How to print traffic lights in ALV reports
hi how to print traffic lights on selection screen in alv reports
HI,
check below code
TYPE-POOLS : icon.
types: BEGIN OF ty_display,
status TYPE icon-id,
bukrs TYPE bseg-bukrs,
gjahr TYPE bseg-gjahr,
monat TYPE monat,
work_order TYPE z_work_order,
glaccount TYPE saknr,
message TYPE string,
END OF ty_display.
data : it_display TYPE TABLE OF ty_display,
wa_display TYPE ty_display.
WRITE icon_led_green AS ICON TO wa_display-status.
wa_display-gjahr = p_year.
wa_display-bukrs = p_cc.
wa_display-monat = p_period.
wa_display-work_order = v_aufnr.
wa_display-glaccount = wa_bseg-hkont.
APPEND wa_display TO it_display.
WRITE icon_led_red AS ICON TO wa_display-status.
wa_display-gjahr = p_year.
wa_display-bukrs = p_cc.
wa_display-monat = p_period.
wa_display-work_order = v_aufnr.
wa_display-glaccount = wa_bseg-hkont.
wa_display-message = text-010.
APPEND wa_display TO it_display.
change the icon color based on your requirement and append it to the internal table which you have to display in ALV.
reward points if it is helpful.
Regards,
Srilatha
Similar Messages
-
How we can drill-down, sorting, traffic lights, in ALV report
hi gurus ,
how we can drill-down, sorting, traffic lights, in ALV report .
please any one suggest that...
regards,
praveenCheck the sample code for drill-down, sorting, traffic lights, in ALV report.
REPORT YMS_COLOURALV NO STANDARD PAGE HEADING.
TYPE-POOLS: SLIS, ICON.
DATA: FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: BEGIN OF IMARA OCCURS 0,
LIGHT(4) TYPE C,
MATNR TYPE MARA-MATNR,
MTART TYPE MARA-MTART,
MAKTX TYPE MAKT-MAKTX,
COLOR_LINE(4) TYPE C,
TCOLOR TYPE SLIS_T_SPECIALCOL_ALV, "cell
END OF IMARA.
DATA: XCOLOR TYPE SLIS_SPECIALCOL_ALV.
START-OF-SELECTION.
PERFORM GET_DATA.
PERFORM WRITE_REPORT.
FORM GET_DATA.
WRITE ICON_GREEN_LIGHT AS ICON TO IMARA-LIGHT.
IMARA-MATNR = 'ABC'.
IMARA-MTART = 'ZCFG'.
IMARA-MAKTX = 'This is description for ABC'.
APPEND IMARA.
WRITE ICON_YELLOW_LIGHT AS ICON TO IMARA-LIGHT.
IMARA-MATNR = 'DEF'.
IMARA-MTART = 'ZCFG'.
IMARA-MAKTX = 'This is description for DEF'.
APPEND IMARA.
WRITE ICON_RED_LIGHT AS ICON TO IMARA-LIGHT.
IMARA-MATNR = 'GHI'.
IMARA-MTART = 'ZCFG'.
IMARA-MAKTX = 'This is description for GHI'.
APPEND IMARA.
LOOP AT IMARA.
IF SY-TABIX = 1.
IMARA-COLOR_LINE = 'C410'. " color line
ENDIF.
IF SY-TABIX = 2. " color CELL
CLEAR XCOLOR.
XCOLOR-FIELDNAME = 'MTART'.
XCOLOR-COLOR-COL = '3'.
XCOLOR-COLOR-INT = '1'. " Intensified on/off
XCOLOR-COLOR-INV = '0'.
APPEND XCOLOR TO IMARA-TCOLOR.
ENDIF.
MODIFY IMARA.
ENDLOOP.
ENDFORM. "get_data
FORM WRITE_REPORT.
DATA: LAYOUT TYPE SLIS_LAYOUT_ALV.
LAYOUT-COLTAB_FIELDNAME = 'TCOLOR'.
LAYOUT-INFO_FIELDNAME = 'COLOR_LINE'.
PERFORM BUILD_FIELD_CATALOG.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FIELDCAT
TABLES
T_OUTTAB = IMARA.
ENDFORM. "write_report
FORM BUILD_FIELD_CATALOG.
DATA: FC_TMP TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
CLEAR: FIELDCAT. REFRESH: FIELDCAT.
CLEAR: FC_TMP.
FC_TMP-REPTEXT_DDIC = 'Status'.
FC_TMP-FIELDNAME = 'LIGHT'.
FC_TMP-TABNAME = 'IMARA'.
FC_TMP-OUTPUTLEN = '4'.
FC_TMP-ICON = 'X'.
APPEND FC_TMP TO FIELDCAT.
CLEAR: FC_TMP.
FC_TMP-REPTEXT_DDIC = 'Material Number'.
FC_TMP-FIELDNAME = 'MATNR'.
FC_TMP-TABNAME = 'IMARA'.
FC_TMP-OUTPUTLEN = '18'.
APPEND FC_TMP TO FIELDCAT.
CLEAR: FC_TMP.
FC_TMP-REPTEXT_DDIC = 'Material Type'.
FC_TMP-FIELDNAME = 'MTART'.
FC_TMP-TABNAME = 'IMARA'.
FC_TMP-OUTPUTLEN = '10'.
APPEND FC_TMP TO FIELDCAT.
CLEAR: FC_TMP.
FC_TMP-REPTEXT_DDIC = 'Material'.
FC_TMP-FIELDNAME = 'MAKTX'.
FC_TMP-TABNAME = 'IMARA'.
FC_TMP-OUTPUTLEN = '40'.
APPEND FC_TMP TO FIELDCAT.
ENDFORM. "build_field_catalog -
How to add Traffic Lights to a Report?
Hi,
How do U create a Traffic Light? and how to you change the Light? That's all I need.
Thanks,
Kishanhi dude,
This is the way u add lights to ur alv report.
I'm following this method and i'm getting lights. This will work for sure.
In data declaration along with your alv display structure as a field named lights(any name).
DATA : BEGIN OF wa_srr,
vbeln LIKE vbak-vbeln, "Sales Order number
posnr LIKE vbap-posnr, "Item nunmber
matnr LIKE makt-matnr, "Material number Desc
maktx LIKE makt-maktx, "Material Description
gbstk LIKE vbuk-gbstk, "Completion status
bukrs LIKE knb1-bukrs, "Company Code
butxt LIKE t001-butxt, "Company Code description
vkorg LIKE vbak-vkorg, "Sales organization
vtext LIKE tvkot-vtext, "Sales Org description
vtweg LIKE vbak-vtweg, "Distribution Channel
dtext LIKE tvtwt-vtext, "Dist Channel description
spart LIKE vbak-spart, "Division
dvtxt LIKE tspat-vtext, "Division Description
kunnr LIKE vbak-kunnr, "Customer Number
name1 LIKE kna1-name1, "Customer Name
land1 LIKE kna1-land1, "Country
regio LIKE kna1-regio, "State
ort01 LIKE kna1-ort01, "City
erdat LIKE vbak-erdat, "Creation Date
vdatu LIKE vbak-vdatu, "Due date
kwmeng LIKE vbap-kwmeng, "Material Quantity
netpr LIKE vbap-netpr, "unit net price
netwr LIKE vbap-netwr, "Price
wavwr LIKE vbap-wavwr, "Cost price
bzirk LIKE vbkd-bzirk, "Sales District
bztxt LIKE t171t-bztxt, "Sales District Discription
lights, "Diplaying Status
END OF wa_srr.
While you are building the field cat do as follows
FORM build_layout CHANGING l_wa_layout TYPE slis_layout_alv.
l_wa_layout-zebra = cb_zebr. "Set alterante colored line
l_wa_layout-colwidth_optimize = cb_colop. "Optimize column width
l_wa_layout-no_vline = cb_novli. "No vertical line
l_wa_layout-no_colhead = cb_nocol. "no column Header
l_wa_layout-lights_fieldname = 'LIGHTS'. "Set light field
(assigning the field u have added in ur structure here as light field in alv report)
ENDFORM. " BUILD_LAYOUT
Then as per the logic, u make green, yellow or red light
Example,
FORM build_light .
LOOP AT it_srr INTO wa_srr. "for all entries in the table
IF wa_srr-gbstk = 'C'. "If status is 'completed',
wa_srr-lights = '3'. "Show green signal light
ELSEIF wa_srr-gbstk = 'B'. "If status is 'Partial'
wa_srr-lights = '2'. "Show yellow signal light
ELSE. "If status is 'incomplete'
wa_srr-lights = '1'. "Show red signal light
ENDIF.
MODIFY it_srr FROM wa_srr. "Update to table
ENDLOOP.
ENDFORM. " build_light
after building ur layout, Pass it to ur alv function module like this.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_callback_top_of_page = 'TOP_OF_PAGE'
i_background_id = 'ALV_BACKGROUND'
i_grid_title = text-011
pass ur layout structure here********
is_layout = wa_layout
it_fieldcat = it_fcat
it_sort = it_sort
i_save = v_save
is_variant = wa_variant
is_print = wa_print
TABLES
t_outtab = it_srr
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE i001. "List cannot be displayed
ENDIF.
wat all i did to add light is,
1) adding an extra field in the main structure.
2)create internal table with this structure as data table for alv report
3) add 'field name' field in layout
4) I have passed values(3, 2, 1) for green, yellow and red light resp, to the field(LIGHTS) in the internal table that is passed to alv function module.(Based on some condition)
5) pass the layout structure layout to alv function module
Thats it. If u do all this teps, u r done with it.
Lemme know u solved it by giving points.
with regards,
praveen. -
How to print all lines in alv report?
hi
i am using the functions 'FP_JOB_OPEN' and 'FP_JOB_CLOSE' in order to print the form
i want it to be printed without prompting me the 'PRINT' window and pushing the ok button .
is there a way to do that ? i put reqimm = 'X' and nodialog = 'X' but it didnt fix it
thanksHi Ami,
At START-OF-SELECTION event write your code between below statements.
NEW-PAGE PRINT ON NO DIALOG.
Your Code
NEW-PAGE PRINT OFF.
This statement NEW-PAGE PRINT ON with addition of NO DIALOG will not prompt you for Printer selection. It will directly create a spool. -
How to use traffic lights concept in alv in webdynpro abap
Hai ,
How to use traffic lights concept for alv in webdynpro abap. If possible give me some code.Hi Ravi,
You can create ICON to get traffic light.
Go through this step by step.. in this example
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/1190424a-0801-0010-84b5-ef03fd2d33d9?quicklink=index&overridelayout=true
Please go through this...
Re: Display ICON in the ALV table column
Re: Image in ALV
cheers,
Kris. -
Display Traffic Lights in ALV TREE
Hi,
I have to display traffic light in ALV tree but i am not able to find out what parameter i should pass like in ALV grid where we can set is_layout (BCALV_GRID_04).
Thanks in advance.
Regards,
HarshHi,
Please take a look at my code below. Hope it suits your requirement.
P.S. Please award points if it helps...
*& Report ZMM_R_PO_TO_IPURCH_XI
*& PROGRAM TYPE : Report
*& RICEF ID :
*& TITLE : ZMM_R_PO_TO_IPURCH_XI
*& SAP Module : MM
*& CREATION DATE : 02/06/2008
*& AUTHOR : Aris Hidalgo
*& DESIGNER : Aris Hidalgo
*& DESCRIPTION :
*$**********************************************************************
*$ CHANGE HISTORY
*$----------------------------------------------------------------------
*$ DATE | T-Num | Description | Reference
** | | |
*$**********************************************************************
REPORT zmm_r_po_to_ipurch_xi
NO STANDARD PAGE HEADING
MESSAGE-ID zmm.
* Data Dictionary Table/s *
TABLES: edidc.
* SELECTION-SCREEN *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_credat FOR edidc-credat OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: rb_sum RADIOBUTTON GROUP grp1,
rb_det RADIOBUTTON GROUP grp1.
SELECTION-SCREEN END OF BLOCK b2.
*/ CLASS DEFINITION/S /*
* CLASS lcl_data_def DEFINITION
CLASS lcl_data_def DEFINITION ABSTRACT.
PUBLIC SECTION.
TYPES: BEGIN OF t_edidc,
docnum TYPE edidc-docnum,
docrel TYPE edidc-docrel,
status TYPE edidc-status,
doctyp TYPE edidc-doctyp,
direct TYPE edidc-direct,
rcvpor TYPE edidc-rcvpor,
rcvprt TYPE edidc-rcvprt,
rcvprn TYPE edidc-rcvprn,
rcvsad TYPE edidc-rcvsad,
sndpor TYPE edidc-sndpor,
sndprt TYPE edidc-sndprt,
sndprn TYPE edidc-sndprn,
sndsad TYPE edidc-sndsad,
credat TYPE edidc-credat,
cretim TYPE edidc-cretim,
mestyp TYPE edidc-mestyp,
idoctp TYPE edidc-idoctp,
END OF t_edidc.
TYPES: BEGIN OF t_output,
exception TYPE char1,
ebeln TYPE ekko-ebeln,
lifnr TYPE lfa1-lifnr,
name1 TYPE lfa1-name1,
credat TYPE edidc-credat,
cretim TYPE edidc-cretim,
END OF t_output.
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekko-ebeln,
lifnr TYPE ekko-lifnr,
END OF t_ekko.
TYPES: BEGIN OF t_lfa1,
lifnr TYPE lfa1-lifnr,
name1 TYPE lfa1-name1,
END OF t_lfa1.
DATA: gt_edidc TYPE STANDARD TABLE OF t_edidc,
gt_output TYPE STANDARD TABLE OF t_output,
wa_output LIKE LINE OF gt_output,
gt_ekko TYPE HASHED TABLE OF t_ekko
WITH UNIQUE KEY ebeln,
gt_lfa1 TYPE HASHED TABLE OF t_lfa1
WITH UNIQUE KEY lifnr.
ENDCLASS. "lcl_data_def DEFINITION
CLASS lcl_alv_routines DEFINITION DEFERRED.
CLASS lcl_handle_events DEFINITION DEFERRED.
* CLASS lcl_get_data DEFINITION
CLASS lcl_get_data DEFINITION INHERITING FROM lcl_data_def.
PUBLIC SECTION.
METHODS: get_idocs,
read_idocs,
process_data
IMPORTING
im_docnum TYPE edidc-docnum.
PRIVATE SECTION.
CONSTANTS: lc_mestyp TYPE edidc-mestyp VALUE 'ZMARKETSITE_PURCHASE_ORDER',
lc_idoctp TYPE edidc-idoctp VALUE 'ZMARKETSITE_PURCHASE_ORDER01',
lc_segnam TYPE edid4-segnam VALUE 'ZMARKETSITE_ORDER_HEADER1'.
CONSTANTS: lc_red TYPE i VALUE 1,
lc_yellow TYPE i VALUE 2,
lc_green TYPE i VALUE 3.
DATA: lv_stat_message TYPE bdidocattr-message,
o_lcl_alv_routines TYPE REF TO lcl_alv_routines.
DATA: ls_idoc_control TYPE edidc,
lv_tot_data_recs TYPE sy-dbcnt, "#EC NEEDED
lv_tot_status_recs TYPE sy-dbcnt. "#EC NEEDED
DATA: lt_edids TYPE STANDARD TABLE OF edids,
lt_edidd TYPE STANDARD TABLE OF edidd.
ENDCLASS. "lcl_get_data DEFINITION
* CLASS lcl_alv_routines DEFINITION
CLASS lcl_alv_routines DEFINITION INHERITING FROM lcl_get_data.
PUBLIC SECTION.
DATA: lcl_table TYPE REF TO cl_salv_table,
lcl_container TYPE REF TO cl_gui_custom_container,
lcl_handle_events TYPE REF TO lcl_handle_events,
lcl_columns TYPE REF TO cl_salv_columns_table,
lcl_column TYPE REF TO cl_salv_column_table,
lcl_events2 TYPE REF TO cl_salv_events_table,
lcl_display_settings TYPE REF TO cl_salv_display_settings,
lcl_functions TYPE REF TO cl_salv_functions_list,
lcl_display TYPE REF TO cl_salv_display_settings,
lcl_aggregations TYPE REF TO cl_salv_aggregations,
lcl_sorts TYPE REF TO cl_salv_sorts,
lcl_content TYPE REF TO cl_salv_form_element,
lcl_header TYPE REF TO cl_salv_form_header_info,
ls_color TYPE lvc_s_colo.
DATA: lcl_grid TYPE REF TO cl_salv_form_layout_grid,
lcl_grid_1 TYPE REF TO cl_salv_form_layout_grid,
lcl_grid_2 TYPE REF TO cl_salv_form_layout_grid,
lcl_label TYPE REF TO cl_salv_form_label,"#EC NEEDED
lcl_text TYPE REF TO cl_salv_form_text,
gt_t247 TYPE STANDARD TABLE OF t247,
wa_t247 LIKE LINE OF gt_t247,
lv_text TYPE string.
METHODS: display_data
IMPORTING
im_output LIKE gt_output,
display_top_of_page.
PRIVATE SECTION.
DATA: lv_string TYPE string,
lv_date1 TYPE c LENGTH 10,
lv_time TYPE c LENGTH 10,
lv_title TYPE string.
ENDCLASS. "lcl_alv_routines DEFINITION
* CLASS lcl_handle_events DEFINITION
CLASS lcl_handle_events DEFINITION.
PUBLIC SECTION.
METHODS:
on_link_click FOR EVENT link_click OF cl_salv_events_table
IMPORTING row column.
ENDCLASS. "lcl_handle_events DEFINITION
*/ IMPLEMENTATION/S /*
* CLASS lcl_get_data IMPLEMENTATION
CLASS lcl_get_data IMPLEMENTATION.
* METHOD get_idocs
METHOD get_idocs.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
* PERCENTAGE = 0
text = text-p01.
SELECT docnum docrel status doctyp
direct rcvpor rcvprt rcvprn
rcvsad sndpor sndprt sndprn
sndsad credat cretim mestyp
idoctp
FROM edidc
INTO TABLE gt_edidc
WHERE mestyp = lc_mestyp
AND idoctp = lc_idoctp
AND credat IN s_credat.
IF gt_edidc[] IS NOT INITIAL.
* Get IDOC details
CALL METHOD me->read_idocs.
ENDIF.
ENDMETHOD. "get_idocs
* METHOD read_idocs
METHOD read_idocs.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
* PERCENTAGE = 0
text = text-p02.
FIELD-SYMBOLS: <fs_edidc> LIKE LINE OF gt_edidc,
<fs_output> LIKE LINE OF gt_output,
<fs_ekko> LIKE LINE OF gt_ekko,
<fs_lfa1> LIKE LINE OF gt_lfa1.
LOOP AT gt_edidc ASSIGNING <fs_edidc>.
CLEAR ls_idoc_control.
REFRESH: lt_edids, lt_edidd.
* Get status text of IDOC
CALL FUNCTION 'IDOC_GET_MESSAGE_ATTRIBUTE'
EXPORTING
idoc_number = <fs_edidc>-docnum
IMPORTING
idoc_message = lv_stat_message.
* Get IDOC details
CALL FUNCTION 'IDOC_READ_COMPLETELY'
EXPORTING
document_number = <fs_edidc>-docnum
IMPORTING
idoc_control = ls_idoc_control
number_of_data_records = lv_tot_data_recs
number_of_status_records = lv_tot_status_recs
TABLES
int_edids = lt_edids
int_edidd = lt_edidd
EXCEPTIONS
document_not_exist = 1
document_number_invalid = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* Pass data to output table
CALL METHOD me->process_data
EXPORTING
im_docnum = <fs_edidc>-docnum.
ENDLOOP.
DELETE gt_output WHERE ebeln IS INITIAL.
IF gt_output[] IS NOT INITIAL.
* Get vendor for fetched POs
SELECT ebeln lifnr
FROM ekko
INTO TABLE gt_ekko
FOR ALL ENTRIES IN gt_output
WHERE ebeln = gt_output-ebeln.
IF gt_ekko[] IS NOT INITIAL.
* Get name of vendors
SELECT lifnr name1
FROM lfa1
INTO TABLE gt_lfa1
FOR ALL ENTRIES IN gt_ekko
WHERE lifnr = gt_ekko-lifnr.
ENDIF.
* Pass vendor details to output table
LOOP AT gt_output ASSIGNING <fs_output>.
READ TABLE gt_ekko ASSIGNING <fs_ekko>
WITH TABLE KEY ebeln = <fs_output>-ebeln.
IF sy-subrc = 0.
READ TABLE gt_lfa1 ASSIGNING <fs_lfa1>
WITH TABLE KEY lifnr = <fs_ekko>-lifnr.
IF sy-subrc = 0.
<fs_output>-lifnr = <fs_lfa1>-lifnr.
<fs_output>-name1 = <fs_lfa1>-name1.
ENDIF.
ENDIF.
ENDLOOP.
CREATE OBJECT o_lcl_alv_routines.
CALL METHOD o_lcl_alv_routines->display_data
EXPORTING
im_output = gt_output[].
ENDIF.
ENDMETHOD. "read_idocs
* METHOD process_data
METHOD process_data.
FIELD-SYMBOLS: <fs_edidd> LIKE LINE OF lt_edidd.
IF lv_stat_message CP 'ok' OR
lv_stat_message CP 'positive'.
wa_output-exception = lc_green.
ELSEIF lv_stat_message CP 'error' OR
lv_stat_message CP 'negative'.
wa_output-exception = lc_red.
ELSE.
wa_output-exception = lc_yellow.
ENDIF.
READ TABLE lt_edidd ASSIGNING <fs_edidd>
WITH KEY docnum = im_docnum
segnam = lc_segnam.
IF sy-subrc = 0.
wa_output-ebeln = <fs_edidd>-sdata+0(10).
ENDIF.
wa_output-credat = ls_idoc_control-credat.
wa_output-cretim = ls_idoc_control-cretim.
APPEND wa_output TO gt_output.
CLEAR wa_output.
ENDMETHOD. "process_data
ENDCLASS. "lcl_get_data IMPLEMENTATION
* CLASS lcl_alv_routines IMPLEMENTATION
CLASS lcl_alv_routines IMPLEMENTATION.
* METHOD display_data
METHOD display_data.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
percentage = 0
text = text-p03.
gt_output[] = im_output[].
TRY.
cl_salv_table=>factory(
EXPORTING
list_display = ''
IMPORTING
r_salv_table = lcl_table
CHANGING
t_table = gt_output ).
CATCH cx_salv_msg. "#EC NO_HANDLER
ENDTRY.
lcl_functions = lcl_table->get_functions( ).
* Set all standard ALV functions
lcl_functions->set_all( abap_true ).
lcl_columns = lcl_table->get_columns( ).
lcl_columns->set_optimize( '' ).
* Set display to striped pattern
lcl_display = lcl_table->get_display_settings( ).
lcl_display->set_striped_pattern( cl_salv_display_settings=>true ).
*/Sort columns
TRY.
lcl_sorts = lcl_table->get_sorts( ).
CATCH cx_salv_not_found. "#EC NO_HANDLER
ENDTRY.
lcl_sorts->set_group_active( ).
TRY.
lcl_sorts->add_sort(
columnname = 'EBELN'
subtotal = '' ).
CATCH cx_salv_not_found cx_salv_existing cx_salv_data_error."#EC NO_HANDLER
ENDTRY.
*/Set column names
TRY.
lcl_columns->set_exception_column( 'EXCEPTION' ).
CATCH cx_salv_data_error. "#EC NO_HANDLER
ENDTRY.
TRY.
lcl_column ?= lcl_columns->get_column( 'EXCEPTION' ).
lcl_column->set_short_text( text-h01 ).
lcl_column->set_medium_text( text-h01 ).
lcl_column->set_long_text( text-h01 ).
lcl_column->set_output_length( '6' ).
CATCH cx_salv_not_found. "#EC NO_HANDLER
ENDTRY.
TRY.
lcl_column ?= lcl_columns->get_column( 'EBELN' ).
lcl_column->set_short_text( text-h02 ).
lcl_column->set_medium_text( text-h02 ).
lcl_column->set_long_text( text-h02 ).
lcl_column->set_output_length( '9' ).
CATCH cx_salv_not_found. "#EC NO_HANDLER
ENDTRY.
TRY.
lcl_column ?= lcl_columns->get_column( 'LIFNR' ).
* lcl_column->set_short_text( text-h03 ).
lcl_column->set_medium_text( text-h03 ).
lcl_column->set_long_text( text-h03 ).
lcl_column->set_output_length( '11' ).
CATCH cx_salv_not_found. "#EC NO_HANDLER
ENDTRY.
TRY.
lcl_column ?= lcl_columns->get_column( 'NAME1' ).
* lcl_column->set_short_text( text-h04 ).
* lcl_column->set_medium_text( text-h04 ).
lcl_column->set_long_text( text-h04 ).
lcl_column->set_output_length( '30' ).
CATCH cx_salv_not_found. "#EC NO_HANDLER
ENDTRY.
TRY.
lcl_column ?= lcl_columns->get_column( 'CREDAT' ).
* lcl_column->set_short_text( text-h05 ).
* lcl_column->set_medium_text( text-h05 ).
lcl_column->set_long_text( text-h05 ).
lcl_column->set_output_length( '13' ).
CATCH cx_salv_not_found. "#EC NO_HANDLER
ENDTRY.
TRY.
lcl_column ?= lcl_columns->get_column( 'CRETIM' ).
* lcl_column->set_short_text( text-h06 ).
* lcl_column->set_medium_text( text-h06 ).
lcl_column->set_long_text( text-h06 ).
lcl_column->set_output_length( '13' ).
CATCH cx_salv_not_found. "#EC NO_HANDLER
ENDTRY.
*/Set aggregations
* TRY.
* lcl_aggregations = lcl_table->get_aggregations( ).
* CATCH cx_salv_not_found. "#EC NO_HANDLER
* ENDTRY.
* TRY.
* lcl_aggregations->add_aggregation( '' ).
* CATCH cx_salv_not_found cx_salv_data_error cx_salv_existing."#EC NO_HANDLER
* ENDTRY.
*/Hide columns
* TRY.
* lcl_column ?= lcl_columns->get_column( 'DESCRIPT' ).
* lcl_column->set_visible( if_salv_c_bool_sap=>false ).
* CATCH cx_salv_not_found. "#EC NO_HANDLER
* ENDTRY.
*/Display top of page
CALL METHOD me->display_top_of_page.
lcl_table->set_top_of_list( lcl_content ).
*/Handle ALV events
lcl_events2 = lcl_table->get_event( ).
CREATE OBJECT lcl_handle_events.
SET HANDLER lcl_handle_events->on_link_click FOR lcl_events2.
lcl_display_settings = lcl_table->get_display_settings( ).
lcl_table->display( ).
ENDMETHOD. "display_data
* METHOD display_top_of_page
METHOD display_top_of_page.
CREATE OBJECT lcl_grid.
lv_title = text-t01.
lcl_grid->create_header_information(
row = 1
column = 1
text = lv_title
tooltip = lv_title ).
lcl_grid->add_row( ).
lcl_grid_1 = lcl_grid->create_grid(
row = 3
column = 1 ).
CLEAR lv_string.
CONCATENATE: sy-datum+4(2) '/' sy-datum+6(2) '/' sy-datum+0(4)
INTO lv_date1.
CONCATENATE: text-t02 lv_date1
INTO lv_string
SEPARATED BY space.
lcl_label = lcl_grid_1->create_label(
row = 1
column = 1
text = lv_string
tooltip = lv_string ).
CLEAR lv_string.
CONCATENATE: sy-uzeit+0(2) ':' sy-uzeit+2(2) ':' sy-uzeit+4(2)
INTO lv_time.
CONCATENATE: text-t03 lv_time
INTO lv_string
SEPARATED BY space.
lcl_label = lcl_grid_1->create_label(
row = 2
column = 1
text = lv_string
tooltip = lv_string ).
lcl_content = lcl_grid.
ENDMETHOD. "display_top_of_page
ENDCLASS. "lcl_alv_routines IMPLEMENTATION
* CLASS lcl_handle_events IMPLEMENTATION
CLASS lcl_handle_events IMPLEMENTATION.
* METHOD on_link_click
METHOD on_link_click.
ENDMETHOD. "on_link_click
ENDCLASS. "lcl_handle_events IMPLEMENTATION
* START-OF-SELECTION *
START-OF-SELECTION.
DATA: o_lcl_get_data TYPE REF TO lcl_get_data.
CREATE OBJECT o_lcl_get_data.
CALL METHOD o_lcl_get_data->get_idocs. -
hi experts
i have itab having a field status and its data ( 'open' , 'complete')
pls explain the needed steps to be followed for setting the traffic light in ALV.
open --red light
complete -- green light.
pls, explain me the step by step procedure.
thanks in advance.
Regards
RajaramHi Raja,
Try this source coode and you can able to do it.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = gd_repid
i_callback_top_of_page = 'TOP-OF-PAGE'
i_callback_html_end_of_list = 'END_OF_LIST_HTML'
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
i_save = 'X'
tables
t_outtab = it_ekko
exceptions
program_error = 1
others = 2.
*& Form end_of_list_html
output at the end of the list - not in printed output *
FORM end_of_list_html USING end TYPE REF TO cl_dd_document.
DATA: ls_text TYPE sdydo_text_element,
l_grid TYPE REF TO cl_gui_alv_grid,
f(14) TYPE c VALUE 'SET_ROW_HEIGHT'.
ls_text = 'Footer title'.
adds and icon (red triangle)
CALL METHOD end->add_icon
EXPORTING
sap_icon = 'ICON_MESSAGE_ERROR_SMALL'.
adds test (via variable)
CALL METHOD end->add_text
EXPORTING
text = ls_text
sap_emphasis = 'strong'.
adds new line (start new line)
CALL METHOD end->new_line.
display text(bold)
CALL METHOD end->add_text
EXPORTING
text = 'Bold text'
sap_emphasis = 'strong'.
adds new line (start new line)
CALL METHOD end->new_line.
display text(normal)
CALL METHOD end->add_text
EXPORTING
text = 'Normal text'.
adds new line (start new line)
CALL METHOD end->new_line.
display text(bold)
CALL METHOD end->add_text
EXPORTING
text = 'Yellow triangle'
sap_emphasis = 'strong'.
adds and icon (yellow triangle)
CALL METHOD end->add_icon
EXPORTING
sap_icon = 'ICON_LED_YELLOW'.
display text(normal)
CALL METHOD end->add_text
EXPORTING
text = 'More text'.
*set height of this section
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
e_grid = l_grid.
CALL METHOD l_grid->parent->parent->(f)
EXPORTING
id = 3
height = 14.
ENDFORM. "end_of_list_html.
Regards,
Ameer Baba. -
How to insert horizontal lines in alv report?
hi,
i have to insert horizontal lines in alv report.( RM07MLBB )
actually my requirement is:
basis list = RM07MLBB.
first secondary list = another report is called here ( RM07DOCS )
i want to insert horizontal lines in the first secondary list, when i execute individually RM07DOCS , i can get horizontal lines, but when i dounle click in the basic list --> in the first secondary list , i am not getting the horizontal lnes.
functional modules used are REUSE_ALV_HIERSEQ_LIST_DISPLAY & REUSE_ALV_GRID_DISPLAY.
here in this program,
is_layout = alv_layout.
hence i tried to give
alv_layout-no_hline = ' '.
but not effecting.
can some one please tell me , how to insert lines in the alv report.
thanks in advance,
Dastagir.hello,
so i cannot insert horizontal lines in the first secondary list according to my sorting condition, i.e., in a single block there should be :
if same delivery challan number is repeating they should come in the same block,
for the corresponding delivery challen number, if have po number, is repeating , they also should come in the same block.
in this way i have to seperate the blocks containing EXNUM , EBELN CONDITIONED. -
How to select multiple row in ALV report
Hi friends,
1. How to select multiple row in ALV report
( How to set tab in ALV report and want to select multiple line.)
Thanking you.
SubashHi Sahoo,
If you are using the class CL_GUI_ALV_GRID. In methods SET_TABLE_FOR_FIRST_DISPLAY.
in layout structure you will find field SEL_MODE
pass :
LS_LAYOUT-SEL_MODE = 'A'.
In PAI.
CALL METHOD GRID->GET_SELECTED_ROWS
IMPORTING
ET_INDEX_ROWS = T_ROWS
ET_ROW_NO = T_ROWID.
Hope these will solve your problem.
Regards,
Kumar M. -
How to get header in the ALV report
Hi
I want to print header in the ALV report.But i am not getting that.Plz see my program it is getting error and also not printing header.If there is any error means plz give me the solution.In this program there is an error.
REPORT ZREPORT_ALV .
TYPE-POOLS : slis.
tables:vbak,vbap.
DATA: report_id LIKE sy-repid.
DATA: I_LAYOUT TYPE SLIS_LAYOUT_ALV.
data: heading TYPE slis_t_listheader,
wa_header TYPE slis_listheader,
events TYPE slis_t_event.
data: l_string type c.
data: ivariant(1) type c,
itvariant like disvariant,
w_variant like disvariant.
initialization.
REPORT_ID = SY-REPID.
PERFORM pgm. "F1000_LAYOUT_INIT. "using I_LAYOUT.
ivariant = 'A'.
*PERFORM init.
itvariant = w_variant.
select-options:so_vbeln for vbap-vbeln.
data:itab like vbak occurs 0 with header line.
data:itab1 like vbap occurs 0 with header line.
start-of-selection.
select * from vbak into table itab where vbeln in so_vbeln.
if not itab[] is initial.
select * from vbap into table itab1
for all entries in itab
where vbeln = itab-vbeln.
endif.
data:ls_fieldcat TYPE slis_fieldcat_alv,
lt_fieldcat1 TYPE slis_t_fieldcat_alv.
****For alv display
IF NOT itab1[] IS INITIAL.
DEFINE ls_fieldcat.
add 1 to ls_fieldcat-col_pos.
ls_fieldcat-fieldname = &1.
ls_fieldcat-outputlen = &2.
ls_fieldcat-seltext_l = &3.
ls_fieldcat-emphasize = &4.
append ls_fieldcat to lt_fieldcat1.
clear ls_fieldcat.
END-OF-DEFINITION.
ls_fieldcat 'VBELN' '10' 'Sales Order Number'.
ls_fieldcat 'POSNR' '6' 'SO Item'.
ls_fieldcat 'MATNR' '13' 'Material No'.
m_fieldcat1 'NETWR' '13' 'Amount'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = sy-repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = lt_fieldcat1
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT = ITVARIANT
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = itab1
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endif.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
I_SAVE = ivariant
CHANGING
CS_VARIANT = itvariant
EXCEPTIONS
WRONG_INPUT = 1
NOT_FOUND = 2
PROGRAM_ERROR = 3
OTHERS = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM pgm. "F1000_LAYOUT_INIT. "USING I_LAYOUT TYPE SLIS_LAYOUT_ALV.
CLEAR I_LAYOUT.
i_layout-colwidth_optimize = 'X'.
I_LAYOUT-key_hotspot = u2018Xu2019.
I_LAYOUT-hotspot_fieldname = MATNR.
ENDFORM.
*regarding logo and header,,,,
*first store the logo in T-code OAOR, then call that in your report.....
*data: heading TYPE slis_t_listheader,
wa_header TYPE slis_listheader,
events TYPE slis_t_event.
To display TOP_OF_PAGE.
FORM top_of_page.
DATA : text(40),txtdt(40).
CLEAR l_string.
l_string = 'JCB India Limited'(hd2).
wa_header-typ = 'H'.
wa_header-info = l_string.
APPEND wa_header TO heading. " index 1.
CLEAR l_string.
WRITE :'Number of records:' TO text,'dbcnt' TO text+20 LEFT-JUSTIFIED.
wa_header-typ = 'S'.
wa_header-info = text.
APPEND wa_header TO heading.
CLEAR l_string.
wa_header-typ = 'S'.
WRITE : 'Report Run Date :' TO txtdt,sy-datum TO txtdt+20 DD/MM/YY.
WRITE sy-datum TO dat DD/MM/YY.
wa_header-info = txtdt.
APPEND wa_header TO heading.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
i_logo = 'ENJOYSAP_LOGO'
it_list_commentary = heading.
CLEAR heading.
ENDFORM. "top_of_page
*to execute top-of-page you have to create events.
*for ex......
FORM create_event USING p_events TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = p_events.
READ TABLE p_events WITH KEY name = slis_ev_top_of_page
INTO ls_event.
IF sy-subrc = 0.
MOVE formname_top_of_page TO ls_event-form.
APPEND ls_event TO p_events.
ENDIF.
ENDFORM. " create_eventHi,
Find below code for your question, you may get some idea,,
*& Report ZACTIONGRIDPRACTICE
REPORT ZACTIONGRIDPRACTICE.
*data declarations.....
TYPE-POOLS SLIS.
TABLES : T529T ,PA0000.
data : gd_repid type sy-repid.
DATA : LD_COLOR(10) TYPE N.
DATA : GD_TAB_GROUP TYPE SLIS_T_SP_GROUP_ALV.
Data: is_fieldcat TYPE slis_fieldcat_alv.
DATA : GD_LAYOUT TYPE SLIS_LAYOUT_ALV.
DATA : GD_DATUM TYPE DATUM.
DATA : BEGIN OF WA_TABLE,
MASSN TYPE T529T-MASSN,
MNTXT TYPE T529T-MNTXT,
userg type userg,
TOTAL TYPE I ,
begda type begda,
endda type endda,
april type i,
SLNO TYPE I,
LINE_COLOR(4) TYPE C,
END OF WA_TABLE,
IT_TABLE LIKE TABLE OF WA_TABLE.
data : april type i.
DATA : TEMP TYPE C.
data : LT_PA0000 TYPE TABLE OF PA0000,
LT_PA0000_T typE TABLE OF PA0000 with header line.
DATA : IT_FCAT TYPE SLIS_T_FIELDCAT_ALV,
WA_FCAT LIKE LINE OF IT_FCAT.
DATA : IT_EVENTS TYPE SLIS_T_EVENT,
WA_EVENTS LIKE LINE OF IT_EVENTS.
wa_events-form = 'HEADER'.
WA_EVENTS-NAME = 'TOP_OF_PAGE'.
APPEND WA_EVENTS TO IT_EVENTS.
PERFORM HEADER.
DATA : SLNO TYPE I.
DATA : lv_output TYPE dats.
CALL FUNCTION 'ZHR_RE_BE_CALC_START_DATE'
EXPORTING
id_daberi = sy-datum
IMPORTING
ed_date_cor = lv_output.
select-options...
selection-screen BEGIN OF BLOCK B WITH FRAME TITLE TEXT-003.
select-options : s_date for sy-datum OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B.
lv_output = sy-datum - 27.
INITIALIZATION.
S_DATE-LOW = lv_output.
S_DATE-HIGH = SY-DATUM.
S_DATE-SIGN = 'I'.
S_DATE-OPTION = 'BT'.
APPEND s_date.
*AT SELECTION-SCREEN ON S_DATE.
*SELECT MASSN INTO TABLE IT_TABLE FROM PA0000 WHERE BEGDA IN S_DATE.
*SELECT STATEMENTS....
start-of-selection.
SELECT t529t~MASSN t529t~MNTXT INTO TABLE IT_table FROM T529T where SPRSL EQ 'E' and t529t~massn in ('10','13','16','20','28','30','45','01','03') .
DATUM IN S_DATE.
PERFORM LAYOUT.
loop at it_table into wa_table.
LD_COLOR = 2.
LD_COLOR = LD_COLOR + 1.
if LD_COLOR = 8.
LD_COLOR = 1.
endif.
concatenate 'C' '1' '11' into wa_table-LINE_COLOR . "='C410'.
modify it_table from wa_table.
endloop.
LOOP AT IT_TABLE INTO WA_TABLE." = 'C410'.
select massn from pa0000 into table lt_pa0000 where begda in s_date and massn = wa_table-massn.
*write : / sy-dbcnt. gt s_date-low and endda lt s_date-high
*DESCRIBE TABLE LT_PA0000_t LINES LV_LINES.
move sy-dbcnt to wa_table-total.
READ TABLE lt_pa0000 INTO LT_PA0000_T WITH KEY MASSN = wa_TABLE-MASSN BINARY SEARCH.
DESCRIBE TABLE LT_PA0000_t LINES LV_LINES.
MOVE LV_LINES to wa_TABLE-TOTAL.
MODIFY IT_TABLE FROM WA_TABLE.
MOVE SY-TABIX TO WA_TABLE-SLNO.
MODIFY IT_TABLE FROM WA_TABLE.
REFRESH : LT_PA0000_t.
CLEAR : LV_LINES.
ENDLOOP.
loop at it_table into wa_table.
SELECT MASSN FROM PA0000 INTO TABLE lt_pa0000 where begda between '01.02.2008' and '20.02.2008'.
MOVE SY-DBCNT TO WA_TABLE-APRIL.
MODIFY IT_TABLE FROM WA_TABLE.
*endloop.
*PERFORM STATEMENTS...
PERFORM FCAT USING '1' 'MASSN' 'ACTIONCODE'.
PERFORM FCAT USING '2' 'MNTXT' 'ACTION TYPE'.
PERFORM fcat USING '3' 'TOTAL' 'TOTAL'.
DEFINE m_fieldcat.
is_fieldcat-fieldname = &1.
is_fieldcat-hotspot = &2.
is_fieldcat-seltext_m = &3.
is_fieldcat-col_pos = &4.
is_fieldcat-outputlen = &5.
is_fieldcat-hotspot = &6.
append is_fieldcat to it_fcat.
clear is_fieldcat.
END-OF-DEFINITION.
m_fieldcat 'SLNO' '' Text-012 '1' '17' ''.
m_fieldcat 'MASSN' '' Text-010 '2' '40' ''.
m_fieldcat 'MNTXT' '' Text-009 '3' '50' '' .
m_fieldcat 'TOTAL' '' Text-011 '4' '10' 'X'.
m_fieldcat 'april' '' Text-013 '5' '10' 'X'.
*FOR DISPLAYING THE RECORDS...
gd_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = gd_repid
IS_LAYOUT = GD_LAYOUT
I_CALLBACK_USER_COMMAND = ' '
I_GRID_TITLE = 'REPORT'
IS_LAYOUT = gd_LAYOUT
IT_FIELDCAT = IT_FCAT
I_SAVE = 'X'
IT_EVENTS = IT_EVENTS
TABLES
T_OUTTAB = IT_TABLE.
**& Form FCAT
*FORM FCAT USING FP_COL_POS
FP_FIELDNAME
FP_SELTEXT_M.
WA_FCAT-COL_POS = FP_COL_POS.
WA_FCAT-FIELDNAME = FP_FIELDNAME.
wa_fcat-seltext_m = fp_seltext_m.
APPEND WA_FCAT TO IT_FCAT.
ENDFORM.
*& Form HEADER
text
--> p1 text
<-- p2 text
form header .
DATA : IT_HEADER TYPE SLIS_T_LISTHEADER,
WA_HEADER LIKE LINE OF it_header.
WA_HEADER-TYP = 'H'.
WA_HEADER-INFO = 'ACTION TYPE REPORT'.
APPEND WA_HEADER TO IT_HEADER.
wa_header-typ = 'S'.
wa_header-key = Text-022.
CONCATENATE s_date-low+6(2) '.'
s_date-low+4(2) '.'
s_date-low(4)
temp
'. TO .'
s_date-high+6(2) '.'
s_date-high+4(2) '.'
s_date-high(4)
INTO wa_header-info SEPARATED BY space.
APPEND wa_header TO it_header.
CLEAR wa_header.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_HEADER
I_LOGO = 'HRRU_51050061'.
*select single bstkd into CORRESPONDING FIELDS OF gt_vbkd
*from vbkd where vbeln = rt_outtab-vgbel
*and posnr = '000000'.
*rt_outtab-bstkd = gt_vbkd-bstkd.
ENDFORM. " HEADER
*& Form LAYOUT
text
--> p1 text
<-- p2 text
FORM LAYOUT .
GD_LAYOUT-NO_INPUT = ''.
gd_layout-colwidth_optimize = ''.
gd_layout-totals_text = 'TOTALS'(201).
gd_layout-info_fieldname = 'LINE_COLOR'.
ENDFORM. " LAYOUT -
How to create check box in ALV Reports?
how to create check box in ALV Reports?
Hi
check the report BCALV_TEST_GRID_EDITABLE
or
check this report
REPORT ZRFC346_TST.
TABLES:SFLIGHT,RL034.
TYPE-POOLS:SLIS.
INCLUDE:<ICON>,<SYMBOL>.
DATA: G_REPID LIKE SY-REPID,
G_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
G_IT_SORT TYPE SLIS_T_SORTINFO_ALV,
G_LAYOUT TYPE SLIS_LAYOUT_ALV,
G_TABNAME_HEADER TYPE SLIS_TABNAME,
G_TABNAME_ITEM TYPE SLIS_TABNAME,
G_KEYINFO TYPE SLIS_KEYINFO_ALV,
G_VARIANT LIKE DISVARIANT,
G_EXTAB TYPE SLIS_T_EXTAB,
I_SLIS_EXIT_BY_USER TYPE SLIS_EXIT_BY_USER.
DATA: XEVENT TYPE SLIS_T_EVENT,
AEVENT TYPE SLIS_ALV_EVENT,
VARIANT LIKE DISVARIANT,
LAYOUT TYPE SLIS_LAYOUT_ALV,
ASP_GROUP TYPE SLIS_SP_GROUP_ALV,
GT_SP_GROUP TYPE SLIS_T_SP_GROUP_ALV,
EXTAB TYPE SLIS_T_EXTAB WITH HEADER LINE,
XFIELD TYPE SLIS_T_FIELDCAT_ALV,
AFIELD TYPE SLIS_FIELDCAT_ALV,
G_SUCOMM LIKE SY-UCOMM,
G_SELFLD TYPE SLIS_SELFIELD.
DATA: SAV_SY_REPID LIKE SY-REPID.
CONSTANTS: CON_SFLIGHT TYPE LVC_FNAME VALUE 'SFLIGHT',
CON_DISPLAY_FULL TYPE I VALUE 3.
Data to be displayed
DATA: BEGIN OF GT_SFLIGHT OCCURS 0.
INCLUDE STRUCTURE SFLIGHT.
DATA:ACTIVATE(1).
DATA: END OF GT_SFLIGHT.
INITIALIZATION.
*........Initialisierung...............................................
PERFORM INITIALIZATION_RL034.
*........Field cata....................................................
PERFORM FIELD_CAT.
*........SPECIAL GROUP.................................................
PERFORM E07_SP_GROUP_BUILD USING GT_SP_GROUP[].
START-OF-SELECTION.
Selection
SELECT * FROM SFLIGHT INTO TABLE GT_SFLIGHT.
*........ALV CALL.......................................................
PERFORM ALV_CALL.
PERFORM USER_COMMAND_LOCAL USING G_SUCOMM G_SELFLD.
FORM USER_COMMAND_LOCAL *
--> G_UCOMM *
--> G_SELFIELD *
FORM USER_COMMAND_LOCAL USING G_UCOMM LIKE SY-UCOMM
G_SELFIELD TYPE SLIS_SELFIELD.
CASE G_UCOMM.
WHEN 'ACT'.
ENDCASE.
ENDFORM.
FORM ALV_CALL *
FORM ALV_CALL.
Call ABAP List Viewer (ALV)
G_LAYOUT-BOX_FIELDNAME = 'ACTIVATE'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_BACKGROUND_ID = 'ALV_BACKGROUND'
I_BYPASSING_BUFFER = SPACE
I_BUFFER_ACTIVE = SPACE
I_CALLBACK_PROGRAM = SAV_SY_REPID
I_CALLBACK_PF_STATUS_SET = 'STATUS'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND_LOCAL'
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME = 'SFLIGHT'
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = G_LAYOUT
IT_FIELDCAT = XFIELD[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS = GT_SP_GROUP[]
IT_SORT =
IT_FILTER =
IS_SEL_HIDE = 'X'
I_DEFAULT = 'X'
I_SAVE = 'A'
IS_VARIANT =
IT_EVENTS = XEVENT
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_ADD_FIELDCAT =
IT_HYPERLINK =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IT_EXCEPT_QINFO =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = GT_SFLIGHT
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
FORM status *
--> EXTAB *
FORM STATUS USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'STAT' EXCLUDING EXTAB.
ENDFORM. " STATUS
*& Form INITIALIZATION_RL034
text
--> p1 text
<-- p2 text
FORM INITIALIZATION_RL034.
SAV_SY_REPID = SY-REPID.
ENDFORM. " INITIALIZATION_RL034
*& Form DEFINE_EVENTS_RL034
text
--> p1 text
<-- p2 text
FORM DEFINE_EVENTS_RL034.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = XEVENT.
exceptions
list_type_wrong = 1
others = 2.
ENDFORM. " DEFINE_EVENTS_RL034
*& Form FIELD_CAT
text
--> p1 text
<-- p2 text
FORM FIELD_CAT.
DATA: LS_FCAT TYPE SLIS_FIELDCAT_ALV,
L_LIN TYPE I.
REFRESH XFIELD.
1. per Default eingeblendete Felder *
*........Ikone/Symbol..................................................
CLEAR AFIELD.
DATA: LS1_FCAT TYPE SLIS_FIELDCAT_ALV,
L_LIN1 TYPE I.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_STRUCTURE_NAME = CON_SFLIGHT
I_BYPASSING_BUFFER = SPACE
I_BUFFER_ACTIVE = SPACE
CHANGING
CT_FIELDCAT = XFIELD
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3.
DESCRIBE TABLE XFIELD LINES L_LIN1.
ADD 1 TO L_LIN1.
CLEAR LS_FCAT.
LS1_FCAT-FIELDNAME = 'ACTIVATE'.
LS1_FCAT-CHECKBOX = 'X'.
LS1_FCAT-KEY = 'X'.
LS1_FCAT-INPUT = 'X'.
LS1_FCAT-EDIT = 'X'.
LS1_FCAT-INTTYPE = 'C'.
LS1_FCAT-DATATYPE = 'CHAR'.
LS1_FCAT-INTLEN = 1.
LS1_FCAT-COL_POS = L_LIN1.
LS1_FCAT-SELTEXT_S = LS1_FCAT-FIELDNAME.
LS1_FCAT-SELTEXT_M = LS1_FCAT-FIELDNAME.
LS1_FCAT-SELTEXT_L = LS1_FCAT-FIELDNAME.
LS1_FCAT-SP_GROUP = 'A'.
APPEND LS1_FCAT TO XFIELD.
ADD 1 TO L_LIN.
ENDFORM. " FIELD_CAT
FORM E07_SP_GROUP_BUILD USING E07_LT_SP_GROUP TYPE SLIS_T_SP_GROUP_ALV.
DATA: LS_SP_GROUP TYPE SLIS_SP_GROUP_ALV.
CLEAR LS_SP_GROUP.
LS_SP_GROUP-SP_GROUP = 'A'.
LS_SP_GROUP-TEXT = 'SPECIAL'.
APPEND LS_SP_GROUP TO E07_LT_SP_GROUP.
ENDFORM.
Regards
Shiva -
Hi Experts ,
Could you suggest if we can use traffic lights in ALV tree Display and if possible program(T-code ) you have gone thorugh.
I already checked BCALV_TREE_06 , its totally different just showing icons .
Regards,
Karan
Edited by: Karan_Chowdary on Dec 24, 2011 7:28 AMFirst in your output table for ALV.. add the light coloum.
for example:
DATA: BEGIN OF IMARA OCCURS 0,
LIGHT(4) TYPE C,
MATNR TYPE MARA-MATNR,
MTART TYPE MARA-MTART,
MAKTX TYPE MAKT-MAKTX,
COLOR_LINE(4) TYPE C,
TCOLOR TYPE SLIS_T_SPECIALCOL_ALV, "cell
END OF IMARA.
Then in the get data section, you have to put if-else class and upate that column as follows
WRITE ICON_GREEN_LIGHT AS ICON TO IMARA-LIGHT.
The use that light column in the catalog section
Regards,
Venkat -
How to handle interactive list in alv reports
hi experts.
how to handle interactive list in alv reports.
regards.
subhasisHI Subhasis,
below is the sample code for handling an interactive ALV report, hope this helps you ..
REPORT ZTEST_ALV123.
TYPE-POOLS:SLIS.
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
IT_FIELDCAT1 TYPE SLIS_T_FIELDCAT_ALV.
DATA: BEGIN OF ITAB OCCURS 0,
VBELN LIKE VBAK-VBELN,
POSNR LIKE VBAP-POSNR,
END OF ITAB.
DATA: BEGIN OF ITAB1 OCCURS 0,
VBELN LIKE LIKP-VBELN,
POSNR LIKE LIPS-POSNR,
VGBEL LIKE LIPS-VGBEL,
VGPOS LIKE LIPS-VGPOS,
END OF ITAB1.
DATA: IT_LIPS LIKE ITAB1 OCCURS 0 WITH HEADER LINE.
SELECT VBELN
POSNR
FROM VBAP
INTO TABLE ITAB.
IF SY-SUBRC = 0.
SORT ITAB BY VBELN .
SELECT VBELN
POSNR
VGBEL
VGPOS
INTO TABLE ITAB1
FROM LIPS
FOR ALL ENTRIES IN ITAB
WHERE VGBEL = ITAB-VBELN
AND VGPOS = ITAB-POSNR.
ENDIF.
DATA: X_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
X_FIELDCAT-FIELDNAME = 'VBELN'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 1.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'POSNR'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 1.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'PFSTATUS'
I_CALLBACK_USER_COMMAND = 'HANDLE_USER_COMMAND'
IT_FIELDCAT = IT_FIELDCAT
TABLES
T_OUTTAB = ITAB
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC = 0.
ENDIF.
*& Form POPUP
text
-->P_EXTAB text
FORM POPUP USING P_EXTAB TYPE SLIS_T_EXTAB.
"here double click on PFSTATUS and create the status, "activate, before that set PICK for choose(F2).
*- Pf status
SET PF-STATUS 'PFSTATUS'.
ENDFORM. " POPUP
*& Form HANDLE_USER_COMMAND
text
-->R_UCOMM text
-->RS_SELFIELD text
FORM HANDLE_USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN '&IC1'.
IF RS_SELFIELD-FIELDNAME = 'VBELN'.
READ TABLE ITAB INDEX RS_SELFIELD-TABINDEX.
LOOP AT ITAB1 WHERE VGBEL = ITAB-VBELN
AND VGPOS = ITAB-POSNR.
MOVE-CORRESPONDING ITAB1 TO IT_LIPS.
APPEND IT_LIPS.
ENDLOOP.
PERFORM INTERACTIVE_REPORT.
ENDIF.
ENDCASE.
ENDFORM. "HANDLE_USER_COMMAND
*& Form interactive_report
text
FORM INTERACTIVE_REPORT .
X_FIELDCAT-FIELDNAME = 'VBELN'.
X_FIELDCAT-SELTEXT_L = 'VBELN'.
X_FIELDCAT-TABNAME = 'IT_LIPS'.
X_FIELDCAT-COL_POS = 1.
APPEND X_FIELDCAT TO IT_FIELDCAT1.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'POSNR'.
X_FIELDCAT-SELTEXT_L = 'ITEM'.
X_FIELDCAT-TABNAME = 'IT_LIPS'.
X_FIELDCAT-COL_POS = 2.
APPEND X_FIELDCAT TO IT_FIELDCAT1.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'VGBEL'.
X_FIELDCAT-SELTEXT_M = 'SO #'.
X_FIELDCAT-TABNAME = 'IT_LIPS'.
X_FIELDCAT-COL_POS = 3.
APPEND X_FIELDCAT TO IT_FIELDCAT1.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'VGPOS'.
X_FIELDCAT-SELTEXT_M = 'SO ITEM'.
X_FIELDCAT-TABNAME = 'IT_LIPS'.
X_FIELDCAT-COL_POS = 4.
APPEND X_FIELDCAT TO IT_FIELDCAT1.
CLEAR X_FIELDCAT.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IT_FIELDCAT = IT_FIELDCAT1
TABLES
T_OUTTAB = IT_LIPS
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC = 0.
ENDIF.
ENDFORM. " interactive_report
Regards,
Ranjita
null -
How to use intractive list in Alv REPORT
how to use intractive list in Alv REPORT with example.
thangs
venki.......Hi
using the USER_COMMAND we can move to the Secondary(interactive) list in the ALV
see the sample code
report yh645_secndry_alv.
type-pools: slis.
data: fieldcat type slis_t_fieldcat_alv,
fieldcat_ln like line of fieldcat,
fs_layout type slis_layout_alv,
t_layoout like standard table
of fs_layout.
data: begin of fs_spfli,
carrid type spfli-carrid,
connid type spfli-connid,
countryfr type spfli-countryfr,
cityfrom type spfli-cityfrom,
airpfrom type spfli-airpfrom,
countryto type spfli-countryto,
cityto type spfli-cityto,
airpto type spfli-airpto,
fltime type spfli-fltime,
deptime type spfli-deptime,
arrtime type spfli-arrtime,
distance type spfli-distance,
distid type spfli-distid,
fltype type spfli-fltype,
period type spfli-period,
checkbox,
color(3),
end of fs_spfli.
data:
begin of fs_table,
carrid type spfli-carrid,
connid type spfli-connid,
end of fs_table.
data: begin of fs_sflight,
check,
color(3).
include type sflight.
data:end of fs_sflight.
data:
begin of fs_table1,
carrid type sflight-carrid,
connid type sflight-connid,
fldate type sflight-fldate,
end of fs_table1.
data:
t_spfli like standard table
of fs_spfli.
data:
t_table like standard table
of fs_table.
data:
t_table1 like standard table
of fs_table1.
data:
t_sflight like standard table
of fs_sflight.
data:
t_sbook like standard table
of sbook.
data t_layout type slis_layout_alv.
select *
into corresponding fields of table t_spfli
from spfli.
perform start_list_viewer.
perform get_spfli_details.
*& Form SUB1
text
-->RT_EXTAB text
form sub1 using rt_extab type slis_t_extab.
data: flight type slis_extab.
flight-fcode = 'SFLIGHT'.
append flight to rt_extab.
set pf-status 'SFLIGHT'. " EXCLUDING RT_EXTAB.
endform. "SUB1
*& Form START_LIST_VIEWER
text
--> p1 text
<-- p2 text
form start_list_viewer .
data: pgm like sy-repid.
pgm = sy-repid.
fs_layout-box_fieldname = 'CHECKBOX'.
fs_layout-info_fieldname = 'COLOR'.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = pgm
i_callback_pf_status_set = 'SUB1'
i_callback_user_command = 'USER_COMMAND'
i_structure_name = 'SPFLI'
is_layout = fs_layout
tables
t_outtab = t_spfli
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " START_LIST_VIEWER
*******Process Call Back Events (Begin)**************************
form user_command using ucomm like sy-ucomm
selfield type slis_selfield.
case ucomm.
when 'SFLIGHT'.
selfield-refresh = 'X'.
perform get_spfli_details.
select *
from sflight
into corresponding fields of table t_sflight
for all entries in t_table
where carrid eq t_table-carrid
and connid eq t_table-connid.
perform display_sflight.
when 'SBOOK'.
selfield-refresh = 'X'.
perform get_sflight_details.
select *
from sbook
into corresponding fields of table t_sbook
for all entries in t_table1
where carrid eq t_table1-carrid
and connid eq t_table1-connid
and fldate eq t_table1-fldate.
perform display_sbook.
endcase.
endform. "USER_COMMAND
*& Form SUB2
text
-->RT_EXTAB text
form sub2 using rt_extab type slis_t_extab.
data: flight type slis_extab.
flight-fcode = 'SBOOK'.
append flight to rt_extab.
set pf-status 'SBOOK'. " EXCLUDING RT_EXTAB.
endform. "SUB2
*& Form DISPLAY_SFLIGHT
text
--> p1 text
<-- p2 text
form display_sflight .
data: pgm like sy-repid.
pgm = sy-repid.
clear t_layout.
fs_layout-box_fieldname = 'CHECK'.
fs_layout-info_fieldname = 'COLOR'.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = pgm
i_callback_pf_status_set = 'SUB2'
i_callback_user_command = 'USER_COMMAND'
i_structure_name = 'SFLIGHT'
is_layout = fs_layout
tables
t_outtab = t_sflight
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_SFLIGHT
*& Form GET_SPFLI_DETAILS
text
--> p1 text
<-- p2 text
form get_spfli_details .
loop at t_spfli into fs_spfli.
if fs_spfli-checkbox = 'X'.
fs_spfli-color = 'C51'.
fs_spfli-checkbox = '1'.
fs_table-carrid = fs_spfli-carrid.
fs_table-connid = fs_spfli-connid.
append fs_table to t_table.
modify t_spfli from fs_spfli.
endif.
endloop.
endform. " GET_SFLIGHT_DETAILS
*& Form GET_SFLIGHT_DETAILS
text
--> p1 text
<-- p2 text
form get_sflight_details .
loop at t_sflight into fs_sflight.
if fs_sflight-check = 'X'.
fs_sflight-color = 'C71'.
fs_sflight-check = '1'.
fs_table1-carrid = fs_sflight-carrid.
fs_table1-connid = fs_sflight-connid.
fs_table1-fldate = fs_sflight-fldate.
append fs_table1 to t_table1.
modify t_sflight from fs_sflight.
endif.
endloop.
endform. " GET_SFLIGHT_DETAILS
*& Form DISPLAY_SBOOK
text
--> p1 text
<-- p2 text
form display_sbook .
data: pgm like sy-repid.
pgm = sy-repid.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = pgm
i_structure_name = 'SBOOK'
tables
t_outtab = t_sbook
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_SBOOK
Reward points for useful Answers
Regards
Anji -
Custom traffic lighting with Interactive Reporting
Has anyone written a custom javascript solution for cell-based traffic lighting in Interactive Reports? It does not appear that the object model gives access to cell-level properties in either the pivot or OLAPquery objects although spotlighting can be applied to individual columns and rows.
Oh yes, understand perfectly what you want, sighing...
I planned to write another blog post about reporting partial scores, but since Posterous closed down in March, I am not blogging any more, just paying to keep the old posts online on demand of a lot of users. There are several reasons for that, which I will not explain but it is mainly because I feel really exploited.
Two possiblities:
Using the mastery widget of InfoSemantics (but limited to SWF-output)
Using JavaScript
Lilybiri
Maybe you are looking for
-
Each time I repair permissions I get the following message, and don't understand what it means, and why it can't be repaired. Is this a sign of the HD going bad, should I be concerned about this file? My iMac was purchased in Oct 2007. 2GHz Intel Cor
-
E-Mail in Office 2010 mit Hilfe von Visual Basic speichern bzw. generieren
Sehr geehrte Damen und Herren, wie bzw. mit welchem Code kann ich unter "AdobePDFMakerForOffice" unter Visual Basic eine E-Mail als PDF einschl. des Anhang abspeichern bzw. generieren ? Interessant ist dann noch die Angabe eines individuellen Datein
-
Recording of temperature, power and speed at the time of confirmation
Hi experts, My client requires to record the temperature,power and speed of the equipment while doing the phase wise confirmation. I'm planning to put inspection characteristics for the operations. I'm not going to use PI sheet. Is this inspection ch
-
Forms jdapi and attached libraries
using Jdapi to manipulate forms is an exciting experience, especially, when misterious things happen i wrote a simple code to list all the attached libraries (the reason for that is i want to migrate Forms application from Windows env to Unix and i w
-
I accidentally deleted the Safari icon on my iPhone. How do I get it back??