How to pull the Latest Time/Date of the update?

Hi BW gurus,
Hope everyone is fine.
I have a doubt to meet my user requirement.
I have a developed the infocubes and Infoset(combining only two master data infoprovider infoobjects) and created few reports on them.
Now the requirement is
"Client is asking for the latest date on which the data target is updated".
Say if we run the infopackage on a particular day say "Dec 1st 2006"
For example one cube is a full update, always by dropping the previously loaded data and one cube is updated with the delta update.
For all the reports , if we run the query, the report should give the information stating that the latest update was made on "UPDATED DATE=Dec 1st 2006".
how to achieve this?
Please somebody help me out.
Please tell me the step by step that I need to follow to achieve this.
Any kind of help is appreciated.
I am still in DEV.
Thanks in advance,
Regards
Sam Mathew

Hello
This can be achieved
First add an infoobject to your Data targets for Update date
Second , include the update date infoobject in your infosource
Map the infoobject with the field sys-datum which is current system date
So whenever you execute an infopackage, the sys-datum field will pick up the current date at which it is executed.
This is what you want in BW as latest update date of data target
Regards
Ganesh N

Similar Messages

How to pull the data into smartform after designing layout?

how to pull the data into smartform after designing layout?

call the smartform in your Driver program and pass your output internal tables in the smartforms paramaters
Check the below Sample code.
FORM label_print.
DATA : g_fm_name TYPE rs38l_fnam,
 g_output TYPE ssfcompop,
 g_control TYPE ssfctrlop,
 g_form TYPE tdsfname VALUE 'ZPRINT_LABELS',
 g_dest TYPE rspopname,
 g_printer TYPE rspoptype..
REFRESH : i_out[],i_qals[].
SELECT matnr maktx
 INTO TABLE i_out
 FROM makt
 FOR ALL ENTRIES IN i_mseg
 WHERE matnr = i_mseg-matnr
 AND spras = sy-langu.
SELECT prueflos objnr ersteldat erstelzeit matnr revlv charg mengeneinh
 INTO TABLE i_qals
 FROM qals
 FOR ALL ENTRIES IN i_mseg
 WHERE matnr = i_mseg-matnr
 AND charg = i_mseg-charg.
*FM to accept the device type and returns the short name of the output device
CALL FUNCTION 'EFG_GET_PRINTER'
 EXPORTING
 x_no_dialog = ' '
 x_obligatory = 'X'
 IMPORTING
 y_tddest = g_dest
 EXCEPTIONS
 cancelled = 1
 failed = 2
 OTHERS = 3.
*device type name for the output device
SELECT SINGLE patype "#EC CI_NOFIELD
 FROM tsp03d
 INTO g_printer
 WHERE padest = g_dest.
*printer setting
g_control-no_dialog = 'X'.
g_output-tdarmod = '1'.
g_output-tdcopies = '001'.
g_output-tddest = g_dest.
g_output-tdprinter = g_printer.
g_output-tdnewid = 'X'.
g_output-tdimmed = 'X'.
CLEAR wa_mseg.
LOOP AT i_mseg INTO wa_mseg.
 READ TABLE i_out INTO wa_out WITH KEY matnr = wa_mseg-matnr.
check for the status and filter the records
 CLEAR : wa_qals.
 LOOP AT i_qals INTO wa_qals WHERE matnr = wa_mseg-matnr
 AND charg = wa_mseg-charg.
 CALL FUNCTION 'STATUS_TEXT_EDIT'
 EXPORTING
 objnr = wa_qals-objnr
 spras = sy-langu
 IMPORTING
 line = l_status
 EXCEPTIONS
 object_not_found = 1
 OTHERS = 2.
 IF l_status CS 'LTCA' OR l_status CS 'SKIP'.
 DELETE i_qals.
 ENDIF.
 ENDLOOP.
 SORT i_qals BY ersteldat DESCENDING erstelzeit DESCENDING.
 IF i_qals IS INITIAL.
 l_msg = text-002.
 ELSE.
 READ TABLE i_qals INTO wa_qals INDEX 1.
 SELECT prueflos vbewertung
 INTO TABLE i_qave
 FROM qave
 WHERE prueflos = wa_qals-prueflos
 AND kzart = 'L'.
 IF sy-subrc <> 0.
 l_msg1 = text-003.
 ENDIF.
 SORT i_qave.
 CLEAR : wa_qave.
 IF NOT i_qave IS INITIAL.
 READ TABLE i_qave INTO wa_qave INDEX 1.
 IF wa_qave-vbewertung = 'A'.
 l_msg = text-002.
 ELSEIF wa_qave-vbewertung = 'R'.
 l_msg1 = text-003.
 ELSE.
 l_msg1 = text-003.
 ENDIF.
 ENDIF.
 ENDIF.
 CLEAR : wa_ser03.
 READ TABLE i_ser03 INTO wa_ser03 WITH KEY mblnr = wa_mseg-mblnr.
*Calling Smartform
 CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
 EXPORTING
 formname = g_form
 IMPORTING
 fm_name = g_fm_name
 EXCEPTIONS
 no_form = 1
 no_function_module = 2
 OTHERS = 3.
 LOOP AT i_objk INTO wa_objk WHERE obknr = wa_ser03-obknr.
*Calling FM generated from the smartform
 DATA : l_date(10) TYPE c,
 l_date1(10) TYPE c,
 l_date2(10) TYPE c,
 l_date3(10) TYPE c,
 l_hyphen(1) TYPE c VALUE '-'.
 CLEAR : l_date,l_date1,l_date2,l_date3.
 l_date1 = wa_mseg-vfdat+0(4).
 l_date2 = wa_mseg-vfdat+4(2).
 l_date3 = wa_mseg-vfdat+6(2).
 CONCATENATE l_date1 l_hyphen l_date2 l_hyphen l_date3 INTO l_date.
 CALL FUNCTION g_fm_name
 EXPORTING
 control_parameters = g_control
 output_options = g_output
 user_settings = ' '
 g_matnr = wa_mseg-matnr
 g_mat_text = wa_out-maktx
 g_batch = wa_mseg-charg
 g_rev = wa_qals-revlv
 g_edate = l_date
 g_lot = wa_qals-prueflos
 g_qty = wa_mseg-erfmg
 g_uom = wa_mseg-erfme
 g_serial = wa_objk-sernr
 g_smsg = l_msg
 g_fmsg = l_msg1
 EXCEPTIONS
 formatting_error = 1
 internal_error = 2
 send_error = 3
 user_canceled = 4
 OTHERS = 5.
 CLEAR g_output-tdnewid.
 ENDLOOP.
 IF sy-subrc <> 0.
 CLEAR : l_date,l_date1,l_date2,l_date3.
 l_date1 = wa_mseg-vfdat+0(4).
 l_date2 = wa_mseg-vfdat+4(2).
 l_date3 = wa_mseg-vfdat+6(2).
 CONCATENATE l_date1 l_hyphen l_date2 l_hyphen l_date3 INTO l_date.
 CALL FUNCTION g_fm_name
 EXPORTING
 control_parameters = g_control
 output_options = g_output
 user_settings = ' '
 g_matnr = wa_mseg-matnr
 g_mat_text = wa_out-maktx
 g_batch = wa_mseg-charg
 g_rev = wa_qals-revlv
 g_edate = l_date
 g_lot = wa_qals-prueflos
 g_qty = wa_mseg-erfmg
 g_uom = wa_mseg-erfme
 g_serial = wa_objk-sernr
 g_smsg = l_msg
 g_fmsg = l_msg1
 EXCEPTIONS
 formatting_error = 1
 internal_error = 2
 send_error = 3
 user_canceled = 4
 OTHERS = 5.
 CLEAR g_output-tdnewid.
 ENDIF.
ENDLOOP.
IF sy-subrc = 0.
 MESSAGE i000(zm).
ENDIF.
ENDFORM. " label_print

How to pull resource (equipment) times into BI from ECC

Hi Experts,
i want to know How to pull resource (equipment) times into BI from ECC plz help me to this..
plz tellme step by step analysis ....how can find the data sources ....
Its very argent.........plz any one help me
Venkat

Hi
Didn't understand your question. Do you want to extract that field from R/3? Please elaborate

How to display the updated data from db to user interface in sruts framewor

A beginner in this area, I have been able to read a record from a
MySQL database and populate in jsp form . Now, my goal is to
allow the user to edit the contents of the form and then update the
record in MySQL and then display the same in jsp. page
The scenario in detail
1)the data is fetched from db and displayed in non-editable format
2)Next button is clicked
3)Now in the same jsp page I view the same data from db in editable format
4)The user is allowed to change the information
5)Now update button is clicked
6)the records are updated in the db -Finished doing till this step
7)But the updated info in non - editable format to be displayed in jsp page is left pending.
Here is my code for jsp,i want know how to write an action for this,tried doing the same in java and I'm successful.but what I need is how to fetch the updated information in the user interface.
I've made both editable as well as non editable info in the same page with different actions.
pl help me,I'm a newbie
<%@ taglib uri="/WEB-INF/struts-bean" prefix="bean" %>
<%@ taglib uri="/WEB-INF/struts-html" prefix="html" %>
<%@ taglib uri="/WEB-INF/struts-logic" prefix="logic" %>
<%@ page language="java" %>
<%@ page import="java.util.ArrayList,java.util.Iterator" %>
<%@ page import="com.finocus.common.container.CustomerDetailsTest;" %>
<html:html>
<head>
 <title>CUSTOMER DISPLAY</title>
</head>
<body>
 <table width="100%" bgcolor="darkkhaki">
 <tr>
 <td><table width="100%" bgcolor="indigo">
 <tr>
 <td>Display</td>
 <td>Update</td>
 <td>Verify</td>
 <td>Confirm</td>
 </tr>
 </table>
 </td>
 </tr>
<%
 //Container for holding data
 ArrayList list = (ArrayList)session.getAttribute("CUSTOMERDETAILS");
 Iterator itr=list.iterator();
 while(itr.hasNext())
 CustomerDetailsTest cust = (CustomerDetailsTest) itr.next();
 System.out.println("testGetCustomerDetails()-successed. retrieved CustomerDetailsTest="+cust.toString());
%>
<%
 //Session for checking whether edit or non-edit mode
 String pageMode = (String)session.getAttribute("CUSTOMER_PAGE_MODE");
 session.removeAttribute("CUSTOMER_PAGE_MODE");
 if(null==pageMode)
 pageMode = "EDIT";
 if(pageMode.equals("EDIT"))
 //display data in the form
 System.out.println("Editable mode");
%>
 <html:form action="/nonedit">
 <tr>
 <td><table width="100%" bgcolor="darkkhaki">
 <tr>
 <td><bean:message key="label.id"/></td>
 <td><%=cust.getCusId()%></td>
 </tr> 
 <td>
 
 <bean:message key="label.Company"/>
 </td> 
 <tr>
 <td><bean:message key="label.cname"/></td>
 <td><html:text property="name" value="<%=cust.getCname()%>"/></td>
 <td><bean:message key="label.cphone"/></td>
 <td><html:text property="phone" value="<%=cust.getCphone()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.caddr1"/></td>
 <td><html:text property="address1" value="<%=cust.getCaddress1()%>"/></td>
 <td><bean:message key="label.cemail"/></td>
 <td><html:text property="email" value="<%=cust.getCemail()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.caddr2"/></td>
 <td><html:text property="address2" value="<%=cust.getCaddress2()%>"/></td>
 <td><bean:message key="label.cfax"/></td>
 <td><html:text property="fax" value="<%=cust.getCfax()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.ccity"/></td>
 <td><html:text property="city" value="<%=cust.getCcity()%>"/></td>
 <td><bean:message key="label.czip"/></td>
 <td><html:text property="zip" value="<%=cust.getZip()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.cstate"/></td>
 <td><html:text property="state" value="<%=cust.getCstate()%>"/></td>
 </tr> 
 <td>
 
 <bean:message key="label.Admin"/>
 </td> 
 <tr>
 <td><bean:message key="label.AAname"/></td>
 <td><html:text property="adminname" value="<%=cust.getAname()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AAemail"/></td>
 <td><html:text property="adminemail" value="<%=cust.getAemail()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AAphone"/></td>
 <td><html:text property="adminphone" value="<%=cust.getAphone()%>"/></td>
 </tr> 
 <td>
 
 <bean:message key="label.User"/>
 </td> 
 <tr>
 <td><bean:message key="label.AUname"/></td>
 <td><html:text property="adminusername" value="<%=cust.getUname()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AUemail"/></td>
 <td><html:text property="adminuseremail" value="<%=cust.getUemail()%>"/></td>
 </tr> 
 <tr align="center">
 <td><html:cancel value="Cancel"/>
 <html:submit value="Next"/></td>
 </tr>
 </html:form>
<%
 }else
 //display data in the text
 System.out.println("Non-Editable mode");
%>
 <html:form action="/edit">
 <tr>
 <td><table width="100%" bgcolor="darkkhaki">
 <tr>
 <td><bean:message key="label.id"/></td>
 <td><%=cust.getCusId()%></td>
 <td><bean:message key="label.status"/></td>
 <td><%=cust.getStatus() %></td>
 </tr> 
 <td>
 
 <bean:message key="label.Company"/>
 </td> 
 <tr>
 <td><bean:message key="label.cname"/></td>
 <td><%=cust.getCname()%></td>
 <td><bean:message key="label.cphone"/></td>
 <td><%=cust.getCphone()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.caddr1"/></td>
 <td><%=cust.getCaddress1()%></td>
 <td><bean:message key="label.cemail"/></td>
 <td><%=cust.getCemail()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.caddr2"/></td>
 <td><%=cust.getCaddress2()%></td>
 <td><bean:message key="label.cfax"/></td>
 <td><%=cust.getCfax()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.ccity"/></td>
 <td><%=cust.getCcity()%></td>
 <td><bean:message key="label.czip"/></td>
 <td><%=cust.getZip()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.cstate"/></td>
 <td><%=cust.getCstate()%></td>
 </tr> 
 <td>
 
 <bean:message key="label.Admin"/>
 </td> 
 <tr>
 <td><bean:message key="label.AAname"/></td>
 <td><%=cust.getAname()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AAemail"/></td>
 <td><%=cust.getAemail()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AAphone"/></td>
 <td><%=cust.getAphone()%></td>
 </tr> 
 <td>
 
 <bean:message key="label.User"/>
 </td> 
 <tr>
 <td><bean:message key="label.AUname"/></td>
 <td><%=cust.getUname()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AUemail"/></td>
 <td><%=cust.getUemail()%></td>
 </tr> 
 <tr align="center">
 <td><html:submit value="Update"/></td>
 </tr>
 </html:form>
<%
%>
<%
%>
 </table>
 </td>
 </tr>
 </table>
</body>
</html:html>

u r using action classes. so after calling the insert method in Action Class to a dao... the next statement should be retrieve statement. so at the time of updating first it will get updated.. the next statement it will execute is retrieve and then set these details in VO or FORM and show it on JSP
Message was edited by:
leo_michael

How to pull the Sale order number(sales document) to Accounting document

Hi Gurus,
How to pull the sale order number to the accounting document.
Is any configuration needed to this.
When i run the FBL5N Repoprt ,Sale order number (Sales document) is not getting updated to accounting document.It is diplaying as blank field.
Thanks you.

Hi Shivaji,
In order to display the Sales document in the customer line item report, you need to add it as a special field thorugh customizing settings.
Path - SPRO - FA-GL Accounting - GL Accounts - Line Items - Define special fields for finding and sorting data and in that select the table BSEG-and field VBEL2 (Sales document) and save/
This will work. hope this helsp
regards,
radhika

How to pull the delta

kindly tell me the procedure how to pull the delta
regards
gurkiran

Hi,
You need to do initialization with data transfer first. Once that load is complete, change the update mode to delta in infopackage and now it will pull delta records,
Shashank

I had to restore my computer to the factory settings, which means my itunes library was lost except for what was on my ipod nano. How do pull the songs from my ipod back onto my computer?

I had to restore my computer to the factory settings, which means my itunes library was lost except for what was on my ipod nano. How do pull the songs from my ipod back onto my computer? I have over 200 songs. There is no way I can re-purchase them! Any help?

How to use your iPod to move your music to a new computer

I have am IPhone 3GS. I put all my pics in folders and now I dont know how to pull the folders off my phone on my laptop . I want to change up and delete some of them, Can anyone help

I have am IPhone 3GS. I put all my pics in folders and now I dont know how to pull the folders off my phone on my laptop . I want to change up and delete some of them, Can anyone help

You have to make the changes you want in the folders on your computer, then sync your new choices via iTunes. iPhone, iPad and iPod touch: Syncing photos via iTunes, http://support.apple.com/kb/HT4236

HT4972 I attempted to install the iOS 5 software onto my iPhone 4 several times a few months ago. Each time the download timed out at about 3.75 hours. Any suggestions on how to complete the update?

I attempted to install the iOS 5 software onto my iPhone 4 several times a few months ago. Each time the download timed out at about 3.75 hours. Any suggestions on how to complete the update?

See... Updating to iOS 5
http://support.apple.com/kb/HT4972
If you are using windows...
Temporarily disable your firewall and antivirus software and try again...
See here for Connection Issues
http://support.apple.com/kb/TS1379
From Here
http://www.apple.com/support/itunes/troubleshooting/

I have an older mac and it wants me to update to itunes 10 but my mac is too old and I cant figure out how to disable the update

I have an older mac and it wants me to update to itunes 10 but my mac is too old and I cant figure out how to disable the update so I can use the store.

If Software Update is offering the update then it would be compatible with your model. Unfortunately, you haven't provided us with any information on your hardware that would enable us to determine if it really is too old.
If you really wish to disable the update alert then the next time Software Update opens, select the update in the list then select "Ignore update" from SU's Update menu.

Time/date will not update

After updating software, the time/date will not update. My network is fine and I can get to the internet fine. Also will not accept my apple ID

Try restarting the Apple TV by removing ALL the cables for 30 seconds.

How to sever the update connection between my 2 iPhones?

I have an iPhone 4 and and 2 iPhone 5's that I use together. they have an auto update function that when I add a contact or note in one phone, it automatically updates the other 2 phones. I want to know how to sever the update function between phones. anyone know how to do?

I suspect the reason your devices are still syncing contacts is that they are syncing them with another service such as Google, Yahoo or and exchange account rather than iCloud. Go to Settings>Mail,Contacts,Calendars and tap each of your accounts to see if you have contacts syncing turned on. If you do, you'll have to turn that off in order to stop syncing them across your devices.
If only some of your notes are syncing across your devices, it's probably because not all of them belong to the iCloud account (iCloud only syncs contacts that belong to the iCloud account). If you want them all to sync with iCloud, you'll have to open the Notes app, tap Accounts, then open the notes in your non-iCloud accounts and copy and paste the text into new notes created in the iCloud account.
To have your photos sync between your phones, go to Settings>iCloud>Photos and make sure My Photo Stream is turned on. After that, new photos added to the camera roll will be added to your photo stream whenever the Camera app is closed, your photo is connected to wifi, and has at least 20% battery life remaining. You can access these photos in the My Photo Stream album within the Photos app.
To determine if you're backing up to iCloud, go to Settings>iCloud>Storage & Backup to see if iCloud Backup is turned on.
If you delete your iCloud account from your phone and want to keep your date, begin by saving any photo stream photos to your camera roll and emailing any notes that you are syncing with iCloud to yourself. Then go to Settings>iCloud, tap Delete Account, provide your password and choose Keep on My iPhone when prompted.
If you create a new account on one of your phones you can sync the data in the new account with your other phones in the future by simply signing into the same account on your other phones in Settings>iCloud. When you do, the iCloud data in the new account will download to them as well.

How to use the updated value in the same update statement

Hello,
I just wonder how to use the updated new value of other column in the same udpate statement. I am using Oracle 11.2, and want to update the two columns with one update statement as following:
create table tb_test (id number(5), tot number(5), mon_tot number(5));
update tb_test set (tot = 15, mon_tot = tot *15) where id = 1;
...I would like to update both tot and mon_tot column, the value of mon_tot shall be determinted by the new value of tot.
Thanks,
Edited by: 939569 on 1-Feb-2013 7:00 AM

Edit: example added
SQL> create table tb_test
2 ( id number(5)
3 , tot number(5)
4 , mon_tot number generated always as (tot*15) virtual
5 );
Table created.
SQL> insert into tb_test (id, tot) values (1, 5);
1 row created.
SQL> select * from tb_test;
        ID        TOT    MON_TOT
         1          5         75
1 row selected.
SQL> update tb_test
2 set    tot = 15
3 where id = 1;
1 row updated.
SQL> select * from tb_test;
        ID        TOT    MON_TOT
         1         15        225
1 row selected.

Missing update for a game app after updating ios7 any ideas how to get the update

Went to update a game app this morning, had already hit update when the i os7 update screen popped went through with the ios update but after ipad restarted the game update is completely missing any ideas how to get the update back no luck so far

Hello THEVIN7
The next step if it is not updating, would be to delete the app and then download it again. Check out the general troubleshooting for apps purchased form the App Store.
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/ts1702
Regards,
-Norm G.

How to debug the update FM

Hi,
I am facing a problem with the debugging of the update FM. I have enabled the update debugging and the system says that update debuging is on . even though the control did not go into the FM.
Do i need to check in any other transaction . Please give me the details steps on how to see the what is happening in the update FM.
Full marks are guaranteed.
thanks
sankar

Hi
I have got a clue from SAP help on how to debug the update FM see the below information from SAP
When you debug a program that calls function modules using the IN BACKGROUND TASK addition, they are processed in a background work process (additional internal session). If you set the In background task: Do not process option, the system collects the function calls, but does not start the background work process. The Debugger assigns a transaction ID, which identifies the background work process uniquely. You can now start the Debugger for the background work process using transaction SM58. You can select the function module concerned here, and then execute it via the Edit menu.
I have done everything that is said above , but could not find any entries in SM58
any suggestions
thanks
sankar

How long does the update for ios 7

How long does the update take on an ipad 2 for the ios 7?

The update has been going for 3 1/2 hours. The screen is black, if I hit the on/off button, the screen comes up with Itunes symbol with the usb cord. I assume it means I need to connect it to itunes through my computer.
I don't know if I lost my wifi connection during the update or not.
Does that sound right?

How to pull the Latest Time/Date of the update?

Similar Messages

Maybe you are looking for