How to prevent for a particular org manually created IR/ISO should not be considered for Constrained EDD plans

We have a situation that around IRs with ~500 parts which manually created in Org A and ISO Created in Org B and ISO picked as well. But due to some reasons, shipment will get delay for 1 month and till that time plan should not be considered this IR' as supply in Org A.
Currently our Constrained EDD plan is considering this IR quantities as supply for the Org A demands and not generating any Planned orders. Seems we don't option to firm IRs by changing the need by date after 1 month. Also its not respect the need by date of IR and its getting reschedule in action and pegged to the current Demand in Org A. Please advise if you have any thoughts.

Similar Messages

How to prevent the Canon 6D to climb to higher ISOs when it works in automatic mode?

How to prevent the canon from 6D climbing to higher ISOs when it works in automatic mode?
I was shooting at a basketball game at ground level and I left it in automatic mode because the moves were too fast, but when I passed to Lightroom, the photos were grainy, due to high ISO.

Under the settings menu (third menu over), select ISO settings, and then set the Auto ISO limits for max to whatever you consider the maximum acceptable ISO.

Pharma: shelf life with remaining 4 months should not be considered for planning

Hi,
Implementation in Pharma : FG Shelf life with remaining 4 months should not be considered for FG planning.
How to exclude this stock while planning for FG. FG planning is Make to stock.
BR
Subbu.

Hi,
Thanks to Caetano, Kumar & Mani..
We have achieved this with below with customized program....
Exclude those batches from MRP run whose difference between the (expiration date &
current date ) is less than or equal to its procurement time mention in MRP-2
view of material master.
Before running MRP, one need to execute the program with following option:
Input data will be plant, material type or list of material:
   System should execute following logic:
1) In a plant list all material with given material type
2) Execute the BAPI for find out the characteristic value of EXB_MRP from class
type 001of material class (BAPI_OBJCL_GETDETAIL_KEY)
3) If EXB_MRP = Y , then list out all such material.
4) For such a material identity those batches which are available in stock other
than ‘9999’
5) All such batches characteristic of shelf life expiry date need to be derived
from BAPI
6) Calculate ( Expiry Date - Today’s Date)
= Difference
PLIFZ ), batch of
the material will be transferred to the 9999 storage location which will be
excluded from MRP run.
PLIFZ ), batch of the material will be transferred
to the 9999 storage location which will be excluded from MRP run.
   7) Run the MRP on materials
   8) Transfer posting from 9999 storage location to original storage location :
Selection criteria
   On execution transfer the material back to required storage location.
BR
Subbu.

How enter the values in to table when create entries option is not working

hi everyone,
can u please tell me How enter the values in to table when create entries option is not working.
it's urgent.
thanking u all

Hi Shree,
how many entries u want to insert ,,
is it a ztable or custom table ..
just tell me ur clear requirement ..
clarify the same ..
if no options avaliable then if its less entries or some value u can do it through debugging ..
if its bulk entries then u can write a program ..
just let me know ..
regards,
VIjay

RESERVED QUANTITY'S SHOULD NOT BE CONSIDERED FOR TRANSFER POSTINGS

Dear Gurus,
Reserved quantity's should not be considered for Transfer postings to subcontractor or Stock transfers.
Example: Material XYZ Total Stock = 1200 nos.

as per standard SAP reservation quantity will not stop the goods issue. resevation has no control on stock issue.
Try with abap development.

RESERVATION QUANTITY SHOULD NOT BE CONSIDERED FOR TRANSFER POSTINGS

Dear Gurus,
Reservation Quantity should not be considered for Stock Transfers or Transfer postings to Sub contractor.
movement type : 541 & 641
Example : Total Stock = 1200 nos. Reserved stock for production order = 1000 nos.
Currently our system allows stock transfers/transfer postings for reserved quantity also.
But we want the reserved quantity to be blocked and only free stock should be allowed for transfer postings.
(i.e 1200 - 1000 = 200 nos . Only 200 nos should be allowed for transfer postings)
Please suggest.

as per standard SAP reservation quantity will not stop the goods issue. resevation has no control on stock issue.
Try with abap development.

How to prevent SAP to copy a manually typed Item text from PO into Info rec

Hi SAP gurus
Could you guide me the configuration to prevent SAP to copy a manually typed Item text from PO into Info record PO text,
Thanks
Katta

Charlie,
I'm having trouble with copying text from Info Record to RFD.
When in Spro I put the fix indicator at <*> or <N>, the the system does what it should.
But when I put the fix indicator at < > blank, then no text is copied.
Is this normal behaviour ?
regards,
Francois

How To Use Dynamic Menus To Place Manually Created Jspx Pages On Sub-Level

JHeadstarters,
Back on the JHS trail and could use some help.
I started using dynamic menus (see section 9.2 JHS Dev Guide) to setup a custom menu structure and found it could not be easier however I need to solve 2 issues;
1. How to get more than 2 levels deep on the menus (parent, child, grand-child, etc.)? In the menu structure setup I have created a menu that is 3-levels deep however when it runs you only get 2 levels. Perhaps a template needs to be changed.
2. How can I assign manually created jspx pages to sub-level menus?
Scenerio;
I have JHS generated pages *** AND *** manually created pages. Using dynamic menus to place the JHS genned pages works fine, the problem is how to do it with manually created pages.
Using Dynamic Menu's I created a top-level menu tab named "warp-core", below it on the next level I have two sub-menus, one named "search" and one named "form" for displaying the results of the search and modifying the rows (don't ask me why they are seperate).
The problem is how to assign the manually created jspx pages to those sub-menus? Or am I going abouth this the wrong way? Perhaps I could use JHS to generate seperate search and display pages.
Thanks!
BG...

Bill,
1. Yes, you need to decide yourself how and where you want to render this third level menu. You then create a region file similar to dynamicMenu2Tabs.jspx, just replace the references to level2MenuItems with level3MenuItems. Then create a custom template to call this menu 3 region file.
For example, you could create a bulleted vertical list for level 3 as illustrated in section 9.1.3 of the Developers Guide (that example is with static menu, but you can use similar technique for dynamic menu)
2. Instead of a group name, you can specify a JSF Navigation action in the menu administration application. So, you create a global navigation case to your custom page, and you enter this navigation case id in the menu admin app.
Note that if you want to generate separate search pages, you can do so by setting the advanced search property to "separatePage".
Steven Davelaar,
JHeadstart Team.

How can I know if a manually created Journal Entries has not been paid yet?

Hi There.
I'm passing through the following situation: I need to find out which Journal Entries that have been manually created ( TransType = 30 ) don't have an Outgoing Payment record associated
Lets suppose that I manually created a Journal Entry. Let's call it OJDT_MAN
Then, I went to the Outgoing Payments Form ( Modules -> Banking -> Outgoing Payments -> Outgoing Payments ) and paid OJDT_MAN.
This process will create another Journal Entry. Let's call it OJDT_AUTO.
I can't find in the database anything that indicates that OJDT_MAN has already been paid. I tried looking for a Status field; Checking if OJDT_AUTO had some code that could get me to OJDT_MAN ( I found BaseRef and TransType = 46, that can guide me to the new OVPM record ); Tried looking at the new OVPM record for some field that could lead me to OJDT_MAN, but I had no success at all...
So, in resume, and again, how can I know if a manually created Journal Entry hasn't been paid?
(When I go to the Outgoing Payments Form and select a Business Partner, it B1 shows me only the not paid ones... How does he knows it? )

Just to make it more clear, the SQL we were looking for is this:
Select
From
OJDT
Where
OJDT.TransId Not In ( Select VPM2.DocEntry From VPM2 Where VPM2.InvType = 30 )
And
OJDT.TransType = 30

How do I install a mobile addon manually? The xpi will not open in firefox.

The mobile site does not allow me to install XPI files, it downloads them, but I cannot for the life of me get the XPI to open. Also, I cannot search for addons in the preferences, all searches return no results.

If you have the .xpi file in your phone memory, you can just type in Firefox address bar "file://" to browse to the file location, tap on it and wait to be installed.

I need the detail about how to read the data from spreadsheet file. but the file should not created by labview.

i face some difficulties here. the datas are encrypted...... how to get correct data ..........

Excel files are in a propriertary microsoft format. A LabVIEW "spreadsheet" file is a file containing an ASCII table with tabs separating columns and linefeeds separating rows. They are not ther same!
If you use "write to spreadsheet file" and name the file *.xls, this does NOT make it an excel file, it just tells the operating system to open it with excel if you double-click it. Excel is smart enough to notice that it is not really an excel file and does its best to convert it transparently. The same does not work in reverse.
You have several options:
You can use excel to export your data to something LabVIEW can read. Try e.g. tab delimited text.
You can use e.g. activeX to read an excel file, see: http://zone.ni.com/devzone/cda/epd/p/id/3409
Search for excel in your example finder for more possibilites.
LabVIEW Champion . Do more with less code and in less time .

PPDS Heuristic for Constrained/Finite planning

Hello PPDS Experts,
I am trying to setup PPDS Heuristcs for a client to achieve a feasible plan for the following scenario:
1) 7 BOM Levels to be planned in APO
2) PPDS Heuristic run must be constrained by material availability at all levels
3) PPDS Heuristic must run in Finite capacity mode at all BOM Levels
With CTM, we can achieve all this in one go;
With PPDS Heuristic, i think we have to use multiple planning steps to achieve this; I tried the following steps until now;
1) Step 1 -> Determine Low Level codes
2) Step 2 -> Un-Constrained MRP Heuristic
3) Bottom - Up Multi Level heuristic
1) Step 1 -> Determine Low Level codes
2) Step 2 -> Un-Constrained MRP Heuristic
3) Step 3- Stable forward scheduling
1) Step 1 -> Determine Low Level codes
2) Step 2 -> Un-Constrained MRP Heuristic
3) Step 3-> Stable backward scheduling
Even after trying all these approaches, my planning result is still wrong; I want to achieve a feasible plan that is constrained by material at all levels and capacity at all levels.
Is there a general PPDS Heuristic sequence that i have to use to achieve this feasible plan.
thanks
swathi

Hi,
I will suggest to go with following approch
1. Infinite Planning run.
2. Finite planning with find slot backward/forward direction for first level BOM.
3. Run bottom up heuristic to adjust planning accordingly.
This may lead to constraint violation at upper level.
4. Finite planning with find slot i forward direction for next level of BOM. Direction backward is not used so that there will not be problem of material availability.
You can carry on like this for further BOM levels.
Still planning with above steps may not give desirable results as some times larger lot sizes maynot find suitable slots and there can be poor utilisation of resources.
For somewhat better results after first level of planning some manual intervention will be required.
I will like to aske few questions-:
1. Is your rough cut/mid term plan is balanced considering these constraints.
2. What is approximate lead time at each level?
3. What is total lead time.
4. Duration of shortterm planning horizon at each level(PPDS horizon)
5. Purpose of above questions is in case of multilevel planning genrally short term planning as you to higher bom levels depends on inventory already available in stock.
Regards,
Santosh

Updating a table through a manually created tabular form does not work.

Hi Friends,
I don't know why the "On submit - After computations and validations" process does not update the referenced table. May I miss something. Here is my source :
select
apex_item.hidden(1,eqp_id) id,
apex_item.hidden(2,tcs_tcs_id) tcs,
apex_item.text(3,eqp_equip_name,50) name,
apex_item.text(4,eqp_equip_ident,50) ident,
apex_item.text(5,eqp_equip_type,15) type
from equip_physical
where tcs_tcs_id = :P1_TCS_ID
and here is the process source
FORALL i IN 1..apex_application.g_f01.count
UPDATE equip_physical
SET eqp_equip_name=apex_application.g_f03(i),
eqp_equip_ident=apex_application.g_f04(i),
eqp_equip_type=apex_application.g_f05(i)
WHERE eqp_id=apex_application.g_f01(i);
No error message is displayed and my success message associated to the process is displayed. But the modified text field value is erased and the database table is not updated.

I'd call it a bug/missing feature.
It appears that within a Basic report, sorting on a column created using APEX_ITEM.DATE_POPUP2() does not sort by date.
I'd file this with Oracle Support and see what they say.
Include a link to this thread and your workspace login information.
I got something to work by: (probably not what you want.)
using the C004 column directly. (I just added it to the SQL code)
setting the column's attribute "Display As" to "Date Picker"
setting the column's attribute "Number /Date Format" to DD-MM-YYYY
I suspect: since you don't start with p_idx => 1, this column becomes "1" ==> g_f01
MK

How to compare two dates that should not exceed morethan 3 years

hi all,
can you please tell me how to compare two dates( basically dates are string type)
that should not exceed more than 3 years? in JAVASCRIPT
Thanks in Advance.

This is not a JavaScript forum.
[*Google* JavaScript Forum|http://www.google.co.uk/search?q=JavaScript+Forum&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-GB:official&client=firefox-a]
Good luck.

A Sales Document for a Particular Sales Org. should not appear in VF04

Hi SD Gurus,
Please guide me in this scenario.
There is a Sales Document type ZNEW, for which the billing type is ZA.
Requirement: -
1. XXXX Sales Org. wants to bill ZNEW. I mean they create ZA from ZNEW.
2. YYYY Sales Org. doesn't want to bill ZNEW. I mean they DON'T create ZA from ZNEW
2a. They don't want to see ZNEW orders in VF04.
2b. They don't want to exclude ZA from VF04.
Is there any other way in which we can achieve the above requirements ?
My Solution: -
1. Putting a Billing Block for YYYY ZNEW orders only using USER_EXIT. But the problem with this is ZNEW orders still shows up in VF04.
2. Putting a Reason for Rejection for all the line items in YYYY ZNEW orders using USER_EXIT. This time ZNEW won't show up in VF04. As there are some reports running for Reason for Rejection, the report looks big.
3. I tried manually making YYYY ZNEW order complete in VBUK and VBUP. Still it shows up in VF04.
Please let me know if you have any suggestions on this. Your response is really appreciated.

Dear Uday Kumar Narayanappa ,
I think as a consultant you have the say in deciding how the things should be mapped in SAP than the USER.
I dont find any reason other than having the same user id being shared between multiple users (and hence variant cannot be used).
Anyways try this.
Make a Z program copying VF04 .
Give the Tcode which is agreeable for the users.
In that Z program , write a code NOT TO CONSIDER documents of type ZNEW.
Now limit the authorisation of this new program only to those users who doesnt not want to deal with ZNEW.
Hope it helps.
Thanks & Regards,
Hegal K Charles

How to prevent for a particular org manually created IR/ISO should not be considered for Constrained EDD plans

Similar Messages

Maybe you are looking for