How to put my own logo in initial screen in EP6.0

Hi,
how to put my own logo in initial screen(browser screen) and also welcome screen, pls give me clarification steps. it's very urgent.
Regards,
Jagadish Babu Kanikanti.

hi jagadish,
To change logon image we need to modify the com.sap.portal.runtime.logon.par.bak file
import this par file into netweaver developer studio.under the folder portal-inf->private->jsp there are a few standard jsps available.
edit the umlogonpage.jsp.
Bring the image to the middle of the page by using html tags.
Move the image to irj/root folder.
export your par file
Edit the authschemes.xml from usr/sap/<instance>/JC00/jeee/configtool
and replace. com.sap.runtime.logon name to your new par file name and change the authshceme.xml with a new file name and upload it again.
Also see this for more information
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/371e9d90-0201-0010-c39c-fd2956154ab3
hope it helps....
regards,
Ganesh.N

Similar Messages

Can u tell me how i put my own dvds into itunes so i can put them onto my iphone4 myself as i have got 100s

hi there i want to no how i put dvds into itunes so i can put them onto my iphone4 myself as i have got 1000s cheers

Since you are referring to commercial DVDs, they are all encrypted to prevent copying. In the US (and other places) it violates the law to use software to bypass encryption, so the Terms of Use here prohibit discussions on how to accomplish this. You might want to consider using a search engine instead.

How to validate customer number in FD32 initial screen

I need to validate customer number in FD32 initial screen. It should allow only Payers but not sold to

I think you wont get MIC no instandard SAP

How to put F4 facility in the selection screen using

HI Experts,
i have a query ..
i want to put F4 facility in the selection screen and The F4 help for the order number (chvw-aufnr) on the selection screen should be the same like the F4 help for order number in transaction COOIS.. PLease provide support in this regard.
Its urgent..An early reply will be highly appreciated.
Regards.
Neeraj

See the following ex:
TYPES: BEGIN OF TY_MBLNR,
 MBLNR LIKE MKPF-MBLNR,
 END OF TY_MBLNR.
DATA: IT_MBLNR TYPE STANDARD TABLE OF TY_MBLNR WITH HEADER LINE.
data: it_ret like ddshretval occurs 0 with header line.
At selection-screen on value-request for s_mat-low.
Select MBLNR from mkpf into table it_mblnr.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
DDIC_STRUCTURE = ' '
 RETFIELD = 'MBLNR'
PVALKEY = ' '
DYNPPROG = ' '
DYNPNR = ' '
DYNPROFIELD = ' '
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
 VALUE_ORG = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
 TABLES
 VALUE_TAB = IT_MBLNR
FIELD_TAB =
 RETURN_TAB = IT_RET
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF SY-SUBRC = 0.
 read table it_ret index 1.
 move it_ret-fieldval to S_mat-low.
ENDIF.

HT1550 how to put my own ring tone

How can I change ring tone by putting a song?

hi jagadish,
To change logon image we need to modify the com.sap.portal.runtime.logon.par.bak file
import this par file into netweaver developer studio.under the folder portal-inf->private->jsp there are a few standard jsps available.
edit the umlogonpage.jsp.
Bring the image to the middle of the page by using html tags.
Move the image to irj/root folder.
export your par file
Edit the authschemes.xml from usr/sap/<instance>/JC00/jeee/configtool
and replace. com.sap.runtime.logon name to your new par file name and change the authshceme.xml with a new file name and upload it again.
Also see this for more information
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/371e9d90-0201-0010-c39c-fd2956154ab3
hope it helps....
regards,
Ganesh.N

How to put a value in a selection screen parameter

how do i forcefully put a value to a field in the selection screen.
i mean during runtime.
and it's a parameter not a selection-option.
thanks

Hi,
Check this sample code.It can help you.Basically you need to use 'DYNP_VALUES_READ' in at selection-screen on value-request for s_posnr-low.
tables : vbap. " Sales Document: Item Data
 Constant Declaration *
CONSTANTS:
C_X TYPE C VALUE 'X'. " Translate to Uppercase
 Variable Declaration *
Variable for Table index
data v_sytabix like sy-tabix.
Variable for Program name
data L_NAME LIKE SYST-REPID.
Range for getting values form selection screen
DATA: BEGIN OF range1 OCCURS 0,
 SIGN(1),
 OPTION(2),
 LOW LIKE vbap-vbeln,
 high like vbap-vbeln,
 END OF range1.
Internal table for Report output
data: begin of i_vbap occurs 0,
 vbeln like vbap-vbeln, " Sales Document
 posnr like vbap-posnr, " Sales Document item
 end of i_vbap.
Internal table for output to the F4 help
data: begin of I_DISPLAY occurs 0,
 vbeln like vbap-vbeln, " Sales Document
 posnr like vbap-posnr, " Sales Document item
 end of I_DISPLAY.
Internal table for return value form function module
DATA: BEGIN OF I_RETURNVAL OCCURS 0.
 INCLUDE STRUCTURE DDSHRETVAL. " Interface Structure Search
DATA: END OF I_RETURNVAL.
Internal table for F4 help field heading
DATA: I_FIELDTAB LIKE DFIES OCCURS 0 WITH HEADER LINE.
Internal table for getting screen values from selection screen
data L_SCR_FIELDS LIKE DYNPREAD OCCURS 1 WITH HEADER LINE.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME title text-001.
select-options:
 S_VBELN for vbap-vbeln no intervals,
 S_POSNR for vbap-posnr no intervals.
SELECTION-SCREEN end OF BLOCK B1.
at selection-screen on value-request for s_posnr-low.
clear: L_SCR_FIELDS, I_FIELDTAB, i_display, I_RETURNVAL.
refresh: L_SCR_FIELDS, I_FIELDTAB, i_display, I_RETURNVAL.
L_NAME = SYST-REPID.
MOVE 'S_VBELN-LOW' TO L_SCR_FIELDS-FIELDNAME.
APPEND L_SCR_FIELDS.
Call the Function module DYNP_VALUES_READ to get the values form
selection screen
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 DYNAME = L_NAME
 DYNUMB = SYST-DYNNR
 TRANSLATE_TO_UPPER = C_X " X
 TABLES
 DYNPFIELDS = L_SCR_FIELDS
 EXCEPTIONS
 INVALID_ABAPWORKAREA = 1
 INVALID_DYNPROFIELD = 2
 INVALID_DYNPRONAME = 3
 INVALID_DYNPRONUMMER = 4
 INVALID_REQUEST = 5
 NO_FIELDDESCRIPTION = 6
 INVALID_PARAMETER = 7
 UNDEFIND_ERROR = 8
 DOUBLE_CONVERSION = 9
 STEPL_NOT_FOUND = 10
 OTHERS = 11
IF SY-SUBRC eq 0.
 LOOP AT L_SCR_FIELDS.
 range1-sign = 'I'.
 range1-option = 'EQ'.
 range1-low = L_SCR_FIELDS-FIELDVALUE.
 range1-high = space.
 append range1.
 ENDLOOP.
ENDIF.
F4 help Field headings
I_FIELDTAB-TABNAME = 'I_DISPLAY'.
I_FIELDTAB-FIELDNAME = 'VBELN'.
I_FIELDTAB-POSITION = '1'.
I_FIELDTAB-OUTPUTLEN = '10'.
I_FIELDTAB-INTTYPE = 'C'.
I_FIELDTAB-INTLEN = '10'.
APPEND I_FIELDTAB.
I_FIELDTAB-FIELDNAME = 'POSNR'.
I_FIELDTAB-POSITION = '2'.
I_FIELDTAB-OFFSET = '10'.
I_FIELDTAB-OUTPUTLEN = '6'.
I_FIELDTAB-INTTYPE = 'N'.
I_FIELDTAB-INTLEN = '6'.
APPEND I_FIELDTAB.
Retrieve sales document, Sales document item from table Sales
Document: Item Data(VBAP).
Primary keys used for selection: VBELN
select vbeln posnr from vbap
 into table i_display
 where vbeln in range1.
Call the function module F4IF_INT_TABLE_VALUE_REQUEST for F4 values
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 RETFIELD = 'POSNR'
 WINDOW_TITLE = 'Line Item'
 VALUE_ORG = 'S'
 MULTIPLE_CHOICE = C_X " (for muliple selection)
 TABLES
 VALUE_TAB = I_DISPLAY
 FIELD_TAB = I_FIELDTAB
 RETURN_TAB = I_RETURNVAL
 EXCEPTIONS
 PARAMETER_ERROR = 1
 NO_VALUES_FOUND = 2
 OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
Star for For single values
READ TABLE I_RETURNVAL INDEX 1.
 S_POSNR-LOW = I_RETURNVAL-FIELDVAL.
End for the single values
Start For multiple selection
 loop at i_returnval.
 s_posnr-sign = 'I'.
 s_posnr-option = 'EQ'.
 s_posnr-low = I_RETURNVAL-FIELDVAL.
 append s_posnr.
 endloop.
 sort s_posnr.
 read table s_posnr index 1.
End for multiple selection
ENDIF.
 Start-of-selection *
start-of-selection.
Retrieve sales document, Sales document item from table Sales
Document: Item Data(VBAP).
Primary keys used for selection: VBELN
select vbeln posnr from vbap
 into table i_vbap
 where vbeln in s_vbeln
 and posnr in s_posnr.
if the above selection is successful continue the process else exit *
form the report
if sy-subrc ne 0.
 message e002 with 'No data to display'.
endif.
end-of-selection.
if not i_vbap[] is initial.
 loop at i_vbap.
 write:/ i_vbap-vbeln, i_vbap-posnr.
 endloop.
endif.

How to put "selection options without intervals" on screen painter?

Hello all,
 I need to put a field for pernr(personal number) on screen painter (module program) and user should be able to enter a list of pernr's to process. I know in report program I can do this by:
SELECT-OPTIONS: s_lpernr FOR pa001-pernr NO INTERVALS.
How can I get this work on sccreen painter in module programming? How can I add a field on screen painter with a range without intervals? Please let me know.
Thanks.
Mithun.

You can also do this using the function module COMPLEX_SELECTIONS_DIALOG.
REPORT ZTEST_SCREEN .
DATA : BEGIN OF IT_DYNPFIELDS OCCURS 3.
 INCLUDE STRUCTURE DYNPREAD.
DATA : END OF IT_DYNPFIELDS.
DATA: TEST(10) TYPE C.
RANGES: R_UNAME FOR SY-UNAME.
DATA: V_USERNAME LIKE SY-UNAME.
DATA : V_PROG LIKE D020S-PROG VALUE 'ZTEST_SCREEN',
 V_DNUM LIKE D020S-DNUM VALUE '0100'.
CALL SCREEN 100.
*& Module STATUS_0100 OUTPUT
* text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'TEST'.
* SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
 WHEN 'BACK'.
 LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module GET_CURSOR_USERNAME INPUT
* text
MODULE GET_CURSOR_USERNAME INPUT.
REFRESH IT_DYNPFIELDS.
CLEAR IT_DYNPFIELDS.
MOVE 'V_USERNAME' TO IT_DYNPFIELDS-FIELDNAME.
APPEND IT_DYNPFIELDS.
CLEAR IT_DYNPFIELDS.
CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 DYNAME = V_PROG
 DYNUMB = V_DNUM
 TRANSLATE_TO_UPPER = 'X'
 TABLES
 DYNPFIELDS = IT_DYNPFIELDS
 EXCEPTIONS
 INVALID_ABAPWORKAREA = 1
 INVALID_DYNPROFIELD = 2
 INVALID_DYNPRONAME = 3
 INVALID_DYNPRONUMMER = 4
 INVALID_REQUEST = 5
 NO_FIELDDESCRIPTION = 6
 INVALID_PARAMETER = 7
 UNDEFIND_ERROR = 8
 DOUBLE_CONVERSION = 9
 STEPL_NOT_FOUND = 10
 OTHERS = 11.
IF SY-SUBRC EQ 0.
 READ TABLE IT_DYNPFIELDS WITH KEY FIELDNAME = 'V_USERNAME'.
 IF SY-SUBRC = 0.
 V_USERNAME = IT_DYNPFIELDS-FIELDVALUE.
 ENDIF.
ENDIF.
PERFORM GET_MULTIPLE.
ENDMODULE. " GET_CURSOR_USERNAME INPUT
*& Form GET_MULTIPLE
* text
* --> p1 text
* <-- p2 text
FORM GET_MULTIPLE .
* Dynamically holding Field name
FIELD-SYMBOLS: <FST> TYPE STANDARD TABLE.
IF R_UNAME[] IS INITIAL.
 IF NOT V_USERNAME IS INITIAL.
 R_UNAME-SIGN = 'I'.
 R_UNAME-OPTION = 'EQ'.
 R_UNAME-LOW = V_USERNAME.
 APPEND R_UNAME.
 CLEAR R_UNAME.
 ENDIF.
ENDIF.
ASSIGN R_UNAME[] TO <FST>.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
 EXPORTING
 TITLE = 'Select Multiple Value'(059)
 TEXT = 'Finish Group'(058)
 SIGNED = 'X'
 LOWER_CASE = ' '
 NO_INTERVAL_CHECK = 'X'
 JUST_DISPLAY = ' '
 JUST_INCL = 'X'
 TABLES
 RANGE = <FST>
 EXCEPTIONS
 NO_RANGE_TAB = 1
 CANCELLED = 2
 INTERNAL_ERROR = 3
 OTHERS = 4.
IF SY-SUBRC EQ 0.
 READ TABLE R_UNAME INDEX 1.
 IF SY-SUBRC = 0.
 V_USERNAME = R_UNAME-LOW.
 ENDIF.
ENDIF.
ENDFORM. " GET_MULTIPLE

I figured out how to put photos onto the Apple TV Screen-Saver

I was having trouble using photos with the Apple TV screen saver.
I got as far as putting them into the photo stream, but some photos were crooked, with no way of editing them.
I called Apple, they didn't know what to do.
I am submitting this after calling Tech Support at Apple, wanting to give them the information...don't know if they really took it to heart. I figured this out myself with the help of my son.
I want to share it with others.
So, let me begin:
I texted my son, he had set it up once for me, but I deleted the file.
So he told me to edit the photos on my iPhone, in my photostream. Well there wasn't any to edit. The file was not there.
So going through my PC, I clicked on "My Computer"
I clicked onto "iCloud Photos"
I get what looks like the above photo. Click on "New photo stream"
You will then get this screen. In the "to" field, send it to yourself. And then name your file, click "next".
It will then give you this screen:
When all the photos load, click done.
THEN, go to your Apple TV.
Settings:
Click on "Screen Saver"
Click on "Photos"
Click on "iCloud Photos"
Click on the file you named on your PC.
Now you will find, like me on "previewing" that some pictures were not straight.
Go to your iPhone, click on your "Camera Roll"
Click on "Photo Stream"
Then you will see your file that you created for your screen saver.
Click onto your file, from there you can click on the crooked photo and click "Edit", it asks to save it to "Camera Roll". Click there.
What I did then was delete the crooked picture and at the bottom of this file within your "Photo Stream", go to the bottom of the photos, it will have a tile with a plus sign in it. Click on that to add from your "Camera Roll" the corrected picture.
Do this for every crooked photo.
ALL DONE!
When done, go to your "Camera Roll" and delete these photos.

This issue is resolved, through the generous advice of folks on this page.
See my reply to Apple (2nd gen.) photo shuffle. The Fix that I posted works for Apple 3 Gen, which was just purchased Dec. 27,2013.
Thanks to all

How to put drop down box in selection screen

Hi all,
I have to create a selection screen.
in that i have to use a drop down box for the text box.
how to do that.
thanking u.
with regards,
giri.

HI
Check thi ssample code -
REPORT ZTESTPRG.
TYPE-POOLS: VRM.
DATA: NAME TYPE VRM_ID,
LIST TYPE VRM_VALUES,
VALUE LIKE LINE OF LIST.
PARAMETERS: PS_PARM(10) AS LISTBOX VISIBLE LENGTH 10.
AT SELECTION-SCREEN OUTPUT.
NAME = 'PS_PARM'.
VALUE-KEY = '1'.
VALUE-TEXT = 'LINE 1'.
APPEND VALUE TO LIST. VALUE-KEY = '2'.
VALUE-TEXT = 'LINE 2'.
APPEND VALUE TO LIST.
CALL FUNCTION 'VRM_SET_VALUES' EXPORTING ID = NAME VALUES = LIST.
START-OF-SELECTION.
WRITE: / 'PARAMETER:', PS_PARM.
Hope this helps.
OR
You can use the F4 function module or use a List box
see the sample codes
See the following ex:
TYPES: BEGIN OF TY_MBLNR,
MBLNR LIKE MKPF-MBLNR,
END OF TY_MBLNR.
DATA: IT_MBLNR TYPE STANDARD TABLE OF TY_MBLNR WITH HEADER LINE.
data: it_ret like ddshretval occurs 0 with header line.
At selection-screen on value-request for s_mat-low.
Select MBLNR from mkpf into table it_mblnr.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
RETFIELD = 'MBLNR'
PVALKEY = ' '
DYNPPROG = ' '
DYNPNR = ' '
DYNPROFIELD = ' '
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
TABLES
VALUE_TAB = IT_MBLNR
FIELD_TAB =
RETURN_TAB = IT_RET
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF SY-SUBRC = 0.
read table it_ret index 1.
move it_ret-fieldval to S_mat-low.
ENDIF.
Go through the test program.
REPORT Ztest_HELP .
TABLES : MARA.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : P_MATNR(10) TYPE C.
SELECTION-SCREEN END OF BLOCK B1.
DATA : BEGIN OF ITAB OCCURS 0,
MATNR TYPE MATNR,
END OF ITAB.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_MATNR.
SELECT MATNR
FROM MARA
INTO TABLE ITAB
UP TO 10 ROWS.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'MATERIAL NUMBER'
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'P_MATNR'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = ITAB
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3.
LIST BOX
Input : p_char = 'J'.
Press: enter
List Box of Month = January, June , July.
REPORT ZLIST_VALUES.
TYPE-POOLS vrm.
tables:
spfli.
parameters: p_char type c.
parameters:
p_month(12) as listbox visible length 20,
p_year as listbox visible length 20 .
DATA:
t_table TYPE STANDARD TABLE OF vrm_value,
t_table1 TYPE STANDARD TABLE OF vrm_value,
vrm_values1 LIKE LINE OF t_table.
DATA:
t_year TYPE STANDARD TABLE OF vrm_value.
data: w_year(4) type n value '2000'.
at selection-screen output.
vrm_values1-key = 'a'.
vrm_values1-text = 'January'.
APPEND vrm_values1 TO t_table.
vrm_values1-key = 'p'.
vrm_values1-text = 'February'.
APPEND vrm_values1 TO t_table.
vrm_values1-key = 'q'.
vrm_values1-text = 'March'.
APPEND vrm_values1 TO t_table.
vrm_values1-key = 'r'.
vrm_values1-text = 'April'.
APPEND vrm_values1 TO t_table.
vrm_values1-key = 's'.
vrm_values1-text = 'May'.
APPEND vrm_values1 TO t_table.
vrm_values1-key = 't'.
vrm_values1-text = 'June'.
APPEND vrm_values1 TO t_table.
vrm_values1-key = 'u'.
vrm_values1-text = 'July'.
APPEND vrm_values1 TO t_table.
vrm_values1-key = 'v'.
vrm_values1-text = 'August'.
APPEND vrm_values1 TO t_table.
vrm_values1-key = 'w'.
vrm_values1-text = 'September'.
APPEND vrm_values1 TO t_table.
vrm_values1-key = 'x'.
vrm_values1-text = 'October'.
APPEND vrm_values1 TO t_table.
vrm_values1-key = 'y'.
vrm_values1-text = 'November'.
APPEND vrm_values1 TO t_table.
vrm_values1-key = 'z'.
vrm_values1-text = 'December'.
APPEND vrm_values1 TO t_table.
t_table1[] = t_table.
delete t_table1 where text+0(1) <> p_char.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = 'p_month'
values = t_table1
EXCEPTIONS
ID_ILLEGAL_NAME = 1
OTHERS = 2.
do 10 times.
add 1 to w_year.
vrm_values1-key = sy-index.
vrm_values1-text = w_year.
APPEND vrm_values1 TO t_year.
enddo.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = 'p_year'
values = t_year
EXCEPTIONS
ID_ILLEGAL_NAME = 1
OTHERS = 2.
start-of-selection.
write: p_month.

How to Put Serial Number in "UUT Information" Screen

Hi guys!
I'm reading the Serial Number using a Cemera and a 2D code on Units, and I would like to put the serial number in the corresponding box of "UUT Information".
At this time I'm puting the serial number on Report using "RunState.Caller.Locals.UUT.SerialNumber".
I need to keep the "UUT information" screen on front.
Thank you

When I click "Next UUT" (without a serial number on the box), I'm reading the serial number using Camera and LabView signal procesing, I would like to write the readed serial number to UUT information Box...
It's any way to do that without modify and overide the PreUUT?
Thanks

How to put Mandatory option for selection screen fields in ABAP Queries

Hi Experts
Can anyone tell me how to put mandatory option for the selection screen fields in ABAP Queries.
Manually I had written code in the At Selection Screen option in infoset to display error message if that field is blank.
But I need to display the selection fields with the tick mark (obligatory mark).
How to do this?
Appropriate answers will be awarded

Hi
For parameter option
parameters : p_kunnr type kna1-kunnr obligatory.
For select option
select-options: s_date for vbak-erdat obligatory.
Plz rewards points ,
Regards ,
Ganesh.

Add comany logo in SRM screen

Hi,
We are on SRM 5.0 , SP06, with ECC5.0 backend.Internal ITS.
I am trying to add the company logo in SRM screen (not login screen).
As per SAP Help. I uploaded the logo to files cube.gif and logo.gif in service BBPGLOBAL in transaction se80.
We have restarted the system. Still the logo doesnt appear on the SRM screens.
Is there anything else which I should do? Any specific cache memory to be cleared apart from restarting the server?
Regards,
Srivatsan

Hi
Please go through the few pointers which will definitely help ->
OSS note 861246
1) You can change mime files with transaction SE80 --> internet service --> BBPGLOBAL. Please don't forget to publish your files (local with SRM 5.0 integrated ITS).
2) You need to change the template to do this. Import your Logo as MIME object and replace the present logo with your new logo. Also, You can try to change this text in service BBPGLOBAL under HTML Templates -->LOGIN page. There you have a line "<title>SRM - Enterprise Buyer Welcome!</title>".May be you can change the text form here..I dont have access to system but you can give this a try...
Related links ->
Live Auction Applet Logo
Display of company logo in EBP
Add company logo to initial screen of EBP
regarding replacing logo in srmsus
regarding changing logo in SRM SUS
Change of Logo in Loginscreen
Re: ITS screens for SRM in EP with SSO
Re: Change Title "SRM - Enterprise Buyer" of SRM Webpages
Regards
- Atul

How to put Company Logo in a SAP R/3 Login Screen

Hi,
1)How can we put our own text in the login screen?
2) how do we put the company logo in the post login R/3 screen?
Regards,
Shobhit

Hi,
U can insert logo in both the cases.
Check this
http://www.sap-img.com/abap/alv-logo.htm
* Build report title
PERFORM build_report_title USING gd_report_title gd_logo.
DATA: gd_logo TYPE sdydo_value,
*& Form BUILD_REPORT_TITLE
* Build table for ALVtree header
* <-> p1 Header details
* <-> p2 Logo value
FORM build_report_title CHANGING
 pt_report_title TYPE slis_t_listheader
 pa_logo TYPE sdydo_value.
DATA: ls_line TYPE slis_listheader,
 ld_date(10) TYPE c.
* List Heading Line(TYPE H)
CLEAR ls_line.
ls_line-typ = 'H'.
* ls_line-key "Not Used For This Type(H)
ls_line-info = 'User Message Service'.
APPEND ls_line TO pt_report_title.
* Users name (Status Line- TYPE S)
ls_line-typ = 'S'.
ls_line-key = 'Name '.
ls_line-info = gd_myname.
APPEND ls_line TO pt_report_title.
* Status Line(TYPE S)
ld_date(2) = sy-datum+6(2).
ld_date+2(1) = '/'.
ld_date+3(2) = sy-datum+4(2).
ld_date+5(1) = '/'.
ld_date+6(4) = sy-datum(4).
ls_line-typ = 'S'.
ls_line-key = 'Date'.
ls_line-info = ld_date.
APPEND ls_line TO pt_report_title.
** Action Line(TYPE A)
* CLEAR ls_line.
* ls_line-typ = 'A'.
* CONCATENATE 'Report: ' sy-repid INTO ls_line-info SEPARATED BY space
* APPEND ls_line TO pt_report_title.
ENDFORM. "build_report_title
CALL METHOD gd_userlist->set_table_for_first_display
 EXPORTING
 is_hierarchy_header = gd_hierarchy_header
 it_list_commentary = gd_report_title
 i_logo = gd_logo
* i_background_id = 'ALV_BACKGROUND'
 i_save = 'A'
 is_variant = gd_variant
 CHANGING
 it_outtab = it_emptytab "Must be empty
 it_fieldcatalog = gd_fieldcat.

How can I put a facebook logo in my signature block without it appearing as an attachment to the receiver of the email?

How can I put a facebook logo in my signature block using the mail program without it appearing as an attachment to the receiver of the email?

Not sure what OS you're on, but...
Might see if this helps...
http://allforces.com/2006/04/14/css-signatures/

HOW TO USE OWN LOGO IN 'REUSE_ALV_COMMENTARY_WRITE'

HELLO THERE ,
CAN ANYBODY TELL ME HOW TO USE OWN LOGO IN 'REUSE_ALV_COMMENTARY_WRITE' ?
I HAVE TRIED THROUGH THE TRANSCATION 'OAOR' AND 'OAER' , BUT I'M UNABLE TO DO IT. SO CAN ANYBODY PLZ TELL ME ANY OTHER WAY?
REGARDS.

Hello NEON BLUE,
First step first upload u r log in the sap system using the below steps.
1. Goto the transaction OAER
2. Enter the class name as 'PICTURES'
3. Enter the class type as 'OT'
4. Enter the object key as the name of the logo you wish to give
5. Execute
6. Then in the new screen select Standard doc. types in bottom window
     Click on the Screen icon
     Now, it will ask for the file path where you have to upload the logo
7. Now you can use this logo in REUSE_ALV_COMMENTARY_WRITE
call the FM
    CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
      EXPORTING
        IT_LIST_COMMENTARY       = Y_I_LISTHEADER[]
I_LOGO                   =
I_END_OF_LIST_GRID       =
I_ALV_FORM               =

How to put my own logo in initial screen in EP6.0

Similar Messages

Maybe you are looking for