How to put percentage sign on the Y-axis scale

Hi all,
I want to draw a column chart to show the percentage share. And I want my Y-axis scale has '%' ended, like "10%, 20%, 30%..up to 100%". In my test, it seems that only numerical text can be shown on the Y-axis scale.
Are there any ways to implement what I want?
Thanks & regards,
Dicky

I just saw that this message is posted in the SAP NetWeaver Visual Composer area. VC does not use IGS charts. If you would use IGS charts my answer would be:
Hi Dicky,
in the Chart Designer go to the Value Axis Line properties and set the Format to "00 %". This should show what you are expecting.
Best regards
Matthias
Message was edited by:
Matthias Gemmel

Similar Messages

HOW TO PUT TWO PANNEL IN THE SAME PAGE

HI ALL
I NEED TO KNOW HOW TO PUT TWO PANNEL IN THE SAME PAGE TO FULLY UTILIZE FULL PAGE AREA BECAUSE THE PANNEL WIDTH IS TOO SMALL , SO I WANT TO MAKE THE PAPER CONTAIN TO PANNELS VERTICALLY.
THANK YOU

So Barb,
I like to use multiple desktops and move back and forth between then using gestures. At the moment I have 5 open: Chrome, Firefox, Safari, Photoshop CS 6 and a desktop. I use "gestures" to navigate between them:
Mac Basics: Multi-Touch gestures - Apple Support
and I use Mission Control (F3) to move the various desktops around in the order I want them.
Mac Basics: Mission Control - Apple Support
So say I'm searching for a photo to open in CS 6, I find it on the open desktop then hit select "open" in CS 6 and go to that folder in the select pane.
Even right now I'm typing this in Safari and "gesturing" back to Chrome where I did the search about multi touch and mission control. I drag copy the URL there and gestured back here to paste the URL into this text.
If you did a lot of photo searches, I set professional clients of mine in Chicago up with dual monitors (In this case you'd have an external monitor on extended desktop.). So all you need to do is just glance over at the second monitor slide your cursor over there open stuff up find your photo and go back to Photoshop and open it up.
Hope this helps.

How to put dead notes on the guitar software instrumet??

How to put dead notes on the guitar software instrumet??

a dead note is when you mute the chords, like on the smells like teen spirit riff

HOW TO PUT MOVIES BACK IN THE CLOUD ON IPAD

HOW TO PUT MOVIES BACK IN THE CLOUD ON IPAD

You can't put films in the cloud yourself, whether they will show in the cloud for redownloading depends upon what country that you are in, if the rights-holder allows redownloading, and if the film remains in your country's store. You can delete a film from your iPad via the Edit button at the top right of the film select ion screen in the Videos app or via Settings > General > Usage > Videos (that should also give you an Edit button top right of the screen or you can swipe/drag across a film form right-to-left) - but the film might not then show in the cloud for redownloading. If you haven't already done so you should connect the iPad to your computer's iTunes and do File > Devices > Transfer Purchases so that you can take your own backup copy of your downloads (apps, ibooks etc could also be removed from the store and not be redownloadable in the future).

How to put a check with the date

Hi,
I have created a ztable with 3 fields .
clientcode(3),
date,--date geneated
version--- fileversion
i need to update this table everytime i execute the data. Every time version shd get incremented when i execute the program. When i excute the program next day version shd be updated by '1'.
i wrote the code for version updated i'm not getting the logic how to put a check with the date.
SELECT *
   FROM zfi_enetflver
   INTO TABLE gt_flver.
SORT gt_flver DESCENDING.
CLEAR: gv_dt, v_file.
CONCATENATE sy-datum6(2) sy-datum4(2) INTO gv_dt.
READ TABLE gt_flver WITH KEY client_code = gv_clcd.
IF sy-subrc = 0.
    idx = sy-tabix.
    IF gt_flver-zdate = ' '.
      gt_flver-zdate = sy-datum.
    ENDIF.
    IF gt_flver-version = ' '.
      gt_flver-version = '001'.
      gv_filever = gt_flver-version.
      MODIFY gt_flver INDEX idx TRANSPORTING zdate version.
      MODIFY zfi_enetflver FROM TABLE gt_flver. "TRANSPORTING version.
      CONCATENATE 'E:\' 'ENET\' gv_clcd gv_dt '.' gt_flver-version INTO v_file.
    ELSE.
      gt_flver-version = gt_flver-version + 1.
      gv_filever = gt_flver-version.
      MODIFY gt_flver INDEX idx TRANSPORTING version.
      MODIFY zfi_enetflver FROM TABLE gt_flver .
      CONCATENATE 'E:\' 'ENET\' gv_clcd gv_dt '.' gt_flver-version INTO v_file.
    ENDIF.
ENDIF.
clientcode is the key field in ztable do i need to make date field key ??
please help me with the logic

You need to implement below logic:
1. check if field_date = sy-datum. in this case do nothing.
2. else . move sy-datum to field_date .
3. modify your internal table with field_date .
4. populate final table to database table .
hope you get it.

How to change the Y-axis scale for 100% stacked column to percentage ?

Hi,
I add a 100% stacked column chart to a report in Crystal Report for Enterprise. As default, the Y-axis scale shows value from 0 to 1 and the data labels display absoluted data value. Now I want the Y-axis scale to show value from 0% to 100% and the data labels to display percentage value.
Please tell me which option of the chart to adjust ?
Thanks
Mau Vu Huu
The default is like screenshot below:
I want it to display as screenshot below:
thanks
Mau Vu Huu

Looks like a bug in CR for Enterprise.
The same chart shows a scale from 0% to 100% in the CR 2011 designer whereas CR for Enterprise seems to show a number range from 0 to 1.
Here's a workaround:
1) Insert a Crosstab. 'Column' should be the field you wish to show on the 'X-axis'. 'Row' should be the field that you wish to stack up on the bars. Summary should be the measure field
2) Next, right-click one of the summary cells on the Crosstab > Select Format Total > Total > Check 'Show as Percentage of' > Grand Total > Row
3) Right-click the Crosstab > Select Create Chart from Crosstab Data
4) Suppress the section that holds the Crosstab
5) Right-click the chart > Edit Chart Type > Choose 'Stacked Column'
6) Highlight one of the numbers of the Y-axis > Select Format Total (Y) axis > Format > Currency > Choose 'Fixed' under 'Symbol Format' > Replace '$' under Symbol to '%' > Change Symbol Position to '-123$'.
-Abhilash

When I upload large streams of high frequency data the x axis scales incorrectly

I have data at 5 kHz for 20 seconds. when I upload this data into the report tab the x axis scales incorrectly and cuts off either the head or tail of the data. The x axis always rounds to the nearest second while i need it to start with the data. Any ideas?

Hi wpruitt3,
Take a look at this knowledge base article.
Best,
Kristen

How to add a PERCENTAGE sign to the formula

I was using %A in a fomula to calculate variance %age.
Because %A is based on absolute value that eliminates the sign it wont work for us.
I am planning to do direct calculation without %A to calculate pecent varaince but then I lose the % sign from the cell.
I am sure you can help.
I need to calculate %age and then also display % sign in the cell. For example the cell should show 20.00 % not just 20.00.
If I get a prompt reply not only I will be thankful will also give full credit.

Hi Ram,
you can display the % sign in the query report
In the formula select , instead of using percantage share , I think you can use either try with (%CT) or (%GT) and this will be available in percantage functions
I have done for one my report and able to display % sign.
kindly try with the above options if not able to achieve then let me know, I will provide the step by step doc.
thanks

How to deal with '$' sign in the class name?

I want to put my Java Applet game on my homepage. But the server which I set up my homepage doesn't support the file name like XXX$XXX.class, which has '$' sign in the file name. Would anyone can tell me how to deal with this problem? And how can I make the game work on my homepage? Thanks.

Don't forget, this include both concrete inner classes as well as any anonymous inner classes you create, like
myButton.addActionListener(new ActionListener()
// Yada Yada Yada

How to display NEGATIVE sign on the left side of a number in SMARTFORMS

Hi,
     In smartforms I'm trying to print some negative values, but the negative sign is displayed on the right hand side of the number.
How can I display the '-' sign on the left hand side of a number. I tried the logic &value(<), it works well in sap scripts. Why is it not working in smartforms ?
Eg :   I'm getting the output as 126.75 -
         I want : - 126.75

see this wiki which gives details for restrictions of formatting options (I guess you didn't declare the variable correctly, i.e. with the right data element): http://wiki.sdn.sap.com/wiki/display/ABAP/SAPscript#SAPscript-WhatarethevarioustextformattingoptionsinSAPscript%3F

How to put Company logo in the report?

Hi,
How am i going to include the company logo or a image file into my report?
What is the best tools?
I have try to use the "Link File" tool and it required me to specify the "Source Filename". So if I put the file path and filename in the "Source Filename", it's hardcoded...
How to specify the "Source Filename" at run time or any otherway so that it won't hardcoded?
Regards,
Cheong

Note that you can also use the read from file functionality.
If you have a character based column, then any layout field based on this column will have the Read From File property. If this is set to Yes, then reports will attempt to use the value of the column to read a file from the file system. You can also specify the type of the file (image, text, or even an image URL to read an image from over the web).
For example, if you have a column in the data model that returns a value ("c:\temp\mypicture.bmp"), and you set the Read From File property to Yes, and the File Format to be Image then at runtime, reports would look for c:\temp\myimage.bmp and return the value. And of course, since you can create a formula column in the data model then you can control the returned value as much as you like.
Hope this helps,
Danny

How to put chinese character in the Manifest file

Hi,
I want to know that how can we put chinese characters in the manifest file. Please suggest a solution.
Regards

[slightly confused stuff removed]Sorry, AmitChalwade123456, I know trolling can be very funny, but you're confusing the sh*t out of newbies with this almost-seems-usefull kind of talk.
Stop that.
And in case you really meant that seriously: Please refrain from giving advice with regard to encoding. What you posted is wrong (to put it mildly).

How to put line break in the text

Hi guys,
This is a simple problem.i don't know how to concat a line break while creating a text.
I am looping through the results of a query and want to form the text using the results.
For each row of the resultset,I want to create a new line in the text i create.
I was wondering how to put a new line in the text.
I thought I can concat '\n' ,but it does not work.
the code snippet in the procedure is :
for c1_rec in c1 loop
vMsg := ' There are ' || c1_rec.total ||
     ' documents of type ' || c1_rec.doc_type || '\n' ;
end loop;
Please give the solution.
Thanks in advance.

Thank you Mark.
I tried your suggestion.But line break is not working in email.
Here is how my code is
in procedure 1 ,i create the message String as :
for c1_rec in c1 loop
vMsg := vMsg || ' ' || today_str || ' - ' || c1_rec.total ||
     ' Total inbound documents from : ' || c1_rec.target_value || CHR(13)||CHR10) ;
dbms_output.put_line(' ' || vMsg);
end loop;
--here sending mail calling another procedure
sendmail( '[email protected]' ,'[email protected]' , 'Test Subject ' , vMsg );
In Procedure 2( i.e sendmail procedure )
i am preparing email server connection from and to adresses .Then i am preparing and sending message as
crlf VARCHAR2( 2 ):= CHR( 13 ) || CHR( 10 );
conn:= utl_smtp.open_connection( EmailServer, Port );
     utl_smtp.helo( conn, EmailServer );
     utl_smtp.mail( conn, SENDER);
     utl_smtp.rcpt( conn, RECEIVER )
mesg:= 'Subject: ' || SUBJECT || crlf ||
               'Date: '||TO_CHAR( SYSDATE, 'Dy, dd Mon yyyy hh24:mi:ss' )||
               crlf ||
               'From:'||SENDER|| crlf ||
               'To: '||RECEIVER || crlf ||
               'Content-Type: text/html; charset=ISO-8859-1' || crlf ||
               '' || crlf || MESSAGE ;
     utl_smtp.data( conn, mesg );
     utl_smtp.quit( conn );
even now the mail we are getting is not having the line break.I am having line break in dbms output,but not in the mail.
Is there any mistake how I am sending the mail.Or is there any other way we can put line break in the text
Thank you.

How to remove -ve sign from the deduction wagetype in payslip

Hi Experts,
Plz tell me how i can remove the -ve sign from the deduction column in
the Payslip.
Regards
TS

Hi ,
Do you just have to show the sign different in payslip and the RT .
Coz what it seems is that the RT is having a negative WT , so in order to make it positive you goto
PE51 , enter the form you are using and change the cumulation id for deduction wage type .
Hope this helps.
Regards,
SureshP

How to put two files with the same name into the same folder?

How can I put two files with the same name and the same extention into the same directory?
Is this even possible?
Thanks in advance.

Are you sure? I would be very surprised if that was the case.
How does the computer/filing system differentiate the files, if not by their names?
How do you tell the computer which one you want? (On the command line.)

How to put percentage sign on the Y-axis scale

Similar Messages

Maybe you are looking for