How to program continous modulation as PSK/PM using VSG.

Hello,
How can I configure VSG for modulation scheme as PSK/PM.

Its been almost 2 weeks since you have posted the issue. I hope your problem is resolved by now.
Still for future reference, you may be interested in Modulation Toolkit,
Regards,
Hardik Asawa

Similar Messages

How to program the modulation wheel?

Somehow I have managed to lose the command for my modulation wheel on my keyboard (M-Audio Ozonic) and I'm wondering how to get it back. I have used the learn function to add it back in but it only seems to work with the one synthesizer I programed it for. Anyone know how I can globally get the modulation function back?

Hi
Sounds like you have set up MIDI CC1 (Modulation messages) as Automation Quick Access or assigned it specifically to one synth parameter.
Go to Preferences:Automation and check the Quick Access assignments, or go to Preferences:Control Surfaces:Controller Assignments and delete anything for CC!
CCT

How to find function module's and tables used for the particulat screen or TCODE?

Hello Nation,
I would like to know how to find the function modules and tables used for the particular screen or TCODE or program.
Example : I would like know the function module used in the program RDBGFT?
How can i find that?
Thanks in advance ,Awaiting your reply.

Make use of Find function with the keyword "CALL FUNCTION".
Make use of the same find function with the keyword "Select" to know the database tables used.
Regards,
Philip.

HOw to find Report program associated module pool program?

HOw to find Report program associated module pool program?
I.e
Me21n is the tcode.I want to find screens related to this tcode.
Associated report program is RM_MEPO_GUI.(It has no screens hence it is a report program).
(if module program is attached to tcode,i can easily find entries in d020s)
Here report program is calling a module pool program SAPLMEGUI(Has screens).
If i give the Tcode Me21n,i want to list out all the screens of it..
Can u give any suggestion....

Hi Sampath.
Manually i can see it (by seeing in system-status)..
programmatically i want to know..
for ex:if u take Tcode:Va01
we can get program (dialog) and tcode in Tstc table .
If we know the program name(dialog), we can find program and screens in d020s table.
Va01 is atatched to a module pool program..No problem to find screens..
In case of me21n,
It is atatched to report program(calling module pool program)..
Here i could not be able to get the screens ..
I think u undrstood my problem..

How to create a module pool program

Dear Guru
I want to know know how to create a module pool program from se80 step by step. I want to know the steps where i will get the four includes like form routines, PAI, PBO, and global data please its very urgent.
Thanks & regards
Saifur Rahaman

hi Saifur Rahaman,
goto se80 then click find program,
next u want any name of the program enter as,
Attribute type as find Module pool click it.
next u want any package and save and activate.
program name with create screen with any number then
click layout and u want any object and save , actived.
click flow logic , four types as PBO and PAI and POV, POH.
PBO---> Trigger is before screen.
its applied for display screen and inactive or no display screen only
PAI--->Trigger is after screen
when u want button then its processed.
POV--> Value requested for F4.
POH-->Help requested for F1.
Reward if useful,
S.Suresh.

How to copy a module pool program

Hi All,
How to copy a module pool program from one system (Organization) to other system(organization) i.e. from one company to other company. My requirement is to how to download & upload module pool program.
Regards,
Rajesh Vasudeva

Hi,
Check the below link
[How to DOWNLOAD a whole module pool program????]
[Download the Module pool program]
Cheers,
Surinder

How to degub the module pool program

Hi friends,
could anyone tell me "How to degub the module pool program"...!!
Thanks in advance..!!

Hi
Debugging of module pool is same as reports, use /h or put breakpoint
but u shud know what u want to check
there are generally two event used in module pool
PBO
This event is used before displaying the screen,It is used to clear fields table, show table control, tabstrip and most important conditionally modify the scrren .
PAI
is used to validate the fields which are entered on the screen with database values and then fetch records from table.
i mean all values to make available in internal table
now u would be sure which part u want to debug.
Rewards if helpful..............

How to run the program continously...

i want to run my java program continously... i heard that by implement the thread we can run program continously... can any body give me sample code on thread which runs continously....
thanks alot
kareem

You don't really need a thread. Just write a program which doesn't exit.public class HelloWorldForever {
public static void main(String[] args) {
    while (true) {
      System.out.println("Hello World");
}But if you want a threadpublic class HelloWorldForeverThread {
public static void main(String[] args) {
    Thread t = new Thread(new Runnable() {
      public void run() {
        while (true) { System.out.println("Hello World"); }
    t.start();
}

HOW TO CALL FUNCTION MODULE INSIDE SMARTFORM

PLEASE ANYONE TELL ME, ABOUT HOW TO CALL FUNCTION MODULE INSIDE SMARTFORM. IT IS VERY URGENT!!!!!!!!!1

Hi,
Under Global Definitions, we have 'Form Routines' tab. Under this tab, u can have a dynamic subroutine call. With in FORM and ENDFORM, you can call the Function Module.With in the Program Lines editor, u can define the subroutine........PERFORM.
If helpful, reward points.
Rgds,
CK

How to print the Module pool screen using a push button in the screen

Hi Every one,
i have developed a module program , which have a selection screen and it display the output in a structured way.
output includes boxes, texts etc...
my problem is :---
How to print the Module pool screen using a push button in the screen.

When the "Print" button is pressed:
leave to list-processing and return to screen 100. "(current screen)
Call a transaction that runs your print program.
Rob

How to create function module step by step

hi experts,
i am new to ABAP.
can anybody tell me the step by step process on how to create a function module for adding two numbers without using editor screen.
ex: 2+3=5.

Hi,
You can only create function modules and function groups using the Function Builder in the ABAP Workbench. For further information, refer to Creating New Function Modules. This section uses an example to illustrate how a function module is created from the point of view of ABAP programming.
Function Groups and Function Modules:
Firstly, we create a new function group DEMO_SPFLI to hold the function module. Then, we can create the new function module.
Parameter Interface:
You can specify the types of interface parameters in function modules in the
same way as the parameter interfaces of subroutines. Since function
modules can be used anywhere in the system, their interfaces can only contain
references to data types that are declared systemwide. These are the elementary
ABAP data types, the systemwide generic types, such as ANY TABLE, and types
defined in the ABAP Dictionary. You cannot use LIKE to refer to data types
declared in the main program.
Exceptions:
Our function module needs an exception that it can trigger if there are no entries
in table SPFLI that meet the selection criterion. The exception NOT_FOUND
serves this function.
Source Code:
Having defined the parameter interface and exceptions, we can now write the
source code of our function module. To do this, choose Source code in the
Function Builder. This opens the ABAP Editor for the include program
L<fgrp>U<xx> (see Function Groups). This is the include that will
hold the program code for the function module;
Data in Function Modules
You can use the TYPES and DATA statements to create local data types and
objects. The interface parameters also behave like local data objects. In
addition, you can access all of the global data of the main program. This data is
defined in the include program L<fgrp>TOP. To open this include, choose Goto
Global data. The global data behaves like the instance attributes of a class.
The first time you call a function module in a particular function group, the data is
loaded into memory. It can then be accessed and changed by all of the function
modules in the group. The system retains the values until the next time a function
module is called.
Calling Subroutines
You use subroutines for local modularization. Function modules can
also use this technique. The function module that they call are defined in the
corresponding main program.
If you only want to call a subroutine from a single function module, it is best to
define them in the same include program as the function module itself, directly
after the ENDFUNCTION statement. These subroutines can be called from all
function modules in the function group, but for clarity, they should only be called
from the function module that precedes them.
If you want to define a subroutine that will be called from several different function
modules, you can define a special include program for it with the name
L<fgrp>F<xx>.
Raising Exceptions
There are two ABAP statements for raising exceptions. They can only be used in
function modules:
RAISE <except>.
and
MESSAGE..... RAISING <except>.
The effect of these statements depends on whether the calling program handles
the exception or not. If the name <except> of the exception or OTHERS occurs
in the EXCEPTIONS addition of the CALL FUNCTION statement, the exception is
handled by the calling program.
If the calling program does not handle the exception
The RAISE statement terminates the program and switches to debugging mode.
The MESSAGE ..... RAISING statement display the specified message. How the
processing continues depends on the message type.
If the calling program handles the exception, both statements return control to the
program. No values are transferred. The MESSAGE ..... RAISING statement
does not display a message. Instead, it fills the system fields SY-MSGID, SYMSGTY,
SY-MSGNO, and SY-MSGV1 to SY-MSGV4.
Source Code of READ_SPFLI_INTO_TABLE
The entire source code of READ_SPFLI_INTO_TABLE looks like this:
FUNCTION READ_SPFLI_INTO_TABLE.
""Local interface:
*" IMPORTING
*" VALUE(ID) LIKE SPFLI-CARRID DEFAULT 'LH '
*" EXPORTING
*" VALUE(ITAB) TYPE SPFLI_TAB
*" EXCEPTIONS
*" NOT_FOUND
SELECT * FROM SPFLI INTO TABLE ITAB WHERE CARRID = ID.
IF SY-SUBRC NE 0.
MESSAGE E007(AT) RAISING NOT_FOUND.
ENDIF.
ENDFUNCTION.
The function module reads all of the data from the database table SPFLI where
the key field CARRID is equal to the import parameter ID and places the entries
that it finds into the internal table SPFLI_TAB. If it cannot find any entries, the
exception NOT_FOUND is triggered using MESSAGE...RAISING. Otherwise, the
table is passed to the caller as an exporting parameter.
Regards,
Chandru

How to program TestStand to open a Config VI always when a new step is inserted?

I created a step type and packed it within a custom type palette (".ini" file). The code Module for this Step is a LabVIEW Express VI.
Using the "Step Type Menu Editor" I included this new step within the "Insert Step>>"
Menu.
Question: How to Program TestStand or the step type, so that by the insertion of this new step within the
sequence the configuration dialog box of the express VI automatically pops up? (this would be like using
the option "Configure VI..." within the step context menu)
I would appreciate a lot all the help about this issue!
Thanks!
- Caribe -

Caribe,
I. In order to accomplish this you need to insert a custom substep in your step type.
    1. Go to your step types properties and select the substeps tab.
    2. Select the ActiveX/COM Adapter from the Adapter list.
    3. Add a new custom substep.
    4. Rename it -> OnNewStep
    5. Specify the Module.
    6. Object Reference = Step.
    6. Object Class = Step.
    7. Call the Method -> EditCode.
Now every time you insert your step, this substep will be executed and as a result you will get the Express VI configuration dialog.
Best Regards.
Rename the
Message Edited by Antonio Lie (NI) on 08-23-2005 01:30 PM
Message Edited by Antonio Lie (NI) on 08-23-2005 01:33 PM

How to program smart cards

Can help me where i can get infomation about smart card programming how to program on 4428
but mainly on MCU how files are made and how many files can i make
guide me on this
where can i get Help or get to read about them
I am trainee at www.thechiptech.com
A smart card provider

please sir somebody help as this a genuine query.
I have attached a thread to the program which continously checks for cards in drive and which card is inserted. but some times it hangs and gives error please help...
James
www.thechiptech.com

How can a CVI module access the UUT serial number already stored in TestStand?

I'm using the parallel model and I need to program each of my UUT's EEPROM with its serial number. I know that
TestStand has the serial number and I've gathered from the Developer exchange that it is stored in RunState.Caller.Locals.UUT.SerialNumber, but how does my CVI module access it? Can it be passed to the module, if so, how? or what is the exact form of the TestStand API function that can be used to access the serial number. Thank-you for any suggestions.

Hi lynx,
if you have a look at the way in which the parallel and batch process models work, they're a two stage process model, i.e. the process model sequence your (main) sequence sees is called by an another process model. In this case, RunState.Caller on it's own only takes you up one level, but RunState.Caller.RunState.Caller will take you to the top level process model. When dealing with multi-UUT models, it depends on which serial number you're after (parallel serial numbers are stored in the TestUUTs model entry point->Locals.ModelData.TestSockets[0].UUT.SerialNumber
where the [0] signifies the testsocket you're looking at (i.e. if it's the third testsocket, use [2].)
batch serial numbers are stored in the same place, with the addition of the BatchSerialNumber (i.e. TestUUTs model entry point->Locals.ModelData.TestSockets[0].UUT.BatchSerialNumber, however there is also a BatchSerialNumber in TestUUTs model entry point->Locals.ModelData.BatchSerialNumber which is the same as the above one.
You can always use the RunState.Root to get to the main calling process model, and in the case of the parallel and batch process models, the serial numbers are passed down from the top level execution entry point anyway into RunState.Root.Parameters.ModelData.TestSockets[0].UUT.SerialNumber
(otherwise, if you're very buried in sequences, i.e. your mainsequence calls another which calls another etc etc, your call gets longer and longer - in cases like this I tend to use a Parameter, and pass the serial number down through the levels)
If you want the data as if it came from the top level, since the LabVIEW adapter needs to see the data in a particular place, you can also use
RunState.Root.Locals.UUT.SerialNumber.
The quickest way I've found to find stuff is to create a new sequence file with just a label step in it. Set the sequence file to use the appropriate process model you're interested in, and set the label step to a breakpoint. You can then look at the context tab once you've set the sequence running from your desired execution entry point, and browse away.
There's some great documentation in \Components\NI\Models\TestStandModels\TestStandProcessModels.PDF
explaining how the process models actually work.
A word of warning though - if you decide to change the serial numbers on the fly (one particular case is if you needed a bar code serial number which included information on failures for example), because the serial number is available in several places, you need to check where the report generation is picking up it's serial number information from.
Hope that helps
Sash.
// it takes almost no time to rate an answer

How to install memory modules on a macbook pro 15"

I run Windows 7 via parallels desktop on my macbook pro. How do I type special characters on a Word document using the mac keyboard?

how to install memory modules on a macbook pro 15"
Read the manual / user guide that came with your comptuer or download it from http://support.apple.com/manuals/
I run Windows 7 via parallels desktop on my macbook pro. How do I type special characters on a Word document using the mac keyboard?
Post your question on the Paralells forums: http://forums.parallels.com

How to program continous modulation as PSK/PM using VSG.

Similar Messages

Maybe you are looking for