How to prevent LV "New Open Help Config" panel displaying during TS?

what is the easiest way to prevent LV "New Open Help Config" panel displaying or being visible during TS execution?

Hi Stephen,
The first option you could look at is just to use the LabVIEW Run-Time Engine instead of the Development System as your LabVIEW adapter (Configure >> Adapters). This will not show the Getting Started window that pops open when you run a sequence that contains LabVIEW action steps.
The other option that you could look into is the window activation properties for each step found by right-clicking a step and selecting properties. Then select the Run Options tab and mess with the TestStand Activation Window drop down menu.
Hope this helps!
Best Regards,
Jonathan N.
National Instruments

Similar Messages

How to dynamically add new components in a panel when a button is clicked

Hi,
I am building a gui which is used to create a new database schema, the panel now contains 6 entries and if i want to include more fields i press add more field button, how to write the event handler for the button which adds more fields. please help
thank you.
Edited by: rahul_ram on Sep 30, 2009 10:59 PM
Edited by: rahul_ram on Sep 30, 2009 11:02 PM

To get better help sooner, post a [_SSCCE_|http://mindprod.com/jgloss/sscce.html] that clearly demonstrates your problem.
Use code tags to post codes -- [code]CODE[/code] will display asCODEOr click the CODE button and paste your code between the {code} tags that appear.
db

How noisy/quiet is new iMac with Retina 5K display?

How noisy/quiet is new 5K iMac compared to the standard display versions? I returned three 27" iMacs (3.5GHz Quad-core Intel Core i7) back in May because they were too noisy for me. Is this 5K machine any different?

imac 5k sadly has a very active fan, especially in the combination of i7 and the amd r9 m295x gpu (4gb).
check the forums (wow, cod etc.) where many people are currently complaining and returning their mac (me as well considering it).. while gaming the fan speed is at 2700 rpm which is around 38 db (very loud!) and the gpu is 105C (not fahrenheit!).
all processor (cpu) intensive tasks like handbrake, rendering etc. will make the i7 go warm and the fan go loud.
all graphics (gpu) intensive tasks like any game will make the amd m295x go hot and the fan go very loud.
regular surfing, photoshop etc. is not affected!
in normal mode, it's always at 1200 rpm where it is not audible to me.
if you want it as quiet as possible go with the i5 and the cheaper graphics card (290x).
just be aware that this is the loudest imac or even mac ever (louder than current mac pro) and I'm not sure if constant heat (105C) is affecting life expectancy and I've been having them since 1991.

How to prevent a new tab from openning

When I open the FireFox web browser which is set to go to my Home Page a "New Tab" page opens that covers my Home Page. This "New Tab" also appears EVERY time I go to a web-site. This "New Tab" covers up the web-site and I have to close the "New Tab" to view the web-site page.
How do I stop this? I dont want this type of "help"

Hmm, sounds like an add-on. Here is my suggested procedure for finding and removing bad add-ons. This is based on the unfortunate fact that many bad add-ons arrive as part of a free software download rather than something you installed intentionally from the add-ons site.
(1) Open the Windows '''Control Panel''', Uninstall a Program. After the list loads, click the "Installed on" column heading to group the infections, I mean, additions, by date. This can help in smoking out undisclosed bundle items that snuck in with some software you agreed to install. Take out as much trash as possible here.
(2) Open Firefox's '''Add-ons page''' using either:
* Ctrl+Shift+a
* "3-bar" menu button (or Tools menu) > Add-ons
In the left column, click '''Plugins'''. Set nonessential and unrecognized plugins to "Never Activate".
In the left column, click '''Extensions'''. Then, if in doubt, disable (or Remove, if possible) unrecognized and unwanted extensions.
Often a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
Any improvement?
(3) You can search for remaining issues with the '''scanning/cleaning tools''' listed in our support article: [[Troubleshoot Firefox issues caused by malware]]. These on-demand scanners are free and take considerable time to run. If they finish quickly and especially if they require payment, you may have a serious infection. I suggest the specialized forums listed in the article in that case.

How to program TestStand to open a Config VI always when a new step is inserted?

I created a step type and packed it within a custom type palette (".ini" file). The code Module for this Step is a LabVIEW Express VI.
Using the "Step Type Menu Editor" I included this new step within the "Insert Step>>"
Menu.
Question: How to Program TestStand or the step type, so that by the insertion of this new step within the
sequence the configuration dialog box of the express VI automatically pops up? (this would be like using
the option "Configure VI..." within the step context menu)
I would appreciate a lot all the help about this issue!
Thanks!
- Caribe -

Caribe,
I. In order to accomplish this you need to insert a custom substep in your step type.
    1. Go to your step types properties and select the substeps tab.
    2. Select the ActiveX/COM Adapter from the Adapter list.
    3. Add a new custom substep.
    4. Rename it -> OnNewStep
    5. Specify the Module.
    6. Object Reference = Step.
    6. Object Class = Step.
    7. Call the Method -> EditCode.
Now every time you insert your step, this substep will be executed and as a result you will get the Express VI configuration dialog.
Best Regards.
Rename the
Message Edited by Antonio Lie (NI) on 08-23-2005 01:30 PM
Message Edited by Antonio Lie (NI) on 08-23-2005 01:33 PM

How to prevent IE9 new tab loading default homepage?

I configured IE9 default home with domain GPO to enforce default homepage on all PCs. However, a default homepage is loaded whenever my users click on 'New Tab' next to homepage tab, the default homepage is loading. Is there a way to open a 'Blank Page
or Bing' when users click on 'new tab'? Thanks.
Thang Mo
I figured it out in IE 9 General tab setting, now please help me how to set it in GPO, thanks.

Hi,
Thanks for your feedback and sharing your
solutions and experience here. It will be very beneficial for other community members who have similar questions.
Karen Hu
TechNet Community Support

How to prevent iTunes to open when my device is connected

Hi,
I'm using iTunes 10.0.1.22 on Windows Vista OS.
Each time i connect my iPhone to the computer, the iTunes opens. i don't want it to happen. not to open and not to sync.
There's is NO tick in iTunes > Device > Summary > Options > Open iTunes when this iPhone is connected. but this line is colored in grey and i cannot tick / untick it. Here's a link for a screenshot:
http://img2.timg.co.il/forums/1_146522632.jpg
The iTunes perfernces is tick for "prevent iphones from syncing automatically".
I also tried to re-install the iTunes software. no luck.
what can i do?

I actually had this same question for my iPad. My wife's computer is really slow, and I was hoping it might be a little faster to get iTunes to open if it was set to open as soon as she connects her iPad. All of a sudden that option was grayed out. Thank you for your help...
Sly

How to center a new- opened window page?

let's say i have 2 jsp files. i have a hyperlink in page 1, if i click that hyperlink, a pop up window will appear, how will i let that pop up window appear in center?
thanks

you can do it by javascript...
function centerWindow() {
    if (document.all)
        var xMax = screen.width, yMax = screen.height;
    else
        if (document.layers)
            var xMax = window.outerWidth, yMax = window.outerHeight;
        else
            var xMax = 640, yMax=480;
    var xOffset = (xMax - 200)/2, yOffset = (yMax - 200)/2;
    window.open('page.html','windowname',
    'width=200,height=200,screenX='+xOffset+',screenY='+yOffset+',
    top='+yOffset+',left='+xOffset+'');

How to prevent a new record sequence number to be created for a period of 14 days

ALTER proc [dbo].[spCreateSequenceContainerFill]
(@containerID as nvarchar(64),
@lotNum as bigint,
@customerID as int = 1164,
@productID as int,
@fillDateTime as datetime
as
BEGIN
declare @checkcontainerID as bigint
DECLARE @ID int;
set nocount on
SELECT @checkcontainerID = CONVERT(bigint, SUBSTRING(@containerID, 1, 6)) FROM ContainerFillHistory WHERE containerID = @containerID
IF (@checkcontainerID is null)
SELECT @ID = COALESCE((SELECT MAX(ID) + 1 FROM ContainerFillHistory), 1)
ELSE
SELECT @ID = Max(ID) FROM ContainerFillHistory WHERE containerID = @containerID AND @fillDateTime >= DATEADD(DAY, 14, CAST(fillDateTime as DATETIME))
IF (@ID is not null)
SET @ID = @ID + 1
INSERT INTO ContainerFillHistory(ID, containerID, lotID, customerID, productID, fillDateTime, purchorderNum)
VALUES(@ID, @containerID, @lotNum, @customerID, @productID, @fillDateTime, null)
END
If there is a no record with an ID then a new record is created and inserted in the table. After 14 days it is OK to add another record with that ID and bump up the sequence number of the total records in the table. Handling the non existing
case the first time is OK, but the restriction of 14 days if a new record is trying to be inserted has to be ignored.
So far I have this TSQL code.

Please try the following and tweak accordingly.
ALTER proc [dbo].[spCreateSequenceContainerFill]
(@containerID as nvarchar(64),
@lotNum as bigint,
@customerID as int = 1164,
@productID as int,
@fillDateTime as datetime
AS
BEGIN
SET NOCOUNT ON;
DECLARE @ID int;
IF EXISTS (select * FROM ContainerFillHistory WHERE containerID = @containerID)
BEGIN
SELECT @fillDateTime = DATEADD(DAY, -14, @fillDateTime)
IF EXISTS ( SELECT *
FROM ContainerFillHistory
WHERE containerID = @containerID
AND CAST(fillDateTime as DATETIME) > @fillDateTime --AND @fillDateTime >= DATEADD(DAY, 14, CAST(fillDateTime as DATETIME))
BEGIN
RETURN; --//14 Days condition not met
END
ELSE
BEGIN
SELECT @ID = Max(ID) FROM ContainerFillHistory
WHERE containerID = @containerID
AND CAST(fillDateTime as DATETIME) <= @fillDateTime
END
END
ELSE
BEGIN
SELECT @ID = MAX(ID) FROM ContainerFillHistory ;
END
IF @ID IS NULL
BEGIN
SET @ID = 1 ;
END
ELSE
BEGIN
SET @ID = @ID + 1 ;
END
INSERT INTO ContainerFillHistory(ID, containerID, lotID, customerID, productID, fillDateTime, purchorderNum)
VALUES(@ID, @containerID, @lotNum, @customerID, @productID, @fillDateTime, null) ;
END

HT4946 what is the back up passcode its not my ipod i swapped it with my friend and i need to know how to get an new one :( help me please!!!!

hello? anybody an you help me!!!???

There is no backdoor passcode. If there was then the passcode would be poor security feature.
Yu have to connect the iPod to its syncing computer and restore via iTunes.
If you connect to a different computer you will have to place the iPod in Recovery mode and then restore via iTunes.
A restore will erase the iPod.

How to create a new file - help please.

hi there
i need to create a new file in my program, i did the following:
/*code--------------------
PrintWriter out = new PrintWriter(new FileOutputStream(new File("c:\\somedirectory\\outputfile.txt")));
out.println("product code:"+productCode);
out.println("product price:"+productPrice);
out.println("product description:"+productDes);
out.flush();
out.close();
the directory c:\somedirectory\ does not exist yet. i was hoping that when the new file is created, so was the directory. when i run it. the program could not find the path with following error message:
c:\somedirectory\outputfile.txt (The system cannot find the path specified)
can anyone of you experts point a rigth solution? thank you.

thanks
so the steps to create a new file in a new directory is as follow:
//create a file object with the directory path
File d = new File("c:\\xx\\");
d.mkdir();
//then create another file object with the path and the file name
File f = new File("c:\\xx\\abc.txt");
is this right?

How can I close all open subVI front panels, without closing my top level VI front panel when all VIs are built into executables?

I'm using the code shown in the sample VI discussed here: http://digital.ni.com/public.nsf/allkb/353A696A3F393D9B86256E8B007A2912
to close all open VIs except my top level VI. My top level VI is actually a separate executable and the sub-VIs are their own executables. All reside under the same project. It works very well if I'm running in LabView but will not work when I build them. I added all the sub-VIs to the Always Include box in my top level VIs properties which did nothing. I also tried adding them to the Startup VIs box. This allowed me to close them all programmatically from the top level VI but it also open all the VIs at once (which was expected and not desired). I think the problem is the executables are not able to see outside their own memory space so the top-level VI never finds any other open front panels to close. Is this correct? Is there another way to go about doing this?
Thanks!

Where do I begin…..
I’m using a “server” to control 4 “client” PCs. My server opens references to 4 VIs on each client then executes them sequentially. So on a normal day, the server will run everything itself and I will have no contact with the clients. But on a several occasions, I’ve needed the ability to walk up to one of the clients and run just one of the 4 VIs.
We are updating from LabView 6.1 to 8.5 and we want to run executables rather than VIs for various reasons. I have a new VI running on the client PCs who’s only function is to initialize the shared variables and open/close the VIs. I initially thought of making the remaining 4 VIs sub-VIs but I will loose the ability to run them individually. I think I would also have to rewrite the VI running on the server since the 4 references it originally opened do not exist. I don’t think you can open a reference to a sub-VI on another PC. Can you???
As you can see, this is a huge mess. I’m still pretty new with LabView so any help you can provide would be great.

Tell me how to make Ctrl-B open the bookmarks panel on the left side and NOT open Bing.

For years the Bookmarks panel on the left side would open when I press Ctrl-B. Now it opens Bing. How can I fix this?

Does the sidebar open correctly if you use View > Sidebar?
*Press the F10 key or tap the Alt key to bring up the hidden Menu bar.
There aren't any extensions listed in the System Details List that could cause this, so I'm not sure why this would happen.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Are you sure that you aren't opening a specific bookmark in the sidebar?
Opening in the sidebar is the default for bookmarks that are created via a link or button on a website.<br />
You can check the properties of a bookmark via the right-click context menu in the sidebar (Ctrl+B; Command+B on Mac).<br />
In the Bookmarks Manager (Bookmarks > Show All Bookmarks) you can click the More button in the Details pane at the bottom right.
Make sure that "Load this bookmark in the sidebar" is not selected.

How can the number of the contact can be displayed during calling or receiving a call I mean the number of the contact who's calling ?

I need to see the contact number who's calling me not only his name

Unfortunately, your "need" is not supported in iOS.
** Make use of "labels" in order to differentiate between the numbers of the same contact.

Definition of new search help in report RFBILA00

Hello,
I have created a new search help which I would like to include in the selection screen of the report RFBILA00.
Does anyone know how to include a new search help in this report which can be used in the screen "Dynamic selections"?
Best regards
Peter

Try by extending collective search helps - like SAKO for SKA1-SAKNR - by appending your custom search help.
Then I think when you select GL Account description in chart or accounts it will call your custom search help inside it.

How to prevent LV "New Open Help Config" panel displaying during TS?

Similar Messages

Maybe you are looking for