How to Raise Alerts from the fields of Mapping?

HI,
We had a very typical requirement for our client.
Scenarios is IDOC to multiple files else consider a simple file to file scenario.
Source structure contains some 5 fields and the target also remains the same 5 fields.
Assume SERNO presents in both structures.
The issue here is i need to check for a Target SERNO field should accept only numerical value, there is a possibilty of coming alphanumeric and sometimes with specialcharacter appended numeric. i have developed a udf which allows only numeric.
The mapping is getting failed if alphanumeric or special character exists in that field.
But, the client requires an alert mentioning that this mapping is failed due to the problem in Source SERNO field so that he can easily debug and resubmit those idocs.
I want to know is it possible to raise alerts at field levels.
Thanks,
--Kishore

Hi Raja,
This is a new development and we dont hve any Alert framework right now exist, i believe even the alert category its not possibel to drill down to the field level.
if its possible could you please elaborate.
We have many fileds to check as similarly defined above example SERNO, so if the alerts are triggered @ filed level that are failed that will be a great..
My Ultimate requirement is to notify client that due to this field the mapping was occured and alert should throw some light on to locate the error at the field level.
Please suggest how to procced..
Thanks,
--Kishore

Similar Messages

How to extract data from the fields present in two or three tables

Hi Experts,
I have a scenario where i have to extract data from the fields of different tables. e.g. let there 2 tables which have some number of fields . I want the data of 3 fields each from these 2 tables. How can i get that??
Sam

Hi
You can create view in tcode se11..
here you include all tables from which you want to fetch the data..
you need to give selection condition here
eg..
say select empname from table A, select empadd from table B.. where empno(from A)=empno(from B)
(note that you dont need to write queries like this.. i have just given u the example)
After creating the view you can create datasource in RSO2..
Regards
Swati

How to generate alerts from the oaf page

hii.......
I need to generate simple alert from oaf page...........
can u suggest me sample code for this????????

Hi Nazeer,
Nazeer again and again you are replying the same answer and again and again I'm asking you the same question.
What do you mean by alert?? is it some mail that you want to send from OAF page??
sample code to send mail from OAF:
import java.io.*;
import java.net.*;
* This program sends e-mail using a mailto: URL
public class SendMail {
public static void main(String[] args) {
try {
// If the user specified a mailhost, tell the system about it.
if (args.length >= 1) System.getProperties().put("mail.host", args[0]);
// A Reader stream to read from the console
BufferedReader in = new BufferedReader(new InputStreamReader(System.in));
// Ask the user for the from, to, and subject lines
System.out.print("From: ");
String from = in.readLine();
System.out.print("To: ");
String to = in.readLine();
System.out.print("Subject: ");
String subject = in.readLine();
// Establish a network connection for sending mail
URL u = new URL("mailto:" + to); // Create a mailto: URL
URLConnection c = u.openConnection(); // Create a URLConnection for it
c.setDoInput(false); // Specify no input from this URL
c.setDoOutput(true); // Specify we'll do output
System.out.println("Connecting..."); // Tell the user what's happening
System.out.flush(); // Tell them right now
c.connect(); // Connect to mail host
PrintWriter out = // Get output stream to mail host
new PrintWriter(new OutputStreamWriter(c.getOutputStream()));
// Write out mail headers. Don't let users fake the From address
out.println("From: \"" + from + "\" <"user.name") + "@" +
InetAddress.getLocalHost().getHostName() + ">");
out.println("To: " + to);
out.println("Subject: " + subject);
out.println(); // blank line to end the list of headers
// Now ask the user to enter the body of the message
System.out.println("Enter the message. " +
"End with a '.' on a line by itself.");
// Read message line by line and send it out.
String line;
for(;;) {
line = in.readLine();
if ((line == null) || line.equals(".")) break;
out.println(line);
// Close the stream to terminate the message
out.close();
// Tell the user it was successfully sent.
System.out.println("Message sent.");
System.out.flush();
catch (Exception e) { // Handle any exceptions, print error message.
System.err.println(e);
System.err.println("Usage: java SendMail [<mailhost>]");
Regards,
Reetesh Sharma
Edited by: Reetesh Sharma on Jun 30, 2010 3:27 AM

How to get description from the field name

Hello fellow SAP Fanatics,
I am trying to find an easy way to get the description of a field if I know the technical name. I know I can view them in tables but is there one place where I can just look up the field and get the description?
Thanks.

Hello
For all the tables, descriptions and fields you can refer to these tables:
DD02L : ALL SAP TABLE NAMES
DD02T : DESCRIPTION OF TABLE NAMES
DD03L : FIELDS IN A TABLE.
Moreover you can always goto the menu on the selection screen of the table and goto Settings > User Parameters > Key word > Field name / label
Hope this helps

How to find out the table from the field.

Hi Friends,
I want to know the table name from the field.
I mean i know the field with which i want to know the table. I tried but could find the structure only but how can i find the table.
Please guide me.
siva.

Hi Sivakumar,
Using DD03L (in SE16, SQVI) you can list the tables & structures which contain the desired field.
(If it's a very common field [e.g. MATNR] you'll get a huge amount of hits...you can also use 'F1' + 'Technical information' [in the transacton you are] to get information on table & field as mentioned before)
http://www.erpgenie.com/abap/tables.htm
BR
Csaba

How do I use pots on my client machine to change values, from the field, on my server machine and all other client machines?

I am using Lookout 4.5, build 12, and I am having a problem concerning pots. I have data tables created for the different size sewer stations my system monitors. For each station, there are setpoints for starting and stopping of the pumps. I want to be able to change the setpoints for a station on the client file using a pot and have it change on all other machines running Lookout. I did this in 3.8 using DDE, but I don't want to use DDE anymore.
I created a pot on the client file and URL'ed it to a pot on the server. On the server I created a table with a generic member "A" named "Lead Setp" and then created a member "A1" named
"C5_1LeadSetp" then a member "A2" named "C3_1LeadSetp" and so on....
In this table I connected the generic member "A" to the Pot I created on the server, and I connected A1 to its corresponding setpoint signal coming in from the field.
On the client file I connected (in the table similar to the one on the server but with all signals for the station) the "A1" member to the setpoint signal coming in from the field, and I connected the "A" member to the Pot I created on the client file which is URL'ed to the pot on the server file.
But, when I change the value of the pot on the client file, only the pot on the server and the "A" member in the table on the server change to the value of the pot on the client. The "A1" member whose screen I am changing the values from on the client does not change! This is the last thing I have to do and my file will be completely converted to 4.0. Does anyone have any ideas?
Thanks for any responses..
GBWY
Jason
Jason Phillips

Hi Jason,
If I understood your task correctly, you want to change the Setpoints on the Server DataTable using Pots from different clients. And also reflect these changes on the clients locally.
You correctly remoted the Pots on the Clients to the corresponding Pots on the Server. However, you do not need tables on your clients. All you need is Expressions on each client to the particular cell of the Clients.
So, to summarize: On the Server, the Pots write to the DataTable. And since the Pots on the Clients are remoted to these Pots on the Server, you can affect any change using these Pots. Because of the common remote source (Server Pots, i.e.) all of these Pots will always be in sync. Finally, to get the Setpoints on the Clients, just insert Expressio
ns to the Server's DataTable.
I am attaching a simple example (exmpl.zip) which does this. There are three processes -- My_Server, My_Client1, and My_Client2. I had them setup on the same machine so the paths are all process relative, but you can always change those to computer relative or absolute and move the client processes to diff machines.
Hope this helps.
Rgds,
Khalid
Attachments:
exmpl.zip ‏12 KB

How to Raise alert in XI when a new file reaches application server

Hey guys
i have a requirement in which i need to trigger a piece of ABAP code whenever a new file reaches a specific directory of Application server.
i m using File adapter on receiver side and i want to raise a trigger so that the ABAP code is executed automatically whenever some new file reaches the directory
we are running Win server
thanx
ahmad
Message was edited by:
Ahmad

HI,
It is possible to write a ABAP program to raise alert.and schedule it , In ABAP program we can check the file is existed or not in a specified folder if existes then we can raise Alert.Actually Alerts are maintained by SAP Alert Management only.
So , but not clear , you said you are using the File receiver adapter .
-- onoption is -this can bepossible with OS command .
-- also we can raise alert from Payload itself , why becz i understand whenever you are going to write a file with file adapter then you need to raise an alert right?
so if message is existed i mean data existed then from raise alert and store the file onoption
-- Also you can try calling an ABAP program as the auto-reaction method of the MTE in CCMS
Regards
Chilla
See the below links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/434fa590-0201-0010-1e9a-c27e6283a0fe
SMS through SAP ABAP program
XI Alert from BPM with Follow-Up Activity
ABAP programming BAPI To XML
How to send qRFC Alert to Internet Email from AP0 3.1 running 4.6D BASIS
/people/gregor.wolf3/blog/2005/03/05/create-users-in-an-abap-system-with-bapi-ostermiler-java-utilities

How to raise alert in BPM

Hi Experts,
Please tell me how to raise alert using control step in BPM. What are the other steps to be used with control step for raising alerts?
Is CCMS Alerts and Alerts by BPM are same? If they are not the same, how they are different to each other?
my requirement is, simply i want to raise a mapping, data related errors by Alert.
in addition to it, i want to raise alerts for any failure in IE.
Could any one tell , what are the sequence of steps needed in BPM for the above requirement? Plz take a IDOC to FTP receiver scenario and explain me BPM steps.
thnx
RAMS

Hi rams
for more details refer these
refer these link for more details about Alert
For email alerts
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
/people/sap.user72/blog/2005/01/14/alert-management--improving-monitoring-of-your-landscape
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
You have to do SMTP Configuration for EMail and SMS.....
http://help.sap.com/saphelp_nw04/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm
Alerts
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-stepCheck out these:
RWB- Alert Configuration LInk isnot working
Unable to login into Alert configuration
Get all the details here
CCMS ALERTS
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
/people/sap.user72/blog/2005/12/05/xi-grmg-customizing-for-xi-ccms-heartbeat-monitoring-part-ii
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
Alerts
transaction handling in XI
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
Auto triggering of alerts
transaction handling in XI
SCOT
not sending email from alert inbox
See this link : http://help.sap.com/saphelp_nw70/helpdata/en/da/a3a7408f031414e10000000a1550b0/frameset.htm
heck this weblogs on creating them and troubleshooting:
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9418d690-0201-0010-85bb-e9b2c1af895b
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
Further reference
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/content.htm
Also suggested go through the blog:Alerts with variables from the messages payload
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
/people/ginger.gatling/blog/2005/12/02/innovative-ways-to-use-alerts
/people/matt.kangas/blog/2006/06/27/personalized-alert-delivery
U may proceed in the following ways:
1. Reduce the securit settings of ur browser and enable the cookies
2. Try to SSO enable ur scenario
Have a look here:
SAP Note 840849
The configuration required as per ur patch level
SAP Note 913858
Check out these:
RWB- Alert Configuration LInk isnot working
Unable to login into Alert configuration
Thanks !!

HT3546 I can't figure out how to install bonjour from the CD that came with my airport express. Can anyone help?

I can't figure out how to install bonjour from the CD that came with my airport. Can anyone help?

If you are having difficulties installing Bonjour from the Installation CD, you can download the latest version of Bonjour from here.

How to delete data from single field in a database table?

Hi guys,
Plz suggest me How to delete data from single field in a database table?
thnks,
pavan

hi
in addition to abv details..chk this:
http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/eb3aef358411d1829f0000e829fbfe/content.htm
http://dev.mysql.com/doc/maxdb/en/34/ee7fbd293911d3a97d00a0c9449261/content.htm
regards,
madhu

HT1386 The first time I synced my iphone with my mac, I didn't realize that all of my photos from iphoto would transfer over to the phone. Now, I need to remove some, as they are taking up too much space. I cannot figure out how to remove them from the

The first time I synced my iphone 4 with my mac, I didn't realize that all of my photos from the iphoto library would transfer over to the phone (more than 3,000). Now, I need to remove some, as they are taking up too much space. I cannot figure out how to remove them from the phone. I tried to uncheck boxes and sync again, but I get a message that there is no room on the iphone. I've read as many articles as I can find, but still cannot manage this. Thanks for any help.

Open itunes, connect iphone, select what you want, sync

How to enter values in the fields of standard SAP Infotype e.g. IT0024

Hi,
How to enter values in the fields of standard SAP Infotype?
e.g. I want to enter values in infotype IT0024(Qualifications) in the field AUSPR(Profincy):-
1-Level 1
2-Level 2
3-Level 3
4-Level 4
5-Level 5
Thanks,
Ameet

Hi Divya,
I checked with the screen and report which is mentioned by you. But I want to modify/make changes that should appear in the screen when you view details for a particualar employee in Qualifications(IT0024).
Please refer the screen 2000 of module pool MP002400 in SE80. In that screen I want to make change as listbox with key.
Can it be achieved in the same way as mentioned by you before by making standard SAP report as Z and then modify using layout editor?
Please help me out. I think I am almost there.
Thanks,
Ameet

In Mail 7.3 on my Retina MacBook Pro on OS 10.9.4, how can I type from the keyboard into a mail message using the Apple Symbols font?

In Mail 7.3 on my Retina MacBook Pro on OS 10.9.4, how can I type from the keyboard into a mail message using the Apple Symbols font?
When I select the Apple Symbols font from the list accessed from under Format/"Show fonts"/collection-all fonts/Apple Symbol, and then continue typing, I get normal letters, if in a slightly different font.
How can I type using the Apple Symbol font? I want to use that font to include keyboard and cursor selections of actual screen symbols to help write easily understood explicit computer lesson emails to my 92 year-old mom from a few hundred miles away.
Steve

In Mail 7.3 on my Retina MacBook Pro on OS 10.9.4, how can I type from the keyboard into a mail message using the Apple Symbols font?
When I select the Apple Symbols font from the list accessed from under Format/"Show fonts"/collection-all fonts/Apple Symbol, and then continue typing, I get normal letters, if in a slightly different font.
How can I type using the Apple Symbol font? I want to use that font to include keyboard and cursor selections of actual screen symbols to help write easily understood explicit computer lesson emails to my 92 year-old mom from a few hundred miles away.
Steve

How to download apps from the philippine app store

how to download apps from the philippine app store. im here at the US and im using a US credit card

You can't do that from outside the Philippines.
(94063)

How to recover photos from the recycle bin ?

how to recover phontos from the recycle bin or how to find them on icloud ??

If you are using Photo Stream on your computer (Mac - logged into iCloud & Phtot Stream on / PC - installed iCloud Control Panel logged in and have Photo Stream turned on) then the photos you deleted should be safe and sound on your computer. Otherwise you may be out of luck.

How to Raise Alerts from the fields of Mapping?

Similar Messages

Maybe you are looking for