How to protect my company name and domain names

Hi All
I have just been approached via email from a company in China wanting to use my company name for their client and asking if it has been registered.
It hasn't and I am now extremely worried and not sure what to do. I have been trading under this name for 2 and half years and have my domain name under the company name too.
Does anyone know if they can take this from me if they register the same name?
Tracey

You do have to be careful that your domain doesn't expire—you have to pay the yearly fee or it will be available to anyone. If you've lost track of where it's registered or when it expires, you can look it up here:
Whois Lookup & IP | Whois.net

Similar Messages

How to change host name and domain name in installed Cisco Meeting Place Express 2.0?

Hi
I have Cisco Meeting Place Express 2.0 installed on server. Meting Place uses Linux (Red Hat) as base operation system. Please tell me how I can change host name and domain name for Meeting Place Express application to integrate it into corporate domain infrastructure.
Thanks in advance!!!
Sincerely yours
Sergey Bondarenko

Hi
Thanks for your attention for my humble problem.
I have performed Meeting Place Express configuration through the “net” command.
But now unfortunately I can't connect to meeting place through web browser. I just get blank page.
Though I can reach the server with help of ssh. I think my DNS works properly because I can resolve the ip address of cumpxvoice .uclab.com and cumpxweb. uclab.com with help of dig command.
Have you any idea?
A lot of thanks in advance!!
Sincerely yours Sergey Bondarenko
Here I have printed the net configuration output of Cisco meeting Place Express:
[root@cumpxvoice root]# net
This is the MeetingPlace Express network configuration utility.
Up to the point where you save changes, it is safe to hit ^C to get
out at any time, in which case nothing will have changed.
1) List current configuration
2) Configure Ethernet port 1
3) Configure Ethernet port 2
4) Configure service bindings
5) Set host names
6) Set domain name
7) Configure DNS service
8) Configure NTP service
9) Configure routing
10) Done
Select: 1
Primary/audio host name: cumpxvoice
HTTP host name:          cumpxvoice
RTMP host name:          cumpxweb
Domain name:             uclab.com
Service bindings:
Audio:                   port 1 (eth0)
Web browsing (HTTP):     port 1 (eth0)
Web conferencing (RTMP): port 2 (eth1)
Port 1 (device eth0):
IP Address:      10.62.60.116
Network mask:    255.255.255.0
Default gateway: 10.62.60.1
Link setting:    autoneg on
Port 2 (device eth1):
IP Address:      10.62.60.117
Network mask:    255.255.255.0
Default gateway: 10.62.60.1
Link setting:    autoneg on
Static routes:
Destination      Gateway          Network mask     Port
0.0.0.0          10.62.60.1       0.0.0.0          1
DNS Servers:
10.62.60.115
10.0.1.4

How to change the full host and domain name on OS X Leopard...

I recently bought an iMac, and I'm trying to configure it for my network. The question I have is, how can I change the host name and domain name from Skuld.local to skuld.tolharadys.net?
After mucking around with a few searches on Google, I've gotten the domain name to stick since running domainname returns tolharadys.net. Also I can change the hostname as reported by 'hostname' temporarily by running 'hostname skuld.tolharadys.net' in Terminal.app. However, this isn't persistent after reboots. Ideas are welcome.

You would need a DNS server on your network configured to answer authoritatively for that particular subdomain.

Change Groupwise system name, po name and domain name?

Hello Board,
we want to migrate a Groupwise 7 System (Netware) to a Groupwise 8 System (Linux).
Doesnt sound that difficult, but we dont want to use the names for the system name, the post office and the domain (groupwise domain, _not_ internet domain) which were used on the old system.
Currently iam trying the way mentioned in TID 10077372, which mentions merging the two systems and then delete the old System.
Am i on the right way? Do you have any hints?
Any help appreciated.
best regards
sven

Grewes,
Ok you have a GW system(s) that you do not like the names and you want to change them. Not a problem. As you stated, and as Tommy said -merging works.
The process you need is to build a new GW system -same as the version you have running preferred. Set it up as you like it -name-wise. Then, merge the older systems (branches) into the new system you built. Then you will have to build new domains/post offices and move mailboxes from the old GW branches into the new domains/post offices. When its all done -delete the old, and you are done.
I have done many different variations of this type of migration/merge/consolidation. It works, its just a lot of work. Just make sure to plan it all out on paper first, document it, then go forward.
Good Luck!
Take Care.
Gregg A. Hinchman
Consultant
[email protected]
www.HinchmanConsulting.com
A Novell Consulting Partner
317.329.0288 Office
413.254.2819 eFax
"Courage is doing what is right."
"Do not be bound to any doctrine, theory or ideology, even Buddhist ones. All systems of thought are guiding means, not absolute truth." Thich Nhat Hanh, Vietnamese monk.
Book Travel @: www.booknewtravelnow.com
>>>
From: grewes<[email protected]>
To:novell.support.groupwise.migrations
Date: 8/20/2009 6:56 AM
Subject: Re: Change Groupwise system name, po name and domain name?
Thank you for your reply.
I do not want to keep the names.
If i want to link this domain to another branches domain and the domain
is called the same this doesnt work AFAIK.
grewes
grewes's Profile: http://forums.novell.com/member.php?userid=3563
View this thread: http://forums.novell.com/showthread.php?t=383606

Difficulty changing computer name and domain name

I have a working Xserve with the latest Snow Leopard Server and am having difficulty reconfiguring it from its keyboard.
I would like to edit the computer name and domain name and maintain all other server settings. I would prefer to do this off-line. However Server Admin appears not to work off-line and any attempt to change computer name or domain name removes all server settings from view including the serial number. I can recover everything by reinstating computer name etc and restarting on-line.
Is the serial number tied to the computer name and/or domain name?
Is there any way to retain my existing server settings for a different domain?
Is there any way to progress any of this off-line?

This has now been resolved. This note is to assist others who have the same problem.
1 - I had been changing the computer name in the place I had always done it - System Preferences/Sharing. This confused Server Admin. Reverting to the original name and changing computer name and location within Server Admin resolved the issue. That is System Preferences/Sharing is updated by Server Admin but not vice versa.
2 - Playing with these things can corrupt Server Admin plist resulting in a restarted Server Admin not seeing the edited server even with the server otherwise fully functioning. Trashing Server Admin plist resolved this for me without loss of server settings.
3 - Having set it up off-line I experienced difficulty as soon as I went on-line. This was resolved by changing the server from 'local' to its full domain name. I have no explanation for this as the same settings had previously worked with 'local'.
4 - Server Admin can take a long time to find settings and occasionally failed to do so until after a restart.
The result can be seen here: http://links.open.ac.uk/ - Since Apache refuse to provide hit counter support (there are several public posts of mine on the subject) I use JavaScript to retrieve the count from an old QPQ server running on a G3 with OS 9.

How do I find out user and domain names in WL7.0 security

Hi,
I'm moving to WL7.0 security and now weblogic.security.acl.Security.getCurrentUser()
that worked in CompatibilityMode throws NullPointerException. What is the alternative
to deprecated weblogic.security.acl.Security in the new Weblogic security framework?
Also, how can I find the current domain name?
Thanks,
Michael.

"Michael Bogomolov" <[email protected]> wrote in message
news:3ec515ae$[email protected]..
>
Hi,
I'm moving to WL7.0 security and nowweblogic.security.acl.Security.getCurrentUser()
that worked in CompatibilityMode throws NullPointerException. What is thealternative
to deprecated weblogic.security.acl.Security in the new Weblogic securityframework?
>
See getCurrentSubject in
http://e-docs.bea.com/wls/docs81/javadocs/weblogic/security/Security.html
getCurrentUser only works in compatibilty mode

Apps 11i , Need to change Host Name and Domain Name after Install

Hi,
I have installed 11.5.10.2 on Windows. Now I need to change the Host and Domain of the instance.
Please advise.
Regards
Tauseef

Hi,
Please refer to:
Note: 338003.1 - How to change the hostname and/or port of the Database Tier using AutoConfig
Note: 341322.1 - How to change the hostname of an Applications Tier using AutoConfig
Regards,
Hussein

Need to the domain name and computer name in offline mode

Hi,
I can not able to login to the windows system, the password i am using is correct. But im getting error "the login method using is incorrect, please contact network admin". I forgot the domain name i set to login to the system. Now Currently i
dont have the recovery/windows7 disks. I have Unix in my machine as well. so i have mounted the windows7 parition in linux, and trying to find out the computer\domain name. so please suggest which file i need to search to get the details.
Thanks,
Ravi

Hi Ravi,
If you want to know more information about domain name, please take a look at the following article.
http://technet.microsoft.com/en-us/library/cc731265(v=ws.10).aspx
Based on my research, the computer name and domain name are stored in the registry key.
We could find computer name in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\ComputerName\ComputerName.
And we can find domain name in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Domain.
Have you ever joined a domain?
If yes, please contact the network admin as mentioned.
And we can type Domain name\Username and then password to login.
If you haven’t, we could try to type Computer name\username(.\username) and then the password to login the computer.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

How to change Host and domain name on APS 10g R2

Hi,
I have installed oracle application server 10g rel.2 I want to change the host and domain of the system, what should I do, Plz help.
Thanks and Regards.
Khawar

Hi,
Thanks to all of you for reply, I started without reading any manual to modify host and domain name and after expending several hours finally decided to reinstall APS, with new installation forms runing ok but report server having problem if you see the status of report server in enterprise manager it shows green mark(if you want to stop it via EM it will not), if you check with Report Queue manager it says no report server with the given name,
if you check the report with GETSERVERINFO via browser it says
"REP-51002 Bind to report server AAAAA failed. some one have idea."
some one plz explain me how can I fix it.
Thanks and Regards.
Khawar

How to show company name and contact name on the incoming calls of iPhone 4

Kindly provide me with a useful solution of how to show company name and contact name on the incoming calls of iPhone4.
even with an application or from the setting of the iPhone itself, but without telling me a solution like writting the company name in the contact name field.
This is a very important option, i think it is a must, not an option and apple should fix this problem fastly. because it is already available in the older models of iPhone like iPhone 3G and 3GS.
How an important feature like this could be available in old models, but in the later models is not available?

Currently not possible without putting the company name in the contact name's field. AFAIK, it's never been available on any iOS version.
You might check the App Store for an app that can do this although I'm pretty sure you won't find one.
http://www.apple.com/feedback/iphone.html

How to change IP, Hostname and domain name for Oracle Application R12

Hi,
I'm new to Oracle, we used to have one production and one test server for Oracle Application R12, but the test server was corrupted, so we decided to clone production server and create a new test server, after cloning and creation of test server, how should we do to change IP address, hostname and domain name for test server?
Our production and test server environment is:
Linux Enterprise AS 2.6.9
Application module: E-Business Suite Treasury only
Your advice will be much appreciated.
Regards,
Kenneth
Edited by: 850209 on Apr 7, 2011 5:37 PM

850209 wrote:
Hi,
There are few tnsnames.ora and listener.ora files in the system, how to know which one are effective? If I change tnsnames.ora hostname entry, do I need to change listerner.ora file also?
Thanks.
Regard,
Kenneth.tnsnames.ora is used only by client processes. listner.ora is used only to configure the listener, and that is a server side issue only. In addition, the listener can start without any listener.ora at all, using all default values. See my discussion of tns issues at edstevensdba.wordpress.com
If you are using dbcontrol, you will most likely need to reconfigure it, using the emca utility.

How to retrieve username and domain name on Macintosh.

Hi,
Can anyone tell me how to retrieve username and domain name on Macintosh
Thanks
Priyanka.

There is no system property for the domain name.
Can you please tell me some other way for solving
this problem.No. If it's not an environment variable (System.getEnv IIRC) and no property, you can't get it without native calls using JNI or Runtime.exec/Process.

I have and existing web site and domain name. I'd like to know how to import into iweb. I currently use Yahoo's sitebuilder to build my site but Sitebuilder is not compatible with the iMac

I have and existing web site and domain name. I'd like to know how to import into iweb. I currently use Yahoo's sitebuilder to build my site but Sitebuilder is not compatible with the iMac

Chapter 2.3 on the iWeb FAQ.org site has tips on using some of the existing files, image, audio, video, etc., from the published site in the creation of the new site with iWeb.
OT

How to change the name / IP address and domain name for BOE Server

Hello,
We want to change the name / IP address and domain name for BOE Server, please could you indicate the steps or procedure to follow?
I need your help
thank you

If it's 3.1 just change them, shouldn't cause any issues if by domain name you are referring to changing the domain the computer belongs to. If you are changing your domain for AD authentication then you will may have to take quite a few steps if the old domain is going away. Let us know.
Regards,
Tim

How can send mails using hotmail/rediffmail domain name?

I have used the below code to send a mail using javamail API?Even when I am sending my application does not have notified any of error/exceptions,But the message is not reached to I have given receipient's address in the to field.
import javax.mail.*;
import javax.mail.internet.*;
import javax.activation.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.util.*;
public class Sendmail1 extends HttpServlet {
private String smtpHost;
// Initialize the servlet with the hostname of the SMTP server
// we'll be using the send the messages
public void init(ServletConfig config)
throws ServletException {
super.init(config);
smtpHost = config.getInitParameter("smtpHost");
//smtpHost = "sbm5501";
smtpHost = "www.rediffmail.com";
public void doGet(HttpServletRequest request,HttpServletResponse response)
throws ServletException, java.io.IOException {
String from = request.getParameter("from");
String to "[email protected]";
String cc = "[email protected]";
String bcc ="[email protected]";
String smtp ="www.rediffmail.com";
String subject = "hai";
String text = "Hai how r u";
PrintWriter writer = response.getWriter();
if (subject == null)
subject = "Null";
if (text == null)
text = "No message";
String status;
try {
// Create the JavaMail session
java.util.Properties properties = System.getProperties();
if (smtp == null)
smtp = "www.rediffmail.com";
properties.put("mail.smtp.host", smtp);
Session session = Session.getInstance(properties, null);
//to connect
//Transport transport =session.getTransport("smtp");
//transport.connect(smtpHost,user,password);
// Construct the message
MimeMessage message = new MimeMessage(session);
// Set the from address
Address fromAddress = new InternetAddress(from);
message.setFrom(fromAddress);
// Parse and set the recipient addresses
Address[] toAddresses = InternetAddress.parse(to);
message.setRecipients(Message.RecipientType.TO,toAddresses);
Address[] ccAddresses = InternetAddress.parse(cc);
message.setRecipients(Message.RecipientType.CC,ccAddresses);
Address[] bccAddresses = InternetAddress.parse(to);
message.setRecipients(Message.RecipientType.BCC,bccAddresses);
// Set the subject and text
message.setSubject(subject);
message.setText(text);
Transport.send(message);
//status = "<h1>Congratulations,</h1><h2>Your message was sent.</h2>";
} catch (AddressException e)
status = "There was an error parsing the addresses. " + e;
} catch (SendFailedException e)
status = "<h1>Sorry,</h1><h2>There was an error sending the message.</h2>" + e;
} catch (MessagingException e)
status = "There was an unexpected error. " + e;
// Output a status message
response.setContentType("text/html");
writer.println("<title>sendForm</title><body bgcolor= ><b><h3><font color=green><CENTER>CALIBERINFO.COM</CENTER></h3>Your message was sent to recepient(s).<br><font color=red>"+"\n"+to);
writer.println("<br><br><a href=e:/mail/javamail/mail.html>back to compose</a>");
writer.close();
Please any one help me out from this probs.
Awaiting for yours reply,
or give me a reply to: [email protected]
Regards,
@maheshkumar.k

Hi,
how can send mails using hotmail/rediffmail domain name?In your java application,you specified www.rediffmail.com as your
smtp server.But that is the address of that website.Try will a smtp
server instead.For a list of free smtp servers,please visit http://www.thebestfree.net/free/freesmtp.htm
Hope this helps.
Good Luck.
Gayam.Srinivasa Reddy
Developer Technical Support
Sun Microsystems
http://www.sun.com/developers/support/

How to protect my company name and domain names

Similar Messages

Maybe you are looking for