How to point at a word table using forms  Ole and Word Document

Hello.
I like to know how to position at a word table and send data from a forms module using ole. I have done something similar before using bookmarks.It's easy and it works. My requirement now is to send data from a forms module to a word document, but this time, the word document will have bookmarks and a word table needs to be filled from data from the database. Just don't know how to get , access, reference the word table from forms.
I'm still using forms6i in C/S mode.
Help will be greatly appreciated ...!.
Best regards, Luis ...!

Hi Luis,
The VBA code for updating the cell found at row three, column two of the first table, of the active document is as follows:
   ActiveDocument.Tables(1).Cell(3,2).Select
   Selection.TypeText("Hello, world!")I haven't time to convert it to OLE2, but hopefully it will at least give you an idea.
Eric Adamson
Lansing, Michigan

Similar Messages

  • How to select data from a table using a date field in the where condition?

    How to select data from a table using a date field in the where condition?
    For eg:
    data itab like equk occurs 0 with header line.
    select * from equk into table itab where werks = 'C001'
                                                      and bdatu = '31129999'.
    thanks.

    Hi Ramesh,
    Specify the date format as YYYYMMDD in where condition.
    Dates are internally stored in SAP as YYYYMMDD only.
    Change your date format in WHERE condition as follows.
    data itab like equk occurs 0 with header line.
    select * from equk into table itab where werks = 'C001'
    and bdatu = <b>'99991231'.</b>
    I doubt check your data base table EQUK on this date for the existince of data.
    Otherwise, just change the conidition on BDATU like below to see all entries prior to this date.
    data itab like equk occurs 0 with header line.
    select * from equk into table itab where werks = 'C001'
    and <b> bdatu <= '99991231'.</b>
    Thanks,
    Vinay
    Thanks,
    Vinay

  • How to find max(time) from table using group by

    how to find max(time) from table using group by
    select var max(time)
              from table
              into (var1, time1)
               where .....
                 group by var.
    it is fetching record which is top in table.
    if u can help?
    regards.

    No this will fetch the maximum time from teh table.
    select var max(time)
    from table xxxx
    into (var1, time1)
    where .....
    group by var.
    Refer this code
    TABLES SBOOK.
    DATA:  COUNT TYPE I, SUM TYPE P DECIMALS 2, AVG TYPE F.
    DATA:  CONNID LIKE SBOOK-CONNID.
    SELECT CONNID COUNT( * ) SUM( LUGGWEIGHT ) AVG( LUGGWEIGHT )
           INTO (CONNID, COUNT, SUM, AVG)
           FROM SBOOK
           WHERE
             CARRID   = 'LH '      AND
             FLDATE   = '19950228'
           GROUP BY CONNID.
      WRITE: / CONNID, COUNT, SUM, AVG.
    ENDSELECT.

  • I need to play a song on a Keynote presentation, how do I do this ? I use to drag and drop the mp3 in Keynote but it stops playing when the slide move to the other one... how can I make the song keep playing through the whole presentation ? Thanks.

    I need to play a song in a row in a Keynote presentation, how do I do this ? I use to drag and drop the mp3 in Keynote but it stops playing when the slide move to the other one... how can I make the song keep playing through out the presentation ?
    Thanks.

    Drag the file into the audio window in the Document inspector...

  • How to upload a file into server using j2ee jsp and servlet with bean?

    How to upload a file into server using j2ee jsp and servlet with bean? Please give me the reference or url about how to do that. If related to struts is more suitable.
    Anyone help me please!

    u don't need j2ee and struts to do file uploading. An example is as such
    in JSP. u use the <input> file tag like
    <input type="file"....>You need a bean to capture the file contents like
    class FileUploadObj {
        private FormFile srcFile;
        private byte[] fileContent;
        // all the getter and setter methods
    }Then in the servlet, you process the file for uploading
        * The following loads the uploaded binary data into a byte Array.
        FileUploadObj form = new FileUploadObj();
        byte[] byteArr = null;
        if (form.signFile != null) {
            int filesize = form.srcFile.getFileSize();
            byteArr = new byte[filesize];
            ByteArrayInputStream bytein = new ByteArrayInputStream (form.srcFile.getFileData());
            bytein.read(byteArr);
            bytein.close();
            form.setFileContent(byteArr);
        // Write file content using Writer class into the destination file in the server.
        ...

  • HT204350 Incorrect link to "OS X: How to migrate data from another Mac using Mountain Lion and earlier"

    Incorrect link to "OS X: How to migrate data from another Mac using Mountain Lion and earlier". Should be http://support.apple.com/kb/HT6025

    I think the OP is saying OS X: How to migrate data from another Mac using Mountain Lion and earlier (which should be a link to HT4889) just links back to OS X: How to migrate data from another Mac using Mavericks (HT5872).
    It does indeed do that, & HT4889 seems to be MIA.

  • Is it possible to insert tables using Form Central?

    Is it possible to insert tables using Form Central?

    Unfortuately Formscentral does not support tables at this time.
    Andrew

  • HT1338 Yesterday, I purchased Mountain Lion OSX and tried to download it but I don't think it worked.  How can I tell if I am using Mountain Lion and how do I get help if the download was unsuccessful?

    Yesterday, I purchased Mountain Lion OSX and tried to download it but I don't think the download worked.  How can I tell if I am using Mountain Lion and how do I get help if the download was unsuccessful?

    Click your Apple menu icon top left corner of your screen.
    From the drop down menu click About This Mac.
    If Mountain Lion is installed, it will say:  v10.8
    If not, launch the App Store. From the App Store menu bar click Store > Check for Unfinished Downloads
    FYI ..  for downloading Mountain Lion from the App Store, a high speed (broadband) internet connection is strongly recommended by Apple as noted here > iTUNES STORE - MAC APP STORE - TERMS AND CONDITIONS
    If you need to reinstall OS X or repair the the startup disk Mountain Lion Recovery, that requires broadband access to the internet via Wi-Fi or an Ethernet connection. OS X is downloaded over the internet form Apple when OS X Recovery is used for reinstallation.

  • When I open a pdf file, after a few seconds, it hides the toolbar and I don't know how to get it back.  I use multiple monitors and, without being able to grab the toolbar, I am unable to move the pdf file to a different monitor.  How do I stop this?

    When I open a pdf file, after a few seconds, it hides the toolbar and I don't know how to get it back.  I use multiple monitors and, without being able to grab the toolbar, I am unable to move the pdf file to a different monitor.  How do I stop this?

    Does Firefox switch to full screen if you press F11 ?
    You can also try the F10 key to see if that brings up the menu bar.
    * If the above steps didn't help then see http://kb.mozillazine.org/Corrupt_localstore.rdf
    Note: Do not delete localstore.rdf in the program folder (Windows: "C:\Program Files\Mozilla Firefox\defaults\profile\") (Mac: "/Applications/Firefox.app/defaults/profile/")

  • I am currently receiving error message "Microsoft Excel quit unexpectedly".  Any suggestions on how to fix?  I notice same message for powerpoint and word.

    I am currently receiving error message "Microsoft Excel quit unexpectedly".  Any suggestions on how to fix?  I notice same message for powerpoint and word.

    That generally has to do with data corruption.   Is your data backed up?
    What version of Office do you have?
    What Mac operating system?

  • How can my laptop access the downloaded files like mp3 and pdf documents which are in my iphone 4G?

    how can my laptop access the downloaded files like mp3 and pdf documents which are in my iphone?

    Yes you will need to NAT at some point to go from private to public address space. Here is a basic configuration if you are interested:
    interface F8
    ip nat inside
    interface G0
    ip nat outside
    ip access-list standard NAT
     permit 192.168.11.0 0.0.0.255
    ip nat inside source list NAT interface G0 overload

  • Unable to turn column headers bold in Word table using VB Script

    I have created a table in Microsoft Word 2010 using VB Script (this is via the script engine that forms part of HP Quality Centre functionality).  The table itself is OK, 2 columns with centred headers.  However, I am unable to make the column
    headers bold.  I have spent hours searching the net and trying various options to no avail can somebody please help me.
    Set objWord = CreateObject("Word.Application")
    Set objDocument = objword.Documents.Open(Src_Dir & template_file
    Const wdAlignParagraphCenter = 1'var to control justification of the table columns
    Const NUMBER_OF_ROWS = 1 'number of rows in intial table
    Const NUMBER_OF_COLUMNS = 2 'number of colums in the intitial table
    'search for the "TAA_TABLE" bookmark embedded in the document template, this is where the table will be created
    Set objRange=objDocument.Bookmarks("TAA_TABLE").Range
    'create the table
    objDocument.Tables.Add objRange, NUMBER_OF_ROWS, NUMBER_OF_COLUMNS
    Set objTable = objDocument.Tables(2)
    'populate column headers
    objTable.Cell(1, 1).Range.Font.Bold = True
    objTable.Cell(1, 1).Range.Text = "Sub Contractor"
    objTable.Cell(1, 2).Range.text = "TAA Number"
    'centre the column headers
    objDocument.Tables(2).Rows(1).Select
    Set objSelection = objWord.Selection
    objSelection.ParagraphFormat.Alignment = wdAlignParagraphCenter
    'format the table with plain grid lines
    objTable.AutoFormat(16)
    'set the column widths
    objTable.Columns(1).Setwidth 230,0
    objTable.Columns(2).Setwidth 230,0
    Any help is graetfully appreciated, as this is driving me wild.
    Cheers,

    Hi Citronax,
    I haved noticed that you used objTable.AutoFormat to format the table. Based on my understanding, this fuction will applie a predefined look to a table.
    After I move the code which bolder the text behind this line of code, it works well for me.
    'format the table with plain grid lines
    objTable.AutoFormat (16)
    objTable.Cell(1, 1).Range.Font.Bold = True
    Regards & Fei
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to read records from Relationship table using ABAP API's

    Hi All,
    I need to retrieve the records from Relationship table. In Java API's I came to know there is an option to retrieve this. I could not find anything in ABAP API's. Is there any option in ABAP API's to do this.
    Please Suggest.
    Thank You,
    Gajendra.

    Hi Gajendra,
    You can mainly read records from MDM (in a DDIC structure) using ABAP API's using the following function modules/methods:
    1. RETRIEVE: This is used to generically retrieve records from tables. Attributes and Values can also be retrieved.
    2. RETRIEVE SIMPLE: Retrieve records from MDM in a simple way.( simple data types).
    3. RETRIEVE CHECKOUT: Retrieves all checked out ID's.
    4. RETRIEVE ATTRIBUTES: Retrieves attribute(s) from a Taxanomy table.
    You will find all these methods in the following interface
    Interface : IF_MDM_CORE_SERVICES
    Hope it helps.
    *Please reward points if found useful.
    Thanks and Regards
    Nitin Jain

  • How to  load data into user tables using DIAPIs?

    Hi,
    I have created an user table using UserTablesMD object.
    But I don't have know how to load data into this user table. I guess I have to use UserTable object for that. But I still don't know how to put some data in particular column.
    Can somebody please help me with this?
    I would appreciate if somebody can share their code in this regard.
    Thank you,
    Sudha

    You can try this code:
    Dim lRetCode As Long
    Dim userTable As SAPbobsCOM.UserTable
    userTable = pCompany.UserTables.Item("My_Table")
    'First row in the @My_Table table
    userTable.Code = "A1"
    userTable.Name = "A.1"
    userTable.UserFields.Fields.Item("U_1stF").Value = "First row value"
    userTable.Add()
    'Second row in the @My_Table table
    userTable.Code = "A2"
    userTable.Name = "A.2"
    userTable.UserFields.Fields.Item("U_1stF").Value = "Second row value"
    userTable.Add()
    This way I have added 2 lines in my table.
    Hope it helps
    Trinidad.

  • How to justify the values in table using report generation tool kit

    Hi
    How can we align the values in excel table using report generation toolkit.
    like left,right,center.
    Regards,
    hari
    Attachments:
    Report_excel.vi ‏34 KB
    New Bitmap Image.JPG ‏134 KB

    Hi,
    A trigger is designed to be a part of a transaction, not it's end.
    It is like following these steps (not really accurate, but should give an idea):
    1. programA issues INSERT statement on tableA
    2. 'control' goes over to the database
    3. constraint checks happen
    4. the associated triggers on tableA do their work (e.g. fetching a sequence value for a primary key)
    5. 'control' goes back to programA
    6. programA decides if a commit (no error occurred) or a rollback (error case) has to be issued.
    Did this help? Probably not, I'm not happy with what I wrote, but anyway... :)

Maybe you are looking for