How to print  both normal and bold data in a single line

Hi ,
I have requirement wherin the data need to be displayed in a single line.
FAX:              Z8525_text.
where FAX needs to be in bold and Z8525_text is a standard text and it shoould not be bold , both of this needs to be displayed in
a single line.
Can you let me know how to print  both normal and bold data in a single line one of which is coming fro standard text.
Regards,
Senthil

Hi Senthil,
If you are using smartforms, have a character format created for BOLD and apply it to the text you want to highlight. The remaining text of the line could be applied with a Character format which is not highlighted.
Try and revert in case you need further assistance

Similar Messages

  • How to print both letter and legal size docs at same time with two trays

    I have an HP Laser Jet P2055dn printer. How can I print both letter and legal docs at same time?

    Not quite sure what you mean by "print both letter and legal docs at same time".
    If you mean that sometimes you want to print a document on Letter size paper, and at other times you want to print a different document on Legal sized paper, then all that is neccessary is to ensure that:
    The printer knows what Paper Size (e.g. Letter or Legal) is present in each tray; on many LaserJet devices, the size is detected automaticaly by sensors in each tray (except for the drop-down tray), but some devices may require that you set the size via front panel menus, or (for network models) via the Embedded Web Server equivalent.
    You may also need to specify what Paper Type (e.g. Plain or Letterhead) is present in each tray, in order to distinguish between two or more trays which have the same paper size loaded.
    Within your appllcation / print preferences, ensure that you select the required combination of size and type for the document.
    But if you mean how do you print a document with some pages on one size of paper, and other pages on a different size, this may only be possible with bespoke applications and/or printer drivers.

  • How to change both start and end dates for an business event (or any object

    Hi all.
    We are in the case to change the validity dates for several business events in training management.
    The special point is that both, start and end date, have to be changed.
    In example, business event 00000001 is valid from 2010.01.01 to 2010.01.31 and shoud be "moved" from 2010.05.01 to 2010.05.31.
    So if i run RHBEGDA0 report to change start date first, it doesn't work propperly because new start date is bigger than old enddate.
    Next thing we thought is to change end date first, using RHGRENZ1, and then change the start date, with the report RHBEGDA0. Problem with this solution is that a business event duration shoud be calculated taking care of free days (weekends and day ofs).
    Is there any better solution for this?
    Thanks in advance for your help.
    Best regards.

    Hi,
    I gueass the best solution is to use PV1A t-code.
    You can write an LSMW for this t-code if the number of business events to be maintained is huge.
    Regards,
    Dilek

  • How to combine both ITEM and SCL data

    Hi all,
    I am working in Purchasing.I am having requirement to use both 2LIS_02_ITM which is Item level and 2LIS_02_SCL which is Schedule Line level.
    I created a ODS which includes both the data sources (2LIS_02_ITM & 2LIS_02_SCL) but whenever I am load data to the ODS from both of them I am not able to get values for certain Info Objects like Purchasing Document Number (0OI_EBELN), Item Number (0OI_EBELP) but when I load only from 2LIS_02_SCL I am able to get data for the objects.
    If I load from 2LIS_02_ITM also I am not able to find data.
    Can anyone tell me what is the error.
    Thanks in advance....
    regards,
    Mahi

    Hi,
    I will guide you how to find the issue.
    As you have correct data in PSA you can try simulating update from PSA with debugging switched on.
    From RSMO > Details > Data Package > Right click > Simulate update > Here check Debugging on for Transfer rules and Update rules. This will tell whats happening for the record. where is it being filtered.
    As this is coming in correctly you can rule out any issue with extraction.
    Hope this helps.
    Thanks,
    JituK

  • How can I print BOTH legal and letter on my duel tray printer????

    How can I print BOTH legal and letter on my duel tray printer from my mac? on a pc you can choose "print according to pdf size" and the mixed document will print in both legal and letter auto-selecting the printer tray.

    Hello CKAY,
    My old printer does not show 8x10 either.
    In the printing preferences under the Paper/Quality tab, do you see a "Custom" option or button? There should be one in there somewhere in your preferences.
    Click on that and create a custom size of 8 in for the width and 10 in for the length. Be sure to "Name" it 8x10 Photo and click ok.
    Now give it whatever attributes you want under the other tabs and click Apply and OK (or just OK).
    Close out the printer and open it again and the new size you created should show in the list.

  • How to print the Terms and Condition page ine the sap-script

    Hi experts,
                             i got the requirement that how to print the Terms and condition page in the script,i have the three pages, having the same main window, in the last of the main window(all three pages)  i have called the hard coded text(i.e so10 text), but when i am displaying the output  data get printed in the first page but i am getting the second page heading on the top of  the terms and condiions page. In all the three pages i  have the same main window, if i  make change in any window i will affect all the other main  windows.  so please suggest me how i need to go.HOW TO GET GRID OF THE TEXT ON THE TOP OF THE SECOND PAGE OF THE TERMS AND CONDITONS.
    like this i have called in the MAIN WINDOW
    /E : LAST ( IN ALL THREE PAGES)
           INCLUDE ZSD_INVOICE_TERMS TEXT OBJECT TEXT LANGUAGE EN.
    IN THE TCODE SO10
    NEW PAGE TERMS.
    1) TERM MS AND CONDITONS  TEXT.................................................
    FIRST->NEXT, NEXT->NEXT,,   TERMS--->TERMS.

    Hi,
    1. Create a new page by Name : LAST
    2. Identify the text element which will be the last element in the form in the debug mode.
    Mostly Ex: SUM, TOTAL, LAST etc.,
    3. the page linking should be
    First --> Next
    Next --> Next
    4. In the Text element identified in the step 3.
    Write the following code
    /: NEW PAGE  LAST
    /: INCLUDE the standard text created for the terms and conditions in SO10
    Check the syntax for the command but the logic will be the same.
    It should resolve your problem.

  • How to populate both key and text in drop down list in dialog prog screen

    Hi, Can anyone please advice how to display both key and text in the drop down list in dialog prog screen. I tried with below code. keys and texts are getting populated in values table but only text is appearing when click on drop down. need to display both key and text in the drop down. Thanks in advance.
    TABLES: ZRPP_MODELS, ZRPP_FFLSTRATEGY.
    TYPE-POOLS : VRM.
    DATA : field_id TYPE VRM_ID ,
           values   TYPE VRM_VALUES,
           value    LIKE LINE OF values.
    FORM fill_model_list .
      select MODEL MODEL_DESC from ZRPP_MODELS into value.
        APPEND value TO VALUES.
      endselect.
      CALL FUNCTION 'VRM_SET_VALUES'
        EXPORTING
          id     = 'ZRPP_MODELS-MODEL'
          values = values.
    ENDFORM.

    You need to concatenate KEY & VALUES
      wa_values-key = '1'.
      wa_values-text = '1 - One'.
      append wa_values to i_values.
      wa_values-key = '2'.
      wa_values-text = '2 - Two'.
      append wa_values to i_values.
      wa_values-key = '3'.
      wa_values-text = '3 - Three'.
      append wa_values to i_values.
      call function 'VRM_SET_VALUES'
        exporting
          id              = 'LIST_BOX'
          values          = i_values
        exceptions
          id_illegal_name = 1
          others          = 2.
    a®

  • How to Print a text in bold format in a classic report ??

    How to Print a text in bold format in a classic report ??

    hi
    u can use
    <b>FORMAT  INTENSIFIED ON.</b>
    regards
    ravish
    reward if useful

  • My iPhone 5 has broken and is being replaced with a new iPhone tomorrow. However, My carrier (orange) will b picking up my broken iPhone and I am unsure how to secure the content and icloud data on the broken phone. Is there a way to display the data?

    My iPhone 5 has broken and is being replaced with a new iPhone tomorrow. However, My carrier (orange) will b picking up my broken iPhone and I am unsure how to secure the content and icloud data on the broken phone. Is there a way to disable the data held on it and ensure that if it is fixed, nobody can use/see my data and access my account?

    Hi Gazpan,
    Thanks for visiting Apple Support Communities.
    I recommend using the steps in this article to back up your iPhone if possible:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    You may also find this advice helpful for your situation:
    What to do before selling or giving away your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ht5661
    If you no longer have your iOS device
    If you're using iCloud and Find My iPhone on the device, you can erase the device remotely and remove it from your account by signing in to icloud.com/find, selecting the device, and clicking Erase. When the device has been erased, click Remove from Account.
    If you're unable to complete either of the above steps, you should change your Apple ID password. Changing your password won't remove any personal information that is cached on the device, but it will make sure that the new owner can't delete your information from iCloud.
    Cheers,
    Jeremy

  • How to fetch APPROVER NAME  and approval date dynamically for an user

    Hi all..
    How to fetch approver name and approval date dynamicall for an user in an email template..
    can any help me to sort out this pbm,i am new to IDM..
    Thanks in advance..

    Access policies get a static value.  You can't populate a field with an adapter.  If you must do this, leave the field blank, and put an adapter on the process form for your field that must be populated using code or logic.
    -Kevin

  • I forgot my passcode to reset and erase the data . how i have to reset and erase data on my ipad mini

    i forgot my passcode to reset and erase the data . how i have to reset and erase data on my ipad mini

    Do you have a question? Is your iPad disabled?
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • How to Record HTTP Requests and POST data

    Hai all..
    Can anyone help me to solve this issue..
    How to Record HTTP Requests and POST data by using java..
    regards
    Ranjith Nair

    You should read about TCP and splitting data stream into packets and learn how to understand packet header to assemble stream from packets.
    Actually there are few different stages:
    1. detect handshake to start new empty stream within your code;
    2. detect subsequent packets and assemble stream (there are counters within packet header and they will help).
    After creating start of TCP stream (usually 1KB is enough) you'll be able to detect is it HTTP request/header or no and start logging or ignoring packets for this connection.

  • How do I prevent browsing and search data from being forwarded to Google by Mozilla, while still using Mozilla's Firefox as my default browser?

    I do enjoy using Mozilla's Firefox as my default browser, BUT, I don't enjoy the details of my life, to include my Internet activity, to be archived by Google, or anyone else, via Mozilla's/Firefox's sharing of my Internet browsing and/or search engine activity with any aspect or facet of the Google organization. With all of this said, my question is, "How do I prevent browsing and search data from being forwarded to Google by Mozilla, while still using Mozilla's Firefox as my default browser?"

    Firefox's default behavior includes no automatic interaction with Google.
    We do use Google as default search engine and to report web forgery in the 'help' menu, but no data are sent to Google without your knowledge, and you can change your preferred search engine at will.
    However many websites themselves make use of Google Ads which do cause interaction with Google when you load the webpages. This is visible in status bar and happens in any browser. The [https://addons.mozilla.org/en-US/firefox/addon/noscript NoScript] add-on for Firefox can largely save you from this problem.
    If you see things happening otherwise, please reply with details on what you see.

  • HT4305 HOw to delete my diagmostic and usage data on my ipad

    HOw to delete my diagmostic and usage data on my ipad
    <Re-Titled by Host>

    my wife's name and password in the gmail page, how do we delete it

  • Extractor 0HR_PA_OS_1 as both masterdata and transaction data in same load?

    We use the 0HR_PA_OS_1 as an extractor for both masterdata and transaction data.  To reduce the loadingtime  I would like to know if we can populate both the info.object and the Info cube from the same load. Technical it should be no problem, but the infoobject 0HRPOSITION is masterdata in the Info cube using the same extractor, and masterdata should alsways be loaded before transaction data.
    Any advice?
    Tom

    We have daily load process chains to load HR data. And we have following sequence
    Attribute Data Load -> Text Data Load -> Attribute change Run -> Transaction Data Load.
    0HR_PA_OS_1 (for 0HRPOSITION) gets loaded in attribute load local PC, and in Transaction Data Load PC we have DTP that loads from PSA to cube 0PAOS_C01.
    Yes, masterdata should always be loaded before transaction data, this is because of SIDs generation and also if u r using 'Read master Data' in any of transactional transformation mapping, then this 'Read master Data' should happen after master data (0HRPOSITION) is active (after Attribute change Run).

Maybe you are looking for