How to pull the delta

kindly tell me the procedure how to pull the delta
regards
gurkiran

Hi,
You need to do initialization with data transfer first. Once that load is complete, change the update mode to delta in infopackage and now it will pull delta records,
Shashank

Similar Messages

  • How to delete the delta queue in the ECC

    Hi everyone!
    After I tryed to save a new Infopackage and I have the error :
    (Deltas already loaded for request REQU_41Q82WJLR9AZCE9ZMKQLVG3RG init. selection; no 2. init
    Message no. RSM1071
    Diagnosis
    Deltas have already been loaded for the init. selection of request REQU_41Q82WJLR9AZCE9ZMKQLVG3RG. A second initialization is therefore not possible with these selection conditions.
    Procedure
    If you want to carry out a new initialization, you have to choose selections that do not overlap.
    If you want to repeat the init. for the same selection, you have to delete the delta queue in the source system, and restart the delta process.
    As the error says - Deltas have already been loaded for the init. selection.
    Can you please give me some links/guids which describes how to  delete the delta queue in the source system, and restart the delta process.
    thank you, Ron

    Hi,
    Assuming as you need to the reinit for same selections.
    in such case you need to delete old init.
    how to delete init:
    Go to your info pack screen, menu Scheduler--> initialization options for source system--> here you can see the existing init, select init(green) and delete it.
    Later you can trigger your init info pack with selections.
    Thanks

  • I had to restore my computer to the factory settings, which means my itunes library was lost except for what was on my ipod nano.  How do pull the songs from my ipod back onto my computer?

    I had to restore my computer to the factory settings, which means my itunes library was lost except for what was on my ipod nano.  How do pull the songs from my ipod back onto my computer?  I have over 200 songs.  There is no way I can re-purchase them!  Any help?

    How to use your iPod to move your music to a new computer 

  • How to pull the Sale order number(sales document) to Accounting document

    Hi Gurus,
    How to pull the sale order number to the accounting document.
    Is any configuration needed to this.
    When i run the FBL5N Repoprt ,Sale order number (Sales document) is not getting updated to accounting document.It is diplaying as blank field.
    Thanks you.

    Hi Shivaji,
    In order to display the Sales document in the customer line item report, you need to add it as a special field thorugh customizing settings.
    Path - SPRO - FA-GL Accounting - GL Accounts - Line Items - Define special fields for finding and sorting data and in that select the table BSEG-and field VBEL2 (Sales document) and save/
    This will work. hope this helsp
    regards,
    radhika

  • I have am IPhone 3GS. I put all my pics in folders and now I dont know how to pull the folders off my phone on my laptop . I want to change up and delete some of them, Can anyone help

    I have am IPhone 3GS. I put all my pics in folders and now I dont know how to pull the folders off my phone on my laptop . I want to change up and delete some of them, Can anyone help

    You have to make the changes you want in the folders on your computer, then sync your new choices via iTunes.  iPhone, iPad and iPod touch: Syncing photos via iTunes, http://support.apple.com/kb/HT4236

  • How to pull the data into smartform after designing layout?

    how to pull the data into smartform after designing layout?

    call the smartform in your Driver program and pass your output internal tables in the smartforms paramaters
    Check the below Sample code.
    FORM label_print.
      DATA : g_fm_name TYPE rs38l_fnam,
             g_output  TYPE ssfcompop,
             g_control TYPE ssfctrlop,
             g_form TYPE tdsfname VALUE 'ZPRINT_LABELS',
             g_dest TYPE rspopname,
             g_printer TYPE rspoptype..
      REFRESH : i_out[],i_qals[].
      SELECT matnr maktx
             INTO TABLE i_out
             FROM makt
             FOR ALL ENTRIES IN i_mseg
             WHERE matnr = i_mseg-matnr
             AND   spras = sy-langu.
      SELECT prueflos objnr ersteldat erstelzeit matnr revlv charg mengeneinh
             INTO TABLE i_qals
             FROM qals
             FOR ALL ENTRIES IN i_mseg
             WHERE matnr = i_mseg-matnr
             AND   charg = i_mseg-charg.
    *FM to accept the device type and returns the short name of the output device
      CALL FUNCTION 'EFG_GET_PRINTER'
        EXPORTING
          x_no_dialog  = ' '
          x_obligatory = 'X'
        IMPORTING
          y_tddest     = g_dest
        EXCEPTIONS
          cancelled    = 1
          failed       = 2
          OTHERS       = 3.
    *device type name for the output device
      SELECT SINGLE patype                                  "#EC CI_NOFIELD
             FROM tsp03d
             INTO g_printer
             WHERE padest = g_dest.
    *printer setting
      g_control-no_dialog = 'X'.
      g_output-tdarmod = '1'.
      g_output-tdcopies = '001'.
      g_output-tddest = g_dest.
      g_output-tdprinter = g_printer.
      g_output-tdnewid = 'X'.
      g_output-tdimmed = 'X'.
      CLEAR wa_mseg.
      LOOP AT i_mseg INTO wa_mseg.
        READ TABLE i_out INTO wa_out WITH KEY matnr = wa_mseg-matnr.
    check for the status and filter the records
        CLEAR : wa_qals.
        LOOP AT i_qals INTO wa_qals WHERE matnr = wa_mseg-matnr
                                    AND charg = wa_mseg-charg.
          CALL FUNCTION 'STATUS_TEXT_EDIT'
            EXPORTING
              objnr            = wa_qals-objnr
              spras            = sy-langu
            IMPORTING
              line             = l_status
            EXCEPTIONS
              object_not_found = 1
              OTHERS           = 2.
          IF l_status CS 'LTCA' OR l_status CS 'SKIP'.
            DELETE i_qals.
          ENDIF.
        ENDLOOP.
        SORT i_qals BY ersteldat DESCENDING erstelzeit DESCENDING.
        IF i_qals IS INITIAL.
          l_msg = text-002.
        ELSE.
          READ TABLE i_qals INTO wa_qals INDEX 1.
          SELECT prueflos vbewertung
                 INTO TABLE i_qave
                 FROM qave
                 WHERE prueflos = wa_qals-prueflos
                 AND   kzart = 'L'.
          IF sy-subrc <> 0.
            l_msg1 = text-003.
          ENDIF.
          SORT i_qave.
          CLEAR : wa_qave.
          IF NOT i_qave IS INITIAL.
            READ TABLE i_qave INTO wa_qave INDEX 1.
            IF wa_qave-vbewertung = 'A'.
              l_msg = text-002.
            ELSEIF wa_qave-vbewertung = 'R'.
              l_msg1 = text-003.
            ELSE.
              l_msg1 = text-003.
            ENDIF.
          ENDIF.
        ENDIF.
        CLEAR : wa_ser03.
        READ TABLE i_ser03 INTO wa_ser03 WITH KEY mblnr = wa_mseg-mblnr.
    *Calling Smartform
        CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
          EXPORTING
            formname           = g_form
          IMPORTING
            fm_name            = g_fm_name
          EXCEPTIONS
            no_form            = 1
            no_function_module = 2
            OTHERS             = 3.
        LOOP AT i_objk INTO wa_objk WHERE obknr = wa_ser03-obknr.
    *Calling FM generated from the smartform
          DATA : l_date(10) TYPE c,
                 l_date1(10) TYPE c,
                 l_date2(10) TYPE c,
                 l_date3(10) TYPE c,
                 l_hyphen(1) TYPE c VALUE '-'.
          CLEAR : l_date,l_date1,l_date2,l_date3.
          l_date1 = wa_mseg-vfdat+0(4).
          l_date2 = wa_mseg-vfdat+4(2).
          l_date3 = wa_mseg-vfdat+6(2).
          CONCATENATE l_date1 l_hyphen l_date2 l_hyphen l_date3 INTO l_date.
          CALL FUNCTION g_fm_name
            EXPORTING
              control_parameters = g_control
              output_options     = g_output
              user_settings      = ' '
              g_matnr            = wa_mseg-matnr
              g_mat_text         = wa_out-maktx
              g_batch            = wa_mseg-charg
              g_rev              = wa_qals-revlv
              g_edate            = l_date
              g_lot              = wa_qals-prueflos
              g_qty              = wa_mseg-erfmg
              g_uom              = wa_mseg-erfme
              g_serial           = wa_objk-sernr
              g_smsg             = l_msg
              g_fmsg             = l_msg1
            EXCEPTIONS
              formatting_error   = 1
              internal_error     = 2
              send_error         = 3
              user_canceled      = 4
              OTHERS             = 5.
          CLEAR  g_output-tdnewid.
        ENDLOOP.
        IF sy-subrc <> 0.
          CLEAR : l_date,l_date1,l_date2,l_date3.
          l_date1 = wa_mseg-vfdat+0(4).
          l_date2 = wa_mseg-vfdat+4(2).
          l_date3 = wa_mseg-vfdat+6(2).
          CONCATENATE l_date1 l_hyphen l_date2 l_hyphen l_date3 INTO l_date.
          CALL FUNCTION g_fm_name
            EXPORTING
              control_parameters = g_control
              output_options     = g_output
              user_settings      = ' '
              g_matnr            = wa_mseg-matnr
              g_mat_text         = wa_out-maktx
              g_batch            = wa_mseg-charg
              g_rev              = wa_qals-revlv
              g_edate            = l_date
              g_lot              = wa_qals-prueflos
              g_qty              = wa_mseg-erfmg
              g_uom              = wa_mseg-erfme
              g_serial           = wa_objk-sernr
              g_smsg             = l_msg
              g_fmsg             = l_msg1
            EXCEPTIONS
              formatting_error   = 1
              internal_error     = 2
              send_error         = 3
              user_canceled      = 4
              OTHERS             = 5.
          CLEAR g_output-tdnewid.
        ENDIF.
      ENDLOOP.
      IF sy-subrc = 0.
        MESSAGE i000(zm).
      ENDIF.
    ENDFORM.                    " label_print

  • How to pull the text for InfoObject in APD

    Hi All,
    I have a requirement where in I have to combine the data from 2 InfoObjects using an APD based on some conditions.
    I need to bring in the text for these infoObjects and there attributes too.
    The proposed solution from my side for pulling the text is
    u2022     Getting the text from the text table u2013 this is working fine but the performance is not good.
    u2022     Making a query above the object and taking the output as the APD input. Now, in the query , I have selected the display option u2018key and textu2019 but when I am using this query as input for the APD, I am not getting the text.
    Please let me know how to get the text using the query output and/ or are there any other approach to get the text of an infoObject.
    Thanks & Regards
    Abhi

    Hi,
    It is possible to read the text tables of the infobject, for eg  In material you can use table /BI0/TMATERIAL
    You have to select a Datasource as the 'Database table  and use /BI0/TMATERIAL  as one of the underlying tables and then choose another datasource with /BI0/MMATERIAL as the underlying table.
    Now that you have all the data that is needed you can use the join to connect the above two datasources .Select the join condition (material in this case) and the fields that you would like to be have to the next level from the individual tables that you have selected earlier.
    I guess if you work in this way you might get the results that you are looking forward quite easily without writting code.
    Let me know if it helps.
    Regards
    Ankit

  • How to pull the document stored in external storage system ?

    Hi,
    We are having one external storage medium to store( planning to do so) SAP documents. In our case it is filenet server.
    My concern is .
    How can we pull the doc from the filenet server (external storage medium)?. I am in need, how and what an abap development team needs to be done?.
    Can anyone help in this regard ....to get the best logic and best technique ....!!!
    Thanks in advance
    Pons.

    Hi Ponnuchamy,
    to solve your issue RFC is an ideal one ,basically it consists of sender and receiver profiling destination configuration etc.
    Chk these links for further clarification
    http://help.sap.com/saphelp_nw2004s/helpdata/en/5a/97a066223e440b8ead3da027b17d9e/content.htm
    http://help.sap.com/saphelp_46c/helpdata/en/22/0424ba488911d189490000e829fbbd/frameset.htm
    Thanks and Regards
    Srikanth.P

  • How to pull the date parameter to appear in the report template?

    Hi Gurus, and Experts,
    I need to pull the date parameter I selected in BIP to appear in my report template? How to code this in BIP?
    Identifier are: dto and dfrom
    date fromat string: MM-dd-yyyy
    Regards,
    JP
    Edited by: user10955574 on Nov 10, 2010 2:38 AM
    Edited by: user10955574 on Nov 10, 2010 2:39 AM

    Declare the parameter in the template as
    <?param@begin:param1?>
    and use it as <?$param1?>

  • How to pull the Latest Time/Date of the update?

    Hi BW gurus,
    Hope everyone is fine.
    I have a doubt to meet my user requirement.
    I have a developed the infocubes and Infoset(combining only two master data infoprovider infoobjects) and created few reports on them.
    Now the requirement is
    "Client is asking for the latest date on which the data target is updated".
    Say if we run the infopackage on a particular day say "Dec 1st 2006"
    For example one cube is a full update, always by dropping the previously loaded data and one cube is updated with the delta update.
    For all the reports , if we run the query, the report should give the information stating that the latest update was made on "UPDATED DATE=Dec 1st 2006".
    how to achieve this?
    Please somebody help me out.
    Please tell me the step by step that I need to follow to achieve this.
    Any kind of help is appreciated.
    I am still in DEV.
    Thanks in advance,
    Regards
    Sam Mathew

    Hello
    This can be achieved
    First add an infoobject to your Data targets for Update date
    Second , include the update date infoobject in your infosource
    Map the infoobject with the field sys-datum which is current system date
    So whenever you execute an infopackage, the sys-datum field will pick up the current date at which it is executed.
    This is what you want in BW as latest update date of data target
    Regards
    Ganesh N

  • How to pull the data using READ_TEXT

    Hi,
        I was trying to use the READ_TEXT function module to pull the data from the sales order, but i am not sure what are the values exactly i need to pass.
    ID
    LANGUAGE
    NAME
    OBJECT
    Since the above parameters are mandatory to get the text from sales order ... can you please suggest me. We are using customized screen ... if user enteres the data in the long text field in the customized screen - it should be updated in the sales order... how can i achieve... can any one suggest me
    regards
    jaya

    Hi,
    In that text TC --> come to change mode >menu goto->header.
    There you find all info.
    aRs

  • HOw to rollback the delta updation

    HI,
    By mistake one my teamate had update the delta to ful updation. HOw to roll back the delta updation ?
    thanks
    sangram

    Sangam
    if u have deleted the init request from the cube, u won't have data for the same in the cube!!
    First check if the init flag still exist. For this go in the infopckge-> scheduler-> init flags.If not set this flag on.
    So you didn't delete the initialize request from Data mart and at Source system.
    Then go to T.code RSA7 and check the data source was exit or not. If the data source exit then you can fetch the data by delta update method other wise again you need to initialize it..
    Hope this helps
    Thnaks
    Sat

  • How to pull the root level XML tags in the XML source-SSIS?

    Hi All,
    Can anyone please help out with the following requirement?
    There is a XML file data which I need to pull it to database. Please see the attached XML file.
    Question: When I am trying to pull the root level data (i.e. CreationDateTime and FileNumber) from XML source in the dataflow, the respective tag is not seen in the input. Can anyone help me how can I get those values in my input to pull the data to Database?
    Thanks & Regards,
    Sri

    Hi Sri,
    In SQL Server Integrated Services, we can generate XML Schema (XSD) file based on a XML file with XML Source Editor. For more details, please refer to the following steps:
    Double-click the XML Source in the Data Flow Task. 
    Browse the XML file for the XML location.
    Click the Generate XSD button to generate an XSD file.
    If there are any other questions, please feel free to ask.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • How to set the delta for existing generic data source

    Hi BW Guru's
    I have a problem,actually i have a exsting generic data source"ZFRBHRCHY". Master data Object ZFRBHRCHY  is getting laoded from all some R/3 Clusters on a Daily Basis. It is full load and takes 4 to 5 Hours, but number of added records(2000) are very less,while total records are more(40Lks).For avoiding this larger load time every day,i want to implement delta extraction for this.
    How to implement this,(i want steps for this) .
    Thanks in advance,
    Regards
    reddy

    yeas agree with sanakar,
    this field which shankar is talking about must be entry date (if u delta timestamp is date, u will also have to mention this table field name in definition of delta), this means that this field will catch last change to the record, so that it will be delta enabled based on the latest change date. This is very important becuase if u use date like posting date to the delta then back dated posting will not captured in to the delta, as delta for this back date is already been done.
    Hope u understand this.

  • How to catch the delta of generic datasource created on table EBAN?

    Hi Guru,
    I am facing a problem about the delta of generic datasource i created on table EBAN.
    when I convert a PR into PO, this PR was created  several month ago, this PR will not be caught into delta package.
    how to get this PR again after it was converted into a PO?
    many thanks.
    brgds/steve

    hi,
    If you have any fields(calday,timestamp,nemric pointer) in your table , using this fields any one we can enable delta.otherwise one option is there but your table is small valoum of datas.
    first data load(full) r3 to bw side cube,then using open hub service download data from cube to any file (excel ,csv) then r3 side create one table using that flat file, then load download file to r3 new table using (LSMW - tcode r3 side).
    now compare your genric extroction table and new table using ABAP coding , then you have any new record or changed find update new table first then BW side .
    using this type we can enable delta for genric extrocation.
    regards,
    sundar.

Maybe you are looking for