How to preset the filename for an exported file?

Post Author: yekken83
CA Forum: General
Hi all,
Generally, the exported file name will defaulted to report name. However, anyone know that can i change the exported file name to another specific file name which different as my report name? The exported file naming as following:- Let said i would like to export my report (dailyreport.rpt) into excel file and the exported file name as below:- dailyreport_<Report_Run_Date>.xls **<Report_Run_Date> will be a field which is retrieve from my stored procedure.

Post Author: pvierheilig
CA Forum: General
Hello,
If you've not already solved this, let me ask a couple q's:
What tool are you running this report through for the export (it sounds like you're wanting to automate the process)?
Is it Business Object XI or Crystal Enterprise or simply manually exporting it using the CR designer program or...?

Similar Messages

How to improve the speed for backing up files to time capsule via in hose wifi?

How to improve the speed for backing up files to time capsule via in hose wifi?

via in hose wifi?
Use a bigger hose??
House??
Need to spell this out a bit more..
But speed via 2.4ghz to the TC is restricted by Apple to max 130mbps link speed.. much slower actual transfer.. latest TC and laptops can do 450mbps on 5ghz but you need to be up close.. so place the TC near the device using it.. and force 5ghz connection by using a different name for 5ghz network.

How do i specify the filename for a binary file generated by a JSP?

I am writing a report generator that has the ability to generate Excel files. The user clicks on a link (exporter.jsp), the page's content-type has been set to "application/vnd.ms-excel" which naturally prompts the user to either save to a file or open directly in Excel.
It works fine, but requires the user to manually rename the generated file from "exporter.jsp" to "whatever.xls". Furthermore, Firefox will not let you rename the file in save dialog box, it just automatically saves the file as "exporter.jsp", you must rename it from the file browser.
How do specify the output file name from within JSP?
Btw, right clicking and selecting "save link as" allows for specifying the file name, but the file that is created is empty.
Thanks

You need to set the content-disposition header as well as the content-type.
here is one article on the subject
res.setContentType("application/vnd.ms-excel");
res.setHeader("Content-Disposition", "attachment; filename=" + filename);

How to give dynamic name for csv export files?

Hi,
how we can give dynamic file name for each csv export file? ex(&item_name.csv)
I am using apex 4.1 and IE 6,
thanks in advance
regards
Chandran

Please help me on this
I am using report template as a csv export..
when user click on download link on other page he will redirect to csv export temlate page and he is is directly get the open or save window
but dynamic title name is not working for only for this.
regards
Chandran

How to set the name for an 'unknown' file extension?

Specifics:
I have various file extensions that are recognized by my mac. I would like to know how to create a list of applications that can open it so I do not get a 'There is no Default Application to open this file' error. I would also like to be able to give these file extensions names recognized by the mac.
Just like .txt is a "Textedit Document" and .html is a "HTML Document," I'd like to be able to change the name and assosication of a file and give it its own .icns if possible.
As for the default applications, I know how to set a default application. However, if a mac does not recognize a file extension, adding a new default application to run the file wil actually erase the old one, which is a big pain, especially when your file can be opened with ANY text editor.
I understand that this may involve hacking into the operating system's databases, but if anyone can help, it would be greatly appreciated.

Hi Timo,
My jdev version is 10.1.3.3.0, this is for R12. By PR i mean to say process request and PFR process form request in the controller.
In the Process request of the controller, i am finding the checkbox bean and assigning the firepartialaction for it.
Later in the process form request for the fired event, i am trying to handle the rendered property of the messagetextinput. Is this a right approach?
my code below
public void processRequest(OAPageContext oapagecontext, OAWebBean oawebbean)
super.processRequest(oapagecontext, oawebbean);
OAApplicationModule oaapplicationmodule = oapagecontext.getApplicationModule(oawebbean);
OAMessageCheckBoxBean oamessagecheckboxbean = (OAMessageCheckBoxBean)oawebbean.findChildRecursive("X_FLAG");
if(oamessagecheckboxbean != null)
oapagecontext.writeDiagnostics(this, "Message check box Bean found:", 1);
FirePartialAction firepartialaction = new FirePartialAction("change");
oamessagecheckboxbean.setAttributeValue(PRIMARY_CLIENT_ACTION_ATTR, firepartialaction);
oamessagecheckboxbean.setFireActionForSubmit("change", null, null, true);
oapagecontext.writeDiagnostics(this, "setting fire event", 1);
public void processFormRequest(OAPageContext oapagecontext, OAWebBean oawebbean)
super.processFormRequest(oapagecontext, oawebbean);
oapagecontext.writeDiagnostics(this, "Inside Process Form Request", 1);
if("change".equals(oapagecontext.getParameter(OAWebBeanConstants.EVENT_PARAM)))
OAMessageTextInputBean bean = (OAMessageTextInputBean)oawebbean.findChildRecursive("X_NUMBER");
if(bean!=null){
bean.setRendered(Boolean.TRUE);}
Thanks,
Malar

How to get the filename when parsing a file with d3l

All
After some time have experience with interconnect, IStudio I need the following info. Is it possible to get the filename when parsing a flat file using a d3l? This is needed because we need to store the filename together with the data into the database.
Any examples or directions to some documents are welcome.
Regards
Olivier De Groef

has anyone some info on this

How to set the classpath for external .jar files after importing?

Hi techs,
How to set the classpath in WSAD5.1.2 after importing the .jar file to the WEB-INF/lib folder.
urgent

I got it.
after importing the jar file to the perspective,we need to right click on project name, go to proprties,
goto java build path,
there we need to include the external jar files.

How to change the suffix for externally edited files?

Hi,
How can I change the suffix Lightroom adds to externally edited files?
If I want it to be "-E" instead of "-Edit" for example, or "-Mod" instead of the long and ugly "-Modifier" in french version.
That would help me to get shorter filenames.
Thank you!

Preferences>External Editing tab
Edit Externally File Naming: section
Change the Template

How to set the filename when downloading a file?

I'm working on mvc4. I have generated excel file dynamically using following simple code my hosting is on Azure
I have created a Root path and then try to save that excel file.
Problem is when my Action Result method response comes back it is giving default popup to open a file but file name is having a GUID instead my provided file name
What id wrong any clue?
Excel file generation code:
Microsoft.Office.Interop.Excel.Application xlApp =
new Microsoft.Office.Interop.Excel.Application();
return tempPath;
This method returns something like C:\AppData\Local\dftmp\Resources\11a2435c-998c-4fe8-aa55-8bb42455b4ca\directory\myexcelFILE.xls.
The Download File popup does not give file name as myexcelFILE.xls it gives some GUID why so?
Action
Result method code
public ActionResult DownloadExcel(){
string path = ExcelGenerationCode(fileName);
Stream s = new FileStream(path, FileMode.Open, FileAccess.Read);
return new FileStreamResult(s, "application/vnd.ms-excel");
Ashish Fugat (ashuthinksatgmail.com) SE

http://forums.asp.net/
The above forum has the MVC section.

Changing the order for printing portfolio files in adobe acrobat 9 pro

Does anyone know how to change the order for printing pdf files that are part of a portfolio in adobe acrobat 9 pro? The documentation seems to say that it prints files alphabetically by filename rather than by the internal sort order. This won't work for me. Any ideas? Thanks.

Question1: No.
Question2: No.

How do you change the music for an export from a selection of pictures?

I have iTunes and know how to change the music for a slideshow but if I select pictures from a folder and export to QuickTime how do I change the music?
There is an option to "Add currently selected music to movie" but it always plays the same tune. How do I get an option to select an iTunes song like with the Slideshow? Where are the slideshow sample music files stored? There are 11 files in the sample folder but I can't find any of them on my drive.

Maybe there is some confusion in what I'm telling you. There are two types of slideshows in iPhoto. One creates a special slideshow album that appears in the Source pane on the left side. This is not the one I'm talking about. (You create one of these slideshow albums when you select some photos and click the Slideshow icon (the one with a Plus sign on it) at the bottom of the iPhoto window.
The other slideshow is done from the main library window or from a regular album (not a slideshow album). You either select some photos (or a roll) from the Library or select an album (with a folder icon). Then click the Play button which is on the bottom right hand side of the iPhoto window.
If your Play button is on the left side, then you aren't using the correct one. The one that appears on the left side shows when you've selected a Slideshow Album from the source pane. This type of album has an icon that looks like a couple of slides (the kind you put in a projector).
Does that make a difference?

How to capture the Filename Dynamically in BPM

Hi All,
My scenario is FileBPMFile and my target end should get the same file name as source file name.
If suppose it is simple File to File we can use set attributes option to get the same filename.
But if BPM comes into Middle will it be managed if so how?
Can anyone suggest me?
Thanks,
Kalyan.

Hi,
There is no difference between File>BPM>File & File-->File with the requirement you are looking for.
Since you are not doing any modifications to the filename read from Sender File System no need for dynamic configuration concept in UDF of any mapping.
Do the following
Sender File Adapter Channel.
file name : a particular file name or a .(STAR.STAR) according to your requirement.
e.g., test.xml (or) *.xml (or) . (STAR.STAR)
Enable Adapter- Specific Message Attributes check box and make sure that the File Name check box is enabled. Save and Activate.
Receiver File Adapter Channel
file name : . (STAR.STAR)
Enable Adapter- Specific Message Attributes check box and make sure that the File Name check box is enabled. Save and Activate.
Execute your scenario.
Thanks,
Gujjeti
Edited by: Praveen Gujjeti on Aug 11, 2008 10:14 AM
There is formatting problem by the portal application as some characters will have specific meaning.

In VB Programming code -- How to access the formula for suppressing a field

In VB Programming code -- How to access the formula for suppressing a field
I am using Crystal Reports 2008 v1
Using VB code, I am attempting to modify a Crystal Report before exporting it into a PDF format and then displaying it on the Web.
My problem is that I am unable to access the formula used to dynamically suppress a field.
The following code is working:
mySections = rd.ReportDefinition.Sections
For Each mySection As CrystalDecisions.CrystalReports.Engine.Section In mySections
   ' myFieldToChange is a String set to the text of the field I need to adjust the Suppression
   iloop = 0
   For Each RecObj As CrystalDecisions.CrystalReports.Engine.ReportObject In mySection.ReportObjects
           If mySection.ReportObjects.Item(iloop).Name.ToLower = myFieldToChange Then
               myTextObject = CType(mySection.ReportObjects.Item(iloop), CrystalDecisions.CrystalReports.Engine.TextObject)
               myTextObject.Text = "new field text goes here"
               mySection.SectionFormat.EnableSuppress = True
               ' Here is where I want to change the formula for the Suppression
            End if
            iloop = iloop + 1
    Next
Next
I can not find any reference to the actual suppression formula in the SDK help file.
Note, the EnableSuppress can be set to True for False, but if there is a formula for dynamic suppression, the True or False value is overwritten. The results of the formula determine the suppression.
Is there a way to reference this formula. I know that I can put on in using the Crystal Report Designer software, I need to modify this formula using VB code and the SDK.

Hello, Mark;
If you are using the ReportDocument object you do not have access to the Conditional Suppression formula. You can get around it by using a formula field in the report for the supression and then using the FormulaField code to change it at runtime.
If you want to change the supression condition directly at runtime you need to use RAS and the ReportClientDocument.
Elaine

Reading from a file. How to ask the user for file name at run time????

I have the code to read from a file but my problem is how to prompt the user for the file name at run time.
import java.io.File;
import java.io.FileNotFoundException;
import java.util.InputMismatchException;
import java.util.Scanner;
public class FileRead {
    public static void main(String args[]) {
        Scanner scan = null;
        File file = new File("Results.txt");
        String number;
        try {
            scan = new Scanner(file);
            while (scan.hasNext()){
            number = scan.next();
            System.out.println(number);}
        catch (FileNotFoundException ex1){
            System.out.println("No such file");
        catch (IllegalStateException ex2){
            System.out.println("Did you close the read by mistake");
        catch (InputMismatchException ex){
            System.out.println("File structure incorrect");
        finally{
            scan.close();}
}Any hints would be greatly appreciated. Thank you in advance

I have read through some of the tutorials that you have directed me too and they are very useful, thank you. however there are still a few things that i am not clear about. I am using net beans 5.0 I have placed a text file named Results.txt into the project at the root so the program can view it.
When I use the code that you provided me with, does it matter where the file is, or will it look through everywhere on the hard drive to find a match?
This code compiles but at run time it comes up with this error
run-single:
java.lang.NoClassDefFoundError: NamedFile
Exception in thread "main"
Java Result: 1
BUILD SUCCESSFUL (total time: 3 seconds)
import java.util.Scanner;
import java.io.*;
class NamedFileInput
public static void main (String[] args) throws IOException
    int num, square;
    // this Scanner is used to read what the user enters
    Scanner user = new Scanner( System.in );
    String fileName;
    System.out.print("File Name: ");
    fileName = user.nextLine().trim();
    File file = new File( fileName );     // create a File object
    // this Scanner is used to read from the file
    Scanner scan = new Scanner( file );
    while( scan.hasNextInt() )   // is there more data to process?
      num = scan.nextInt();
      square = num * num ;
      System.out.println("The square of " + num + " is " + square);
}his is the code that i used. It is the same as the code you posted for me (on chapter 23 I/O using Scanner and PrintStream) Sorry im just really stuck on this!!

How to get the filename from J2SE File adapter

In our project scenario , we are using J2EE and J2SE engine both .J2EE for mapping and J2SE for Deliveying the message .
In one senario, routing will be based on the filename .
J2SE Sender File adapter --- XI Adapter --- XI pipe line
So the File reaching to XI pipelane via J2SE File adapter--> XI adapter.
When we are using the dynamic configurator in the XI to get the filename
we are not able to get the file name becasue it is coming to XI via
XI adapter.
How to get the filename ????Hope I am clear about the problem.

hi,
try this
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
//obtengo la Key del FileName
DynamicConfigurationKey keyF = DynamicConfigurationKey.getName();
http://help.sap.com/javadocs/NW04/current/pi/com/sap/aii/mapping/api/DynamicConfigurationKey.html
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70c89607-e4d9-2910-7280-f6746e964516
/people/mohammed.zabiulla/blog/2008/03/26/have-you-ever-tried-to-determine-mail-cc-dynamically
Hope it helps
Thanks
Rodrigo
Edited by: Rodrigo Pertierra on Apr 11, 2008 9:31 AM

How to preset the filename for an exported file?

Similar Messages

Maybe you are looking for