How to port project from linux to windows.
i had a project developed in linux which has lot of jar files, i used to run it through make file but now i want to port the project on windows, can any one help me in making a batch file, because i have to include a lot of jar file ....
i am totaly confused who could i do that.
i followed the tutorials of batch file but i didnt work.
can any one send me a piece of batch file code showing how to include a folder of jar files and how to run a class files using jar files.....
perhaps you should look into MANIFEST files. you should be able to set up all your libs in there.
Similar Messages
-
Is possible restore backup full from linux to windows?
Is possible restore backup full from linux to windows, I need know if is possible.
There are any document about it?Hi
Yes because They are in little endian.
http://apunhiran.blogspot.com.tr/2009/03/how-to-moveconvert-database-from-linux.html
Regards -
File Transfer from LINUX to WINDOWS....?
I have to copy the auto backup .dmp file from Linux to Windows in Same Network. Can You please suggest me how to do this task through Shell Script.
So i can schedule the running time of Shell script through DBMS_SCHEDULER and at that specified time files will copy successfully....
Please help me...Thank you.Rajnish,
Check this link : Scripting and Task Automation :: WinSCP
Command-line Options :: WinSCP
Converting Windows FTP script to WinSCP SFTP script :: WinSCP
Onkar
Message was edited by: onkar.nath -
How to clean project from comman line ?
How to clean project from comman line ?
I would like to invoke the same functionality as in Flex
Builder Project -> clean... -> clean all projects...
but from command line is it possible ?You can:
1) Perform a project clean up (p.153 of the user manual) - it removes any unused recordings, samples and other files
2) Consolidate project (p. 154 of manual) - this copies all the used audio material into the project folder and also deletes any empty folders within project folder, making it easier to navigate
3) Save project as a copy - this creates another project folder, but without all the backups and other additional files -
How to import project from Final cut pro 7 to X ?
how to import project from Final Cut Pro 7 to X ?
please tell me if FCP 7can create any kind of file that FCP X can read ?
I can read FCP 7 .mov file with QuickTime, but not with FCP X ? what can I do ?
Sould I use a Premiere on PC to make files compatibles in between 2 apple Softwares ?
I have a lot a files that have been created with FCP 7 and I just buy FCP X , so I am Stuck !!!
thank you in advance -
Error in Transport Tablespace from linux to windows
I am testing the cross-Platform Transport Tablespace. As per the oracle, we can transport tablespace from linux to windows without conversion because both are using same endian (Little).
But i am fail to do Transport Tablespace from Linux to Windows.
I am performing Transport Tablespace process as following:
from Source Oracle Database server(red had linux as 4 32-bit oracle version:10.2)
Sql> alter tablespace TEST read only;
$ expdp system/pass dumpfile=test.dmp directory=export_dir transport_tablespaces=test transport_full_check=y
after this i am coping test.dmp and data file (test.dbf) to the target machine (ms windows xp 32-bit with oracle 10.1) .
on Target Machine (with Ms windows xp os) here i am giving the following command:
impdp system dumpfile=test.dmp directory=exp_dir transport_datafiles=/exp_dir/test.dbf
but it is giving following error:
ora-39001: invalid argument value
ora-39000: bad dump file specification
ora-31619: invalid dump file "c:\pks\1103.dmp"
what may by ...
Prabhakernow for version compatibility i am inclusding version option with expdp
edpdp scott dumpfile=1103.dmp directory=pks transport_tablespaces=prabhu version=10.1.0.2.0
but now it is giving following error:
Import: Release 10.1.0.2.0 - Production on Saturday, 11 March, 2006 19:07
Copyright (c) 2003, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
Master table "SCOTT"."SYS_IMPORT_TRANSPORTABLE_01" successfully loaded/unloaded
Starting "SCOTT"."SYS_IMPORT_TRANSPORTABLE_01": scott/******** DUMPFILE=1103.DMP DIRECTORY=PKS TRANSPORT_DATAFILES=C:\PKS\PRABHU version=10.1.0
Processing object type TRANSPORTABLE_EXPORT/PLUGTS_BLK
ORA-39123: Data Pump transportable tablespace job aborted
ORA-06550: line 2, column 2:
PLS-00306: wrong number or types of arguments in call to 'BEGINIMPORT'
ORA-06550: line 2, column 2:
PL/SQL: Statement ignored
Job "SCOTT"."SYS_IMPORT_TRANSPORTABLE_01" stopped due to fatal error at 19:07
regards
Prabhu -
How to share internet from mac to windows
Any one helps me how to share internet from mac to windows? I have created an internet sharing on macbook, a Mac can connect to internet, but windows pc can't connect with this sharing. I don't know why?
I am not a Windows guru. However, in XP there is a Wireless Network icon at the lower right side. Click on that, select the network you want to join, insert the password and that's it. Any issues speak to a Windows guru.
-
How to open project from an earlier version (RH x3) using RoboHelp 6.
Hello everyone, I need your help. I have recently upgraded
from RH x3 to RH V6. I have just completed the installation of RH6
after spending long time with Adobe customer support as it took
them long time to figure out how to provide me the unlocking key to
install RH v6.
BTW I have only installed RoboHelp 6 by itself. I did not
install their Source Control because we already have Visual Source
Safe which we have been using in our company.
Also, since I had Adobe Reader 8 installed on my PC, I did
not install Acrobat Element 7 either. As I suppose if Acrobat 7 or
higher is installed RH v6 was not going to install Acrobat Element
7.
Well, now after I have installed RH v6, my first step is to
find out how to open project from an earlier version (RH x3) using
RoboHelp 6.
RH x3 is installed on my old PC and I am working on my new PC
where I have installed RH V6.
Sorry, for providing you too many details, the purpose is
only to give you a clear picture.
Please, give me your feedback if I am doing everything
correct and how should I open the project from an earlier version.
ThanksHi Peter,
Thank you so much for the response. Actually, after I posted
the question on Forum we had lost internet connection for some time
and I just went ahead and tried it by myself.
This is what I did – since we use MS Visual Source
Safe, my all files were in the working folder of VSS in my c drive.
I just clicked the Open tab/More Files in RoboHelp Starter and
located the RoboHelp HTML Project File. It opened without any
problem. Everything looks alright.
Is there anything specific I should be checking to make sure
if it is working fine in this version of RH. Because I did not
create this project, somebody else did and I have never used this
tool before this is the first time I will be using.
I found your site pretty helpful though and it did have some
information about Source Safe. I still have one question related to
Visual Source Safe that Is RoboHelp v6 linked to VSS automatically
and check the files out from it automatically whenever a project is
opened or we have to manually set the link between the RH6 &
VSS.
In RH x3 whenever I would open a project it would prompt a
message that in order to open this project the following files need
to be writable, would you like to make them writable, selecting
that option would checkout all the files from the VSS to make them
writable. However, in RH V6 I opened an existing project and it
opened without checking out the project files from VSS. Do you have
any idea what’s happening?
Ps: Do you recommend any book on RH 6 for starters or any
other recommendation?
Your help is always appreciated -
File Upload Problem from Linux to Windows and Windows to Linux
Hi,
I am a newbie in the flex environment.
I have faced a problem for file upload from linux to windows and windows to linux
And I have put crossdomain.xml file in root folder, still this problem is appear.
Please help me, if anybody know the answer.
Thanks and Regards,
Senthil KUmarHi Pauley,
I thought you are moving from unix to windows. Now I got it.
Make sure that the folder is shared and have necessary permissions. Please see few suggestions here:
Re: NFS or FTP for file on Ip 10.x.y.z
Regards,
---Satish -
HT202662 how to transfer music from iPhone to windows 7 pc?
how to transfer music from iPhone to windows 7 pc?
See Recover your iTunes library from your iPod or iOS device.
tt2 -
Printing from Linux to Windows shared printer
I am trying to print from Linux to a shared printer on a Windows XP PC. I installed cups and foomatic, started cupsd and configured the printer (HP Deskjet 720C) in KDE control centre. When I try to print a test page I get the following message:
Catastrophe! - KNotify
A print error occurred. Error message received from system:
cupsdoprint -P 'deskjet' -J 'KDE Print Test' -H 'localhost:631' -U 'root' -o ' multiple-document-handling=separate-documents-uncollated-copies orientation-requested=3' '/opt/kde/share/apps/kdeprint/testprint.ps' : execution failed with message:
client-error-not-possible
I have Googled like crazy but couldn't find a working solution.
For reference:
/etc/cups/printers.conf
# Printer configuration file for CUPS v1.1.23
# Written by cupsd on Wed 29 Jun 2005 09:33:20 PM BST
<DefaultPrinter deskjet>
Info HP DeskJet 720C
Location
DeviceURI smb://guest@MSHOME/ANDROMEDA/HPDeskJet
State Idle
Accepting Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
AllowUser root shaurz
</Printer>
/etc/cups/cupsd.conf (comments stripped)
LogLevel info
Port 631
<Location />
Order Deny,Allow
Deny From All
Allow From 127.0.0.1
</Location>
<Location /admin>
AuthType Basic
AuthClass System
Order Deny,Allow
Deny From All
Allow From 127.0.0.1
</Location>
lpstat -t
scheduler is running
system default destination: deskjet
device for deskjet: smb://MSHOME/ANDROMEDA/HPDeskJet
deskjet accepting requests since Jan 01 00:00
printer deskjet is idle. enabled since Jan 01 00:0Rather than use SMB to connect from Lion to the Windows XP printer share, a better method is to enable Print Services for UNIX on Windows XP and then use LPD on the Mac to print via the Windows share.
To install Print Services for UNIX on Windows XP:
Log on to the Windows server with an administrative-level account.
Start the Add/Remove Programs tool in Control Panel.
Click Add/Remove Windows Components.
Click Other Network File and Print Services, and then click Details.
Click to select the Print Services for UNIX check box, and then click OK.
Follow the instructions on the screen to finish the installation
If you haven't done so already, share the printer on Windows XP and make the name one word - no spaces or special characters
With the print services enabled you can then create the printer queue on Lion.
Open Print & Scan and click + to add a printer
Select the IP icon and set the protocol to Line Printer Daemon - LPD
For the Address, enter the IP address of the Windows XP computer
For the Queue name, enter the share name set for the printer in Windows XP
Name and Location are free text so you can set this to something meaningful
For the Print Using menu, select the supporting printer driver. Note that like connections via SMB, the vendors driver for Lion in some cases cannot be used and an alternate like those offered by the Gutenprint suite must be used.
Click the OK button to complete the queue creation.
Now you are ready to test the new print queue. -
How to uninstall JRE from LINUX OS
hi,
I want to uninstall JRE old version from Linux OS.
I go to add/remove panel, but there is no option uninstall the JRE from LINUX OS.(i expect as Like windows)
In user manual from SUN for JRE also doesnot have how to uninstall JRE.
Any idea abt it.
Also, i want to put the JRE in CD,and from CD i want to install that JRE using linux shell script. is it possible.
If any one know, pls tell me.
thank you.This is from the following link: http://www.java.com/en/download/help/5000011600.xml#jre
II. JRE Uninstallation
There are two ways to uninstall the JRE. Please use the method that you used when you installed the JRE. For example, if you used RPM to install the JRE, then use the RPM uninstallation method.
RPM uninstallation
Note: If you have RPM on your Linux box, you should first find out if Java is already installed using RPM. If Java is not installed using RPM, you should skip reading.
Open Terminal Window
Login as the super user
Try to find jre package by typing: rpm -qa
If RPM reports a package similar to jre-<version>-fcs, then Java is installed with RPM.
Note: Normally, you do not need to uninstall JRE with RPM, because RPM is able to uninstall the old JRE when installing a new version! You may skip reading, unless you want to remove JRE permanently.
To uninstall the JRE, type: rpm -e jre-<version>-fcs
Self-extracting file uninstallation
Find out if Java is installed in some folder. Common locations are /usr/java/jre_<version> or /opt/jre_nb/jre_<version>/bin/java/
When you have located the folder, you may delete folder.
Warning: You should be certain that Java is not already installed using RPM before removing the folder.
Type: rm -r name. For example: rm -r jre1.5.0 -
How to delete projects from Vault
Ok, here is the issue.
I work remotely on a laptop and my main library and vault are on my home computer.
I only keep the last couple of projects on the laptop and use the vault to backup those projects. I used managed files.
When I get home from the road, I export/import the projects to the home machine and master library to do further work and use vault on an external for backup.
So, on the laptop, I will delete projects to make more space on the hdd and I dont need them on the laptop any longer (they are already in the master library and vault at home).
However, the problem is that when I delete those projects and then update the vault, it does not seem to delete those projects in the vault. So the vault just keeps growing in size until it fills up and I cant seem to delete those projects from the vault. Again, both the laptop library and the laptop vault are simply for backup while on the road so I'd like to have the vault on the portable be able to stay synced with the library on the laptop. When I delete a project, it does the same in the vault to keep the external space consistent as well.
Is there any way to do this? Shouldnt the vault basically just back up the library and when something is deleted from the library it should be deleted from the vault as well?
As it is, I need to delete the entire vault when it fills the external and create a whole new one after deleting the projects from the library.
Is there an easier way?I have not contacted AppleCare, but will if this is how its working for others.
Have you tried this and are sure it is working that way? After all, last week after deleting three projects from the laptop and main library and then updating the vault, I had a vault that was over 80 gigs in size while the library was now less than 20 gigs in size.
After deleting the vault and starting a new one, the new vault was approximately the same size as the library, actually slightly smaller like it is with the master vaults at home with the main library.
I have twice now had my external fill up with the vault while I had been constantly deleting old projects on the laptop. So it just seemed to keep adding new stuff to the vault, but not get rid of the old that I was deleting. -
How to delete project from dtr
HI, how can i delete project from dtr?thanks
Hi Lei,
Please check the following links.Also the SAP Note 864515 explains how to delete a development component.
How to delete Development Components in NetWeaver Java Development Infrastructure (JDI)
Regards,
Yasar -
How to move projects from one JWS to another JWS ?
Hi all,
I have two JWS :
- AppOne.jws , projects :
- Model1
- UserInterface1
- AppTwo.jws , projects :
- Model2
- UserInterface2
How can I move Model1 & UserInterface1 project from AppOne.jws to AppTwo.jws ?
The entity object & view object in Model1 and Model2 is in different packages.
Is it possible ?
Thank you,
xtantoIf you just add Model1.jpr and UserInterface1.jpr to AppTwo.jws, does that work?
Thanks,
Brian
Maybe you are looking for
-
Number of messages in Smart Mailbox
A question & some relavent thoughts: In Mail, the number of Unread messages is shown the right of each mailbox. But what are the total number messages? Alternatively, how many Read messages are there? I have many folders. I am trying to create se
-
Method for uploading Customer Hierarchy Data
hi experts, i have a requirement in which i need to upload Customer Hierarchy data into ECC system from CRM system. I need to know is there any method in LSMW by which i can do it? thanks, Ags.
-
Adding item level field to field catalog for a PPF for Outbound Delivery
Hi, We wish to send a method call to an external system at the time of PGI of the Outbound Delivery Order for the combination of Product/Ship To combination. Since Product is at item level and not in the standard field catalog, I added it to the fiel
-
DAD and Database Authentication with db link
I have a report that access a table via dblink and displays the result set. I am trying to implement the database authentication for this using DAD. I created the new DAD without the plsqlusername and password. When I run this application with the va
-
I can't fix - or dump - Reader 8.1.2
I had Adobe Reader for a while and had been receiving constant notifications that there were updates I needed to download so I finally did. Ugh! Problem after problem after that. Not sure what corrupted the files, but I couldn't print and kept get