetRecentlyAddedShows().Items;
Constants.UIThread = false;
StartDownloadingShows();
private void Application_Activated(object sender, ActivatedEventArgs e)
AppSettings.AppStatus = ApplicationStatus.Active;
if (ResourceHelper.AppName == Apps.Kids_TV_Pro.ToString())
AppSettings.ShowAdControl = false;
private void Application_Deactivated(object sender, DeactivatedEventArgs e)
AppSettings.AppStatus = ApplicationStatus.Deactive;
AppState.RingtoneStatus = "TombStoned";
private void Application_Closing(object sender, ClosingEventArgs e)
AppSettings.AppStatus = ApplicationStatus.Closing;
private void Application_UnhandledException(object sender, ApplicationUnhandledExceptionEventArgs e)
FlurryWP8SDK.Api.LogError("Error at Application_UnhandledException in App.xaml.cs", e.ExceptionObject.InnerException);
if (System.Diagnostics.Debugger.IsAttached)
System.Diagnostics.Debugger.Break();
else
Exceptions.SaveOrSendExceptions("Exception in Application_UnhandledException Method In App.xaml.cs file.", e.ExceptionObject);
e.Handled = true;
return;
#endregion
#region Phone application initialization
public PhoneApplicationFrame RootFrame { get; private set; }
// Avoid double-initialization
private bool phoneApplicationInitialized = false;
// Do not add any additional code to this method
private void InitializePhoneApplication()
if (phoneApplicationInitialized)
return;
// Create the frame but don't set it as RootVisual yet; this allows the splash
// screen to remain active until the application is ready to render.
RootFrame = new PhoneApplicationFrame();
if (App.Current.Resources["AdVisible"] as string == "True")
RootFrame.Style = App.Current.Resources["RootFrameStyle"] as Style;
RootFrame.ApplyTemplate();
RootFrame.Navigated += CompleteInitializePhoneApplication;
// Handle navigation failures
RootFrame.NavigationFailed += RootFrame_NavigationFailed;
// Ensure we don't initialize again
phoneApplicationInitialized = true;
//NonLinearNavigationService.Instance.Initialize(RootFrame);
private void RootFrame_NavigationFailed(object sender, NavigationFailedEventArgs e)
if (System.Diagnostics.Debugger.IsAttached)
System.Diagnostics.Debugger.Break();
else
Exceptions.SaveOrSendExceptions("Exception in RootFrame_NavigationFailed Method In App.xaml.cs file.", e.Exception);
e.Handled = true;
return;
// Do not add any additional code to this method
private void CompleteInitializePhoneApplication(object sender, NavigationEventArgs e)
// Set the root visual to allow the application to render
if (RootVisual != RootFrame)
RootVisual = RootFrame;
// Remove this handler since it is no longer needed
RootFrame.Navigated -= CompleteInitializePhoneApplication;
#endregion
Mohan Rajesh KomatlapalliBasically you are asking as how to port silverlight to Xaml (RT). Go one by one converting each API from silverlight to XAML, like IsolatedStorage isn't there in RT, so look for its alternative etc.
See here the namespace/class mappings : Windows Phone Silverlight to Windows Runtime namespace and class mappings
http://developer.nokia.com/community/wiki/Using_Crypto%2B%2B_library_with_Windows_Phone_8 -
I've lost my iPhone 4... How can I find it when the device is off linesmen using "find my iPhone app"????? Any way of getting a location from it?????
No. It must be online in order to locate it.
What To Do If Your iDevice Is Lost Or Stolen
iPhone, iPod Touch, and iPad
If you activated Find My Phone before it was lost or stolen, you can track it only if it is connected to the Internet by Wi-Fi or cellular. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. iCloud- Use Lost Mode
6. What to do if your iOS device is lost or stolen
7. 6 Ways to Track and Recover Your Lost/Stolen iPhone
8. Find My iPhone
9. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices) -
My messages won't say the contact name only shows the phone number, how do you change this when the contact is in my phone under that number already?
I thought that at first, but I have text this person before and had received responses in a timely manner. Its just weird that it all of a sudden removed their name.
Would this affect the delivery of the text message? -
my iphone was stolen, and was erased all the data, how can i block or cut the iphone service on my phone?, my iphone was stolen, and was erased all the data, how can i block or cut the iphone service on my phone?
Only your carrier can Blacklist the phone, so contact them.
-
I have an iPad and an iPhone 6. They are on two different Apple ids. How do I do I change the Apple id on my phone to match my iPad?
On the phone, go to Settings, and change the iCloud and iTunes Store AppleIDs (sign out of the one you have, sign into the one you want). Note that you can't transfer apps from one AppleID to another, so you may still be prompted for your old AppleID password to update any apps that you installed under that ID.
Matt -
How do you download photos from the icloud back to your phone?
How do you download photos from the icloud back to your phone? I want to save my photos on my hard drive and not in the cloud.
iPhoto 9.2 (and higher) can move your Photo Stream files and store them permanately on your computer and move them to your phone.
You can also move them on your iPhone from Photo Stream to Camera Roll.
Maybe you are looking for
-
Hi just bought a new iphone 5c want to put all data from my old iphone 4s on to it plugged in to my apple laptop and its tellng me to download new i tunes version 11.1 which I have done plugged in again to transfer the data and now its telling me th
-
Install of Report Generation Toolkit without Microsoft Office previously installed.
After installing "LabVIEW Report Generation Toolkit for Microsoft Office Version 1.1.3" on a computer without Microsoft Office I noticed that the Report Generation VI palette does not include the "Excel & Word" specific VI's, even though I have "Exce
-
[JAXM] Several call to same servlet does not work
I have a working jaxm client, which works fine. But for test purpose I wanted to send several requests to my server using the same connection. If I do // Send the message reply = connection.call(message, endpoint); it works fine. But if I try this://
-
Table name to find out the application name
In table WWV_FLOW_USER_ACTIVITY_LOG there is a column called flow_id ,which is the application id .I want to know which is the table to find out the application name for a flow_id. Thanks in advance, Madhuri
-
Unable to Run diagnostics after 12.1.3 upgrade from 11.5.10.2
Hi Gurus, We have recently upgraded our application to 12.1.3 from 11.5.10.2 After the upgarde we are unable to run diagnostics at all. We are getting the following error while running diagnostics - Unexpected error occured while executing the test.