How to populate SQL Text in auditing table?

Hi,
Only modifying the 'AUDIT_TRAIL' .ora parameter is enough to popoulate SQL text?
Plz reply,if you have any concerns.
Thanks,

Hi,
>>I gone through few documents to enable SQL_TEXT in audit table,it says Changing the . ora parameter to 'DB_EXTENDED' is enough to populate SQL text.
That's right. The exact SQL statement executed by the user and the bind variables used with the SQL are collected in the audit trail when the initialization parameter AUDIT_TRAIL is set to DB_EXTENDED. The DB or TRUE value will not populate the SQLTEXT and SQLBIND columns of the AUD$ table.
Cheers
Legatti

Similar Messages

How to populate multiple entries to Bapi Table

Hi all,
How to populate multiple entries to Bapi Table.....
Here is the code(in component controller)
Z_Recr_Apply_Point_Input request = new Z_Recr_Apply_Point_Input(WDModelScopeType.TASK_SCOPE);
 int size = wdContext.nodeApplicants().size();
 for(int i = 0 ; i < size ; i++)
 String isselected = wdThis.wdGetContext().nodeApplicants().getElementAt(i).getAttributeAsText("Appl_Number");
 if(isselected == "true")
 com.models.veteranpoint.Zrecr_Aplno appid = new
 com.models.veteranpoint.Zrecr_Aplno();
 appid.setAppl_Number(wdContext.nodeApplicants().
 getApplicantsElementAt(i).getAppl_Number());
 request.addApplicants(appid);
I want to pass the selected input field to bapi..
Please tel me where i pass the input field...
Please correct my code...
Thanks & regards
Mathi s

Hi,
Steps to insert multiple entries to BAPI table.
1.Create an instance for BAPI input
2.Bind the instance to the Node of the BAPI input
3.Create instance of the Structure(BAPI table) to which input has to be added.
4.Set the input values to the Structure instance.
5.Add the instance to the BAPI input.
6.Execute
From the given example,I assume Z_Recr_Apply_Point_Input is the BAPI Input and com.epiuse.us.recruitment.models.veteranpoint.Zrecr_Aplno as Structure
Step 1:
Z_Recr_Apply_Point_Input request = new Z_Recr_Apply_Point_Input(WDModelScopeType.TASK_SCOPE);
Step 2:
wdContext.nodeZ_Recr_Apply_Point_Input.bind(request);
Steps 3 & 4:
int size = wdContext.nodeApplicants().size();
for(int i = 0 ; i < size ; i++)
String isselected = wdThis.wdGetContext().nodeApplicants().getElementAt(i).getAttributeAsText("Appl_Number");
if(isselected == "true")
com.epiuse.us.recruitment.models.veteranpoint.Zrecr_Aplno appid = new
com.epiuse.us.recruitment.models.veteranpoint.Zrecr_Aplno();
appid.setAppl_Number(wdContext.nodeApplicants().
getApplicantsElementAt(i).getAppl_Number());
wdContext.currentZ_Recr_Apply_Point_InputElement().modelObject().addRecr_Aplno(appid);
Step 5:
wdContext.currentZ_Recr_Apply_Point_InputElement().modelObject().execute();
Regards,
Viji Priya

How are attribute and text master data tables linked in SAP R/3?

Hello,
how are attribute and text master data tables linked in SAP R/3?
Most tables with attribute master data like T001 for company codes,
have a text master data table T001T (add "T" to table name).
When looking at the content of table T001 via transaction se11,
the text are automatically joined.
But for some tables there is no "T"-table (e.g. table TVBUR for sales offices
has no text table TVBURT), but in se11 you get texts. There is an address
link in TVBUR, but the Name1, etc. are empty.
a) Where are the text stored?
b) How does the system know of the link?
Hope someone can help!
Best regards
Thomas

Hi Thomas
The master and text table are not linked by name, of course, if you see the text table, it has the same key fields of master table, only it has the field key spras and the field for description.
The link beetween the tables is done by foreign key: if you check the text table TVKBT u need to see how the foreign key for field VKBUR is done:
-> Foreing key with table TVBUR
-> Foreing key field type -> KEY FIELD FOR A TEXT TABLE
->Cardinality-> 1-:CN
It's very important the attribute sets for Foreing key field type, if it's KEY FIELD FOR A TEXT TABLE, it'll mean the table is a text table: i.e. that mean the master table is a check table for the text table, where the foreign key type is for text table.
U can find out the text table of master table by SE11: GoTo->Text Table
U can fined some information in table DD08L.
Max

How to populate the TEXT field in MIGO

Hi folks,
While creating material document in MIGO or MB01, i am inserting some data in TEXT ( Field in line item level ). This text data is disappearing , once mat doc is created.
how to populate the TEXT field in MIGO?Is there any cusomisation?it's urgent .
Regards
pabi

Hello Pabitra,
I had a similar issue in my Project.
Please verify if the SMOD enhancement MBCF0002 (EXIT_SAPMM07M_001) is active in your system.
If this is the case, verify from two angles:
a) Whether the Enhancement was accidentally activated - If yes, then De-activate the same
b) If there is some logic coded in the User Exit, but, the Text is somehow not determined...even the existing content in the text field (input to EXIT_SAPMM07M_001) will get vanished.
Hope that your problem will be resolved by this. Pls reward points.
With Regards
Vijay Gajavalli

Anyone know how to make vertical text in a table in keynote?

anyone know how to make vertical text in a table in keynote?

Just to add a bit more about this question. I have seen in other related questions that this feature (vertical text) is not available in (apparently) the whole iWork09. someone even said that it should be asked to the developers, so they include this feature in iWork10. I find this issue a bit sad. This feature has been present in msOffice since a while, and at least for me, this is quite important for my work. It is also apparently not possible to have different page orientation in the same document, meaning portrait and landscape, so one can have wide tables in a whole page, for example. If this is true, it is again sad, and I just cannot understand why such a basic feature is not available in an already 09 version. I am using only the trial version of iWork, but already in the first day I have discovered that I actually cannot do what I was used to. Again sadly I (and many others I guess) will have to stick to Office until the mac software is fully developed.

How to populate data in the same table based on different links/buttons

Hi
I'm using jdeveloper 11.1.4. I have a use case in which i need to populate data in the same table based on click of different links.
Can anyone please suggest how can this be achieved.
Thanks

I have a use case in which i need to populate data in the same table based on click of different linksDo you mean that you need to edit existing rows ?
What format do you have the date in - table / form ?

How can i Change Text Color in table

How can i change the text color i table, the true becoming GREEN, and the text in Fals becoming RED.
Someone can help me to resolve this problem with a sample, because when i run the program all text becoming green in (TRUE) and than when i chang it to the (fals) all becoming Red.
Attachments:
Color.vi ‏38 KB

Modifying the properties of a control in a subVI do not modify the properties of a different control in the main VI. The data is the only thing passed back from the subVI. To modify the properties of the table in the main, you need to pass a reference to it to the subVI and modify it's properties. I've attached a modified llb that does what you want.
Attachments:
Main_color_Table_mod.llb ‏41 KB

How to populate List Item from the table in a form builder

I want to know how to populate the List Item (pop up menu and combo box) from a table.
Supposing I have a table Customer(cust_id,cust_name)
and now I want to populate it in such a manner that I can update the data back to the database and also access the list on the form.

This is the method i am using to populate a list.
1- First of all you need to create a non-database list item for customer_name.
2-create this procedure
PROCEDURE populate_list_with_query
--Populates the given list item with the specified query.
(p_list_item in VARCHAR2
,p_query in VARCHAR2)
IS
/* Name the record group after the list item (no
block prefix). */
cst_rg_name constant VARCHAR2(30) :=
GET_ITEM_PROPERTY(p_list_item,item_name);
v_rg_id RECORDGROUP;
BEGIN
v_rg_id := FIND_GROUP(cst_rg_name);
IF ID_NULL(v_rg_id) THEN
v_rg_id := CREATE_GROUP_FROM_QUERY(cst_rg_name,p_query);
END IF;
IF POPULATE_GROUP(v_rg_id) = 0 THEN
POPULATE_LIST(p_list_item,v_rg_id);
/* Force display of first list element label
in the list item. */
COPY(GET_LIST_ELEMENT_VALUE(p_list_item,1),p_list_item);
END IF;
END populate_list_with_query;
3- Create When-Create-Record on the block level and write this code
BEGIN
POPULATE_LIST_WITH_QUERY('bk1.customer_name',
'SELECT customer_name, to_char(customer_id) FROM customer');
END;
In this example, the customer name is the (visible) list label and the customer ID is the (actual) list value
i hope this will solve your problem ...

How to populate multiple text boxes by selecting a value from drop down

I apologize in advance if this is redundant, but I have searched this forum relentlessly to no avail. I have a form connected to an MS Access database. The database is linked to another datadase on an Advantage server. This is dynamic data that has an ODBC driver allowing to link access tables to the Advantage data. Macros on access updates the table being used on this form. The livecycle form connects to the access data via a DSN on a machine that uses acrobat (not reader). This is a physician office, this form should expedite ordering radiology tests on patients. The plan is to use a drop down to select a chart number that will trigger several text boxes to populate dynamically with the corresponding demographic values like name, age, insurance etc.
Using a data drop down I am able to select the chart number. When I used the example from the office supplies database, so that a button will trigger the event with the following code:
if (Len(Ltrim(Rtrim(SelectField.rawValue))) > 0) then
$sourceSet.DataConnection.#command.query.commandType = "text"
$sourceSet.DataConnection.#command.query.select.nodes.
item(0).value = Concat("Select * from OfficeSupplies Where ID = ", Ltrim(Rtrim(SelectField.rawValue)) ,"")
I recieve a syntax error, despite adjusting quotation since I am using text rather than numeric fields.
My question is the following:
Is there a simple javascript that I can use to populate these text boxes (which may be read only but would be better if it allows user input)? Or does anyone recommend an alternative method? I would be happy with a link that solves this problem if someone can provide. I am somewhat familiar with js but open to any suggesstion.
Thanks
PS this form could also be linked to a Sequel database if that offers an advantage.

The View object API has a setQurery() method that you can use to set the query as needed before executing it via executeQuery(). You can do this in a custom Application Module method exposed to its client interface and bound to the binding layer. You can call this method from your backing bean on a value change listener.

How to populate a text variable

Hi All,
I need to populate a text variable based on the value of a characteristic in the query. Since the value of the characteristic and the text variable value is not the same I cannot use replacement path. So here I have to use customer exit.
My problem is how to get the value of the characteristic in the customer exit.
If the characteristic is used in a variable I know how to get the value of the characteristic (We can get it from i_t_var_range). But here I am not using the characteristic in any variable. So how will I get the characteristic value in the customer exit.
Any useful help will be appreciated.
Thanks
Anand

Hi Srini,
Based on my above scenario suppose that there are only two month values in the cube, say January and March. So in the column side there will be only two column for each key figure, if only month characteristic is there in the column side, one for January and the second for March. Here I want to populate "First" as value for text variable where January is there and "Third" as value of text variable where March is there.
Here you have mentioned "you can read all available values in cube and pass required value/text to text variables". Here how do I write a code to read the month values from the cube, that is my question.
If it is there in some variable I could have got it from "i_t_var_range". But as per user requirement I cannot use a variable restriction on the month and they want to use this text variable across the queries(which I am not creating, user themselves are creating the queries) based on their requirement.
Thanks,
Anand

How to change heder text font of table

Hi
i want to change font and color of header text of the table can you please tell how to do it.
Thanks
Rahul

Hi Rahul,
There is no such option available.
But you can use images as a workaround.
create the image of your header texts and use them as a Header.
it will surely help you.
regards
Narendra Singh

Sql text from statspack tables

Hi,
How can I get sql information from statspack tables stats$sql_text, stats$sql_summarry..?
I tried writting sql but not able to get the proper results, please help.
select b.hash_value hash_value, a.snap_time snap_time, b.module module, b.fetches fetches, b.executions executions,
b.rows_processed rows_processed, b.cpu_time cpu_time, b.elapsed_time elapsed_time from stats$snapshot a,stats$sql_summary b
where a.snap_id=b.snap_id and b.snap_id between 1 and 13
and I need to get the complete stats$sql_text.sql_text in the same query without using any procedure or function..
version is 9.2.0.8.
Thanks
clin

I'd also do this the way MOD says.
But if you are feeling adventurous, you could explore cascading delete. You can specify a primary key with "on delete cascade", which makes referred-to records automatically delete. Google for oracle delete cascade or search your Oracle docs.
I wouldn't do cascading deletes myself, though. For one, I've ran into enough trouble with many "smart" db features when trying to do db administration.

How to extract sql text with SID and SERIAL#

Hi,
I am new to oracle database and recently i have started my journey in performance tuning.
i need to extract sql text which is fired by user based ont SID and SERIAL#.
Thanks in advance..
prabha

seankim wrote:
Hi~
select a.sid, a.serial#, b.sql_fulltext
from v$session a, v$sql b
where decode(a.sql_id,null,a.prev_sql_id, a.sql_id)=b.sql_id
and decode(a.sql_id,null,a.prev_child_number, a.sql_child_number)=b.child_number
and a.sid=&sid
and a.serial#=&serial;
Also a bad idea - have you checked the exection plan ?
Do you think it might be a good idea to think about the need for statistics on fixed objects ?
Here's a possible plan from 11.1.0.7 - and it's not very nice.
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 2182 | 0 (0)| 00:00:01 |
| 1 | NESTED LOOPS | | 1 | 2182 | 0 (0)| 00:00:01 |
| 2 | MERGE JOIN CARTESIAN | | 1 | 2075 | 0 (0)| 00:00:01 |
| 3 | NESTED LOOPS | | 1 | 39 | 0 (0)| 00:00:01 |
|* 4 | FIXED TABLE FIXED INDEX| X$KSLWT (ind:1) | 1 | 26 | 0 (0)| 00:00:01 |
|* 5 | FIXED TABLE FIXED INDEX| X$KSLED (ind:2) | 1 | 13 | 0 (0)| 00:00:01 |
| 6 | BUFFER SORT | | 1 | 2036 | 0 (0)| 00:00:01 |
|* 7 | FIXED TABLE FULL | X$KGLCURSOR_CHILD | 1 | 2036 | 0 (0)| 00:00:01 |
|* 8 | FIXED TABLE FIXED INDEX | X$KSUSE (ind:1) | 1 | 107 | 0 (0)| 00:00:01 |
Predicate Information (identified by operation id):
 4 - filter("W"."KSLWTSID"=82)
 5 - filter("W"."KSLWTEVT"="E"."INDX")
 7 - filter("INST_ID"=USERENV('INSTANCE'))
 8 - filter("S"."INDX"=82 AND "S"."KSUSESER"=53 AND "S"."INST_ID"=USERENV('INSTANCE')
 AND BITAND("S"."KSSPAFLG",1)<>0 AND BITAND("S"."KSUSEFLG",1)<>0 AND
 "KGLOBT03"=DECODE("S"."KSUSESQI",NULL,"S"."KSUSEPSI","S"."KSUSESQI") AND
 "KGLOBT09"=DECODE("S"."KSUSESQI",NULL,DECODE("S"."KSUSEPCH",65535,TO_NUMBER(NULL),"S"."K
 SUSEPCH"),DECODE("S"."KSUSESCH",65535,TO_NUMBER(NULL),"S"."KSUSESCH")))You need to avoid the "full tablescan" of the library cache.
Regards
Jonathan Lewis
http://jonathanlewis.wordpress.com

How to Populate local variable values to tables like likp .

Hi..I have taken 3 local variables date1 date2 and date3 .How to populate them in table (likp-lfdat).In date1 i have dates of lfdat between 14/05 to 21/05 and date2 from 22/05 to 28/05 and date3 one more week.In o/p how can see data between these dates range only?

Use Where clause as:
WHERE
LFDAT IN DATE1
OR LFDAT IN DATE2
OR LFDAT IN DATE3.
Regards,
Anil

How to pass the text from a table to the field label on the selection scre

hi guru's
i have requirement were in i have to pass the text from a table as field label for
   a input field on the selection screen.
EX:    selection screen
            (xxxxxxx ) __________
            field label
please help
regards,
vara

hi all,
can you please check the code, and suggest am i doing wrong any were.
types: xtab(200).
data : ttab type table of xtab,
w_so type xtab.
data: routine(32) value 'TEMP_ROUTINE',
program(8),
message(128),
line type i.
AT SELECTION-SCREEN OUTPUT.
select field text DATA_ELEMENT from zauthgrptxt into table t_fieldlabel where STARALLOWED EQ c_asteriks.
DESCRIBE TABLE t_fieldlabel LINES N.
w_so = 'REPORT ZTEMP_PROGRAM.'.
append w_so to ttab.
w_so = 'FORM TEMP_ROUTINE.'.
append w_so to ttab.
loop at t_fieldlabel.
w_field = t_fieldlabel-field.
CONCATENATE 'SELECT-OPTIONS: ' ' P_' w_field zspace ' FOR ' ' T_FIELDLABEL-' w_field ' NO INTERVALS NO-EXTENTION.' INTO w_so.
append w_so to ttab.
endloop.
w_so = 'ENDFORM.'.
append w_so to ttab.
generate subroutine pool ttab name program
message message
line line.
if sy-subrc = 0.
perform (routine) in program (program).
else.
write:/ Message.
endif.
The sy-subrc = 4. nothing is coming into 'program' at generate subroutine pool
very urgent requirement please help
thanks,
vara

How to populate SQL Text in auditing table?

Similar Messages

Maybe you are looking for