How to preset the FM Statio

Recently, I just got Zen Neeon as my MP3 player.
I had manage to save the Audio tracks into my player but I got problem preseting FM station to my player.
I wish to know how to preset the station?
Or else I will need to keep on tuning for my station.
Thanks!

clefairy978,
Enter FM radio mode, scroll to the FM channel you wanted and then push the scroller in to access the player menu. Scroll down to the option 'Save Preset' and select the preset location you wanted.
Jason

Similar Messages

How to Preset the Web Page resolution

Hello to all. I tried searching but came with nothing. I
wanted to know if there is a way in preseting the page to a
resolution, say 1024x768
Or is it better having the width set at 100% and go from
there?
thank you for the help

Hi,
>>
I wanted to know if there is a way in preseting the page to a
resolution, say 1024x768
>>
you could put all the page contents in a table that´s
tagged with a fixed width of 1024
>>
Or is it better having the width set at 100% and go from
there?
>>
I´d certainly recommend this "fluid" approach, because
you can´t foresee if the visitor has a smaller screen
resolution, or if part of the browser´s "inner screen" has
been reduced by means of a sidebar.

How to preset the order of rows in the outer query of a correlated query ?

Good morning,
I have the following simple query:
select empno,
       ename,
       sal,
       sum(case
             when rn = 1 then sal
             else -sal
           end) over (order by sal, empno) as running_diff
   from (
         select empno,
                ename,
                sal,
                row_number() over (order by sal, empno) as rn
           from emp
          where deptno = 10
         );That calculates a running difference and uses "row_number() over (...)" which is an Oracle specific feature to do so. It yields the following result (which we will consider correct):
     EMPNO ENAME             SAL RUNNING_DIFF
      7934 MILLER           1300         1300
      7782 CLARK            2450        -1150
      7839 KING             5000        -6150I wanted to come up with a solution that was not Oracle specific different solution. I tried the following code:
(EDIT: after additional thought, that code is totally different in meaning and will never come close, to the above result. Consider it wrong and ignore this attempt altogether.)
select a.empno,
       a.ename,
       a.sal,
       (select case
                 when a.empno = min(b.empno) then sum(b.sal)
                 else sum(-b.sal)
               end
          from emp b
         where b.empno <= a.empno
           and b.deptno = a.deptno) as running_diff
from emp a
where a.deptno = 10;but the result is
     EMPNO ENAME             SAL RUNNING_DIFF
      7782 CLARK            2450         2450
      7839 KING             5000        -7450
      7934 MILLER           1300        -8750which is a long way from the original result. I've tried everything I could think of to order the rows before the running difference is calculated but, have been unsuccessful.
Is there a way to change this second query --(without using Oracle specific features)-- without using windowing features that would yield the same result as the first query ?
Rephrase of the above question:
Is there a way, using plain vanilla SQL (that is aggregate functions and set operations such as joins and unions) to create a query that yields the same result as the first one ?
Also, this is not for production code. This is simply an exercise in set manipulation that I'd like to see a solution for.
Thank you for your help,
John.
Edited by: 440bx - 11gR2 on Jul 18, 2010 12:50 AM - correct "ho w" to "How"
Edited by: 440bx - 11gR2 on Jul 18, 2010 1:42 AM - struck out all references to row_number and windowing features being Oracle specific features.
Edited by: 440bx - 11gR2 on Jul 18, 2010 3:51 AM - Noted that my try is woefully wrong and restated the objective to make it clearer.

Hi, John,
One way to get a running total (which is basically what you want) is to do a self-join. Join each row (let's call it the current row, or c) to itself and everything that came before it (let's call this the previous row, or p), and do a regular aggregate SUM, like this:
WITH     got_base_sal     AS
     SELECT       deptno
     ,       2 * MIN (sal)     AS base_sal
     FROM       scott.emp
     GROUP BY deptno
SELECT       c.deptno
,       c.empno
,       c.ename
,       c.sal
,       b.base_sal - SUM (p.sal)     AS running_diff
FROM       scott.emp     c
JOIN       scott.emp     p     ON     c.deptno     = p.deptno
                    AND     (     c.sal     > p.sal
                         OR     (     c.sal     = p.sal
                              AND     c.empno     >= p.empno
JOIN       got_base_sal     b     ON     c.deptno     = b.deptno
WHERE       c.deptno     IN (10)
GROUP BY c.deptno
,       c.empno
,       c.ename
,       c.sal
,       b.base_sal
ORDER BY c.deptno
,       running_diff     DESC
;Output:
    DEPTNO      EMPNO ENAME             SAL RUNNING_DIFF
        10       7934 MILLER           1300         1300
        10       7782 CLARK            2450        -1150
        10       7839 KING             5000        -6150I said you basically want a runninng total. There are two differences between a running total and your requirements
(1) You want to have a total of the negative of what's in the table. That's trivial: use a minus sign.
(2) You want the first item to count as positive instead of negative. That's not so trivial. The query above counts all sals as negative, but adds an offset so that it appears as if the first item had been counted as positive, not negative.
You didn't say what you want to do in case of a tie (two or more rows having the same sal). The query above uses empno as a tie-breaker, so that all sals are calculated as if they were distinct. This is similar to what analytic functions do when the windowing is based on rows. If you want something similar to windowing by range, that might actually be simpler.
The query above calculates a separate running_diff for each deptno, similar to "PARTITION BY deptno" in analytic functions. You happen to be interested in only one deptno right now, but you can change the main query's WHERE clause, or omit it, and the query will still work. If you don't want this feature (analagoud to not having any PARTITION BY), it's easy to modify the query.
You could also get these results using a recursive WITH clause. That meets the criteria of avoiding analytic functions and Oracle-specific features, but not the one about using only plain, simple SQL features.

How to preset the Enable pin functions by software using the frame graber 1422?

Hi
I'm looking for any information related to how to configure by software the enable pins on Frame grabber PCI-1422. I found some examples on NI WWW showing that Frame synchronisation signal was wired to Enable A and Line signal synchronisation signal was wired to EnableB.And this was for an Area SCAN type sensor. But in any case that i wish to use my actual setup/cable for a Line SCAN type camera, do I have to modify my cable in order to connect now the Line synchronisation signal on Enable A? Or there is a possibility to define this my software (Camera file for example)
Thank you
regards
Bruno

Hi bjsimard,
I think your best bet in this case is going to be modifying your cable. I don't think you'll be able to modify your camera file in order to do this.

How to preset the BusinessObjects Enterprise logon with Live Office

Is there a way to define the enterprise logon information including password within an Xcelsius Dashboard that is using a Live Office Connector?
My scneario is that I have a spread sheet that is using Live Office to connect to a WebI report. I need the dashboard to go out and grab the lastest instance of the scheduled WebI report on load.
I can do this but only with a logon prompt. My clients are upper level management and they will not be interested in this dashboard if they have to enter a password just to view the information.
It appears that solutions using Flash Vars with .NET or child SWF are available, but I would really like something simpler.
For Example, if I use a Web Service Connector I can preset user id and password information right in the properties of the object. Can this be accomplished in a Live Office Connector object?
Thanks,
Ty

As far as I know, there is no way to hard code the username and password for LiveOffice.
One thing you can do is use the BOBJ SDK to get the CELogonToken and pass that set that as a FlashVar on the SWF (in the OBJECT or EMBED tag).
The other solution would be to use QaaWS instead as the data source then you can hard code the user name and password.

How to preset the filename for an exported file?

Post Author: yekken83
CA Forum: General
Hi all,
Generally, the exported file name will defaulted to report name. However, anyone know that can i change the exported file name to another specific file name which different as my report name? The exported file naming as following:- Let said i would like to export my report (dailyreport.rpt) into excel file and the exported file name as below:- dailyreport_<Report_Run_Date>.xls **<Report_Run_Date> will be a field which is retrieve from my stored procedure.

Post Author: pvierheilig
CA Forum: General
Hello,
If you've not already solved this, let me ask a couple q's:
What tool are you running this report through for the export (it sounds like you're wanting to automate the process)?
Is it Business Object XI or Crystal Enterprise or simply manually exporting it using the CR designer program or...?

How to change the presets in pop-up menus (CS6 or CR 7, example Photo Filter) with arrow keys?

How to change the presets in pop-up menus (CS6 or CR 7, example Photo Filter) with arrow keys an see at the same time the changes on the photo?
It worked under Windows, now I use OS 10.8 and have to apply a preset with a click or Return button but after that the pop-up menu close so I have to open it once again to change a preset. Please help. Thank you!

The filter panel is a shortcut for the content panel and it only effects the content of that window. So if you have a folder it will only see this as a folder and not with its content. (a Stack behaves about the same, being different in only counting the first file in the filter panel criteria but not what is in the stack itself)
You have a view work arounds, first is use menu view / show items from subfolders (this can take some time especially if you have not used caching before on this content) and this builds visible thumbs for all content and that can be used for filtering.
Or use the find command (Edit / find) and inhere specify the source and fill in the criteria include subfolders and this will give you the correct result.
When you create a smart collection the find command also pops up given you the same opportunity to get the results in a collection, but since a collection is only a bunch of aliases referring to the originals you might be a bit careful with editing and deleting.

We bought a new computer and re downloaded lightroom3, now when I go and try to Develope my picture when I go into Presets the Punch, black and white effects ect won't pull up. How do I fix that?

We bought a new computer and re downloaded lightroom3, now when I go and try to Develope my picture when I go into Presets the Punch, black and white effects ect won't pull up. How do I fix that?Photoshop Lightroom

After I upgraded to Mavericks I was also having this message when I tried to update. There was a previous post about this problem which offered this simple solution which worked for me:
b0n0b0
Re: Recently upgraded to Maverick from SnowLeopard. Unable to get updates from App store.
Mar 15, 2014 9:05 AM (in response to Terence Devlin)
Got it! Thanx. What I did was go to my account, check that they had my new ID and Password which they did, then hit reset button. All fixed.

How come under the "Library Tab" some of the Presets effects show as empty Files thus rendering them unusable?

How come under the "Library Tab" when I select a specific Channel, some of the Presets effects show as empty files thus rendering them unusable?

No problem at all, thks for your reply. I did not download from the App Store. I bought the full Logic Studio software back in 2008 so I have all the disks.
I did look on the Library/Application Application Support/Logic/Plug-in Settings and there are 26 files listed and I recognize quite a few that i have been using that seem to work OK. But somtimes, as you know you can click on say, EFM1 but then by clicking on that, you have to choose another on of the option effects such as 07 Warped FM and then to Aqua Enchant befoer you can be finished selecting what you need. This is where I run into the lost content. Actually I have a book I' learning from called Logic Pro 8 Beyond the Basics and it hands on exercises to do, the books written well, and I'mn dong well with it, but if you have a major question you must ask, thats when I need help otherwise you can't proceed further.
But back to to The File incons Library/Application Application Support/Logic/Plug-in Setting yes, I do sse the 26 File Folders and the folder icon is Blue which looks correct, however, when I try to open those files, there appears to be no content inside of them. I'm not saying this is abnormal as I dont' really know, I'm just reporting back. So does this mean that the files are in fact missing content?
By the way, some of the plug in settngs in the Library work fine and those files show up as "blue" color but LIbray always lets me know when the files show a white "Zero." in the file.icon.

How to override the create method invoked by a create form?

Hello everyone, I'm using ADF Faces and have the next question:
How can I override the create method which is invoked by a create form to preset an attribute in the new row (the preset value is not fixed, I have to send it to the method as a parameter as it is obtained using an EL expression)?
In the ADF guide I read how to override a declarative method (Section 17.5.1 How to override a declarative method), but this explains how to do it with a method that is called by a button. I don't know how to do the same with a method which is called automatically when the page is loaded.
I also tried overriding the view object's createRow() method to receive a parameter with the preset values but it didn't work, I believe that was because the declarative create method is not the same as the view object's createRow. This caused the form to display another row from the viewobject and not the newly created one (I also set the new row into STATUS_INITIALIZED after setting the attribute).
Well, I hope my problem is clear enough for somebody to help me.
Thank you!

Hello,
I'm not sure you can do it with standard generated Create Form.
In your view object you'll need to create your own create method with parameters, publish it to client interface and invoke instead of standard generated create action in page definition.
Rado

How to allocate the processes to various drives?

I am ready to render my movie project come hell or high water!
Could you please descirbe specifically which processes you would allocate to which drives on a quad core PC during the rendering process & what names you would give them.
I have a brand new laptop :- well I was going to paste my PC specs here but this window won't allow cut/copy/paste!!!! yet another totally frustrating aspect to this supposedly layman's software!
So from that little outburst you can tell I am at my wits end...................I have read these forums until my eyes bled. I am now even more confused & have 40 more questions than I started with & realize I'm supposed to be an expert on more things than many people would know about in a life time just to operate this PrE software.
So now to do the long hand typing..............
Brand new Asus laptop
win7sp1 up to date 64bit,
IntelR i7-2630QM CPU 2GHz Quad core,
1.5Tb hard drive,
16Gb RAM,
3Gb graphocs card running nVidia EForce with 17.3" screen,
drive C:\ OS 202Gb free of 279Gb,
(D:) DATA 394gb free,
(E:) SDATA1 349Gb free,
(F:) SDATA2 349Gb free,
1xUSB3 & 3+ x USB2,
Removable expansion HDD 2Tb Seagagte USB2 (fast but actual speed unknown),
Blue Ray RW+- CD/DVD internal burner,
Paging file 16361Mb on C:\
Trail version Trend Micro Titanium
Photoshop Premiere Elements 9 up to date.
Not being previously aquainted with more than 1 core, I'm not sure which part of the rendering process to allocate to which drive.
The file will be a big one that's for sure. I didn't know that I was supposed to change the default settings of the PrE or that the photos might be too big. These things are not a problem with WMM.
So the movie is as follows:- (again longhand typing... sigh)
movie files are all .avi 640x480 30f/s 88kbps audio
all photos are . jpeg mostly 3264 x 2448 180dpi 1.75Mb
all taken with Cannon PowerShot camera
This project is the first of a set of 3 which will all be17mins long about half & half stills(5sec duration each) & video, with some titles & lots of transitions.
Since I have the whole PC to use to do the rendering & then burn to file, I'm not concerned about what resources get used. I am sick of making changes & just want to get it done to see if it works & if it will fit on a DVD after. I am burning to file because if more than 1 movie will fit on a disk, that is the way I want to set it up.
So other questions relating to this rendering are:-
Can I do it all in one go or do I have to do it in sections,
Should I make a copy of the movie file first incase it doesn't go well,
I know nothing of how to set the defaults, I just want the movie to play on HD TVs using various DVD players & the odd computer all belonging to friends.
Are there generalised presets for wide screen.
I have previously done a test movie using videos & still photos from this same camera & included titles & transitions & then just burnt it without rendering & it turned out well enough except the picture was a bit too big on the TV.

Will reducing the size of the photos still mean they show the best quality on the TV screen?
I did make a test movie using some of the same vids & stills I was going to use in the proper movies. It was my first use of PrE & I used it just like I had been using WMM, then the shocks started because PrE doesn't operate like WMM! However I was happy with that test movie except for the slightly larger than ideal picture with an almost square aspect on the TV even though I had selected a widescreen aspect at the time burning.
Steve the 'properties' doesn't say the vids & stills are MPEG AVI files just .avi. There are also stills & video from another camera that I do have to use in the other 2 movies in the set & they are definitely MPEG with crazy codecs because the camera is a Kodak (apple based). There didn't seem to be any problem with PrE using them or the .avi files or the larger still images all in combo in the 1 test movie. I didn't know about rendering at that stage so I just burnt it to disc.
That's why I just decided to quit stuffing around with this first project & get onto finishing it. I will make a copy of the PrE file as it is now then get onto rendering more as a test to see how it will turn out. If it is all wrong or can't finish I will go back to the copy & modify. But knowing which drives to allocate to which parts of the process is all new to me.
I neglected to mention in my firt post that I have to make PAL movies here in Australia.
The new PC's harddrives are all configured NTFS. My old laptop had an NTFS harddrive. It's the one I used to make the test movie when I first loaded the PrE on it & discovered it wasn't big enough to make movies more than 6-8mins long possibly due to the photos being so big & also because I never rendered it first.
Hunt, I paid a lot for this new laptop PC because I was under the impression it had 4 separate drives rather than 1 drive with 4 partitions. I certainly never wanted partitions. Now after what you have just said, I'm not sure what I have. I'm sure the specs talk about different drives. It certainly pictures 4 separate drives in the sys inf & the PC is said to be quad core which to my understanding in this country should mean 4 physical drives. Also I think somewhere I came across the part numbers or registered numbers for each drive although I can't find that place now.
The drives are MATSHITA BD-MLT UJ240AS DVD/CD-ROM Does that give you any insight to whether there are 4 HDDs or just 1 HDD partitioned?

How to hide the file name (the bizarre number assigned by the camera) when exporting an image version in aperture from an album. Pl understand I want to keep the file name in the project library version.

how to hide the file name (the bizarre number assigned by the camera) when exporting an image version in aperture from an album. Pl understand I want to keep the file name in the project library version.

Within Aperture you have Images, which are constructed on-the-fly from two files (the Master and the Version). You get an image-format file _only_ when you export an Image. You select the file name (usually a scheme) when you create an image-format file (that is, when you export). Look under "Aperture→Presets→File Naming" for built-in Presets. You can, of course, create your own or customize any provided.
The Preset is applied to only the file newly created by your "export" command. It is not applied to the Image in Aperture (unless you rename your Versions or your Masters).

Sending image sequence job to compressor in command line : how to set the framerate?

Hello,
In Compressor, when you import a image sequence, it's possible to set the framerate and add an audio file before choosing a preset and lauching the encoding task.
I want to dlo the same thing with command line. I know how to send a compressor job with command line, but no how to add theses settings.
In the compressor command line help, we've got this :
Job Info: Used when submitting individual source files. Following parameters are repeated to enter multiple job targets in a batch
          -jobpath <url> -- url to source file.
                                           -- In case of Image Sequence, URL should be a file URL pointing to directory with image sequence.
                                           -- Additional parameters may be specified to set frameRate (e.g. frameRate=29.97) and audio file (e.g. audio=/usr/me/myaudiofile.mov).
So there are also framerate and audio parameters in command line but i've no idea how to write the command line with theses parameters
Here is an example of command line for Compressor (by Apple) :
./Compressor ‑clusterid tcp://127.0.0.1:51737 ‑batchname myBatch ‑jobpath /Volumes/Source/ShortClips/NTSC24p.mov ‑settingpath /Users/stomper10/Library/Application\ Support/Compressor/PhotoJPEG.setting ‑destinationpath /Users/machinename/Movies/myDestinationFilename.mov.
Thank you for your help!

You can see in the command sh running-config command
show running-config : Displays the current access point operating configuration
Use the guest-mode SSID configuration mode command to configure the radio interface (for the specified SSID) to support guest mode. Use the no form of the command to disable the guest mode.
[no] guest-mode .
Here is the guideline for usage
The access point can have one guest-mode SSID or none at all. The guest-mode SSID is used in beacon frames and response frames to probe requests that specify the empty or wildcard SSID. If no guest-mode SSID exists, the beacon contains no SSID and probe requests with the wildcard SSID are ignored. Disabling the guest mode makes the networks slightly more secure. Enabling the guest mode helps clients that passively scan (do not transmit) associate with the access point. It also allows clients configured without a SSID to associate.
Examples
This example shows how to set the wireless LAN for the specified SSID into guest mode:
AP(config-if-ssid)# guest-mode
This example shows how to reset the guest-mode parameter to default values:
AP(config-if-ssid)# no guest-mode

Same shooting, multiple lenses, how to apply the appropriate lens correction when importing ?

Hello everyone,
How do you handle this:
For each camera, i have a default preset i'm choosing manualy and applying when importing my raw files into lightroom.
I'd like to also add some default lens correction to those presets.
The problem is that multiples lenses (meaning different corrections) may be applied.
How to apply the correct lens correction for each file, in the batch import ?
Thanks for your ideas ...
Aymeric

Update your existing develop presets so that the Lens Corrections are checked (see attached screen shot). Select the develop preset in Import dialog. Lr will automatically apply the appropriate default lens profile to each individual image during import.

ERROR ITMS-3000 | How to correct the file_name ?

Hi,
i wanted to update an already in-sale app for the chinese market with chinese file name.
Its an integrated single edition app, already worked up until iOS 7 flawlessly.
Now after repacking the .ipa and .zip via DPS App Builder 3.2.1, checking and uploading i got the following error:
How can i correct the invalid file name?
---- Update #1
The Support suggested the usual "rework all your certificates and repack your app" and then told me to delete the app from iTunes Connect completly.
For an App already in sale since 2 years not an option, obviously .
So now, they are tying to upload the app from their end to iTunes.
---- Update #2
The support handled the upload of our app on their end without problems, but couldn't tell me the reason or how to address the problem ahead in production.
How the error really occured or what we can do on our side is not yet solved.

Within Aperture you have Images, which are constructed on-the-fly from two files (the Master and the Version). You get an image-format file _only_ when you export an Image. You select the file name (usually a scheme) when you create an image-format file (that is, when you export). Look under "Aperture→Presets→File Naming" for built-in Presets. You can, of course, create your own or customize any provided.
The Preset is applied to only the file newly created by your "export" command. It is not applied to the Image in Aperture (unless you rename your Versions or your Masters).

How to preset the FM Statio

Similar Messages

Maybe you are looking for