How to post GI of items used in plant maintenance

Dear gentlemen
I created material type FHMI. Now, the question is: suppose I want to post a tool issue to an employee. Later, this employee would have to bring this tool back to the storage location. What movement type should I use?
Regards,
Carlos Piana
La Universal
Guayaquil, Ecuador, South America

hi
you can reserve the material in the order then issue the material againgst the order using t code MB1A,but the cost will be incurred to the cost center.so while returning you can use the same t-code but with MVT type 262 .
you can also use T code MIGO_GI to issue and get back ,(using MVT 201 and reversing 202)
regards
thyagarajan

Similar Messages

How to add new line item using BAPI BAPI_CONTRACT_CHANGE for contract-ME32K

HI Experts,
how to add new line item using BAPI: BAPI_CONTRACT_CHANGE for existing contract.
Requirement:
Already the contract having two line items using ME31K.
Custom program has to add new line items in existing contract.
Thanks,
Sendil

I got the solution:
We can do like this:
1. Get all details using details, BAPI_CONTRACT_GETDETAIL.
2. After getting results, append new line item. Then use your BAPI.
Check this posting program.. where this bapi is used, use the same coding technique.
IDOC_INPUT_PURCONTRACT_CHANGE

Reg:how to post the parked documents using BDC

Duplicate message in General deleted. Please do not post the same question in more than one forum.
Hi
I am creating parked Documents using FV50. I am able to check them using FBV0, I am able to select and post the documents using the same transaction. Its working fine. However I want to post the selected parked documents using BDC. I am having problems as the output in FBV0 is in ALV report format. HAving problems selcting the parked documents to be posted. As there any way to post the selected parked documents using BDC.
Please suggest me a solution for this.
Thanks,
Satish
Edited by: Matt on Dec 3, 2008 7:40 PM

Hi Rob,
Thank you for ur reply, can u send that code how u post the parked documents using BDC for FBV0 transaction. Please send the code.
Thanks,
Satish

How can I scan multiple items using my HP photosmart 2610 and them be able to be in one attachment?

I have an HP photosmart 2610 4 in1. How can I scan multiple items and put them in the same attachment using e-mail? Using my laptop.

Hi @needyrhelp,
Welcome to the HP Forums!
I see that you are wondering how to scan multiple items using your HP photosmart 2610 and for them to be able to be in one attachment in your e-mail. I am happy to look into this for you!
Please see the how to scan guide for the Operating System you are using. Here is the list of how to scan guides, Scan. Select your Operating System from the list, then select How to scan with HP software, then How to scan a multi-page original text document into a single file. You will need to scan each page one at a time, and add it to the same document. The how to scan guide will show you how. After done scanning to the file, then see the link for How to attach a scan to an email.
If you do not know the Operating System you are using, please visit this website. Whatsmyos.
Hope this information is helpful, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

How to populate an application item using ONCHANGE.

I am trying to populate an application item, TAB_INSTATE using an onchange command. I cannot figure out how to do it. Does anyone know the syntax, or can you point me in the right direction. I am unfamiliar with javascript and have been relying on previous examples, posts. thanks
apex_item.select_list_from_query
(20,
c020,
'select partner_name, partner_abbrev
from partners
where state_code is not null order by partner_name ',
'style="width:100px"'
|| 'onchange="'
|| CASE
WHEN :p300_authorization1 = 1
THEN 'f_set_casc_area(this,f21_'
|| LPAD (seq_id, 4, '0')
|| ');'
ELSE
<THIS IS WHERE I WOULD LIKE A THE VALUE OF c020 TO BE PLACED INTO :TAB_INSTATE>
END
|| 'f_set_casc_subarea(this,f22_'
|| LPAD (seq_id, 4, '0')
|| ')"',
'YES',
'0',
'- Select State -',
'f20_' || LPAD (seq_id, 4, '0'),
NULL,
'NO'
) in_state,

Hello Karen,
>> I am trying to populate an application item, TAB_INSTATE using an onchange command.
I believe I answered you in here - Re: once more...4 cascading LOVs, 3rd is hidden 4th no longer works However, for future reference…
You don’t have a direct access to an application item, using JavaScript, because application items don’t render on page. You can, however, using the AJAX framework to do that, using the add() method. The generic code I’m using is the following:
<script type=”text/JavaScript”>
function setSessionValue(pItem, pValue) {
var get = new htmldb_Get(null,html_GetElement('pFlowId').value,null,0);
get.add(pItem, pValue);
get.get();
get = null;
</script>This code can set any page or application item value.
Regards,
Arie.

How to hide/disable menu items using Javascript in Acrobat 9 pro or later

We just wanted to know on how to hide/disable menu items for e.g. 'Open' menu item under 'File' menu in Acrobat 9 or later on Mac using Javascript. It would be useful if you could provide if any other option is in place already.

Not sure it will work, but you can try using the app.hideMenuItem() method. See reference here.

How to update 500 list items using Rest API

Hi All,
i have requirement that is "required to update 500 list items using rest Api".
how can i do it,please share your thoughts with me.
Thanks,
Madhu.

Didn't get you correctly, if you asking reference for REST API to update list items please refer below links
http://msdn.microsoft.com/en-us/library/office/jj164022(v=office.15).aspx
Destin -MCPD: SharePoint Developer 2010, MCTS:SharePoint 2007 Application Development

How to post Asset acquisition by using BAPI_ACC_DOCUMENT_POST

Hello All,
Can we use the bapi BAPI_ACC_DOCUMENT_POST to post ASSET ACQUISITION?
I have posted ASSET ACQUISITION by using the transaction code F-90 successfully and the values are updated in asset aswell. but, I could not generate the same result by using the bapi BAPI_ACC_DOCUMENT_POST.
Can anybody please suggest me how should I use this bapi to post Asset acquisition?
Thanks in advance for your help.
Regards,
Vijay

hi,
BADI AC_DOCUMENT is available in the system.
This badi is called whenever the account document is posted in the system.
With the help of this badi, i guess you can change the t.code value.
regards,
Vinod.

How to POST (create) a folder using CMIS REST in Webcenter

Has anyone tried to create a new folder using CMIS REST/Atom calls in Webcenter ?
Here's what I try to do:
http://172.31.100.150:7001/cmisrestprelim/cmis/children/MyContentServer ==>POST (using the REST client plug-in in Firefox)
Content-Type=application/atom+xml
<?xml version="1.0" encoding="utf-8"?>
<entry xmlns="http://www.w3.org/2005/Atom"
xmlns:cmisra="http://docs.oasis-open.org/ns/cmis/restatom/200908/"
xmlns:cmis="http://docs.oasis-open.org/ns/cmis/core/200908/">
<title>mytestfolder</title>
<cmisra:object>
<cmis:properties>
<cmis:propertyId propertyDefinitionId="cmis:objectTypeId"><cmis:value>cmis:folder</cmis:value></cmis:propertyId>
</cmis:properties>
</cmisra:object>
</entry>
This piece of code should create a folder called "mytestfolder" in the root directory.
When I POST this, I get the following internal server error:
<pre>javax.servlet.ServletException: com.sun.jersey.api.container.MappableContainerException: com.bea.content.RepositoryException: Please specify a valid ID object. Make sure the repository name is not null.
     at com.sun.jersey.spi.container.servlet.WebComponent.service(WebComponent.java:310)
     at com.sun.jersey.spi.container.servlet.ServletContainer.service(ServletContainer.java:314)
     at com.sun.jersey.spi.container.servlet.ServletContainer.service(ServletContainer.java:239)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at com.bea.content.manager.servlets.ContentServletFilter.doFilter(ContentServletFilter.java:178)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
Anyone has an idea how to solve this ?

I must admit that I'm fairly new to all the CMIS and REST-things....
So there are a couple of things in your answer that are a bit hazy to me.
It looks like you are more familiar with all this.
How do I find a creatable folder ? And what should be the URI to POST a new folder ?
I try to POST a new folder using this URI:
http://172.31.100.150:7001/cmisrestprelim/cmis/children/MyContentServer/IDC:Folder%2F13
(IDC:Folder%2F13 is the /Contribution Folders/Documents folder in my repository)
This POST keeps me giving the following internal server error:
<pre>javax.servlet.ServletException: com.sun.jersey.api.container.MappableContainerException: com.bea.content.RepositoryException: Please specify a valid ID object. Make sure the repository name is not null.
     at com.sun.jersey.spi.container.servlet.WebComponent.service(WebComponent.java:310)
     at com.sun.jersey.spi.container.servlet.ServletContainer.service(ServletContainer.java:314)
     at com.sun.jersey.spi.container.servlet.ServletContainer.service(ServletContainer.java:239)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at com.bea.content.manager.servlets.ContentServletFilter.doFilter(ContentServletFilter.java:178)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
Thanks for helping me out.

How to Post Intercompany line items- DP93 ?

hi,
I am trying to do intercompany billing using DP93. In DIP profile source is given as Intercompany line items. i have posted activity confirmation.But while doing DP93, i am getting error as non expenditure items found.
Can any one tell , how to set up DIP profile and posting for DP93

Hi,
Is DIP profile assigned to your sales orer ( item detail->Sales B tab) and Please check the consistency of your DIP profile by ODP2, check if there is any error?
Furthet check if you have followed the below steps.
There is useful link available in sdn sap wiki with the title intercompany resource related billing.
Check and above steps and revert back.
Regards
Ashu

How to Read Outlook mail item using JACOB

Hi,
I am try to read all email item from outlook.
Using JACOB api i am read all folders from outlook. what i want is i want to read only
the mail items from inbox and other custom folders and skip other contact, calendar
folders. How can i implement this using JACOB.
How to use MailItem attribute.
Using this codeDispatch items = Dispatch.get(myFolder, "Items").toDispatch();I am read all items from outlook. instead of items i am using MailItem its throw exception.
so please help to read mail items only from outlook
With Regards,
Ganesh Kumar

Hi!
See Java Api Msgparser in GNU General Public License...
A parser for .msg Files in Java :
[http://auxilii.com/msgparser/|http://auxilii.com/msgparser/]
Use POI... Apache POI - Java API To Access Microsoft Format Files...
regards,

How to post multiple http requests using a single http connection in java

I am using the httpurlconnection class and it allows only to post one request on a connection. I require to post multiple http requests by opening a single connection. Code examples please. Thanx in advance.

Hi
I found this article through Google. I hope it helps a little
http://www.developer.com/tech/article.php/761521
D

How to change price of item using salesorder create bapi

hi all,
     As per requirement i have to change price of the item while i am creating sales order using sales order create bapi. kindly tell me the process or if possible any sample program.
      thanks in advance
thanks,
pavan
Message was edited by: pavan kumar pisipati

hi max ,
      i created sales order using following code. from here onwords i have to update to change the price of the item. kindly do the needful. i am working 4.7 ides
<b>report zmybapi1        .
data : my_order_header_in like bapisdhd1 occurs 0 with header line,
       my_order_header_ix like bapisdhd1x.
data : my_orderitemsin like bapisditm occurs 0 with header line,
       my_orderitemsix like bapisditmx occurs 0 with header line.
data : my_order_partners like bapiparnr occurs 0 with header line.
data : my_return like bapiret2 occurs 0 with header line.
data : w_vbeln like bapivbeln-vbeln.
data:
     my_orderschedulesin like bapischdl occurs 0 with header line,
     my_orderschedulesinx like bapischdlx occurs 0 with header line.
start-of-selection.
this is to assign values to internal table my_order_header_in
my_order_header_in-doc_type   = 'TA'.
my_order_header_in-sales_org = 'JNJ1'.
my_order_header_in-distr_chan = '02'.
my_order_header_in-division   = 'J1'.
my_order_header_in-sales_off = 'JNJ1'.
my_order_header_in-purch_no_c = 'testbapipo'.
my_order_header_in-purch_date = sy-datum.
my_order_header_in-req_date_h = sy-datum.
append my_order_header_in.
this is to assign values to internal table my_orderitemsin
my_orderitemsin-material      = '000000000000000727'.
my_orderitemsin-plant         = 'JNJ1'.
my_orderitemsin-target_qu     = 'EA'.
my_orderitemsin-target_qty    = '50'.
append my_orderitemsin.
this is to assign values to internal table my_order_partners
my_order_partners-partn_role = 'AG'.
my_order_partners-partn_numb = '0000000011'.
append my_order_partners.
my_order_partners-partn_role = 'WE'.
my_order_partners-partn_numb = '0000000011'.
append my_order_partners.
This is to assign values to internal table my_orderschedulesin
my_orderschedulesin-itm_number = '10'.
my_orderschedulesin-req_qty   = '10'.
append my_orderschedulesin.
my_orderschedulesin-itm_number = '20'.
my_orderschedulesin-req_qty   = '20'.
append my_orderschedulesin.
my_order_header_ix-updateflag = 'I'.
my_order_header_ix-doc_type   = 'X'.
my_order_header_ix-sales_org = 'X'.
my_order_header_ix-distr_chan = 'X'.
my_order_header_ix-division   = 'X'.
my_order_header_ix-sales_off = 'X'.
my_order_header_ix-purch_no_c = 'X'.
my_order_header_ix-purch_date = 'X'.
my_order_header_ix-req_date_h = 'X'.
my_orderitemsix-updateflag    = 'I'.
my_orderitemsix-material      = 'X'.
my_orderitemsix-target_qty    = 'X'.
my_orderitemsix-plant         = 'X'.
my_orderitemsix-division      = 'X'.
my_orderitemsix-target_qu     = 'X'.
append my_orderitemsix.
my_orderschedulesinx-updateflag        = 'I'.
my_orderschedulesinx-itm_number       = 'X'.
my_orderschedulesinx-req_qty          = 'x'.
append my_orderschedulesinx.
my_orderschedulesinx-itm_number       = 'X'.
my_orderschedulesinx-req_qty          = 'x'.
append my_orderschedulesinx.
call function 'BAPI_SALESORDER_CREATEFROMDAT2'
    exporting
SALESDOCUMENTIN               =
      order_header_in               = my_order_header_in
      order_header_inx              = my_order_header_ix
SENDER                        =
BINARY_RELATIONSHIPTYPE       =
INT_NUMBER_ASSIGNMENT         =
BEHAVE_WHEN_ERROR             =
LOGIC_SWITCH                  =
TESTRUN                       =
CONVERT                       = ' '
    importing
      salesdocument                 = w_vbeln
    tables
      return                        = my_return
      order_items_in                = my_orderitemsin
      order_items_inx               = my_orderitemsix
      order_partners                = my_order_partners
    ORDER_SCHEDULES_IN            = my_orderschedulesin
      order_schedules_inx           = my_orderschedulesinx
ORDER_CONDITIONS_IN           =
ORDER_CONDITIONS_INX          =
ORDER_CFGS_REF                =
if sy-subrc ne 0.
    write: my_return-message, my_return-number, my_return-type.
else.
     call function 'BAPI_TRANSACTION_COMMIT'
     EXPORTING
       WAIT          =
     IMPORTING
       RETURN        =
      write: my_return-message, my_return-number, my_return-type.
endif.</b>
thanks,
pavan
Message was edited by: pavan kumar pisipati

How to split the Order items using standard procedure

Hi All,
               I am a BW Consultant and currently working for Sales Module. I have one question regarding the Order Item changes in VA02. For example a user creates one SO with Item 10 and the quantity is 1000. Later they want to split this Order into two i.e. they change the first item quantity to 500 and create another item (20) with Quantity 500 .Users are doing this ,because of allocation process.
             Now I would like to ask whether this is a standard procedure to follow.I have no issues with the new item , I am not sure how they are changing the first order item qty in VA02, because Qty is greyed out . My assumption is, they are deleting the item first and then recreating with the new quantity.
            Hence I would like to check is there any other option/process available to change the quantity and also would like to know whether it is a standard procedure? Reason I am asking this question is,extractor is not picking the correct records.Hence I suspect this is not a standard procedure to follow.
Please advice .Thanks for your time.
Thanks.

hi raja,
go to shedule line data of position 10
here you want to have 1000 pcs for the 18.12.2009
change her into
500 pcs for the 18.12.2009   and
500 pcs for the 21.12.2009
at 18.12.2009 you will get adelivery of 500
at 21.12.2009 you will get the rest.
in total, the Position has 1000 pcs.
hans

How to Export two web items using one export button in WAD (3.X) ?

Hello Friends,
I am trying to export two reports using one export button which are in two columns of the table in a web template created in WAD 3.X. but not able to do it. i also tried to doing the same thing in BI 7 copied that code and pasted in 3.X but that doesn't work.
can anyone help me on that?
Thanks,
Nayan Joshi

hi,
SPS 14 for NW 7.0 is installed. I found out, that the filter pane has should have the property "Affected Data Providers (LINKED_DATA_PROVIDER_REF_LIST)" and the navigation pane not. Look at:
- http://help.sap.com/saphelp_nw70/helpdata/en/16/3ee2416149c717e10000000a155106/content.htm
- http://help.sap.com/saphelp_nw70/helpdata/en/85/08e241aa8e9d39e10000000a155106/content.htm
But in my WDA both items don't have this property. The latest SPS for Front-End-Tools is installed.
Any further ideas?

How to post GI of items used in plant maintenance

Similar Messages

Maybe you are looking for