How to print the the database diagram?

Hello,
I am using Jdev 10.1.3.2.0.
I've created a data diagram for my project, from which we create our datamodel.
Is there a way that we can print the database diagram, a HTML type containing tables, fields, Primary Keys, Foreign Keys, etc.?
The only option I've found so far is publish the diagram as a png.
Thanks in advance,
Regards Leon

Hello John,
I should rephrase that to export.
I'm looking for the type of functionality like creating the Javadoc for UML. Clickable maps which go to the table definitions etc.
Regards Leon

Similar Messages

Can't figure out how to print on the right side of a greeting card using a 5X7 when folded

I have a HP Officejet Pro 8500A. I am trying to print a greeting card, but cannot figure out how to print on the right side of the paper so that it's on the correct side when folded. The paper is 5X7 when folded, 10X7 laid flat.

shgilljx,
Welcome to the forums. I will try to explain this in simple terms, and you'll have to play with it. We'll use plain paper, cut to 10x7. You'll need a marker, 4-5 sheets of paper.
Lay paper flat, number top 1, bottom 2. Flip paper over right to left. number top 3, and bottom 4.Draw a line where the fold would be on each page.1) Put paper with number 3 side up in printer.
To create both templates using MW Office, do this. The requires 2 documents. One is graphic, one is text.
Text template: The text will be printed on number 2. That means your wording must be within the bottom half of the page.
Graphic template: The image must be rotated 180 degrees.The image must be within the top half of the page.
Print the text template. Insert side #3 into the printer. The text should print on side #2.
Print the graphic template: Insert side #1 into the printer. The graphic should print on side #3.
When folded, all should be correct, if I did it right.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

How to print out the position of 2 dimension arrays?

there are 2 dimension arrays, how can print out the position of value than 4?
for example
0 2 3 2 2 2
0 1 1 2 5 3
1 2 3 3 2 1
print out:
The pos is ( 5,2).

Hello
If I understand your question correctly, you are trying to print out the indexes where the value in your matrix is greater than 4
If this is the case, then what you need to use is nested for loops e.g.
for (int i = 0; i< array[0].length; i++)
for (int j = 0; j< array[].length; j++)
int value = array[i][j];
if (value > 4)
System.out.println("The pos is (" + i + "," + j + ")" );
Regarding the syntax I have used to get the size of the array, I am not sure if this is correct, but you should have an idea of what I am doing.
Sajid

How to print from the ipad 2?

Can anyone tell me how I can print from the Ipad 2?

How to print from iPad 2
1. Buy a AirPrint enabled printer; see list below
http://support.apple.com/kb/ht4356
2. Run the CD provided and setup as network printer; this will setup your printer to the same network as your iPad
http://i1224.photobucket.com/albums/ee374/Diavonex/1a30ee42.jpg
3. Start printing from your iPad without wire
http://i1224.photobucket.com/albums/ee374/Diavonex/93ec77e5.jpg

How to print on the photo paper or vise versa

Hey there,
I have HP Photosmart 7510.
sometimes i need to print a photo from my iPhone but the printer is out of photo papers, so how can i change the setting to print the desired photo on the regular paper ?
Also on my mac, from where can i choose to print on photo or regular papers ?
This question was solved.
View Solution.

Hi there,
If you use the HP Home and Biz app: Select your image and then tap the printer options on the bottom of the screen. From here select your printer and near the bottom select your paper type.
Check this post out for setting within OSX.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

How to print all the pages in wad

HI i am having a report with 3000 records when opened in wad, but when we print the Report, it is giving us records(60) on only first page, how do we print all the 3000 records from all the pages by clciking on print only once.
Thank You,
Kris.

i am not able to print any pages after inserting the code, am i placing the code in the right place.
<HTML>

<object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="SET_DATA_PROVIDER"/>
         <param name="NAME" value="DATAPROVIDER_2"/>
         <param name="DATA_PROVIDER_ID" value=""/>
         DATA_PROVIDER:             DATAPROVIDER_2
</object>
<object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="SET_DATA_PROVIDER"/>
         <param name="NAME" value="DATAPROVIDER_1"/>
         <param name="QUERY" value="ZPARAMTEST"/>
         <param name="INFOCUBE" value="ZEMPPRM"/>
         DATA_PROVIDER:             DATAPROVIDER_1
</object>
<object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="SET_PROPERTIES"/>
         <param name="TEMPLATE_ID" value="ZEMPPARM"/>
         TEMPLATE PROPERTIES
</object>
<td>
<table class="SAPBEXBtnStdBorder" cellspacing="0" cellpadding="0" border="0"><tr><td nowrap>
<table border="0" cellpadding="0" cellspacing="1"><tr><td nowrap class="SAPBEXBtnStdIe4">
<A class=SAPBEXBtnStd title="Print via Web Button" href="<SAP_BW_URL cmd="PROCESS_HELP_WINDOW" help_service="ZPRINTING" item="GR1Table">" target=_blank><nobr> Print</nobr> </A>
</td></tr></table>
</td></tr></table>
</td>
<td width="100%"> </td>
</tr></table>
<HEAD>
<META NAME="GENERATOR" Content="Microsoft DHTML Editing Control">
<TITLE>BW Web Application</TITLE>
      <link href="/sap/bw/Mime/BEx/StyleSheets/BWReports.css" type="text/css" rel="stylesheet"/>
</HEAD>
<BODY>
<P><object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="GET_ITEM"/>
         <param name="NAME" value="EMPLOYEE_TABLE"/>
         <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
         <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
         <param name="BLOCK_SIZE" value="5"/>
         ITEM:            EMPLOYEE_TABLE
</object></P>
</BODY>
</HTML>

How to print in the last page of the script..?

Hi,
I am working on a script. I have a header window and one main window. In the main window, I am printing the line items of the Invoice. Once the line items finish, I have to print the sub totals there. and also to print the company agreement details(around 10 lines of text) in the last page of the script.
So, <b>how to print the agreement details in the last page of the script..?</b>
Can anyone provide me a sample code to find the last page of the Script layout..?
And regarding writing the agreement details, is it better to hard code the text or use the standard texts..? which one is better..?
Regards,
Paddu.

HI,
Just create a Standard text, if you are going to use this standard text in other layouts also... and use it otherwise you can hard code it as this its of only 10 lines.
declare one more element in the main window itselft and call it atlast it would print in the last page..
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'FOOTER'<b><- This element should contain the agreement details</b>
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
ELEMENT = 1.
Thanks
Mahesh

How to print out the text for Info record in ME23?

Dear all,
I need to print out a report of PO data. need to print out the text from Info record note (like the picture shown below) in ME23, how should I pull that field and display out?
I need the solution urgently. Hope experts can help.
Thank you very much.
[http://img293.imageshack.us/img293/238/inforecordnd1.png]

Please check below sample code:
PARAMETERS: p_ebeln TYPE ebeln OBLIGATORY.
TYPES: BEGIN OF ty_ekpo,
         ebeln TYPE ebeln,
         ebelp TYPE ebelp,
       END OF ty_ekpo.
DATA: i_ekpo TYPE TABLE OF ty_ekpo,
      wa_ekpo TYPE ty_ekpo.
DATA: l_name TYPE tdobname,
      i_tline TYPE TABLE OF tline,
      wa_tline TYPE tline.
CONSTANTS: c_id   TYPE tdid VALUE 'F02',
           c_object TYPE tdobject VALUE 'EKPO'.
AT SELECTION-SCREEN.
SELECT SINGLE ebeln INTO p_ebeln
         FROM ekko
         WHERE ebeln = p_ebeln.
IF sy-subrc NE 0.
    MESSAGE e001(00) WITH 'Enter valid PO Number'.
ENDIF.
START-OF-SELECTION.
SELECT ebeln ebelp INTO TABLE i_ekpo
         FROM ekpo
         WHERE ebeln = p_ebeln.
LOOP AT i_ekpo INTO wa_ekpo.
    CONCATENATE wa_ekpo-ebeln wa_ekpo-ebelp
       INTO l_name.
    CALL FUNCTION 'READ_TEXT'
      EXPORTING
        id                      = c_id
        language                = sy-langu
        name                    = l_name
        object                  = c_object
      TABLES
        lines                   = i_tline
      EXCEPTIONS
        id                      = 1
        language                = 2
        name                    = 3
        not_found               = 4
        object                  = 5
        reference_check         = 6
        wrong_access_to_archive = 7
        OTHERS                  = 8.
    IF sy-subrc EQ 0.
      LOOP AT i_tline INTO wa_tline.
        WRITE:/ wa_tline-tdline.
        " Format wa_tline-tdline in the way you need to print out
      ENDLOOP.
    ENDIF.
ENDLOOP.
Regards
Eswar

TS3147 How connect printer to the printer driver in system preference?

I have an Epson SX600 printer, of which the software can't be found when Apple does the automated thing. However, it is part of the 1.4 gig that you can download from this site. Once unpacked, how does one actually install the driver for the printer? There's a long list. But how do I make System Prefernce actually go look in that directory, instead og going online? It states in System Preference that Apple has the software and it can be downloaded, but once I try that, it comes back with a message that the software/driver is NOT available for download.
I keep going around in circles...
So: I now have the drivers downloaded in a package of 1.4 gig. Those are placed in my Library on my "Macintosh" folder.
How do I connect the driver to the printer in System Preference?
Thanks a milion!
Aernout

OK, follow these steps:
1. Add Printer, i.e. click on +. In my examples, I chose Canon MP 250, which is installed (deleted it, and put it back)
2. Ignore the default choice, and go to Select Printer Software
3. Choose manually the driver

How to print out the data from the file ?

hi all,
i have upload my file to here :
[http://www.freefilehosting.net/ft-v052010-05-09 ]
anyone can help me to print out the data from the file ?
the content of the file should be like this :
185.56.83.89 156.110.16.1 17 53037 53 72 1
and for the seven column is
srcIP dstIP prot srcPort dstPort octets packets

hi all,
i have try to do this
public static void Readbinary() throws Exception
          String file = "D:\\05-09.190501+0800";
          DataInputStream dis = new DataInputStream(new FileInputStream(file));
          //but then how to read the content ??????can you give me more hint ?????
i have find the netflow v5 structure by C
struct NFHeaderV5{
uint16_t version; // flow-export version number
uint16_t count; // number of flow entries
uint32_t sysUptime;
uint32_t unix_secs;
uint32_t unix_nsecs;
uint32_t flow_sequence; // sequence number
uint8_t engine_type; // no VIP = 0, VIP2 = 1
uint8_t engine_id; // VIP2 slot number
uint16_t reserved; // reserved1,2
struct NFV5{
ipv4addr_t srcaddr; // source IP address
ipv4addr_t dstaddr; // destination IP address
ipv4addr_t nexthop; // next hop router's IP address
uint16_t input; // input interface index
uint16_t output; // output interface index
uint32_t pkts; // packets sent in duration
uint32_t bytes; // octets sent in duration
uint32_t first; // SysUptime at start of flow
uint32_t last; // and of last packet of flow
uint16_t srcport; // TCP/UDP source port number or equivalent
uint16_t dstport; // TCP/UDP destination port number or equivalent
uint8_t pad;
uint8_t tcp_flags; // bitwise OR of all TCP flags in flow; 0x10
// for non-TCP flows
uint8_t prot; // IP protocol, e.g., 6=TCP, 17=UDP, ...
uint8_t tos; // IP Type-of-Service
uint16_t src_as; // originating AS of source address
uint16_t dst_as; // originating AS of destination address
uint8_t src_mask; // source address prefix mask bits
uint8_t dst_mask; // destination address prefix mask bits
uint16_t reserved;
but how to translate the structure to java,then get the data from the file ?
Edited by: 903893 on Dec 21, 2011 10:52 PM

How to print from the clipboard

If I copy some text from a doc. to the clipboard, how can I print it?

I don't know of a way to print directly from the clipboard. You can paste the text into a new document of any text editing program, notepad widget, etc., and print from there. Also, in some applications (MS Word, for example), if you select text in the document and then Print, there's a radio button option to print just the Selection, which will print only the text you have selected without needing to copy/paste.

How to print out the exception caught in the servlet controller to JSP?

May I know how to print the Exception caught and the stacktrace thing? What i try to do this in the databaseErrata.jsp code was not given me any answer. Instead, causing a number of errors.
Below are my servlet controller code and databaseErrata.jsp code.
----$CATALINA_HOME/webapps/mvct/WEB-INF/classes/Action.java----
import java.io.*;
import java.sql.*;
import java.text.*;
import javax.naming.*;
import javax.servlet.*;
import javax.servlet.http.*;
import foo.*;
public class Action extends HttpServlet
public void doGet(HttpServletRequest request,
HttpServletResponse response)
    throws ServletException, IOException
    response.setContentType("text/html");
    PrintWriter out = response.getWriter();
    // find real web resource
    String forward = request.getServletPath();
//'forward' is a string variable consist of url
    if(forward.endsWith(".do"))
      forward = forward.substring(1, forward.length()
-3) + ".jsp";
    else
      throw new ServletException(
      "Action servlet called with illegal path: " +
forward); //display the defined error msg and error
url within the 'forward'
out.println("forward after forward.substring() = " +
forward + "</br>");
    // build and validate view page attributes
    HttpSession session = request.getSession();
    try
      byEmployeeId convert =
(byEmployeeId)session.getAttribute("convert");
      if(convert == null)
        session.setAttribute("convert", convert = new
byEmployeeId());
      convert.start("11145");
    catch(NamingException ex)
      request.setAttribute("exception", ex);
      forward = "databaseError.jsp";
    catch(SQLException ex)
      request.setAttribute("exception", ex);
      forward = "databaseErrata.jsp";
    catch(IllegalArgumentException ex)
      request.setAttribute("message", "<FONT COLOR='red'>"+ex.getMessage()+"</font>");
    // forward request
    RequestDispatcher rd =
request.getRequestDispatcher(forward);
    rd.forward(request,response);
public void doPost(HttpServletRequest request,
HttpServletResponse response)
    throws ServletException, IOException
      doGet(request, response);
}----$CATALINA_HOME/webapps/mvct/databaseErrata.jsp----
<% String message = (String)request.getAttribute("message"); %>
<HTML>
<HEAD>
<TITLE>databaseErrata.jsp Page</TITLE>
</HEAD>
<BODY>
<% if (message != null) { %>
Message = <%= message %>
<H1>databaseErrata.jsp Page</H1>
</BODY>
</HTML>

You're missing a closing curly bracket in the JSP page.
Also, this will only print the exception message. I would recommend passing on the whole Exception object.
ie request.setAttribute("theException", ex);
That way you have the exception object to print the stacktrace from.
However, you are doing this manually. The container can handle this stuff for you if you so wish.
Check the documentation on error pages. You are able to set up an error page in the web.xml, that all exceptions/errors get directed to.
something like:
<error-page>
<exception-type>java.lang.Exception</exception-type>
<location>/errorPages/debugError.jsp</location>
</error-page>
You then write the JSP page something like this
<%@ page language="java" %>
<%@ page isErrorPage="true" %>
<%@ page import="java.util.*, java.io.*" %>
<h1>Programming error <BR> FOR DEBUGGING PURPOSES ONLY</h1>
<p>This page is only for debugging purposes. Should not be deployed to live environment.</p>
<p>Details of the error are as follows:</p>
<table border = 1 width=200>
<tr><td valign=top><strong>Error :</strong></td><td><%=exception.getMessage()%></td></tr>
<tr><td valign=top width='80%'><strong>Trace :</strong></td><td><pre><% exception.printStackTrace(new PrintWriter(out));%></pre></td></tr>
</table>
<br>Cheers,
evnafets

How to print out the informations of mp3 for the format of TagContent?

I can get the mp3 title, but when i try to print it out, it is the wrong code...
i know the format of title is TagContent .
But how to print such " TagContent " format by system.out.print?
Here's my code :
import de.vdheide.mp3.*;
import java.io.*;
public class c
public static void main (String [] args) throws IOException
try
MP3File mp3 = new MP3File("fly.mp3");
System.out.println( mp3.getTitle());
catch (Exception e)
}

Hello
If I understand your question correctly, you are trying to print out the indexes where the value in your matrix is greater than 4
If this is the case, then what you need to use is nested for loops e.g.
for (int i = 0; i< array[0].length; i++)
for (int j = 0; j< array[].length; j++)
int value = array[i][j];
if (value > 4)
System.out.println("The pos is (" + i + "," + j + ")" );
Regarding the syntax I have used to get the size of the array, I am not sure if this is correct, but you should have an idea of what I am doing.
Sajid

I need help!!! I don't know how to print from the apps.

I have tried to add apps to the printer but they do not show up. And first of all i don't know how to manage anything on this website. I don't know how to print what i need.

Sledro1 wrote:
I can't connect to the internet while using my WRT54G2 router. I am using AT&T DSL and it works just fine through the modem, but whenever I connect my router to the modem the internet shuts down. I am connecting the modem and router to a Mac OS 10.4.1 and am using the wireless for a MacBook OS 10.5.8. It had worked fine for about 10 months, then all the sudden it went out on me.
Does anyone have any ideas? I was told that it might be conflicting IP addresses., but I don't know if that's right.
Thanks
Is it a 2Wire modem/router? If it is your only option may be placing the 2Wire in the bridge mode , and letting the WRT54G2 router do the Ppoe login for you.

How to print on the back of photo paper so it will dry.

I need to print on the back of some photos I have. I am using an HP Officejet Pro 8500A using Windows 7. I have tried to print on these photos but the ink will not dry.
The paper I am using is 4x6 glossy everyday photo paper.
What should I change in the settings to get the ink to dry????
This question was solved.
View Solution.

Hi,
most of the Photo Paper will only allow you to print on a single side.
Unless the used Photo Paper is intended for double side printing you will not be able to print on the back of the paper.
There are no different settings for any of the sided, it only depand on the used media.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How to print within the margins of the page when printing from iPad to HP Envy D410a?

When I try to print something from the iPad, either the 1 or the 2, the result is that the image sent from the iPad is printed Borderless, which of course results in parts of the print being cutoff, is there someway to resize the print through the printer, since the iPads don't have drivers?
Also, I seem to have a similar problem when printing from my PC, only in it's case the resulting print is smaller, it seems to print into a margin size of 1" on all sides. The only app that I have found that lets me override this is Adobe Reader which has the page scaling options.
All suggestions will be appreciated. TIA.
Stephen.
This question was solved.
View Solution.

You may download HP iPrint software to edit margins & borders:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01616126&lc=en&cc=au&dlc=en&product=4073738
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

How to print the the database diagram?

Similar Messages

Maybe you are looking for