How to prevent ID Server from complaining about missing plug-ins?

Hi,
When opening the document which has some plug-in related data in it, InDesign Server gives an error message (to Event Log) :
"The document XXX.indd uses one or more plug-ins which are not currently available on your system."
This can be skipped on desktop InDesign but is there a way to skip this on InDesign Server? It is 64-bit Win InDesign CS6 Server.
BR, Sirpa

Found out that you can do this in your desktop plugin (what writes the persistent data to the document) by setting missing plugin warning level to "IgnoreTags".

Similar Messages

How to open Indd file when it shows: missing plug ins in CS4 - Help.

How can I open this Indd file in my CS4 version? It is stating that I am misisng plug ins then it won't open the file. I'm guessing its probably a CS5 version file... Not sure. How do you tell? Anyway, I can I open this thing?
Worst case - How do I upgrade to CS5? Is possible? I can't find anything to upgrade to from CS4. They make it so hard to find.
Thanks for any insight or help!!
Brian

You can identify the version using the script here: Adobe Forums: [Ann] Identify Your InDesign File
If it is from a later version that CS4, it will need to be exported to .idml for something ath can be opened in CS4, but it likely will not look the same.
As far as I know there are no upgrade from CS4 to CS5 or CS5.5 packages avialble through normal resellers, and I'm not certain that CS4 is even eligible for upgrade discount princing for CS6 any longer.

How to stop gweb server from returning server info in the header

Hello all,
Does anyone know how to prevent the GWEB server from returning the server name in the header? it returns LV_HTTP/1.0 by default. adding "servertokens prod" does not work. Is there something that can be added to one of the cfg files, or does anyone know where this is generated in the gweb server, perhaps its possible to edit or filter it inside of the server?
thanks for any help

NPI_Chris-
I have a few questions about your setup and application to assist you with this issue:
1.    What version of LabVIEW are you using?
2.    What version of National Instruments LabVIEW Internet Toolkit?
3.    What operating system?
4.    Why are you trying to prevent the server from returning the server name in the header? Are you trying to mask the server name (delete it/make it unreadable so the end user can’t see it)? Is this a privacy issue?
5.    Or, Are you trying to do data manipulation with your header and the name is causing a problem?
6.    Please provide me more information on your end use of your application.
Please reply to this thread with this information and we can get you the solution you need for your application.
Regards,
Mike S
NI AE

How to change web server from inbuilt Tomcat to IIS in already configured Cold Fusion 10

how to change web server from inbuilt Tomcat to IIS in already configured Cold Fusion 10

You just need to run the Web Server Configuration Tool to connect ColdFusion to IIS. It can be found in the ColdFusion program group off of the Start menu. Be sure to run it "As Administrator".
-Carl V.

How to prevent a file from stripping?

I'm building vacation for Arch64 but should be the same for 32bit. PKGBUILD looks like this:
# $Id: PKGBUILD,v 1.1 2004/01/21 15:43:15 dale Exp $
# Maintainer: dale <[email protected]>
pkgname=vacation
pkgver=1.2.6.1
pkgrel=1
pkgdesc="an automatic mail-answering program"
depends=(gdbm)
url="http://www.tosn.org/projects/vacation/"
source=(http://www.tosn.org/projects/vacation/files/$pkgname-$pkgver.tar.gz vacation.patch)
build() {
cd $startdir/src/$pkgname
mkdir -p $startdir/pkg/usr/{bin,man/man1}
# keeps binary from building
rm -rf vacation
# fixing the Makefile - not only for arch64
sed -i -e 's: -m486::; s:CFLAGS.*= (.*):CFLAGS += 1:' $startdir/src/$pkgname/Makefile
sed -i -e "s:/usr/bin:$startdir/pkg/usr/bin:g" $startdir/src/$pkgname/Makefile
mv vacation.man vacation.1
make install
These file have been created:
[andyrtr@workstation64 vacation]$ ls -lRA pkg/
pkg/:
insgesamt 0
drwxr-xr-x 4 andyrtr users 96 2006-01-28 09:32 usr
pkg/usr:
insgesamt 0
drwxr-xr-x 2 andyrtr users 96 2006-01-28 09:32 bin
drwxr-xr-x 3 andyrtr users 72 2006-01-28 09:32 man
pkg/usr/bin:
insgesamt 24
-rwxr-xr-x 1 andyrtr users 16864 2006-01-28 09:32 vacation
-rw------- 1 andyrtr users 470 2006-01-28 09:32 vaclook
pkg/usr/man:
insgesamt 0
drwxr-xr-x 2 andyrtr users 48 2006-01-28 09:32 man1
pkg/usr/man/man1:
insgesamt 0
[andyrtr@workstation64 vacation]$
I get this error:
==> Starting build()...
gcc -march=x86-64 -O2 -pipe -Wall -Xlinker -warn-common -D_PATH_VACATION="/var/abs/extra/system/vacation/pkg/usr/bin/vacation" -o vacation vacation.c -lgdbm
install -s -m 755 vacation /var/abs/extra/system/vacation/pkg/usr/bin/vacation
install -s -m 755 vaclook /var/abs/extra/system/vacation/pkg/usr/bin/vaclook
strip: /var/abs/extra/system/vacation/pkg/usr/bin/vaclook: File format not recognized
install: strip fehlgeschlagen
make: *** [install] Fehler 1
==> ERROR: Build Failed. Aborting...
Krusader detects it as a Perl program. Any idea?
AndyRTR

Posted: Sat Jan 28, 2006 8:45 am Post subject: How to prevent a file from stripping?
I'm building vacation for Arch64 but should be the same for 32bit. PKGBUILD looks like this:
Code:
# $Id: PKGBUILD,v 1.1 2004/01/21 15:43:15 dale Exp $
# Maintainer: dale <[email protected]>
pkgname=vacation
pkgver=1.2.6.1
pkgrel=1
pkgdesc="an automatic mail-answering program"
depends=(gdbm)
url="http://www.tosn.org/projects/vacation/"
source=(http://www.tosn.org/projects/vacation/files/$pkgname-$pkgver.tar.gz vacation.patch)
build() {
cd $startdir/src/$pkgname
mkdir -p $startdir/pkg/usr/{bin,man/man1}
# keeps binary from building
rm -rf vacation
# fixing the Makefile - not only for arch64
sed -i -e 's: -m486::; s:CFLAGS.*= (.*):CFLAGS += 1:' $startdir/src/$pkgname/Makefile
sed -i -e "s:/usr/bin:$startdir/pkg/usr/bin:g" $startdir/src/$pkgname/Makefile
mv vacation.man vacation.1
make install
These file have been created:
Code:
[andyrtr@workstation64 vacation]$ ls -lRA pkg/
pkg/:
insgesamt 0
drwxr-xr-x 4 andyrtr users 96 2006-01-28 09:32 usr
pkg/usr:
insgesamt 0
drwxr-xr-x 2 andyrtr users 96 2006-01-28 09:32 bin
drwxr-xr-x 3 andyrtr users 72 2006-01-28 09:32 man
pkg/usr/bin:
insgesamt 24
-rwxr-xr-x 1 andyrtr users 16864 2006-01-28 09:32 vacation
-rw------- 1 andyrtr users 470 2006-01-28 09:32 vaclook
pkg/usr/man:
insgesamt 0
drwxr-xr-x 2 andyrtr users 48 2006-01-28 09:32 man1
pkg/usr/man/man1:
insgesamt 0
[andyrtr@workstation64 vacation]$
I get this error:
==> Starting build()...
gcc -march=x86-64 -O2 -pipe -Wall -Xlinker -warn-common -D_PATH_VACATION="/var/abs/extra/system/vacation/pkg/usr/bin/vacation" -o vacation vacation.c -lgdbm
install -s -m 755 vacation /var/abs/extra/system/vacation/pkg/usr/bin/vacation
install -s -m 755 vaclook /var/abs/extra/system/vacation/pkg/usr/bin/vaclook
strip: /var/abs/extra/system/vacation/pkg/usr/bin/vaclook: File format not recognized
install: strip fehlgeschlagen
make: *** [install] Fehler 1
==> ERROR: Build Failed. Aborting...
Looks like its tring to install to /var/abs/extra/system/vacation/pkg/usr/bin....... ????
try make DESTDIR=$startdir/pkg/usr install

How do I stop iPhoto from opening when i plug in my iPhone?

How do I stop Iphoto from opening when I plug in my Iphone?

Having the preference in iPhoto makes perfect sense to me. After all, iPhoto is the application that opens. You would expect that is where you should provide some guidance not to open.
What puzzles me much more is why you would post this comment more than 18 months after wjosten answered the original question.

Can I add my plugin to the "About Adobe Plug-Ins" dialog box?

Hello,
I have created my own Adobe plug-in (.api file), placed it in the plug-ins folder and it's loading and working as expected :-)
However, when I launch Acrobat and navigate to Help > ''About Adobe Plug-Ins", my plug-in is not listed.
Is it possible to have my plug-in listed in the 'About Adobe Plug-Ins' dialog box? Or is this reserved for Adobe certified plug-ins only?
Thanks!

Excellent - good work!
You would be listed in the "About 3rd party plugins" section IF you added an about item from your plugin.

How do I get administrative priveleges to install optional plug-ins for cs5

how do I get administrative priveleges to install optional plug-ins for cs5 and or how to install these optional plugins thanks

To add to Mylenium's reply, here's how to do it on Windows and this is what microsoft website says:
Why do I have to be an administrator to install a program?
Only administrators can make changes that will affect everyone who uses the computer, such as installing software and hardware and changing security settings.
If the program you are trying to install or run says you must have administrator rights, but you are already an administrator on the computer, right-click the installation icon for the program, and then click Run as administrator. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
If the program installs but does not run, right-click the program icon, click Properties, click the Compatibility tab, select the Run this program as an administrator check box, and then try to run the program.

Missing Plug-ins - Package And Preflight.APLN from InDesign Document

If a user creates a file in InDesign CC and then tries to open it in InCopy CS6 they get the following error.
Missing Plug-ins, Cannot Open File
PACKAGE AND PREFLIGHT.APLN
The Doument "filename.indd" uses one or more plug-ins which are not currently available on your system. Do you want to open anyway?
This happens whether the copy of InCopy is on the same PC as InDesign or a seperate PC without InDesign. InCopy is installed seperately from the CC.
Clicking OK opens the file normally.
We have checked that both versions of the software match at v8.0.2.
I've heard it might be due to embedding of this file but the designers say they are not yet at the stage of packaging this file when they get this error so nothing should be embedded.
Can anyone help?
Simon

Hi, Thanks for pointing out the error.
I have checked back with our designer and found out that they are using InDesign CS6 and not CC. (I was confused as they used CC to install it rather than our seperate deployment tool).
The problem however remains the same.

How to prevent the User from loading more than one seq file?

Hi,
I would like to prevent the tester operator from loading more than one test sequence. Any ideas how to do it?
Thanks
Rafi

Hi Marty,
Marty_H wrote:
Hello mhousel,
Testexec.exe by default loads the sequence files that were last open when it runs. It is often desired behavior to have multiple sequence files load automatically.
[Mark Housel] Maybe for some but certainly not for me.
This should be easily handled by TestStand without any problems. What do you mean by "chaos ensues"?
Certainly Teststand doesn't care a bit how many sequences are open. But, when my sequences open they initialize HW of the ATE associated with
that sequence file during the sequenceFileLoad callback. e.g. I allocate TELNET handles to a terminal
server that connects to multiple console within the system and als for
the UUT.
If a second sequence opens it knows nothing about the other sequence and again tries to open a TELENT session to the same port of the
terminal server and obviously fails, so my sequence reports that it
can't properly initialize the ATE HW. Bad juju!
Are your sequence files set to run automatically when they are loaded?
I guess so. Other than the trick of logging in as the special noExecution user and having special code in my sequence and modified Process Model I have no idea how to prevent a sequence fronm "runnin" when opened.
If you want to prevent Testexec.exe from loading multiple files, you should be able to close out one of the open files when it loads and that sequence file should not load in the future. I hope that helps.
The trick I read somewhere else of modifying the Testexec.uir file to never re-load a sequence file automatically seemes to have covered up solved the problem.
Thanks,
Mark

CFmail errors- how to prevent error message from user?

Greetings
I have an app in which the admin user sends notices to Vendors who have signed up to recieve emails when a new bid is posted.
Even though I have "required="yes" validate="email"" at intial Vendor sign up (I think email validation is better served using Javascript, I've heard anyway) inevitably, contact emails go bad- and there are about 5000 vendors in the system.
When a user (admin) sends the notices, if there is a mal-formed or dead email address in the DB, it dislays my default error screen even though the send transaction was successful.
Any advice on how to prevent this?
Thanks in advance for your help
sakonnetweb

<cfset thisBidID = session.bid_ID>
<cfquery name="list_sendto" datasource="#Request.BaseDSN#">
SELECT
lc.contact_fname, lc.contact_lname, lc.contact_email,
b.ReferenceNumber, b.Title, b.Description,
jb.bid_ID, jv.vendor_ID
FROM
((junction_bid_ccc jb
LEFT
JOIN
junction_vendor_ccc jv
ON
jb.cccode_ID = jv.cccategory_ID)
LEFT
JOIN
lookup_contact lc
ON
lc.vendor_new_ID = jv.vendor_ID)
LEFT
JOIN
Bid b
ON
b.new_bid_ID = jb.bid_ID
WHERE
jb.bid_ID = #thisBidID#
AND
lc.contact_email <> ''
AND
lc.contact_email IS NOT NULL
GROUP
BY
lc.vendor_new_ID, lc.contact_email, lc.contact_lname,
lc.contact_fname, b.new_bid_ID, b.ReferenceNumber,
b.Title,
b.Description, jb.bid_ID, jv.vendor_ID
</cfquery>
<cfset thisReferenceNumber = list_sendto.ReferenceNumber>
<cfset thisTitle = list_sendto.Title>
<cfmail query="list_sendto" to="#contact_email#" from="[email protected]"
subject="Bid Notification" server="emailsrv1.cityofnewport.priv"
groupcasesensitive="no">
<p>You are receiving this message because .... etc.

Dev question: how to prevent Adobe Reader from copying pdfs to "Download/Adobe Reader"?

I am making an app that downloads pdf files from a server and the users can decide to store them in the phone. Those files are kept in the app's private storage.
The pdf files can be opened from inside the app. The problem is that every time a pdf is opened, adobe reader copies it in "Download/Adobe Reader" (the path may be different depending on the device and the android version). Those pdf files should not be available from outside my app. How can I prevent adobe reader from creating copies in that folder? Do I really have to make my app track them down and delete them? It wouldn't be the safest solution...
In order to open the files, I se up a content provider:
from the manifest:
<provider
    android:name="android.support.v4.content.FileProvider"
    android:authorities="com.example.myapp.fileprovider"
    android:exported="false"
    android:grantUriPermissions="true" >
    <meta-data
        android:name="android.support.FILE_PROVIDER_PATHS"
        android:resource="@xml/filepaths" />
</provider>
And then, in a method, I do this:
File pdfToRead = new File(pdfPath);
Uri uri = FileProvider.getUriForFile(context, "com.example.myapp.fileprovider", pdfToRead);
for (ResolveInfo resolveInfo : appsList) {
    String packageName = resolveInfo.activityInfo.packageName;
    context.grantUriPermission(packageName, uri, Intent.FLAG_GRANT_READ_URI_PERMISSION);
openPDF(context, uri);
public static final void openPDF(Context context, Uri localUri) {
    Intent i = new Intent(Intent.ACTION_VIEW);
    i.setDataAndType(localUri, PDF_MIME_TYPE);
    context.startActivity(i);
Thanks for the help.

Meh, I just hoped there was a way to tell acrobat "don't create a copy of the file because it's private". For now, I'm detecting the "downloads/Adobe Reader" folder, look if there's the file that was opened and delete it.
Now I need to know something that I can't ask on stackoverflow: what paths does Adobe Reader use to create the "Adobe Reader" folder? Because not every device has an external sd card (external, not removable. Just for clarity). In my device it's at "Environment.getExternalStoragePublicDirectory(Environment.DIRECTORY_DOWNLOADS)+"/Adobe Reader".

How to prevent my slide from advancing?

Hi - how do I prevent my slide from advancing? I have a text caption at the top, then 2 images, each with click boxes over them. And then there are 2 text captions below - one underneath each image. I also added a next button to try to stop the slide from advancing.
I set the action on each click box to show the text caption below the image when the click box is clicked. So here's what happens:
- the slide plays, then stops
- user clicks either one of the images (is actually clicking the click box on top of the image), and
- then the slide start playing again and then eventually all the objects disappear (timing on the slide is about 17 seconds).
How do I get all the objects to just stay on the slide, until the user clicks the next button on the skin? I had thought the Next button would do that, but it's not (and I don't want a next button on there anyway).
Thanks!
Kelly

Hi Kelly
It's all in the timing.
Can you share your project? If we can see it first hand, we can then offer suggestions about what you need to do.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

How to prevent multiple users from updating the same data in coherence

Hi,
I have a Java Web Application and for data cache am using coherence 3.5. The same data maybe shared by multiple users which maybe in hundreds. Now how do I prevent multiple users from updating the same data in coherence i.e. is there something in coherence that will only allow one user a time to update. If one user is in a process of updating a data in coherence and some other user also tries to update then the second user should get an error.
Thanks

I have a question on the same line. How can I restrict someone from updating a cache value when I a process is already working on it. I tried locking the cache key but it does not stop other process to update it , it only does not allow other process to get lock on it.

How to prevent a user from entering characters into a number field

How do you prevent a user from entering characters like A or B into a field that is defined as a numeric field?
Please note that
- we use block validation (for other reasons)
- we are not able to convert these numeric fields to character fields
We want to avoid a user being hasseled with the FRM-40209 ... message.
This message is
- not very helpfull because it does not inform us what the problem field is
- not suppressable
Any hints ?

I went back to the drawing board on this one.
You are absolutely right : the message can be catched !
By writing an on-error trigger you can check for the error number. Sadly enough my first attempt on this used the on-message trigger which never fired hence my desperation.
Anyway, the on-error trigger in combination with :SYSTEM.CURRENT_ITEM or :SYSTEM.TRIGGER_ITEM enables me to display a more meaningfull message to my users.
Thanks for the hint.

How to prevent ID Server from complaining about missing plug-ins?

Similar Messages

Maybe you are looking for