How to populate the application server data on screen
Hi..
In my present requirement...
I need to give the vehicle no field on my custom screen...then i will press the capture weight button....
then it needs to fetch the weight from app server file (columns in file...1.date 2.time 3.weight...4.key.)and need to populate on my screen...
Could anybody suggest me the solution for this...
hi,
Move the file data internal table. at runtime capture the required data from this internal table for the given vehicle reg.number and u can display the same data one the screen.
regards,
Raghu
Similar Messages
-
How to give the application server file path in the module pool programming
Hi,
Could somebody help me how to provide the application server file path in module pool programming once the logo is uploaded to sap system.
For eg I have imported a logo name owens into sap system by using transaction se78; now I need to call the path in the below url,
if container2 is initial.
CREATE OBJECT CONTAINER2
EXPORTING
CONTAINER_NAME = 'PICTURE_CONTAINER2'.
CREATE OBJECT PICTURE2
EXPORTING
PARENT = CONTAINER2.
CALL METHOD PICTURE2->SET_DISPLAY_MODE
EXPORTING
DISPLAY_MODE = CL_GUI_PICTURE=>display_mode_fit_center
EXCEPTIONS
ERROR = 1.
CALL METHOD PICTURE2->LOAD_PICTURE_FROM_URL
EXPORTING
URL = " ? "
EXCEPTIONS
ERROR = 1
Others = 2.
endif.
Thanks in advance
Deepuhi Deepu,
Use FM '/SAPDMC/LSM_F4_FRONTEND_FILE' for fetching the data from the application server path/presentation server path
Regards,
Santosh -
I had a trouble with my lap top and had to format hard disk and install all soft ware again. could any body tell me how to transfer the application and data in my i phone back to itune.
You can't. It still thinks that your iPhone is synced with another iTunes library (the one that you had before you reformatted the hard drive.
-
How to change the application server paramters in 9ias
I want to change the change the heap size that JVM can use at runtime instead of changing it manually. The paramters are Command Line Options, for OC4j(Multiple VM configuration), the parameter is -Xmx in Java Options.
So I wanted to know if it is possible to change these Command Line Options at run time through Java code inside the application.Hi,
I think you didn't get what I intended to say. you said "what i find is :Problem:
RZ21->Technical Infrastructure->Availability Monitoring->CCMSPING instance for XB1 -Under Monitored systems".
Now, find your saplogon.ini file . It should have the correct information about your system with the application server. Try 'Load System' from your saplogon.ini file. You should be able to the correct information then.
Hope it will help you.
Rajeev -
How to populate the webservice XML data in to Table ODI- Webserice invoke
Hi,
I have multiple work orders in my oracle db table, That means multiple WorkOrder_Item_ID's are there in my source table. When I start transfer the data from source to Target using ODI , I need to get the information of multiple Work order Item_IDs from the Webservice response data ( XML data) of another system by calling ODI Webservice Invoke in ODI and insert the same Webservice XML response data in my source table in the corresponding Item_ID's.
My First question : How can I take the data from Webservice XML and put in to correspoding Item relevent data in to Source Table
Second question: How can I send the multiple work order item ID at the same time to the Webservice and insert the relevant item data in to Source table using ODI.
Finally this combined soure table data should be moved to Target table in ODI.. That I know.. How to do it.
Can any one please give answers for the above said two questions.
Thanks,
Rajesh
Edited by: user11226287 on Oct 30, 2009 4:40 AM
Edited by: user11226287 on Nov 1, 2009 10:44 PM
Edited by: user11226287 on Nov 1, 2009 10:59 PMI find some words in the implementation guide, it says:"To collect data from your non-Oracle ERP systems or your trading partners' systems,you model each non-Oracle ERP system or trading partner as an Oracle Applications organization and store their setup and transaction data there".
But I can't find where to model the application organization for the legacy system.
anyone can give some clues? Thanks in advance. -
How can deploy the application and data to client?
As I know, I can burn a CD with http://mobileserver/setup/webtogo/setup.exe and distribute this CD to client to install web-to-go Client.
But how can I create a package for client to install my application and data?
What tools should I use? Where can I get the information?
Can you give/show me a simple example to make a package and install the package?
Thanks a lot.Only the carrier to whom the device is locked can unlock it.
StraightTalk is not a supported carrier... not all features may work. -
How to populate the calculated value into screen field.
I am doing one enhancement in QM.I have added one custom screen to notification transaction ( QM01/QM02/QM03) transaction tab strip control using the enhancement QQMA0001.The Details of the calling and called screens as shown bellow
The Calling screen: SAPLIQS0
Screen Number: 7790
Screen Area :USER0001
Called Screen: SAPLXQQM
Screen Number: 0101
I have developed the Custom Screen in screen 0101 and called in PBO of program SAPLIQS0 7790 screen.
The Screen in calling perfectly .The Custom screen having different fields like Raw cost, Intermediate cost, Finished cost, SCAR Cost and Sales Order Cost Etc... These fields are out put filed types. No input for these screens.. I have few doubts regarding this
How to populate the calculated values in Custom screen?
Where we wrote the code to populate the calculated values in custom screen?
You have any idea please guide me
Thanks & Regards,
SamantulaAs your screen fields should be global variables in SAPLXQQM, you may initialize them by implementing function module EXIT_SAPMIWO0_008 which also belongs to SAPLXQQM (Customer Exit: Transfer Notification Data to User Screen)
-
How to load data from a flat file which is there in the application server
HI All,
how to load data from a flat file which is there in the application server..Hi,
Firstly you will need to place the file(s) in the AL11 path. Then in your infopackage in "Extraction" tab you need to select "Application Server" option. Then you need to specify the path as well as the exact file you want to load by using the browsing button.
If your file name keeps changing on a daily basis i.e. name_ddmmyyyy.csv, then in the Extraction tab you have the option to write an ABAP routine that generates the file name. Here you will need to append sy-datum to "name" and then append ".csv" to generate complete filename.
Please let me know if this is helpful or if you need any more inputs.
Thanks & Regards,
Nishant Tatkar. -
How to send the report output to the application server in a excel file
Hello,
how to send the report output to the application server in a excel file.
and the report runs in background.
Thanks in advance.
SundeepDear Sundeep.
I'm providing you with the following piece of code ... Its working fine for me ... hopefully it suits your requirement ...
D A T A D E C L A R A T I O N *
TYPES: BEGIN OF TY_EXCEL,
CELL_01(80) TYPE C,
CELL_02(80) TYPE C,
CELL_03(80) TYPE C,
CELL_04(80) TYPE C,
CELL_05(80) TYPE C,
CELL_06(80) TYPE C,
CELL_07(80) TYPE C,
CELL_08(80) TYPE C,
CELL_09(80) TYPE C,
CELL_10(80) TYPE C,
END OF TY_EXCEL.
DATA: IT_EXCEL TYPE STANDARD TABLE OF TY_EXCEL,
WA_EXCEL TYPE TY_EXCEL..
E V E N T : S T A R T - O F - S E L E C T I O N *
START-OF-SELECTION.
Here you populate the Internal Table.
Display - Top of the Page.
PERFORM DISPLAY_TOP_OF_PAGE.
E V E N T : E N D - O F - S E L E C T I O N *
END-OF-SELECTION.
SET PF-STATUS 'GUI_STATUS'.
E V E N T : A T U S E R - C O M M AN D *
AT USER-COMMAND.
CASE SY-UCOMM.
WHEN 'EXPORT'.
Exporting the report data to Excel.
PERFORM EXPORT_TO_EXCEL.
ENDCASE.
*& Form DISPLAY_TOP_OF_PAGE
text
--> p1 text
<-- p2 text
FORM DISPLAY_TOP_OF_PAGE .
SKIP.
WRITE: /05(128) SY-ULINE,
/05 SY-VLINE,
06(127) 'O R I C A'
CENTERED COLOR 1,
132 SY-VLINE.
WRITE: /05(128) SY-ULINE,
/05 SY-VLINE,
06(127) 'Shift Asset Depreciation - Period/Year-wise Report.'
CENTERED COLOR 4 INTENSIFIED OFF,
132 SY-VLINE.
WRITE: /05(128) SY-ULINE.
E X C E L O P E R A T I O N
CLEAR: IT_EXCEL[],
WA_EXCEL.
PERFORM APPEND_BLANK_LINE USING 1.
WA_EXCEL-cell_02 = ' XYZ Ltd. '.
APPEND WA_EXCEL TO IT_EXCEL.
CLEAR: WA_EXCEL.
WA_EXCEL-cell_02 = 'Shift Asset Depreciation - Period/Year-wise Report.'.
APPEND WA_EXCEL TO IT_EXCEL.
PERFORM APPEND_BLANK_LINE USING 1.
ENDFORM. " DISPLAY_TOP_OF_PAGE
*& Form APPEND_BLANK_LINE
text
-->P_1 text
FORM APPEND_BLANK_LINE USING P_LINE TYPE I.
DO P_LINE TIMES.
CLEAR: WA_EXCEL.
APPEND WA_EXCEL TO IT_EXCEL.
enddo.
ENDFORM.
*& Form EXPORT_TO_EXCEL
text
--> p1 text
<-- p2 text
FORM EXPORT_TO_EXCEL .
DATA: L_FILE_NAME(60) TYPE C.
Create a file name
CONCATENATE 'C:\' 'Shift_Depn_' SY-DATUM6(2) '.' SY-DATUM4(2)
'.' SY-DATUM+0(4) INTO L_FILE_NAME.
Pass the internal table (it_excel which is already populated )
to the function module for excel download.
CALL FUNCTION 'WS_EXCEL'
exporting
filename = L_FILE_NAME
tables
data = IT_EXCEL
exceptions
unknown_error = 1
others = 2.
if sy-subrc <> 0.
message e001(ymm) with 'Error in exporting to Excel.'.
endif.
ENDFORM. " EXPORT_TO_EXCEL
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
When you click the button - Export to Excel ( GUI-Status) you'll be able to export the content of the Internal Table to an Excel file .......
Regards,
Abir
Don't forget to award Points * -
How to delete File from the Application Server,ABAP
Hi Gurus,
I'm using DELETE DATASET Statement ,
Based on Date how can i delete files with in the period in the Application server
Any BAPI/FM for this Delete file based on some Date Period
Thanks in Advance.DATA: BEGIN OF file,
dirname(75) TYPE c, " name of directory. (possibly truncated.)
name(75) TYPE c, " name of entry. (possibly truncated.)
type(10) TYPE c, " type of entry.
len(8) TYPE p, " length in bytes.
owner(8) TYPE c, " owner of the entry.
mtime(6) TYPE p, " last modification date, seconds since 1970
mode(9) TYPE c, " like "rwx-r-x--x": protection mode.
useable(1) TYPE c,
subrc(4) TYPE c,
errno(3) TYPE c,
errmsg(40) TYPE c,
mod_date TYPE d,
mod_time(8) TYPE c, " hh:mm:ss
seen(1) TYPE c,
changed(1) TYPE c,
END OF file.
DATA: BEGIN OF file_list OCCURS 100,
dirname(75) TYPE c, " name of directory. (possibly truncated.)
name(75) TYPE c, " name of entry. (possibly truncated.)
type(10) TYPE c, " type of entry.
len(8) TYPE p, " length in bytes.
owner(8) TYPE c, " owner of the entry.
mtime(6) TYPE p, " last modification date, seconds since 1970
mode(9) TYPE c, " like "rwx-r-x--x": protection mode.
useable(1) TYPE c,
subrc(4) TYPE c,
errno(3) TYPE c,
errmsg(40) TYPE c,
mod_date TYPE d,
mod_time(8) TYPE c, " hh:mm:ss
seen(1) TYPE c,
changed(1) TYPE c,
END OF file_list.
DO.
CLEAR file.
CALL 'C_DIR_READ_NEXT'
ID 'TYPE' FIELD file-type
ID 'NAME' FIELD file-name
ID 'LEN' FIELD file-len
ID 'OWNER' FIELD file-owner
ID 'MTIME' FIELD file-mtime
ID 'MODE' FIELD file-mode
ID 'ERRNO' FIELD file-errno
ID 'ERRMSG' FIELD file-errmsg.
if sy-subrc eq 0.
MOVE-CORRESPONDING file TO file_list.
APPEND file_list.
else.
exit.
endif.
enddo.
sort file_list based on date and time ie, MOD_DATE and MOD_TIME fields
and delete the entries -
Regarding reading data from a file in the application server.
Hello Everyone,
My question is:
The file in the application server consists of data with header, detail and trail out of which the detail contains the main information. The detail again contains the data in the form of a continuous string and again some spaces corresponding to a single record. I need to split the data in the internal table in such a way so that the first few characters get into field-1 of the target internal table. Again I need to consider the spaces for accessing the data for filling up in field-2. How do I decide on the 'Split' statement and specially when the whole string has to be taken care of as contatining data in a single string format without space and again some data after some spaces corresponding to a single record.
Your help is very much needed. Thanks to all the experts in advance.Hi
This is the sample code I was used for the similar requirement.
DATA: single_line TYPE string .
v_file_listings = pa_filn1.
IF v_file_listings IS INITIAL .
MESSAGE e039 WITH v_file_listings.
ENDIF.
*-- read file, split lines into fields and put data into table
OPEN DATASET v_file_listings FOR INPUT IN TEXT MODE ENCODING NON-UNICODE. "Opening the files
IF sy-subrc EQ 0.
DO.
READ DATASET v_file_listings INTO single_line. "Reading the content of file into line
IF sy-subrc = 0.
IF sy-index > 1. "skip header-line
SPLIT "Split the content of line into work area
single_line
AT k_split
INTO
wa_listings-kschl " Condition type
wa_listings-tabname16 " Condition table name
wa_listings-vkorg " Sales organisation
wa_listings-kunnr " sold-to party numberor ship-to party number
wa_listings-matnr " Material Number
wa_listings-kodatab " Valid-from date
wa_listings-kodatb1. " Valid-to date
APPEND wa_listings TO itab_listings. "Appending Work Area to internal table
ENDIF.
ELSE.
EXIT.
ENDIF.
v_count1 = sy-tabix.
ENDDO.
Regards,
Sreeram -
ABAP Code for Backup the entire table data in the application server
Hello Friends,
I have to create the table data Backup and Store the entire table data in the application server and also be able to restore the data back if needed.
this should be dynamic program for any table based on the table name given on the application server.. I have developed a program for this but its having problems with the Quantity, amount. Its not writing it correctly at the application level.
ANy Suggestions on this.
Below is the program for this.
Thanks,
Ster.
* Report YWMM_TABLE_DUMP *
REPORT ywmm_table_dump .
TABLES :
dd03l.
* Type spool declaration
TYPE-POOLS:
abap, slis.
DATA: i_table_data1 TYPE REF TO data.
DATA : it_dd03l LIKE dd03l OCCURS 0 WITH HEADER LINE.
*DATA : gt_fieldcat TYPE lvc_s_fcat.
DATA : i_fcat TYPE STANDARD TABLE OF lvc_s_fcat,
l_dr_line TYPE REF TO data,
l_v_as4vers TYPE as4vers.
FIELD-SYMBOLS: <f_table_data1> TYPE STANDARD TABLE,
<f_wa_table_data1> TYPE ANY.
SELECTION-SCREEN: BEGIN OF BLOCK bl1 WITH FRAME TITLE text-001.
PARAMETERS: rb_copy RADIOBUTTON GROUP map DEFAULT 'X',
rb_rest RADIOBUTTON GROUP map.
SELECTION-SCREEN: END OF BLOCK bl1.
SELECTION-SCREEN: BEGIN OF BLOCK bl2 WITH FRAME TITLE text-002.
PARAMETERS: p_table TYPE tabname OBLIGATORY,
p_plfld TYPE dd03l-fieldname.
SELECTION-SCREEN SKIP 1.
PARAMETERS: p_bkfile TYPE localfile OBLIGATORY.
SELECTION-SCREEN: END OF BLOCK bl2.
PERFORM get_data.
IF rb_copy = 'X'.
PERFORM backup.
ELSEIF rb_rest = 'X'.
PERFORM database_update.
ENDIF.
*& Form get_data
FORM get_data.
CLEAR i_fcat.
REFRESH i_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = p_table " Table Name
CHANGING
ct_fieldcat = i_fcat
EXCEPTIONS
OTHERS = 1.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = i_fcat
IMPORTING
ep_table = i_table_data1.
IF sy-subrc = 0.
ASSIGN i_table_data1->* TO <f_table_data1>.
ELSE.
WRITE: 'Error creating internal table'.
ENDIF.
IF rb_copy = 'X'.
SELECT * FROM (p_table) INTO CORRESPONDING FIELDS OF
TABLE <f_table_data1> UP TO 20 ROWS.
ELSEIF rb_rest = 'X'.
CREATE DATA l_dr_line LIKE LINE OF <f_table_data1>.
ASSIGN l_dr_line->* TO <f_wa_table_data1>.
*Get Data from Application Server
* Opening the dataset P_BKFILE given in the selection screen
TRANSLATE p_bkfile TO LOWER CASE.
OPEN DATASET p_bkfile FOR INPUT IN TEXT MODE." ENCODING DEFAULT.
IF sy-subrc NE 0.
* MESSAGE:
ELSE.
DO.
* Reading the file from application server
READ DATASET p_bkfile INTO <f_wa_table_data1>.
IF sy-subrc = 0.
APPEND <f_wa_table_data1> TO <f_table_data1>.
ELSE.
EXIT.
ENDIF.
ENDDO.
* Closing the dataset
CLOSE DATASET p_bkfile.
ENDIF.
ENDIF.
ENDFORM. " get_data
*& Form backup
* text
* --> p1 text
* <-- p2 text
FORM backup.
TRANSLATE p_bkfile TO LOWER CASE.
OPEN DATASET p_bkfile FOR OUTPUT IN TEXT MODE.
IF sy-subrc NE 0.
WRITE: text-017.
STOP.
ELSE.
LOOP AT <f_table_data1> ASSIGNING <f_wa_table_data1>.
TRANSFER <f_wa_table_data1> TO p_bkfile.
ENDLOOP.
ENDIF.
CLOSE DATASET p_bkfile.
ENDFORM. " backup
*& Form database_update
FORM database_update.
DATA : i_mara_u TYPE STANDARD TABLE OF mara WITH HEADER LINE,
i_ekpo_u TYPE STANDARD TABLE OF ekpo WITH HEADER LINE,
i_eban_u TYPE STANDARD TABLE OF eban WITH HEADER LINE,
i_resb_u TYPE STANDARD TABLE OF resb WITH HEADER LINE,
i_plpo_u TYPE STANDARD TABLE OF plpo WITH HEADER LINE,
i_stpo_u TYPE STANDARD TABLE OF stpo WITH HEADER LINE,
i_vbap_u TYPE STANDARD TABLE OF vbap WITH HEADER LINE,
i_vbrp_u TYPE STANDARD TABLE OF vbrp WITH HEADER LINE,
i_lips_u TYPE STANDARD TABLE OF lips WITH HEADER LINE,
i_afvc_u TYPE STANDARD TABLE OF afvc WITH HEADER LINE,
i_asmd_u TYPE STANDARD TABLE OF asmd WITH HEADER LINE,
* i_cooi_u TYPE STANDARD TABLE OF cooi WITH HEADER LINE,
i_qmel_u TYPE STANDARD TABLE OF qmel WITH HEADER LINE,
i_cooi_u TYPE STANDARD TABLE OF cooi WITH HEADER LINE,
i_esll_u TYPE STANDARD TABLE OF esll WITH HEADER LINE,
i_t165_u TYPE STANDARD TABLE OF t165 WITH HEADER LINE,
i_t165e_u TYPE STANDARD TABLE OF t165e WITH HEADER LINE,
i_twpko_u TYPE STANDARD TABLE OF twpko WITH HEADER LINE,
i_tpext_u TYPE STANDARD TABLE OF tpext WITH HEADER LINE,
i_ce4mxpa_u TYPE STANDARD TABLE OF ce4mxpa WITH HEADER LINE,
i_ce4mxpa_acct_u TYPE STANDARD TABLE OF ce4mxpa_acct WITH
HEADER LINE,
i_zaim_u TYPE STANDARD TABLE OF zaim WITH HEADER LINE,
i_s012_d TYPE STANDARD TABLE OF s012 WITH HEADER LINE,
i_s012_i TYPE STANDARD TABLE OF s012 WITH HEADER LINE,
i_dummy TYPE STANDARD TABLE OF mara.
CASE p_table.
WHEN 'MARA'.
* Non-Key
PERFORM move_to_table USING <f_table_data1>
CHANGING i_mara_u[]
i_mara_u.
PERFORM update_table USING i_mara_u[].
ENDCASE.
ENDFORM. " database_update
*& Form move_to_mara
FORM move_to_table USING p_tab_from TYPE STANDARD TABLE
CHANGING p_tab_to TYPE STANDARD TABLE
p_w_table.
DATA: l_wa_fcat TYPE lvc_s_fcat.
FIELD-SYMBOLS: <f_field_from> TYPE ANY,
<f_field_to> TYPE ANY.
LOOP AT p_tab_from ASSIGNING <f_wa_table_data1>.
LOOP AT i_fcat INTO l_wa_fcat.
ASSIGN COMPONENT l_wa_fcat-fieldname
OF STRUCTURE <f_wa_table_data1> TO <f_field_from>.
ASSIGN COMPONENT l_wa_fcat-fieldname
OF STRUCTURE p_w_table TO <f_field_to>.
<f_field_to> = <f_field_from>.
ENDLOOP.
APPEND p_w_table TO p_tab_to.
ENDLOOP.
ENDFORM. " move_to_mara
*& Form update_table
FORM update_table USING p_table_update TYPE STANDARD TABLE.
SELECT SINGLE *
FROM dd03l
WHERE fieldname = p_plfld
AND tabname = p_table
AND keyflag <> 'X'
AND as4local = 'A'
AND as4vers = l_v_as4vers
AND ( comptype = 'E' OR comptype = space ).
IF sy-subrc = 0.
* Do update
IF NOT p_table_update IS INITIAL.
UPDATE (p_table) FROM TABLE p_table_update.
IF sy-subrc = 0.
COMMIT WORK.
ELSE.
ROLLBACK WORK.
WRITE: text-003.
STOP.
ENDIF.
ENDIF.
ELSE.
*delete and insert.
IF NOT p_table_update IS INITIAL.
* DELETE (p_table).
IF sy-subrc = 0.
INSERT (p_table) FROM TABLE p_table_update.
IF sy-subrc = 0.
COMMIT WORK.
ELSE.
ROLLBACK WORK.
WRITE: text-018.
STOP.
ENDIF.
ELSE.
ROLLBACK WORK.
WRITE: text-018.
STOP.
ENDIF.
ENDIF.
ENDIF.
ENDFORM. " update_table
Edited by: Julius Bussche on Jul 18, 2008 1:43 PM
Please use a meaningfull subject title!ARS,
I am struggling a bit to get this.
there is a syntax error,
Field "FIELDS_INT-TYPE" is unknown. It is neither in one of thespecified tables nor defined by a "DATA" statement.
Again you have asked to move to a diffrent table. What is that table and how to build it.
LOOP AT <f_table_data1> ASSIGNING <f_wa_table_data1>.
LOOP AT i_fcat INTO l_fcat.
IF l_fcat-inttype EQ 'P'.
ASSIGN COMPONENT l_fcat-fieldname
OF STRUCTURE <f_wa_table_data1> TO <f_field>
TYPE fields_int-type
DECIMALS fields_int-decimals.
ELSE.
ASSIGN COMPONENT l_fcat-fieldname
OF STRUCTURE <f_wa_table_data1> TO <f_field>
TYPE fields_int-type.
ENDIF.
" Move <f_field> to a new table and use this table for download
ENDLOOP.
TRANSFER <f_wa_table_data1> TO p_bkfile.
ENDLOOP.
Ster -
How to display application server date and time?
Hi Friends,
I am getting error when i am trying to display default date,time and client.
I have designed a screen where DATE, TIME and CLIENT are 3 fields in the screen this 3 fields i have to display defaultly date,time and client of the application server.
In the data declarations i have declared like...
DATA: DATE LIKE SY-DATUM,
TIME LIKE SY-UZEIT,
CLIENT LIKE SY-MANDT.
In the PBO screen source code i am writeing like...
write: 'DATE', SY-DATUM, / 'TIME', SY-UZEIT, / 'CLIENT', SY-MANDT.
But i am not able to display the output please can anyone point my mistake where i am going useful will be rewarded.
ThksHi Reddy,
I will tell u how to get this done .
Check all these screen shots .No work at all .
[Screen shot 1|http://bp3.blogger.com/_O5f8iAlgdNQ/R-icwCm1qvI/AAAAAAAAA9k/7gshn3AKOZ0/s1600-h/date1-715845.jpg]
[Screen shot 2.|http://bp1.blogger.com/_O5f8iAlgdNQ/R-icwim1qwI/AAAAAAAAA9s/QMtdiWyB-nY/s1600-h/date2-718517.jpg]
[Screen shot 3|http://bp2.blogger.com/_O5f8iAlgdNQ/R-icwym1qxI/AAAAAAAAA90/4GnH-bwAPEo/s1600-h/date3-719013.jpg]
There is no work at all . only onething what u have to do is, give field length 8 on the screen for Time field. thats it .
Regards,
Venkat.O -
How to check whether the Application Server directory exits or not
Hi,
I have a selection screen in which I give the Application server file name(UNIX file) as input. Here, I would like to check whether the Server directory exists or not.
Let us say, the path I gave in the selection screen is /usr/sap/tmp/testfile.txt . Here, the file name is testfile.txt and the server directory is /usr/sap/tmp . I would like to check whether this directory /usr/sap/tmp exists in the server or not. I am not bothered about the file name as I am going to write data into the file. I am mainly concerned about whether the directory exists in the server or not. and one more thing... this is the Application Server path not the Local path.
Can anyone help me on the same how to check whether the server directory exists or not.
Thanks in advance.
Best Regards,
Pradeep.Also you can use the FM EPS_GET_DIRECTORY_LISTING for this purpose.
Store the directory name
l_dpath = p_file+0(l_no).
Validate the directory of the application server
CALL FUNCTION 'EPS_GET_DIRECTORY_LISTING'
EXPORTING
dir_name = l_dpath
TABLES
dir_list = l_i_dlist
EXCEPTIONS
invalid_eps_subdir = 1
sapgparam_failed = 2
build_directory_failed = 3
no_authorization = 4
read_directory_failed = 5
too_many_read_errors = 6
empty_directory_list = 7
OTHERS = 8.
If any problem occurs with the directory then display proper
error message
IF sy-subrc <> 0.
Display error message
MESSAGE e018 WITH 'Problem with directory entered'(008).
ENDIF. " sy-subrc <> 0
Regards,
Joy. -
How to send the file contents in the application server to ftp server
Hi,
how to send the file contents in the application server to ftp server.
regards,
sreeTest SAP FTP functions
DATA: BEGIN OF MTAB_DATA OCCURS 0,
LINE(132) TYPE C,
END OF MTAB_DATA.
DATA: MC_PASSWORD(20) TYPE C,
MI_KEY TYPE I VALUE 26101957,
MI_PWD_LEN TYPE I,
MI_HANDLE TYPE I.
START-OF-SELECTION.
MC_PASSWORD = 'password'.
DESCRIBE FIELD MC_PASSWORD LENGTH MI_PWD_LEN.
*-- FTP_CONNECT requires an encrypted password to work
CALL 'AB_RFC_X_SCRAMBLE_STRING'
ID 'SOURCE' FIELD MC_PASSWORD ID 'KEY' FIELD MI_KEY
ID 'SCR' FIELD 'X' ID 'DESTINATION' FIELD MC_PASSWORD
ID 'DSTLEN' FIELD MI_PWD_LEN.
CALL FUNCTION 'FTP_CONNECT'
EXPORTING
USER = 'userid'
PASSWORD = MC_PASSWORD
HOST = 'servername'
RFC_DESTINATION = 'SAPFTP'
IMPORTING
HANDLE = MI_HANDLE
EXCEPTIONS
NOT_CONNECTED = 1
OTHERS = 2.
CHECK SY-SUBRC = 0.
CALL FUNCTION 'FTP_COMMAND'
EXPORTING
HANDLE = MI_HANDLE
COMMAND = 'dir'
TABLES
DATA = MTAB_DATA
EXCEPTIONS
TCPIP_ERROR = 1
COMMAND_ERROR = 2
DATA_ERROR = 3
OTHERS = 4.
IF SY-SUBRC = 0.
LOOP AT MTAB_DATA.
WRITE: / MTAB_DATA.
ENDLOOP.
ELSE.
do some error checking.
ENDIF.
CALL FUNCTION 'FTP_DISCONNECT'
EXPORTING
HANDLE = MI_HANDLE
EXCEPTIONS
OTHERS = 1.
Execute external commands (FTP Scripts)
The following code shows the syntax of the FM 'SXPG_COMMAND_EXECUTE'. You pass it the external command created within transaction SM69 and it will execute it.
DATA: ld_comline
LIKE sxpgcolist-name,
ld_param LIKE sxpgcolist-parameters,
ld_status LIKE extcmdexex-status,
ld_output LIKE btcxpm OCCURS 0 WITH HEADER LINE,
ld_subrc LIKE sy-subrc.
REFRESH ld_output.
MOVE 'FTP_DATA_IN' to ld_comline. "Maintained using trans SM69
Execute external command, contained in 'ld_comline'
CALL FUNCTION 'SXPG_COMMAND_EXECUTE'
EXPORTING
commandname = ld_comline
additional_parameters = ld_param "Params passed to script
operatingsystem
= 'UNIX'
IMPORTING
status = ld_status
TABLES
exec_protocol = ld_output
EXCEPTIONS
no_permission
= 1
command_not_found
= 2
parameters_too_long
= 3
security_risk
= 4
wrong_check_call_interface = 5
program_start_error = 6
program_termination_error = 7
x_error = 8
parameter_expected = 9
too_many_parameters = 10
illegal_command = 11
wrong_asynchronous_parameters = 12
cant_enq_tbtco_entry
= 13
jobcount_generation_error
= 14
OTHERS
= 15.
IF sy-subrc NE 0.
ENDIF.
Maybe you are looking for
-
Cant drag files to WD HD - it is formatted to Mac OS Extended (Journaled)??
Hi I have my WD Hardrive formatted to my mac book air and have transfered files in the past with no problem- is it formatted to Mac OS Extended (Journaled) so I am not sure where I am going wrong considering its always been fine in the past.. There i
-
On my new computer I installed Itunes. I wanted Itunes to use my portable harddrive for music, but instead it copied my library to the hard drive of my computer, filling it almost full. I didn't realize this happened until I synced my iphone to Itu
-
Can't get email for past three days on iPad.
I have an iPad2 and for past three days when I go to Mail app the "checking..." message at the bottom just goes on and on and nothing ever comes in. My Mail on iPhone and my MacBookPro all come in fine. I have tried changing my Apple I'd password,
-
How can I fix this red blinking SYS LED light?
I am having problems with the extender losing signal and the GPS turns red and the SYS light is slow blinking red. I just spent 40 minutes on the phone with a Verizon tech who had me unplug it and just pretty much said "Sorry, there nothing we can d
-
Load Master Data InfoObject using Query as Datasource
I there a way to use a BW Query as a Datasource to load a Master Data InfoObject. I have a query that calculates DSO for a customer and would like to update a custom DSO attribute in 0Customer