How to populate "Expected (Design Steps)" in HP Quality Center Output

I am using UPK 3.6.1 Client version, and one of our uses is to export UPK topics to HP Quality Center output.
I see that there is a column titled "Expected (Design Steps) but it comes out blank. I'd like to add the expected result of each step to use in test script.
When I look at the ColumnSpec.xml file, it shows that this information is not coming from anywhere:
<header xml:id="ExpectedColHeader">Expected (Design Steps)</header>
<data repeat="yes" type="General" source="" />
Does anyone know of a field that I could re-purpose to populate that information?
Thank you.

On my OJ Pro 8600, When I go to print a # 10 envelope, it feeds the envelope through and then prints the address on a letter page. I was forced to set the printer preferences to #10 envelope, and within Word, set the paper type to # 10 envelope, set Word up for center feed, and then put everything back to print normally. ON my 6500 all I had to do was hit print. There must be a way to print single envelopes without jumping through all these hoops!!

Similar Messages

How to configure SolMan for interfacing with SAP Quality Center

Hello everyone,
Our company has only recently acquired and activated the permanent license for SAP Quality Center by HP. We would like QC to interface with SAP Solution Manager. My question is how to perform the configuration steps to make the interface work with Quality Center? I need to set up the IMG addon SM_QC_AD, which can be found under the transaction SPRO, but I need documentation on which steps to take and why.
I am often referred to SAP note 1059350 and/or the configuration guide, but these only say that I should configure the IMG but not how.
There is a SAP tutor available on the service marketplace, but I think it's rather uninformative.
Can I find better documentation elsewhere?

Hi ,
[Configuration Guide SAP adapter for SAP Quality Center by HP|https://websmp101.sap-ag.de/~sapdownload/011000358700000612662007E/Adapter_Configuration_.pdf] might be useful.
Check [Master guide|https://websmp201.sap-ag.de/~sapdownload/011000358700000612672007E/Adapter_Master_Guide.pdf] also.
Regards
Naveen
Edited by: Naveen kumar Palanichamy on Feb 19, 2009 6:38 AM

What are all the designing steps to make printable puzzles?

The puzzles are usually the difficult task to perform.... While it is in printable form, how can add the designing steps to make it effective? Share your ideas....!

I'm not sure how the pieces themselves are created ( i.e., number of pieces and their shapes ). But, a die needs to be created in order to cut the pieces out of a thick card stock. The picture itself is, obviously, a photograph that is printed on a coated sheet and laminated to the card stock. So, the puzzle itself can be a layered Illustrator file with a Placed photograph. Your die cut stamp needs to be on a separate layer. Like that, see?

How to use report designer using bex analyser ineed screeenshots steps

how to use report designer using bex analyser ineed screeenshots steps

Please try to search and stop asking for all types of screen shots. Thanks!

How to populate Java Beans List from the DB ?

Hi,
I have three tables called State,District and College.
Assume, State table has fields statid,statename,statedescr
District table has fields districtId,districtname,districtdescr and stateid
College table has fields collegeid,collegename,collegedescr and districtid
and all ids for the respective tables are primary keys .. and District and College tables have foriegn keys as expected...
I want to send the whole information to the front end... I had designed three beans StateBean,DistrictBean and CollegeBean.. where all the three beans will have the related fiields and respective getter and setter methods like below
StateBean -- stateid,stateName,stateDesc and DistrictBeanList
DistrictBean -- districtid,districtName,districtDesc and CollegeBeanList
CollegeBean -- collegeid,collegeName,collegeDesc
I would like to have the JDBC code (any driver,any DB) so that I need to build one StateBeanList (collection of all the statebeans information) ... (like how to write the query to get the whole information from the DB and populate the same into one list..(Query or queries + resultset operation)
I hope you understand my problem ...
Please let me know if I have to be more clear...
Thanks in Advance,
Vidhya...

Thanks Sachin,
Atleast you understand something of my requirement..
But Actually I want the logic like
if the query is like
select * from State
while(rs.next) {
StateBean object = new StateBean(); // StateBean
object.yourcorrespondingsetter(rs.getString(1));
object.yourcorrespondingsetter(rs.getString(2));
object.yourcorrespondingsetter(rs.getString(3));
object.setDistrictBeanList(districtbeanlistalreadypopulated); // how to populate the list of districtBeans list before ....
listobject.add(object ); // object internally has to have districtBean list, so the district bean list has to be loaded with all the distrct Beans in which every DistrictBean will be loaded with list of CollegeBeans ... Which district belongs to which state and which college belongs which district is all there in the table information ...
Now I want the query or queries to do that .... Can someone help me ?
Please let me know if I have to be more clear...
}

How to populate internal table field with text data?

Hello Experts,
I was able to load text file to a internal table but data is not populating each field. Can someone help me how to populate each field of internal table from text file?
Here is the text file:
io_name, io_type, io_txsht, io_txlng, io_datatype, io_length
ZEA_IO1, CHA, IO Test,     IO Test 1, CHAR,       20
ZEA_IO2, CHA, IO Test,     IO Test 2, CHAR,       20
Here is the Code:
*& Report ZAS_BAPI_TEST                                               *
*& InfoObject Creation through BAPI.
*& Read the Text file, call a BAPI to create InfoObjects.              *
*& Text file will hold the Info Object Structure. Text file will be    *
*& located either work station or local PC.
*& Step 1. Create internal table to hold InfoObject structure          *
*& Step 2. Retrieve/Load text file into Internal Table structure       *
*& Step 3. Call BAPI Function to Create IO                             *
*& Step 4. Call BAPI Function to Activate IO                           *
REPORT ZAS_BAPI_TEST                           .
Make data separator a comma
CONSTANTS: gc_tab TYPE c VALUE ','.
      Declaring Internal table for creating InfoObject
DATA: p_file TYPE string.
DATA: BEGIN OF itab-bapi OCCURS 0,
        io_name like BAPI6108-infoobject,
        io_type like BAPI6108-type,
        io_txsht like BAPI6108-textshort,
        io_txlng like BAPI6108-textlong,
        io_datatype like BAPI6108-datatp,
        io_length like BAPI6108-intlen,
      END OF itab-bapi.
DATA ibapi LIKE STANDARD TABLE OF itab-bapi.
PARAMETERS: sel_file(1500) TYPE c default ' ' OBLIGATORY LOWER CASE.
      PUT THE TEXT FILE PATH TO P_FILE
p_file = sel_file.
     Copy the file from the workstation to the server        ****
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    filename                = p_file
               FILETYPE                = 'ASC'
               HAS_FIELD_SEPARATOR     = SPACE
               HEADER_LENGTH           = 0
               DAT_MODE                = SPACE
               CODEPAGE                = SPACE
               IGNORE_CERR             = ABAP_TRUE
               REPLACEMENT             = '#'
               READ_BY_LINE            = 'X'
             IMPORTING
               FILELENGTH              =
               HEADER                  =
TABLES
    data_tab                = itab-bapi[]
EXCEPTIONS
    file_open_error         = 1
    file_read_error         = 2
    no_batch                = 3
    gui_refuse_filetransfer = 4
    invalid_type            = 5
    no_authority            = 6
    unknown_error           = 7
    bad_data_format         = 8
    header_not_allowed      = 9
    separator_not_allowed   = 10
    header_too_long         = 11
    unknown_dp_error        = 12
    access_denied           = 13
    dp_out_of_memory        = 14
    disk_full               = 15
    dp_timeout              = 16
    not_supported_by_gui    = 17
    error_no_gui            = 18
    OTHERS                  = 19.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
MESSAGE e012(zea_spms) WITH 'Method' 'GUI_UPLOAD' sy-subrc.
&1 &2 issued return code &3
   ELSE.
     pit_data[] = lit_data[].
   ENDIF.
ENDIF.
loop at itab-bapi.
write: /5 itab-bapi-io_name,
           20 itab-bapi-io_type,
           30 itab-bapi-io_txsht,
           50 itab-bapi-io_txlng,
           75 itab-bapi-io_datatype,
           85 itab-bapi-io_length.
endloop.
      SELECT THE LOCATION FOR TEXT FILE
AT SELECTION-SCREEN ON VALUE-REQUEST FOR sel_file.
CALL FUNCTION 'WS_FILENAME_GET'
    EXPORTING
      def_filename     = ''
      def_path         = 'C:\'
      mask             = ',Documentos de texto (*.txt), *.txt.'
      mode             = ''
    IMPORTING
      filename         = p_file
    EXCEPTIONS
      inv_winsys       = 1
      no_batch         = 2
      selection_cancel = 3
      selection_error = 4
      OTHERS           = 5.
find '.txt' IN p_file.
if sy-subrc <> 0.
    concatenate p_file '.txt' into sel_file.
else.
    sel_file = p_file.
endif.
      Create InfoObject through BAPI Function
*CALL FUNCTION 'BAPI_IOBJ_CREATE'.
*IMPORTING
    VALUE(DETAILS) LIKE BAPI6108 STRUCTURE BAPI6108
*EXPORTING
    VALUE(INFOOBJECT) LIKE BAPI6108-INFOOBJECT
    VALUE(RETURN) LIKE BAPIRET2 STRUCTURE BAPIRET2
TABLES
     COMPOUNDS STRUCTURE BAPI6108CM OPTIONAL
     ATTRIBUTES STRUCTURE BAPI6108AT OPTIONAL
     NAVIGATIONATTRIBUTES STRUCTURE BAPI6108AN OPTIONAL
     ATRNAVINFOPROVIDER STRUCTURE BAPI6108NP OPTIONAL
     HIERARCHYCHARACTERISTICS STRUCTURE BAPI6108HC OPTIONAL
     ELIMINATION STRUCTURE BAPI6108IE OPTIONAL
     RETURNTABLE STRUCTURE BAPIRET2 OPTIONAL
      Activate InfoObject through BAPI Function
CALL FUNCTION 'BAPI_IOBJ_ACTIVATE_MULTIPLE'
*ENDFORM.                    " RETRIEVE_DATASET
I appreciate your help.
Regards,
Mau

I have used tab delimited file.
Here are file contents
io_name     io_type     io_txsht     io_txlng     io_datatype     io_length
ZEA_IO1     CHA     IO Test     IO Test 1     CHAR     20
ZEA_IO2     CHA     IO Test     IO Test 2     CHAR     20
And here is program used
*& Report ZAS_BAPI_TEST *
*& InfoObject Creation through BAPI.
*& Read the Text file, call a BAPI to create InfoObjects. *
*& Text file will hold the Info Object Structure. Text file will be *
*& located either work station or local PC.
*& Step 1. Create internal table to hold InfoObject structure *
*& Step 2. Retrieve/Load text file into Internal Table structure *
*& Step 3. Call BAPI Function to Create IO *
*& Step 4. Call BAPI Function to Activate IO *
REPORT ZAS_BAPI_TEST .
Make data separator a comma
CONSTANTS: gc_tab TYPE c VALUE ','.
Declaring Internal table for creating InfoObject
DATA: p_file TYPE string.
DATA: BEGIN OF itab-bapi OCCURS 0,
io_name like BAPI6108-infoobject,
io_type like BAPI6108-type,
io_txsht like BAPI6108-textshort,
io_txlng like BAPI6108-textlong,
io_datatype like BAPI6108-datatp,
io_length like BAPI6108-intlen,
END OF itab-bapi.
DATA ibapi LIKE STANDARD TABLE OF itab-bapi.
PARAMETERS: sel_file(1500) TYPE c default ' ' OBLIGATORY LOWER CASE.
PUT THE TEXT FILE PATH TO P_FILE
p_file = sel_file.
Copy the file from the workstation to the server ****
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = p_file
<b>FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'</b>
TABLES
data_tab = itab-bapi[]
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
not_supported_by_gui = 17
error_no_gui = 18
OTHERS = 19.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
MESSAGE e012(zea_spms) WITH 'Method' 'GUI_UPLOAD' sy-subrc.
&1 &2 issued return code &3
ELSE.
pit_data[] = lit_data[].
ENDIF.
ENDIF.
loop at itab-bapi.
write: /5 itab-bapi-io_name,
20 itab-bapi-io_type,
30 itab-bapi-io_txsht,
50 itab-bapi-io_txlng,
75 itab-bapi-io_datatype,
85 itab-bapi-io_length.
endloop.
SELECT THE LOCATION FOR TEXT FILE
AT SELECTION-SCREEN ON VALUE-REQUEST FOR sel_file.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_filename = ''
def_path = 'C:\'
mask = ',Documentos de texto (*.txt), *.txt.'
mode = ''
IMPORTING
filename = p_file
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
find '.txt' IN p_file.
if sy-subrc <> 0.
concatenate p_file '.txt' into sel_file.
else.
sel_file = p_file.
endif.
Create InfoObject through BAPI Function
*CALL FUNCTION 'BAPI_IOBJ_CREATE'.
*IMPORTING
VALUE(DETAILS) LIKE BAPI6108 STRUCTURE BAPI6108
*EXPORTING
VALUE(INFOOBJECT) LIKE BAPI6108-INFOOBJECT
VALUE(RETURN) LIKE BAPIRET2 STRUCTURE BAPIRET2
TABLES
COMPOUNDS STRUCTURE BAPI6108CM OPTIONAL
ATTRIBUTES STRUCTURE BAPI6108AT OPTIONAL
NAVIGATIONATTRIBUTES STRUCTURE BAPI6108AN OPTIONAL
ATRNAVINFOPROVIDER STRUCTURE BAPI6108NP OPTIONAL
HIERARCHYCHARACTERISTICS STRUCTURE BAPI6108HC OPTIONAL
ELIMINATION STRUCTURE BAPI6108IE OPTIONAL
RETURNTABLE STRUCTURE BAPIRET2 OPTIONAL
Activate InfoObject through BAPI Function
CALL FUNCTION 'BAPI_IOBJ_ACTIVATE_MULTIPLE'
*ENDFORM. " RETRIEVE_DATASET
This program is working fine. You can test it.
Only problem is as the column headings are big for some columns, they are getting truncated which you can always change by changing the column width in declaration
Please let me know if this helps.
ashish

How to populate default values for BP (FPP1 is tcode in ECC 6.0)

Hello ,
I am creating BP in ECC 6.0 using Fpp1 tcode. How to populate default values when i hit create BP person.   any badi triggers when we are creating BP in ECC.
guide me.

Hi Premanand,
To default fields, you need to do the following steps :
1. Create a Z module e.g. : Z_DEFAULT_FIELDS_DIALOG.
2. Enter suppose you want to default fiels Name, title, country, write code as follows :
DATA : ls_busdefault LIKE busdefault.
ls_busdefault-title = '0002'.
ls_busdefault-mc_name1 = 'TEST'.
ls_busdefault-mc_name2 = 'Default'.
ls_busdefault-country = 'IN'.
    CALL FUNCTION 'BUP_BUPA_FIELDVALUES_SET'
    EXPORTING
      i_busdefault = ls_busdefalut.
3. Now got to transaction BUS7, select event ISDAT, click on Event--> function modules.
4. Register your Z module Z_DEFAULT_FIELDS_DIALOG in this list, Save.
This should solve your problem. Please note : You can only default those fields contained in structure BUSDEFAULT.
Cheers,
Rishu.

How to populate city information in a brand new EBS R12 environment?

How to populate city information (location) in a brand new EBS R12 environment?
What other basic setup needs to be done before setting up GL in this new EBS R12 environment?
Thanks,
SR

Pl do not post duplicates - What are the steps involved in configuring Oracle EBSR12 after installation
Pl continue the discussion in your original thread

How to use CrossReference and DVM in ODI &how to populate data into Xref

Can any one tell how to use Domain Value Maps and Cross Referencing in ODI?
DVM or Domain Value Map are created and used in ESB console of SOA suite.
My actual requirement is as follows:
The below steps describe loading data from ERP Application 1 to ERP Application 2.
1. The Source Application ERP APP1, populates the interface table using their native technology.
2. A job scheduler invokes the Source side ODI Package.
3. ODI then extracts the data from Source Interface table and populates the Target Interface table.
4. After populating the Target interface table the ODI populates the X-ref table with App 1 ID and generated common ID.
5. The ODI either deletes or updates the rows that were processed from the Source interface table.
6. On the Target Application ERP APP2, the native application extracts data from target interface table and populates target database there by generating ERP Application 2 ID.
7. A job scheduler on the Target application invokes the ODI package to populate the Application 2 ID onto the Xref table matching on the Common ID.
I just want to know :
1. How to populate data into the Xref table from Source datastore
2. And if data is successfully laoded from target datastore to actual base table of target then how to populate the target id into the cross reference table.

can anyone suggest me some answer, then it would be of great help?

How to populate new values in JTable?

hello swing experts!!!
i have a problem plz i need your help. tnx.
so here's the scenario.
i have a program that retrieves information from the database and display it in the JTable. i have JTextBox to search users by "Name" and when i click JButton "search" it will populate all the users that has the "Name" in the JTable.
i already know how to populate a JTable at first like giving a JTable(row,column) or a model = new DefaultTableModel(row,col). but
i dont know how to *"Re-populate"* values in the JTable? an algorithm/steps/code snippets on how it will work will be a great help. tnx!

Just a small example :
import java.awt.BorderLayout;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.util.Vector;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JTable;
import javax.swing.table.DefaultTableModel;
public class Testing
     public static void main(String... args)
          final DefaultTableModel model = new DefaultTableModel()
               @Override
               public boolean isCellEditable(int row, int column)
                    return false;
          model.addColumn("One");
          model.addColumn("Two");
          final JTable table = new JTable(model);
          JButton button = new JButton("Click to add data to the table");
          //get your data in a vector from the list you are getting from the database
          final Vector<String> newRow = new Vector<String>();
          newRow.add("Value1");
          newRow.add("Value2");
          button.addActionListener(new ActionListener()
               public void actionPerformed(ActionEvent ae)
                    model.addRow(newRow);
          JFrame frame = new JFrame("Testing");
          frame.getContentPane().add(button, BorderLayout.NORTH);
          frame.getContentPane().add(table, BorderLayout.CENTER);
          frame.setSize(400, 200);
          frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          frame.setLocationRelativeTo(null);
          frame.setVisible(true);
}

How to populate a sharepoint 2010 list from the active directory. How to populate a sharepoint 2010 list with all sharepoint user profiles

How to populate a sharepoint 2010 from the active directory.
I want a list of all the computers in the active directory,
another one with all users.
I want also to populate a sharepoint 2010 list from the sharepoint user profiles.
Thanks
sz

While
the contacts list is usually filled out for contacts that are outside the company, there are times when you would use a contacts list to store internal and external resources. Wouldn’t it be nice if you didn’t have to re-type your internal contacts’
information that are already in the system? Now you can with a little InfoPath customization on the contacts list.
Here’s our plan:
Create the contacts list, and open in InfoPath
Create a data connection to the User Profile web service
Customize the form adding some text, a people picker and a button
Create InfoPath rules that will populate the contact fields from the user fields in the User Profile store
Let’s get going! Before we begin, make sure you have InfoPath 2010 installed locally on your computer. I also want to give credit Laura
Rogers and Darvish Shadravan’s book Using
Microsoft InfoPath 2010 with Microsoft SharePoint 2010 Step by Step. I know it looks like a lot of steps, but it’s easy once you get the hang of it.
So obviously we need a contacts list. If you don’t already have one, go to the SharePoint site where it will live, and create a contacts list.
From the list, click the List tab on the ribbon, then click Customize form:
So now we have our form open in InfoPath 2010. Let’s add our elements to the form.
Above all the fields, let’s add some text instructing users what to do with the the field we’re about to add (.e.g To enter an existing user’s information, choose the user below).
Insert a people picker control by clicking the Person/Group Picker control in the Controls section of the ribbon. This will add a column to the contacts list called group.
Below the people picker, insert a button control from the same section of the ribbon as above. With the button still highlighted, click the Control Tools|Properties tab on the ribbon.
Then in the Label box, change the text to something more appropriate to our task (e.g. Click here to load user data!).
You can drag the button control a little larger to account for the text.
We should end up with something like this:
Before we can populate the fields with user data, we need to create a connection to the User Profile Service.
Add a data connection to the User Profile Service
Click the Data tab on the ribbon, and click the option From Web Service, and From SOAP Web Service.
For the location, enter the URL of your SharePoint site in the following format – http://<site url>/_vti_bin/UserProfileService.asmx?WSDL. Click Next.
Note - for the URL, it can be any SharePoint site URL, not just to the site where your list is.
For the operation, choose GetUserProfileByName. Click Next.
Click Next on the next two screens.
On the final screen, uncheck the box for “Automatically retrieve data when form is opened”. This is because we are going to retrieve the data when the button is clicked, also for performance reasons.
Now we need to wire up the actions on our button to populate the fields with the information for the user in the people picker control.
Tell the form to read the user from the people picker control
Click the Home tab on the ribbon.
Click the button control we created, and under the Rules section of the ribbon, click Manage Rules. Notice the pane appear on the far right.
In the Rules pane, click New –> Action. Change the name to something like “Query and load user data”.
Leave the condition to default (none – rule runs when button is clicked).
Click the Add button next to “Run these actions:”, and choose “Set a field’s value”.
For Field, click the button on the right to load the select a field dialog. Click the Show advanced view on the bottom. At the top, click the drop down and choose the GetUserProfileByName
(Secondary) option. Expand myFields and queryFields to the last option and highlightAccountName. Click ok.
For Value, click the formula icon. On the formula screen, click the Insert Field or Group button. Again click the show advanced view link, but this time leave the data
connection as Main. Expand dataFields, then mySharePointListItem_RW. At the bottom you should see a folder called group (the people picker control we just added to the form). Expand this, then pc:Person,
and highlightAccountId. Click Ok twice to get back to the Rules pane.
If we didn’t do this and just queried the user profile service, it would load the data of the currently logged in user. So we need to tell the form what user to load the data for. We take the AccountID field from the people
picker control and inject into the AccountName query field of the User Profile Service data connection.
Load the user profile service information for the chosen user
Click the Add button next to “Run these actions:”, and choose Query for data.
In the popup, for Data connection, click the one we created earlier – GetUserProfileByName and clickOk.
We’re closing in on our goal. Let’s see our progress. We should see something like this:
Now that we have the user’s data read into the form, we can populate the fields in the contact form. The number of steps to complete will depend on how many fields you want to populate. We need to add an action step for
each field. I’ll show you one example and then you will just repeat the steps for the other fields. Let’s update the Job Title field.
Populate the contact form fields with existing user’s data
Click the Add button next to “Run these actions:”, and choose “Set a field’s value”.
For Field, click the button on the right to load the select a field dialog. Highlight the field Job Title.
For Value, click the formula icon. On the formula screen, click the Insert Field or Group button. Click the Show advanced view on the bottom. At the top, click the
drop down and choose theGetUserProfileByName (Secondary) option. Expand the fields all the way down until you see the Value field. Highlight it but don’t click ok, but click the Filter
Data button, then Add.
For the first dropdown that says Value, choose Select a field or group. The value field will be highlighted, but click the field Name field
under PropertyData. Click Ok.
In the blank field after “is equal to”, click in the box and choose Type text. Then type the text Title.
Click ok until you get back to the Manage Rules pane. The last previous screen will look like this.
We’re going to update common fields that are in the user’s profile, and likely from Active Directory. You can update fields like first and last name, company, mobile and work phone number, etc. For the other fields, the
steps are the same except the Field you choose to update from the form, and the very last step where you enter the text will change. Here’s what the rules look like when we’re done:
We’re all done, good work! You can preview the form and try it now. Click Ctrl+Shift+B to preview the form. Once you’re satisfied, you can publish the form back to the library. Click File –> Quick
Publish. Once it’s done, you will get confirmation:
Now open your form in SharePoint. From the contact list, click Add new item. Type in a name, and click the button and watch the magic happen!

How to populate multiple entries to Bapi Table

Hi all,
How to populate multiple entries to Bapi Table.....
Here is the code(in component controller)
Z_Recr_Apply_Point_Input request = new Z_Recr_Apply_Point_Input(WDModelScopeType.TASK_SCOPE);
       int size = wdContext.nodeApplicants().size();
            for(int i = 0 ; i < size ; i++)
                String isselected = wdThis.wdGetContext().nodeApplicants().getElementAt(i).getAttributeAsText("Appl_Number");
                 if(isselected == "true")
                           com.models.veteranpoint.Zrecr_Aplno appid = new
                                com.models.veteranpoint.Zrecr_Aplno();
                                appid.setAppl_Number(wdContext.nodeApplicants().
                                    getApplicantsElementAt(i).getAppl_Number());
                           request.addApplicants(appid);
I want to pass the selected input field to bapi..
Please tel me where i pass the input field...
Please correct my code...
Thanks & regards
Mathi s

Hi,
Steps to insert multiple entries to BAPI table.
1.Create an instance for BAPI input
2.Bind the instance to the Node of the BAPI input
3.Create instance of the Structure(BAPI table) to which input has to be added.
4.Set the input values to the Structure instance.
5.Add the instance to the BAPI input.
6.Execute
From the given example,I assume Z_Recr_Apply_Point_Input is the BAPI Input and com.epiuse.us.recruitment.models.veteranpoint.Zrecr_Aplno as Structure
Step 1:
Z_Recr_Apply_Point_Input request = new Z_Recr_Apply_Point_Input(WDModelScopeType.TASK_SCOPE);
Step 2:
<b>wdContext.nodeZ_Recr_Apply_Point_Input.bind(request);</b>
Steps 3 & 4:
int size = wdContext.nodeApplicants().size();
for(int i = 0 ; i < size ; i++)
String isselected = wdThis.wdGetContext().nodeApplicants().getElementAt(i).getAttributeAsText("Appl_Number");
if(isselected == "true")
com.epiuse.us.recruitment.models.veteranpoint.Zrecr_Aplno appid = new
com.epiuse.us.recruitment.models.veteranpoint.Zrecr_Aplno();
appid.setAppl_Number(wdContext.nodeApplicants().
getApplicantsElementAt(i).getAppl_Number());
<b>wdContext.currentZ_Recr_Apply_Point_InputElement().modelObject().addRecr_Aplno(appid);</b>
Step 5:
<b>wdContext.currentZ_Recr_Apply_Point_InputElement().modelObject().execute();</b>
Regards,
Viji Priya

How to populate VO based ADF tabledynamically in Oracle 11g?

Hi all
Is there is any way to dynamically populate the values for the VOIterator in Oracle11g? My Requirement is something like, I have deragged the VO from the Data control to the jspx as a ADF table.Whenever page loaded the table will be populated with the values. The same way when page gets loaded user have the option to import the values from the excel sheet and need to display the imprted values on the same ADF table created based on the VO(View Object). I have the code to extract the data from the excel sheet. I just need to know how to populate those excel sheet data on the ADF table based on some VO.I Hope you got what I mean to say
Thanks

Hi Shay
Thanks for your quick reply.My question is not more on how to extract the data from the excel.
My concern is How to add the data dynamically to a VOIterator programatically in the backing bean?
for eg:
I have dragged a VO on to the screen as ADF Table(So whenever page get loaded the data will be displayed on the screen. This is fine )
I want to place a button on top of my screen , and when user clicks on that specific button, in my backing bean i need to populate some data to that VOIterator and get it displayed on the same ADF table which created in above step.
To acomplish this what should I do?
Thanks
Edited by: user616296 on Jan 13, 2009 3:28 PM

How to Populate the Dropdown from the xml file ?

Hi,
According to my requirement, Drop down has to be populated in a form, on selecting an element in the first drop down list, corresponding second drop down values has to be loaded dynamically.
I am using the ReferenceData file, which consists of the Dropdown list values in the form of Key,Value pair. I can able to populate one drop down,but I don't know how to populate the second dropdown dynamically.
can any one please help me to finish this task.

Thanxs john.
My requirement is onChange of a value from the first drop down, particular values needs to load in the second drop down. Values that needs to pull are designed in XML Object as Map entries Key,Pair Values.
I already did all the things, what you have told.But,I don't know How to populate the second drop down, and where to write the condition.
If u don't mind can u send me the sample code to check the condition.

How to populate a list box linked to selection in combo box?

Hi All,
I am a beginner in Xcelsius. I am having problem on how to populate a list box based on the selection on my combo box.
I have a combo box and a list box. The combo box value consist of Countries. Values are:
Singapore
Indonesia
Thailand
When I select, for i.e. Indonesia, I want to populate the list box with all the Postal Code of Indonesia. When I select Thailand, i want to do the same.
Can anyone shed some lights on how to achieve this?
My spreadsheet data is as follow
Country         Postal Code
Singapore     680123
Singapore     680124
Singapore     680125
Indonesia     155123
Indonesia     155124
Indonesia     155125
Indonesia     155126
Thailand       333123
Many Thanks,
Harianto

Hi,
I am detailing the complete steps below:
In the combobox select the entire range of Country while seeing the records from the Combobox, Xcelsius will automatically show the unique values in the selection.
After that in the "Data Insertion" section for Combobox select the "Insertion Type" as "Filtered Rows" (please click on the question mark beside this option and it will show how the selection works).
In the source select the postal code, in the destination select the range which will be used as a data source for the list box.
This will resolve the concern. Please remember to select the question mark beside the "Insertion Type" option, it explains the working in specific details.
Best of luck.
Regards,
Gourav

How to populate "Expected (Design Steps)" in HP Quality Center Output

Similar Messages

Maybe you are looking for