How to profile performance on device?

How is this done? Was there a way to show a border around the areas that are being redrawn? android and/or iOS
I am using flash cs5.5

Profiling comes in many flavors...
- Load Capacity => load test... there are some (slightly outdated) load test templates that you can use to slam your SP environment and determine its load capacity
- Average usage => performance monitors... use the built in performance monitors, or some dedicated systems (like MS System Center) include application-specific capabilities (System Center has Management Packs)
- Solution Profiling => performance profilers... a bit harder, since it requires isolating the custom components and comparing data... use the SP dev tools, SQL profiles, logs, etc.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

Similar Messages

How To Profile Performance Before & After Installation Of A Solution

Hi.
We have third party and custom solutions that we want to install into our SharePoint 2010 Farm.
We want to find out if there are any performance bottlenecks after the installation so we would like to profile our SharePoint 2010 Farm performance and SQL Server 2008 R2 performance before and after.
How could we achieve this profile for our Farm overall and both SharePoint 2010 and SQL Server 2008 R2?

Profiling comes in many flavors...
- Load Capacity => load test... there are some (slightly outdated) load test templates that you can use to slam your SP environment and determine its load capacity
- Average usage => performance monitors... use the built in performance monitors, or some dedicated systems (like MS System Center) include application-specific capabilities (System Center has Management Packs)
- Solution Profiling => performance profilers... a bit harder, since it requires isolating the custom components and comparing data... use the SP dev tools, SQL profiles, logs, etc.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

HT1766 I have the latest version of iTunes. When I plug my iPhone into the computer, it never comes up under the "Devices" tab in iTunes. How can I perform a restore/backup if it won't come up under "Devices" ?

I have the latest version of iTunes. When I plug my iPhone into the computer, it never comes up under the "Devices" tab in iTunes. How can I perform a restore/backup if it won't come up under "Devices" ?

See:
iPhone not recognized in iTunes for Mac
iPhone not recognized in iTunes for Windows

How to deploy settings in Profile Manager through Device Groups

When I go to the Profile Manager web page and create a device group and configure the payload settings it doesn't seem to send the profile settings to the Mac devices that are in the group. How do I go about getting this to work so when I get a new device that is enrolled all I have to do is throw it in the group so it will automatically push out the correct payload settings that I configured?

What you're asking should work. You should be able to create a Device Group and adjust the setting for that group. Then when you add a device to that group, the settings will be pushed to the device automatically. So, it leaves me with a few questions for you:
Why don't you think it sends the payload? When you look under "Activity" do you see tasks in the "Active" area or in the "Completed" area... or something else?
What are you trying to change? Setting up email accounts on iPhones will appear right away, but there are other changes (especially on computers) that don't take affect until it restarts (or the user at least logs out and back in).
Are you sure you have devices in your device group? Sorry, probably a really silly question, but under your device group, do you see the devices under the "Members" section?
Are your devices "trusting" your server? Did you add the trust profile to the device when you enrolled it?
Sorry I can't be more help... but I can tell you that you can do what you are asking. We have it set up in our office, and it works really well. We just add the new device to the device group and it does the rest.

How do I perform a "Suite Product Activation" so that Acrobat will start working on my new Retina MacBook Pro?

How do I perform a "Suite Product Activation" so that Acrobat will start working on my new Retina MacBook Pro?
Like others, I have recently upgraded my MacBook Pro to the next generation and migrated all my information from old to new. Everything works seamlessly EXCEPT Acrobat. Photoshop, Indesign, Bridge and Lightroom all seem functional. Acrobat hangs with an error message "Suite Product Activation Needed. Acrobat was installed as part of a suite. To enable Acrobat, please start another element of the suite (such as Photoshop)." Needless to say, starting another element of the suite has NO impact on Acrobat.
This has to be a common problem. Now that Apple has made it really easy to migrate information from old to new machines, it has to come up all the time. What surprises me greatly is that I can't find any coherent answer in these forums.
So how do I get Acrobat running again?

Hi Anubha,
I do not understand what you said below.
I am running Adobe Acrobat Pro Version 9.5.5. I do not remember whether it came with Photoshop or InDesign.
When I open Photoshop, it opens without my having to follow any instructions to activate the software. As a matter of fact, I cannot find my Photoshop serial number anywhere in the Photoshop program itself. I do know it from my profile at Adobe.com. Are you suggesting I deactivate Photoshop on the new computer and then reactivate it using my serial number? Will it reactivate?
When you say
"/Library/Application Support/Adobe" at the root level of the startup disk (not the Library folder inside a user's Home folder)
what do you mean? I do not have a startup disk. I have the original installation disk but that version of Photoshop has been updated a few times.
After staring at your instructions for a while, I realized that you might be talking about the Library/Application Support folders resident on my Macintosh HD, although why you called it a startup disk is unclear to me. IAC, I went into those folders and duly moved the three folders into a new folder I called “Acrob1” and restarted Adobe Acrobat 9 and got the following error message: “AMT Subsystem Failure The licensing subsystem has failed catastrophically. You must reinstall of call customer support.” with a small (6).
By undoing my actions I am back to the staus quo ante.
Now what?
Regards, Robert

I Phone 4S. I am unable to update the software. Evidently my I Mac ( 10.4) will not allow or support the sw update. How can I update this device? The phone function is not currently working either. HELP ! at t

I am unable to update my I Phone 4s through I-Tunes. I believe its due to my antiquated 10.4 operating system on my 2005 I Mac. How can I perform the software update. Currently even the phone function will not work . I'm a novice with this device.

Whatever version of Leopard you purchase, I suggest updating it to 10.5.8 which should have everything you require. To update Leopard download and install Mac OS X 10.5.8 Combo Update. Alternatively, open Software Update and install all the recommended updates. That will include the above updater.
To update your phone:
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS to Version 6.0.x from iOS 5
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
     c. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

Profile Performance in LabVIEWvs Performance meter in Vision Assistant: Doesn't match

Hi everyone,
I faced a strange problem about performance timing between these two measurements.
Here is my test
-used inbuilt example provided by labview in vision assistant-Bracket example-Uses two pattern matches, one edge detection algorithm and two calipers(one for calculating midpoint and other for finding angle between three points.
-When i ran the script provided by NI for the same in vision assistnat it took average inspection time of 12.45ms(even this also varies from 12-13ms:my guess is this little variation might be due to my cpu/processing load).
-Then i converted the script to vi and i used profile performance in labview and surprisingly it is showing way more than expected like almost ~300ms(In the beginning thought it is beacuse of all rotated search etc..but none of them make sense to me here).
Now my questions are
-Are the algorithms used in both tools are same? (I thought they are same)
-IMAQ read image and vision info is taking more than 100ms in labview, which doesn't count for vision assistant. why?( thought the template image might be loaded to cache am i right?)
-What about IMAQ read file(doesn't count for vision assistant?? In labview it takes around 15ms)
-Same for pattern match in vision assitant it takes around 3ms(this is also not consistant) in labview it takes almost 3times (around 15ms)
-Is this bug or am i missing somethings or this is how it is expected?
Please find attachments below.
-Vision Assistant-v12-Build 20120605072143
-Labview-12.0f3
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13
Attachments:
Performance_test.zip ‏546 KB

Hmm Bruce, Thanks again for reply.
-When i first read your reply, i was ok. But after reading it multiple times, i came to know that you didn't check my code and explanation first.
-I have added code and screenshot of Profile in both VA and LabVIEW.
In both Vision Assistant and Labview
-I am loading image only once.
Accounted in Labview but not in VA, because it is already in cache, But time to put the image into cache?
I do understand that, when we are capturing the image live from camera things are completely different.
-Loading template image multiple times??
This is where i was very much confused. Beacuase i didn't even think of it. I am well aware of that task.
-Run Setup Match Pattern once?
Sorry, so far i haven't seen any example which does pattern match for multiple images has Setup Match Pattern everytime. But it is negligible time i wouldn't mind.
-Loading images for processing and loading diffferent template for each image?
You are completely mistaken here and i don't see that how it is related to my specific question.
Briefly explaining you again
-I open an image both in LabVIEW and VA.
-Create two pattern match steps. and Calipers(Negligible)
-The pattern match step in VA shows me longest time of 4.65 ms where as IMAQ Match pattern showed me 15.6 ms.
-I am convinced about IMAQ Read and vision info timing, because it will account only in the initial phase when running for multiple image inspection.
But i am running for only once, then Vision assistant should show that time also isn't it?
-I do understand that, Labview has lot more features on paralell execution and many things than Vision Assistant.
-Yeah that time about 100ms to 10ms i completely agree. I take Vision Assistant profile timing as the ideal values( correct me if i am wrong).
-I like the last line especially, You cannot compare the speeds of the two methods.
Please let me know if i am thinking in complete stupid way or at least some thing in right path.
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13

Can't use profiler (Performance Analyzer) in Sun Studio 12, please help!!

Hi,
I've mandriva 2008 (linux), and I've installed Sun Studio 12.
At the first start of Sun Studio a message appear:
Warning - could not install some modules:
     ATD Sun Studio Core - The module named com.sun.tools.swdev.toolscommon was needed and not found.
     dbx Debugger UI - The module named com.sun.tools.swdev.toolscommon was needed and not found.
     ATD Performance Analyzer Actions - The module named com.sun.forte.st.mpmt/1 was needed and not found.
     ATD Performance Analyzer Actions - The module named com.sun.tools.swdev.toolscommon was needed and not found.
All other modules works correctly, but unfortunately I need the profiler (performance analyzer) because I want to speed up my C++ code. What can I do???
Please help!
NOTE:
I've added to my .bash_profile this lines:
PATH=/opt/sun/sunstudio12/bin:$PATH
export PATH
PATH=/opt/sun/sunstudio12/man/:$PATH
export PATH
LD_LIBRARY_PATH=/opt/sun/sunstudio12/prod/lib
export LD_LIBRARY_PATH
but unfortunately this don't solve the problem....
Edited by: MLX82 on Feb 1, 2008 11:24 PM

If I type `uname -p` this message appear:
[mlx@localhost ~]$ `uname -p`
bash: Intel(R): command not foundIf I type: --userdir won't work as you can see:
sunstudio --userdir /home/mlx/.sunstudio/12.0-Linux-Intel$R$\ Pentium$R$\ M\ processor\ 1.73GHz/I get an 426 line error (but this is the correct location, as man of sunstudio say), while if I type for example:
sunstudio --userdir /home/mlx/error 426 disappears, but I get anyway the error on the module:
Warning - could not install some modules:
     ATD Performance Analyzer Actions - The module named com.sun.forte.st.mpmt/1 was needed and not found.
     ATD Performance Analyzer Actions - The module named com.sun.tools.swdev.toolscommon was needed and not found.
     dbx Debugger UI - The module named com.sun.tools.swdev.toolscommon was needed and not found.
     ATD Sun Studio Core - The module named com.sun.tools.swdev.toolscommon was needed and not found.On the other hand I've searched the "id" exe and it is in /bin:
[mlx@localhost ~]$ id
uid=500(mlx) gid=500(mlx) gruppi=500(mlx)so I've created a sym link:
cd /usr/bin
ln -s /bin/id ./idbut when I start Sun Studio 12 I get again the error on the module.
So I've tryed to reinstall everything (yes, also OS) but it (partially) solves only the problem installing with batch_installer. Infact now I can use batch_installer but at the end of installation it say:
[root@localhost tmp]# ./batch_installer --accept-sla
Installation failed: cleanup successful.Anyway SunStudio 12 still works, but the main problem about the module of performance analyzer is still here...
how can I solve this? Please help!
Edited by: MLX82 on Feb 4, 2008 3:19 PM

How to remove unused Sync devices?

If some Firefox profile gets deleted, the Sync device still remains on the server and there is no apparent way to decommission it. How can one manage sync devices to remove the unused ones?

Solved by doing as described here http://apple.stackexchange.com/a/150979 .

HT4539 How do ypu perform the "IOS update" required to get ringtones on my cell?

How do I perform the "IOS update" required to get ringtones on my cell? I can't figure it out through the ITunes store....

Welcome to the Apple community.
If an update is available for your device, connect it to iTunes and use the update feature.
However, you do not need to update your device in order to use ringtones. Simply select the ringtones you wish to sync to your device from the Tones tab in iTunes on your computer when your device is connected to it, and perform a sync.

How do I perform maintenance on my iMac SSD Drive so I can extend it's life

I recently purchased a Mid 2011 27" 3.4GHZ i7 /16GB Memory iMac and would like to know how do I perform maintenance on my iMac SSD Drive so I can extend it's life, Does apple now support Trimm or is there some thing else I need to do? Defrag? I do not store anything thing but OS and APPS on the drive
thanks

There is nothing you need to do to the SSD. Do not attempt to defrag an SSD as there is no need and uses the device excessively. TRIM is supported only if the SSD is an Apple device so if you reformat the SSD there's no need to Zero Data for garbage collection.

How many paired and active devices will bluetooth on IPad 3 support at a time ?

How many (Paired and Active devices) will Bluetooth on the Ipad 3 sopport at a time?

Actually that is not quite true. Bluetooth is limited to one connection per device profile. That is to say you cannot have two bluetooth headsets actively connected at the same time, but you could have a bluetooth headset and a heart rate monitor, as the hrt monitor and the headset would be using different profiles.

How Is Profile Manager Data Backed Up?

Hello,
I am new to Profile Manager and I like the mobile device managment features.
I can't seem to find any information on how the profiles are backed up.
When using Workgroup Manager, my settings were backed up in Open Directory and then replicated to secondary server I had set up as a replica. Does anyone know how Profile Manager Data is backed up?
Thanks,
Ray

Profile Manager data is stored in PostgreSQL. If you use Time Machine, the databases are dumped every 24 hours. If you don't use Time Machine, you can manually dump the devicemgr database in case you need to restore in the future.
More info on doing that here: http://krypted.com/iphone/backing-up-and-reindexing-the-profile-manager-database -in-lion-server/

Profile performance of a VI using DLL

Hi,
Looking out for some suggestions as we are working on a VI that is calling ActiveX DLL. We want to check performance of that VI, so using Profile Performance And MEmeory tool available in LabVIEW8.6, but the result seems to be incorrect as we are getting much lesser time spent in the report compared to find out by ourself.
Please suggest me if things works in the same way.
Thanks in Advance,
Vivek

I recommend taking the simple approach - put a millisecond timer function before and after the call to the DLL, and subtract. I suspect that CLFNs do not appear in the profiler because LabVIEW hands off execution to the DLL and can't monitor the internals of what the DLL is doing. LabVIEW has no way to know how much memory the DLL allocates nor how much processor time the DLL uses.

How do I associate a device with my Apple ID?

I have an iPad and an iPhone. I sync them with my iMac desktop computer, and never with any other. I always use the same Apple ID. As far as I know, it's the only one I have.
Recently, I purchased an app using my iPad. The next time I synced the iPad with the computer, I got an alert saying "The purchased item 'App' on the iPad
'Etchemendy's iPad' could not be transferred to your iTunes library because you are not authorized for it on this computer." The alert goes on, in fine print, to say, "To authorize this computer for items purchased from the iTunes Store, choose Store > Authorize This Computer."
So I choose Store > Authorize This Computer, and I get a second alert saying, "This computer is already authorized." A nifty little continuous loop that neatly precludes me from using the app on any device except the one I used to purchase it.
But it gets better. In stumbling around trying to figure out what's going on here, I accessed "My Account" using iTunes on my desktop computer (logging in with the same Apple ID I used to purchse the troublesome app). When I click "Manage Devices," I arrive at a box that says, "These computers and devices are associated with your Apple ID for Automatic Downloads or to download previously purchased music, apps, and books..." It then gives me a "list" showing just one device -- my iPhone. The iPad is not shown here. Neither is the desktop computer iTunes just told me is already authorized. There's a button that says "Remove" next to the iPhone. And two bigger buttons. One says "Cancel" and the other says "Done." There is no "add a device" option.
So how to I associate a device with my Apple ID? And, as a matter of fact, why aren't all the devices I registered using my Apple ID already associated with it? I never had any of these problems till the big iOS system upgrade a few months ago. Since which, my interactions with Apple have nearly all been nightmarish. Apple obviously put the WAY wrong guy in charge of iOS development.
Oh. And BTW, when I look at the drop-down menu for choosing the "product" I'm having a problem with, only about half the devices registered with my Apple ID appear there. And I have no clue what kind of iPad I currently have. I have the warranty right in front of me, and all it says is "iPad WiFi 64GB Black." No doubt if I try to solve this using Apple phone support, I'll have to pay $20 to straighten out Apple's problem for them. Which is why I'm here.

My guess is you're using a long Apple ID and just omitted or mistyped a letter sometime, or something similar.
Anyway, the way to recover is this:
You cannot change ownership of the mistyped Apple ID to the correct one. After all, the mistyped one purchased it. However, you can authorize purchases from the mistyped Apple ID on your devices by doing Store > Authorize This Computer on iTunes on your computer, and enter the mistyped Apple ID and password. Then sync again and you'll be all set.
When you change computer (e.g., sell your current one and buy a replacement), you'll have to repeat this process.

How to profile performance on device?

Similar Messages

Maybe you are looking for